Black screen instead of post screen om GX620

here what happened:
i activated some file.
and i saw a message: bios verification/ deleting bios.
and after some time it wrote: bios is write protected, and the machine shut down.
all i can see is black screen.
its not starting, how i can fix it?
please help me, i don't know what to do.

Quote from: Vana on 29-April-11, 23:53:40
Yea its not from MSI, its from the ASUS or DFI or something, it was my brother "MOTHERBOARD FLASH BACKUP ****".
If i know what i going to "execute". no way i will even connect this usb stick into my laptop.
In two more days local reseller will become online, i will try to contact him for RMA or repairing.
Tnx LIGHT (or WORLD), it was pleasurably speaking with you.
Quote
Tnx LIGHT (or WORLD), it was pleasurably speaking with you.
  The 1st one
Quote from: Vana on 29-April-11, 23:53:40
Yea its not from MSI, its from the ASUS or DFI or something, it was my brother "MOTHERBOARD FLASH BACKUP ****".
If i know what i going to "execute". no way i will even connect this usb stick into my laptop.
In two more days local reseller will become online, i will try to contact him for RMA or repairing.
Yes do this.
In meantime you can try BIOS recovery, there is a good chance to recover since BIOS is really corrupted and damaged and recovery can kick off.
Download the BIOS for your notebook from MSI web: http://msi.com/service/download/bios-8539.html
Extract it, then rename A1651IMS.114 to A1651IMS.ROM
Then copy the A1651IMS.ROM to diskette and place it to the USB Floppy and connect the USB floppy with corespond diskette inside which contain A1651IMS.ROM to the an free USB port to the notebook.
Remove the notebook battery and leave only AC Power cord connected.
Then turn it on,[with battery disconnected and USB FDD attached with diskette inside] and leave it in that way for a 10 minutes.
If process is successfully, the notebook should bring back to the live itself after 10 minutes.

Similar Messages

  • Firefox opens to a black screen / Previous post is not helping

    Product Detected
    Intel® HD Graphics 3000
    I have thoroughly (I think) read the other posts / questions regarding this issue. Like others, I'm experience a completely black screen when opening the new version of Firefox. I can't do (or click on) anything...and it won't open in safe mode.
    I'm not very tech-savvy...but I did manage to get to the point where I had Intel do an auto-check to see about updating the graphics card (which was the other recommended fix).
    I have a four-year-old Lenovo ThinkPad, BTW. I got the following message:
    Current Driver Installed
    8.15.10.2321
    A customized computer manufacturer driver is installed on your computer. The Intel Driver Update Utility is not able to update the driver. Installing a generic Intel driver instead of the customized computer manufacturer driver may cause technical issues. Contact your computer manufacturer for the latest driver for your computer.
    Is there anything else I can do before I contact Lenovo (never fun). I guess not using Firefox is the obvious answer here...but it is my favorite browser. Urgh. Thanks in advance for any advice.

    hello, what is the exact product name/number of your thinkpad?

  • A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

    Hi 22chill,
    I recommend that we delete and re-download the movie from your purchase history:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Thanks,
    Matt M.

  • Black screen instead of TTYs after Xorg once started and leaved

    Hi,
    I've installed Arch on my laptop and experience following issue... I log in after boot and run "startx", then openbox starts properly. This is fine, but when I leave X, I can't see anything (TTY expected). I can switch to another TTY, login as root and type "reboot" or type "killall X", then log in as regular user and type "startx" to get openbox again. So there are TTYs obviously but I can't see anything but black screen.
    By leaving X (above) I mean...
    - typing "sudo killal X" in xterm
    - using openbox "Log Out" menu option
    - switching to another TTY by hitting Alt+Fn
    All of these lead to the same issue.
    I assume it's not Xorg problem, but I may be wrong of course. Is that driver related? I have Nvidia card and use proprietary drivers installed via pacman. Can anybody give me an advice where to look? Thanks a lot. I also attach (maybe relevant) outputs. If there is anything else needed to know please tell me and I'll post it.
    $ lspci
    00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
    00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
    00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
    00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
    00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
    00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
    00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
    00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
    00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
    00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
    00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
    00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
    00:09.0 SATA controller: nVidia Corporation Device 0ad5 (rev a2)
    00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
    00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
    00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
    00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
    00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
    00:15.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] HyperTransport Configuration (rev 40)
    00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h [Turion X2, Athlon X2, Sempron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Miscellaneous Control
    00:18.4 Host bridge: Advanced Micro Devices [AMD] Mobile K10 [Turion X2, Athlon X2, Sempron] Link Control
    02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 9100M G] (rev a2)
    03:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1)
    06:00.0 Network controller: RaLink RT2860
    07:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller
    07:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller
    07:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller
    07:00.3 System peripheral: JMicron Technology Corp. MS Host Controller
    08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    $ pacman -Qs nvidia
    local/libvdpau 0.4-1
    Nvidia VDPAU library
    local/nvidia 256.35-1
    NVIDIA drivers for kernel26.
    local/nvidia-utils 256.35-4
    NVIDIA drivers utilities and libraries.
    $ cat /var/log/Xorg.0.log.old
    [ 156.095]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 156.097]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 156.098] X Protocol Version 11, Revision 0
    [ 156.098] Build Operating System: Linux 2.6.34-ARCH x86_64
    [ 156.098] Current Operating System: Linux DrZoidberg 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 00:07:49 CEST 2010 x86_64
    [ 156.098] Kernel command line: root=/dev/sda5 ro
    [ 156.098] Build Date: 21 June 2010 12:01:49PM
    [ 156.099]
    [ 156.099] Current version of pixman: 0.18.2
    [ 156.099] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 156.099] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 156.101] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 4 15:57:39 2010
    [ 156.101] (==) Using config file: "/etc/X11/xorg.conf"
    [ 156.101] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 156.102] (==) ServerLayout "Layout0"
    [ 156.102] (**) |-->Screen "Screen0" (0)
    [ 156.102] (**) | |-->Monitor "Monitor0"
    [ 156.102] (**) | |-->Device "Device0"
    [ 156.102] (**) |-->Input Device "Keyboard0"
    [ 156.102] (**) |-->Input Device "Mouse0"
    [ 156.102] (==) Automatically adding devices
    [ 156.102] (==) Automatically enabling devices
    [ 156.102] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 156.102] Entry deleted from font path.
    [ 156.102] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 156.102] Entry deleted from font path.
    [ 156.102] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 156.102] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 156.102] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 156.102] (WW) Disabling Keyboard0
    [ 156.102] (WW) Disabling Mouse0
    [ 156.102] (II) Loader magic: 0x7ce880
    [ 156.102] (II) Module ABI versions:
    [ 156.102] X.Org ANSI C Emulation: 0.4
    [ 156.102] X.Org Video Driver: 7.0
    [ 156.102] X.Org XInput driver : 9.0
    [ 156.102] X.Org Server Extension : 3.0
    [ 156.110] (--) PCI: (0:0:1:3) 10de:0753:1462:6710 nVidia Corporation MCP78S [GeForce 8200] Co-Processor rev 162, Mem @ 0xf8e80000/524288
    [ 156.110] (--) PCI:*(0:2:0:0) 10de:0844:1462:6710 nVidia Corporation C77 [GeForce 9100M G] rev 162, Mem @ 0xf9000000/16777216, 0xc8000000/134217728, 0xc6000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072
    [ 156.110] (--) PCI: (0:3:0:0) 10de:06e9:1462:6710 nVidia Corporation G98 [GeForce 9300M GS] rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
    [ 156.110] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 156.110] (II) LoadModule: "extmod"
    [ 156.110] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 156.111] (II) Module extmod: vendor="X.Org Foundation"
    [ 156.111] compiled for 1.8.1.902, module version = 1.0.0
    [ 156.111] Module class: X.Org Server Extension
    [ 156.111] ABI class: X.Org Server Extension, version 3.0
    [ 156.111] (II) Loading extension MIT-SCREEN-SAVER
    [ 156.111] (II) Loading extension XFree86-VidModeExtension
    [ 156.111] (II) Loading extension XFree86-DGA
    [ 156.111] (II) Loading extension DPMS
    [ 156.111] (II) Loading extension XVideo
    [ 156.111] (II) Loading extension XVideo-MotionCompensation
    [ 156.111] (II) Loading extension X-Resource
    [ 156.111] (II) LoadModule: "dbe"
    [ 156.111] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 156.111] (II) Module dbe: vendor="X.Org Foundation"
    [ 156.111] compiled for 1.8.1.902, module version = 1.0.0
    [ 156.111] Module class: X.Org Server Extension
    [ 156.111] ABI class: X.Org Server Extension, version 3.0
    [ 156.111] (II) Loading extension DOUBLE-BUFFER
    [ 156.111] (II) LoadModule: "glx"
    [ 156.111] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 156.127] (II) Module glx: vendor="NVIDIA Corporation"
    [ 156.128] compiled for 4.0.2, module version = 1.0.0
    [ 156.128] Module class: X.Org Server Extension
    [ 156.128] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
    [ 156.128] (II) Loading extension GLX
    [ 156.128] (II) LoadModule: "record"
    [ 156.128] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 156.128] (II) Module record: vendor="X.Org Foundation"
    [ 156.128] compiled for 1.8.1.902, module version = 1.13.0
    [ 156.128] Module class: X.Org Server Extension
    [ 156.128] ABI class: X.Org Server Extension, version 3.0
    [ 156.128] (II) Loading extension RECORD
    [ 156.128] (II) LoadModule: "dri"
    [ 156.128] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 156.129] (II) Module dri: vendor="X.Org Foundation"
    [ 156.129] compiled for 1.8.1.902, module version = 1.0.0
    [ 156.129] ABI class: X.Org Server Extension, version 3.0
    [ 156.129] (II) Loading extension XFree86-DRI
    [ 156.129] (II) LoadModule: "dri2"
    [ 156.129] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 156.129] (II) Module dri2: vendor="X.Org Foundation"
    [ 156.129] compiled for 1.8.1.902, module version = 1.2.0
    [ 156.129] ABI class: X.Org Server Extension, version 3.0
    [ 156.129] (II) Loading extension DRI2
    [ 156.129] (II) LoadModule: "nvidia"
    [ 156.129] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 156.130] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 156.130] compiled for 4.0.2, module version = 1.0.0
    [ 156.130] Module class: X.Org Video Driver
    [ 156.130] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
    [ 156.130] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 156.130] (--) using VT number 7
    [ 156.134] (II) Primary Device is: PCI 02@00:00:0
    [ 156.134] (II) Loading sub module "fb"
    [ 156.134] (II) LoadModule: "fb"
    [ 156.134] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 156.134] (II) Module fb: vendor="X.Org Foundation"
    [ 156.134] compiled for 1.8.1.902, module version = 1.0.0
    [ 156.134] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 156.134] (II) Loading sub module "wfb"
    [ 156.134] (II) LoadModule: "wfb"
    [ 156.135] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 156.135] (II) Module wfb: vendor="X.Org Foundation"
    [ 156.135] compiled for 1.8.1.902, module version = 1.0.0
    [ 156.135] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 156.135] (II) Loading sub module "ramdac"
    [ 156.135] (II) LoadModule: "ramdac"
    [ 156.135] (II) Module "ramdac" already built-in
    [ 156.135] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 156.135] (==) NVIDIA(0): RGB weight 888
    [ 156.135] (==) NVIDIA(0): Default visual is TrueColor
    [ 156.135] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 156.135] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 156.135] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 156.135] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    [ 156.135] (II) NVIDIA(0): enabled.
    [ 156.360] (II) NVIDIA(0): NVIDIA GPU GeForce 9100M G (C77) at PCI:2:0:0 (GPU-0)
    [ 156.360] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 156.360] (--) NVIDIA(0): VideoBIOS: 62.77.2c.00.00
    [ 156.360] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 156.360] (--) NVIDIA(0): Connected display device(s) on GeForce 9100M G at PCI:2:0:0:
    [ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0)
    [ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
    [ 156.360] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
    [ 156.373] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 156.373] (==) NVIDIA(0):
    [ 156.373] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 156.373] (==) NVIDIA(0): will be used as the requested mode.
    [ 156.373] (==) NVIDIA(0):
    [ 156.374] (II) NVIDIA(0): Validated modes:
    [ 156.374] (II) NVIDIA(0): "nvidia-auto-select"
    [ 156.374] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
    [ 156.376] (--) NVIDIA(0): DPI set to (99, 97); computed from "UseEdidDpi" X config
    [ 156.376] (--) NVIDIA(0): option
    [ 156.376] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    [ 156.376] (--) Depth 24 pixmap format is 32 bpp
    [ 156.376] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 156.865] (II) NVIDIA(GPU-1): NVIDIA GPU GeForce 9300M GS (G98) at PCI:3:0:0 (GPU-1)
    [ 156.865] (--) NVIDIA(GPU-1): Memory: 524288 kBytes
    [ 156.865] (--) NVIDIA(GPU-1): VideoBIOS: 62.98.3c.00.00
    [ 156.865] (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X
    [ 156.865] (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
    [ 156.865] (--) NVIDIA(GPU-1): Connected display device(s) on GeForce 9300M GS at PCI:3:0:0:
    [ 156.865] (--) NVIDIA(GPU-1): none
    [ 156.866] (II) NVIDIA(0): Initialized GPU GART.
    [ 156.878] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 156.878] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 156.878] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 156.878] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 156.878] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 156.878] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 156.878] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 156.878] (II) NVIDIA(0): Config Options in the README.
    [ 156.879] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    [ 156.879] (II) NVIDIA(0): enough to receive ACPI hotkey events.
    [ 156.879] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
    [ 156.880] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 157.172] (II) Loading extension NV-GLX
    [ 157.208] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 157.216] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 157.216] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 157.216] (==) NVIDIA(0): Backing store disabled
    [ 157.216] (==) NVIDIA(0): Silken mouse enabled
    [ 157.232] (**) NVIDIA(0): DPMS enabled
    [ 157.232] (II) Loading extension NV-CONTROL
    [ 157.233] (II) Loading extension XINERAMA
    [ 157.233] (II) Loading sub module "dri2"
    [ 157.233] (II) LoadModule: "dri2"
    [ 157.233] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 157.233] (II) NVIDIA(0): [DRI2] Setup complete
    [ 157.233] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 157.233] (==) RandR enabled
    [ 157.233] (II) Initializing built-in extension Generic Event Extension
    [ 157.233] (II) Initializing built-in extension SHAPE
    [ 157.233] (II) Initializing built-in extension MIT-SHM
    [ 157.233] (II) Initializing built-in extension XInputExtension
    [ 157.233] (II) Initializing built-in extension XTEST
    [ 157.233] (II) Initializing built-in extension BIG-REQUESTS
    [ 157.233] (II) Initializing built-in extension SYNC
    [ 157.233] (II) Initializing built-in extension XKEYBOARD
    [ 157.233] (II) Initializing built-in extension XC-MISC
    [ 157.233] (II) Initializing built-in extension SECURITY
    [ 157.233] (II) Initializing built-in extension XINERAMA
    [ 157.233] (II) Initializing built-in extension XFIXES
    [ 157.233] (II) Initializing built-in extension RENDER
    [ 157.233] (II) Initializing built-in extension RANDR
    [ 157.233] (II) Initializing built-in extension COMPOSITE
    [ 157.233] (II) Initializing built-in extension DAMAGE
    [ 157.236] (II) Initializing extension GLX
    [ 157.423] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 157.423] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 157.423] (II) LoadModule: "evdev"
    [ 157.423] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 157.423] (II) Module evdev: vendor="X.Org Foundation"
    [ 157.423] compiled for 1.8.0, module version = 2.4.0
    [ 157.423] Module class: X.Org XInput Driver
    [ 157.423] ABI class: X.Org XInput driver, version 9.0
    [ 157.423] (**) Power Button: always reports core events
    [ 157.423] (**) Power Button: Device: "/dev/input/event5"
    [ 157.433] (II) Power Button: Found keys
    [ 157.433] (II) Power Button: Configuring as keyboard
    [ 157.433] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 157.433] (**) Option "xkb_rules" "evdev"
    [ 157.433] (**) Option "xkb_model" "evdev"
    [ 157.433] (**) Option "xkb_layout" "cz"
    [ 157.433] (**) Option "xkb_variant" "qwerty"
    [ 157.433] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.469] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 157.469] (II) No input driver/identifier specified (ignoring)
    [ 157.470] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 157.470] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 157.470] (**) Sleep Button: always reports core events
    [ 157.470] (**) Sleep Button: Device: "/dev/input/event3"
    [ 157.480] (II) Sleep Button: Found keys
    [ 157.480] (II) Sleep Button: Configuring as keyboard
    [ 157.480] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 157.480] (**) Option "xkb_rules" "evdev"
    [ 157.480] (**) Option "xkb_model" "evdev"
    [ 157.480] (**) Option "xkb_layout" "cz"
    [ 157.480] (**) Option "xkb_variant" "qwerty"
    [ 157.480] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.481] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 157.481] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 157.481] (**) Video Bus: always reports core events
    [ 157.481] (**) Video Bus: Device: "/dev/input/event6"
    [ 157.490] (II) Video Bus: Found keys
    [ 157.490] (II) Video Bus: Configuring as keyboard
    [ 157.490] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 157.490] (**) Option "xkb_rules" "evdev"
    [ 157.490] (**) Option "xkb_model" "evdev"
    [ 157.490] (**) Option "xkb_layout" "cz"
    [ 157.490] (**) Option "xkb_variant" "qwerty"
    [ 157.490] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.490] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 157.490] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 157.490] (**) Video Bus: always reports core events
    [ 157.490] (**) Video Bus: Device: "/dev/input/event7"
    [ 157.500] (II) Video Bus: Found keys
    [ 157.500] (II) Video Bus: Configuring as keyboard
    [ 157.500] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 157.500] (**) Option "xkb_rules" "evdev"
    [ 157.500] (**) Option "xkb_model" "evdev"
    [ 157.500] (**) Option "xkb_layout" "cz"
    [ 157.500] (**) Option "xkb_variant" "qwerty"
    [ 157.500] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.501] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 157.501] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 157.501] (**) Power Button: always reports core events
    [ 157.501] (**) Power Button: Device: "/dev/input/event4"
    [ 157.510] (II) Power Button: Found keys
    [ 157.510] (II) Power Button: Configuring as keyboard
    [ 157.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 157.510] (**) Option "xkb_rules" "evdev"
    [ 157.510] (**) Option "xkb_model" "evdev"
    [ 157.510] (**) Option "xkb_layout" "cz"
    [ 157.510] (**) Option "xkb_variant" "qwerty"
    [ 157.510] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.512] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
    [ 157.512] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 157.512] (**) Logitech USB Receiver: always reports core events
    [ 157.512] (**) Logitech USB Receiver: Device: "/dev/input/event9"
    [ 157.523] (II) Logitech USB Receiver: Found keys
    [ 157.523] (II) Logitech USB Receiver: Configuring as keyboard
    [ 157.523] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    [ 157.523] (**) Option "xkb_rules" "evdev"
    [ 157.523] (**) Option "xkb_model" "evdev"
    [ 157.523] (**) Option "xkb_layout" "cz"
    [ 157.523] (**) Option "xkb_variant" "qwerty"
    [ 157.523] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.524] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event10)
    [ 157.524] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 157.524] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 157.524] (**) Logitech USB Receiver: always reports core events
    [ 157.524] (**) Logitech USB Receiver: Device: "/dev/input/event10"
    [ 157.536] (II) Logitech USB Receiver: Found 20 mouse buttons
    [ 157.536] (II) Logitech USB Receiver: Found scroll wheel(s)
    [ 157.536] (II) Logitech USB Receiver: Found relative axes
    [ 157.536] (II) Logitech USB Receiver: Found x and y relative axes
    [ 157.536] (II) Logitech USB Receiver: Found absolute axes
    [ 157.536] (II) Logitech USB Receiver: Found keys
    [ 157.536] (II) Logitech USB Receiver: Configuring as mouse
    [ 157.536] (II) Logitech USB Receiver: Configuring as keyboard
    [ 157.536] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 157.536] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 157.536] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
    [ 157.536] (**) Option "xkb_rules" "evdev"
    [ 157.536] (**) Option "xkb_model" "evdev"
    [ 157.536] (**) Option "xkb_layout" "cz"
    [ 157.536] (**) Option "xkb_variant" "qwerty"
    [ 157.536] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.537] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 157.537] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 157.537] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 157.537] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 157.537] (II) Logitech USB Receiver: initialized for relative axes.
    [ 157.537] (WW) Logitech USB Receiver: ignoring absolute axes.
    [ 157.537] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
    [ 157.537] (II) No input driver/identifier specified (ignoring)
    [ 157.538] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/event11)
    [ 157.538] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev keyboard catchall"
    [ 157.538] (**) MLK EU3C Wireless Office 200: always reports core events
    [ 157.538] (**) MLK EU3C Wireless Office 200: Device: "/dev/input/event11"
    [ 157.553] (II) MLK EU3C Wireless Office 200: Found keys
    [ 157.553] (II) MLK EU3C Wireless Office 200: Configuring as keyboard
    [ 157.553] (II) XINPUT: Adding extended input device "MLK EU3C Wireless Office 200" (type: KEYBOARD)
    [ 157.553] (**) Option "xkb_rules" "evdev"
    [ 157.553] (**) Option "xkb_model" "evdev"
    [ 157.553] (**) Option "xkb_layout" "cz"
    [ 157.553] (**) Option "xkb_variant" "qwerty"
    [ 157.553] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.554] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/event12)
    [ 157.554] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev pointer catchall"
    [ 157.554] (**) MLK EU3C Wireless Office 200: Applying InputClass "evdev keyboard catchall"
    [ 157.554] (**) MLK EU3C Wireless Office 200: always reports core events
    [ 157.554] (**) MLK EU3C Wireless Office 200: Device: "/dev/input/event12"
    [ 157.566] (II) MLK EU3C Wireless Office 200: Found 9 mouse buttons
    [ 157.566] (II) MLK EU3C Wireless Office 200: Found scroll wheel(s)
    [ 157.566] (II) MLK EU3C Wireless Office 200: Found relative axes
    [ 157.566] (II) MLK EU3C Wireless Office 200: Found x and y relative axes
    [ 157.566] (II) MLK EU3C Wireless Office 200: Found absolute axes
    [ 157.566] (II) MLK EU3C Wireless Office 200: Found keys
    [ 157.566] (II) MLK EU3C Wireless Office 200: Configuring as mouse
    [ 157.566] (II) MLK EU3C Wireless Office 200: Configuring as keyboard
    [ 157.566] (**) MLK EU3C Wireless Office 200: YAxisMapping: buttons 4 and 5
    [ 157.566] (**) MLK EU3C Wireless Office 200: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 157.566] (II) XINPUT: Adding extended input device "MLK EU3C Wireless Office 200" (type: KEYBOARD)
    [ 157.566] (**) Option "xkb_rules" "evdev"
    [ 157.566] (**) Option "xkb_model" "evdev"
    [ 157.566] (**) Option "xkb_layout" "cz"
    [ 157.566] (**) Option "xkb_variant" "qwerty"
    [ 157.566] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.567] (**) MLK EU3C Wireless Office 200: (accel) keeping acceleration scheme 1
    [ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration profile 0
    [ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration factor: 2.000
    [ 157.567] (**) MLK EU3C Wireless Office 200: (accel) acceleration threshold: 4
    [ 157.567] (II) MLK EU3C Wireless Office 200: initialized for relative axes.
    [ 157.567] (WW) MLK EU3C Wireless Office 200: ignoring absolute axes.
    [ 157.567] (II) config/udev: Adding input device MLK EU3C Wireless Office 200 (/dev/input/mouse2)
    [ 157.567] (II) No input driver/identifier specified (ignoring)
    [ 157.567] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
    [ 157.567] (II) No input driver/identifier specified (ignoring)
    [ 157.573] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 157.573] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 157.573] (**) AT Translated Set 2 keyboard: always reports core events
    [ 157.573] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 157.580] (II) AT Translated Set 2 keyboard: Found keys
    [ 157.580] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 157.580] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 157.580] (**) Option "xkb_rules" "evdev"
    [ 157.580] (**) Option "xkb_model" "evdev"
    [ 157.580] (**) Option "xkb_layout" "cz"
    [ 157.580] (**) Option "xkb_variant" "qwerty"
    [ 157.580] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 157.580] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    [ 157.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 157.580] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 157.580] (II) LoadModule: "synaptics"
    [ 157.580] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 157.581] (II) Module synaptics: vendor="X.Org Foundation"
    [ 157.581] compiled for 1.8.0.902, module version = 1.2.2
    [ 157.581] Module class: X.Org XInput Driver
    [ 157.581] ABI class: X.Org XInput driver, version 9.0
    [ 157.581] (II) Synaptics touchpad driver version 1.2.2
    [ 157.581] (**) Option "Device" "/dev/input/event8"
    [ 157.620] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    [ 157.620] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    [ 157.620] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 157.620] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 157.620] (II) SynPS/2 Synaptics TouchPad: buttons: left right
    [ 157.620] (**) Option "TapButton1" "1"
    [ 157.620] (**) Option "TapButton2" "2"
    [ 157.620] (**) Option "TapButton3" "3"
    [ 157.646] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 157.646] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 157.660] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 157.660] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 157.686] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 157.686] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 157.686] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 157.686] (II) Synaptics touchpad driver version 1.2.2
    [ 158.333] SynPS/2 Synaptics TouchPad no synaptics event device found
    [ 158.333] (**) Option "Device" "/dev/input/mouse0"
    [ 158.346] (**) Option "TapButton1" "1"
    [ 158.346] (**) Option "TapButton2" "2"
    [ 158.346] (**) Option "TapButton3" "3"
    [ 158.366] Query no Synaptics: 6003C8
    [ 158.366] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
    [ 158.367] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
    [ 158.406] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
    [ 158.406] (II) UnloadModule: "synaptics"
    [ 158.406] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 158.406] (II) No input driver/identifier specified (ignoring)
    [ 222.970] (II) Power Button: Close
    [ 222.970] (II) UnloadModule: "evdev"
    [ 222.990] (II) Sleep Button: Close
    [ 222.990] (II) UnloadModule: "evdev"
    [ 223.016] (II) Video Bus: Close
    [ 223.016] (II) UnloadModule: "evdev"
    [ 223.036] (II) Video Bus: Close
    [ 223.036] (II) UnloadModule: "evdev"
    [ 223.056] (II) Power Button: Close
    [ 223.056] (II) UnloadModule: "evdev"
    [ 223.076] (II) Logitech USB Receiver: Close
    [ 223.076] (II) UnloadModule: "evdev"
    [ 223.096] (II) Logitech USB Receiver: Close
    [ 223.096] (II) UnloadModule: "evdev"
    [ 223.116] (II) MLK EU3C Wireless Office 200: Close
    [ 223.116] (II) UnloadModule: "evdev"
    [ 223.136] (II) MLK EU3C Wireless Office 200: Close
    [ 223.136] (II) UnloadModule: "evdev"
    [ 223.156] (II) AT Translated Set 2 keyboard: Close
    [ 223.156] (II) UnloadModule: "evdev"
    [ 223.190] (II) UnloadModule: "synaptics"
    $ cat /etc/X11/xorg.conf
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 256.35 ([email protected]) Wed Jun 16 19:15:05 PDT 2010
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection

    I was having this exact same problem, then it just stopped. I am using the nouveau driver and I have a tnt2 card.
    IIRC, I was having an unrelated problem with xorg or udev or something was having problems detecting my monitor, it claimed I had two monitors connected, I wrote an xorg.conf file and that fixed the problem. IDK if its is related or not because I don't recall exactly when things started working when I would switch ttys.
    Try using the nouveau driver and see if it does the same thing, it has a kernel module so it might make difference,
    Last edited by RiceKills (2010-07-06 23:39:27)

  • I have an iphone 4s why does it have a black screen instead of my background picture when I get a text message?

    I have an iphone 4S why does it have a black screen instead of my background picture when I get a text message?

    When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.

  • Black screen instead login prompt on GMA 500

    Cann't boot latest installation media. Computer is DSA-3020 with POULSBO GMA500 graphics.
    I tryied almost everything nomodeset, quiet splash, acpi=off, acpi_osi=Linux, mem=896mb, vga=771....
    Interesting is that I see all outputs during kernel boot.
    Black screen comes only instead Login prompt.
    Last edited by nick81 (2013-02-03 11:47:45)

    nick81 wrote:
    nick81 wrote:Some new information.. Today I connected it to monitor with 1680x1050 and everything works ok (DVI).
    Yesterday problems was on plasma FullHD (DVI to HDMI reduction).
    Did you solve this thing ? I have same trouble.
    Hey, you made my day... Couldn't stop laughing for some time

  • I want image instead of black screen when video ends.

    Hi guys,
    I am wondering how you place an image at the end of a VC video. I tried placing several images at the end of a recording but it always ends with a black screen when it is produced. Here is the video I am working on and I want the last text you see to stay on screen instead of the black screen.
    Thanks Gary Garnett

    Gary and all,
    See response here for your question:
    http://groups.google.com/group/TeachMeVC/browse_thread/thread/d557f284b35e911c#
    And consider joining our Disussion Group for VC users at http://www.TeachMeVC.com

  • Ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully

    ipod 4.3.1 : after playing a video, i couldn't get the replay button, instead of that i get black screen fully

    Have you tried resetting your iPod: Nothing will be lost:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • I want images instead of black screen on VC video.

    Hi,
    I made a video with VC but I want an image instead of a black screen when it is producd. I tried ending my production with various images but when it is produced there is always a black screen. Any help would be appreciated. Here is my video I am working on- http://www.computertuneupvideos.com
    Thanks
    Gary Garnett

    Gary and all,
    See response here for your question:
    http://groups.google.com/group/TeachMeVC/browse_thread/thread/d557f284b35e911c#
    And consider joining our Disussion Group for VC users at http://www.TeachMeVC.com

  • Dell Latitude E6510 Black screen before posting during cold boot

    When I cold boot my laptop,I get about 10sec of black screen before the laptop posts..1st gen. i5 core,4gb DDR3 80GB Intel X25-M Nvidia NVS 3100 graphics with 512MB RAM.

    I received a new XPS13 9343 last week and unpacked it yesterday (Friday 4/24/2015). When I first opened the lid and powered it up there was no display. It was completely black, not blank. I went to close the lid and when slightly jarring it I noticed that the initial screen appeared but briefly.
    After analyzing the symptom I decided:
    It is a physical issue - not firmware related
    While I apply very slight pressure compressing the lower right corner of the display it will function
    It is the LCD backlight that is intermittent as the image is perfect otherwise and turns on an off with pressure not quite instantaneously
    Once the laptop warms (2 minutes) the display becomes completely reliable and unaffected by lid motion
    My bet is that this is a problem with the conductive rubber mounting strip used to make the many connections to the LCD panel. Envision a very thin foam double sided tape with the characteristic that current can only flow front to back through the thin dimension of the tape. Adjacent pads (connection points) are not shorted by the tape and pads (carefully) aligned on the other side of the tape are connected. Its very ingenious actually.
    In my case probably the circuit for the LCD backlight is at the end of a strip on the bottom right. It didn't properly bond during production. Probably once current flows through it (when I compress the display or hold the lid in just the right position) the adhesive warms and grabs hold. It probably doesn't take much to pass the low currents involved. I wonder if after some use or exposure to warmer operating conditions if it might not finally bond permanently and the issue go away?
    Anyway this is what happens when you present an engineer with a problem, it gets over analyzed. You would like to think that within hours of posting this a bunch of production engineers will run over to all of the fixtures in their facilities that are used to assemble the displays and make sure there isn't one out of adjustment. Uneven clamping force or some such science.
    The problem now for me is in finding out if I need to replace it and how much of a pain that is going to be. Unfortunately now I don't want to migrate from my prior laptop if I am going to have to send this one off someplace.
    In some way this represents a security feature. Haha. I mean there is a trick to getting the thing to come up that I would only know. Another level of security at no extra charge. Still, one wishes to not have a quality concern floating in the back of your mind.
    But, this might be your issue too. Anyone else have this experience?

  • Post update to iOS 8, i get black screen when I reject or miss a call...how to get rid of this...?

    post update to iOS 8, i get black screen when I reject or miss a call...how to get rid of this...?

    Do a sync and backup first.

  • Pro won't start.  Instead get a black screen and a beeping every 2 seconds. LIght at front right corner of keyboard flashes in sequence with beeping.

    Pro won't start.  Instead get a black screen and a beeping every 2 seconds.  Light at front right corner of keyboard flashes in sequence with beeping.

    If it is giving a single beep every two seconds, then it is not seeing any of the memory.  You could try taking the back off, remove the memory module and reinsert to see if that corrects the problem.  Or just take it to an Apple store genius bar and have the techs do that for you.
    If you are uncertain about working on the memory modules, you can find on-line videos for doing so at OWC, http://www.macsales.com where you can see the procedure for your year, make and model of MacBook Pro.

  • Msi a78m-e35 no post, just running fans and black screen.

    Here is my information, my motherboard doesn't post. I've tried with everything installed initially, and then I took it out of the case and just tried the power supply, RAM, and CPU plugged into the monitor with same results. I have the speaker plugged in. I don't hear any beeps, and the monitor just shows a black screen
    What should I do?
    Motherboard:MSI A78M-E35 FM2+ / FM2 AMD A78 (Bolton D3) HDMI SATA 6Gb/s USB 3.0 Micro ATX AMD
    Serial # (minus last 3 digits): 601-7721-150B1411002
    CPU: AMD FM2 Socket Quad-Core A8-Series APU A8-6600K with Radeon HD 8570D
    Power: Corsair Builder Series CX 430 Watt ATX/EPS 80 PLUS
    RAM: Crucial Ballistix Sport 8GB Kit (4GBx2) DDR3 1600 MT/s (PC3-12800) CL9 @1.5V UDIMM 240-Pin Memory

    Quote from: crazyhusker on 11-January-15, 02:55:42
    Exactly how do i RMA the board? Can I just send it back from where I purchased it?
    Hold up there buddy, dont rma it yet. I have the same board, had the same problem straight out of box. MSI sent out a batch of those boards with the wrong jumper settings. Look on your motherboard near the rear  ios inputs. look for a header labeled jusb-pw2. flip that jumper to the top two pins and clear the cmos and you should be good

  • Z77 mpower replaced, black screen after post.

    Ok so I've loved my setup for a year solid, until the other day when my Z77 Mpower started smoking from under one of the heatspreaders. I'm all set for an RMA, but in the meantime I had to buy another Mpower board. This is my work PC, and I cannot wait the 2+ weeks for a replacement. So I bought another mobo of the same model and just got done swapping everything out. Now I get post fine, but when loading windows I just get a black screen.
    I've:
    Updated bios to latest
    Taken out all but one stick of RAM
    Tried both on-board and discreet GPU
    Tried safe mode (stops at "please wait" and doesn't go any further)
    Tried startup repair (black screen)
    Tried reinstalling windows (freezes after "Windows is loading files..." at the "Starting Windows" screen.
    My drives and such all show up fine in bios. No errors on the board. I don't hear the windows chime when trying to boot windows normally.
    4 or 8gb ddr3, MSI 670GTX, mushkin 240gb SSD(boot), 640gb WD HD(data)
    Please help, as this PC is my Iivelyhood and sanity.
    Matt

    Update: after clean memtest and trying everything under the sun including a new PSU, I've finally made a discovery. I can finally boot to OS if I enable only 1 core of the procesor. This is under CPU features of the overclock menu.
    Now I'll reseat the CPU, check for bent pins, etc. If this changes nothing, do I assume that my CPU is damaged or there's something wrong with the new board? I guess the only way to know for sure is to have another CPU or board, of which I have neither at this time.

  • X58A-GD45 won't post, no beep, no signal-black screen

    Hello everyone,
    Been having troubles with motherboard that I just picked up to replace my old EVGA board since it decided to call it quits. When I start my system, it's a black screen with no post or beeping with the monitors remaining blank.
    My system specs are as follows:
    i7 930 @2.8GH
    Hyper 212+ HSF
    6GB DDR3 G-Skill 1600
    850 Watt ThermalTake BW
    SLI GTX 460 1GB
    Seagate 320GB Barracuda
    1TB WD Green Edition
    Philips DVD/CD Drive
    Now, I've tested all of my parts out on a separate machine and they all checked out fine.As for this build, I've tried different PCI-E ports with my GTX 460 GFX cards, with and without my HDD's plugged in, tried different sticks of ram in DIMM slot 0, plugging in and unplugging additional adapters like front header USB and sound, tried reseating all of the power connectors and plugs.
    At the moment, the only thing that is on my board right now, is one 2GB stick of DDR3 in DIMM slot 0, CPU, one GTX 460, an HDD and my keyboard.
    I've already tried searching the forums for relevant topics and only came up with one that was somewhat relevant
    https://forum-en.msi.com/index.php?topic=144599.0
    Quote from: sastraxi on 10-January-11, 11:19:15
    The problem? bent pins on the mainboard
    Not particularly sure what pins he is talking about.

    Quote from: Henry on 09-April-11, 09:17:22
    I'm pretty sure he's referring to the pins in the CPU socket. Re-seat the CPU and check the socket with a magnifier for any bent/damaged pins wen you get the CPU out. Best to remove the MB from the case to do this and before you re-install it all back in the case test and make sure everything works.
    That what I figured he was alluding to. Well, I've removed the mobo from the case and the CPU from the socket. I inspected it a magnifier tool I have - all of the pins appear to be fine; no bending or damage.
    **EDIT: Replaced the mobo battery and it posts. Looks like the mystery is solved.  Thank you Henry for offering some assistance, I appreciate it.

Maybe you are looking for

  • How do I put audio memos from an ipad onto icloud?

    How do I put audio memos from an ipad onto icloud?

  • How to install BitDefender? (x86_64)

    Hi all, I want to test BitDefender on my system and have downloaded two files which appear to be wrapped rpm and deb files: BitDefender-Antivirus-Scanner-7.6-4.linux-gcc4x.amd64.deb.run BitDefender-Antivirus-Scanner-7.6-4.linux-gcc4x.amd64.rpm.run Is

  • Non-English string access from excel sheet through JDBC

    My excel sheet data is Test ������������ I am using JDBC connectivity for accessing the Excel sheet. Code looks like, List Output = new List(); try Class.forName( "sun.jdbc.odbc.JdbcOdbcDriver" ); c = DriverManager.getConnection( "jdbc:odbc:qa-list",

  • FM HR_READ_INFOTYPE to read records from 3 infotypes

    Hi all, I am writing a report using PNP as my LDB. So there is a selection screen which can takes in the pernr and the dates as begda and endda. Based on this scenario, how do you normally use this FM 'HR_READ_INFOTYPE' to all the records from let sa

  • Error when selecting detailed navigation menu item

    Hi, Usually on selection of a menu item from detailed navigation an iview appears which contains values from an R/3 system, but now when i select any item for the detailed navigation i get a download pop up window which  ask me to save the page. When