Black Screen (no logo) then flashing white screen then a greyish screen and never comes on.

I left my iPod in my room for a few hours while it played my music. When I came back i assumed the battery so I charged it. Checked on it again and the ipod displayed a blank white screen. I looked up online how to reset/reboot it and tried it my self, but that didnt work. What happend next was that the ipod dispayed the black screen but no Apple logo. So i tried the reset/reboot process again then the screen flashed a white screen about 3 times then changed to a grey color. But cant access anything. What should I do.

If it is still charging, connect it to the adapter for 15min, then connect to your computer in recovery mode, explained here: iPhone and iPod touch: Unable to restore

Similar Messages

  • My phone went to a black screen and wont come back on, how do i fix it?

    At first, out of know where, it went to a white screen with a blach apple. Then Iplugged my phone into my computer and reset my phone and my home button or lock button wont work. Now its just on a black screen and wont turn back on. How do i fix this probkem with my phone?

    mckenzie8 wrote:
    my home button or lock button wont work.
    Won't work or are Broken ?

  • My ipod touch wont turn on!! the apple logo appears for five seconds and then it goes to a black screen and it has been repeating this when im not even touching it!! help!!

    my ipod touch wont turn on! i pressed the power button and the white apple logo appeared for five seconds and went to a black screen, and then back to the logo for 5 secs and back to the black screen for 5 secs. im not touching my ipod and it is still doing this. i did leave it onover night to update ios, is this why??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?

    My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
    Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My Mac mini starts up with a black screen and white writing.

    Okay basically I purchased a Mac mini (Intel Core 2 Duo 1.8GHZ 1GB RAM model) in Feburay 2008, and in June 2008 i decieded to bring it to a store to get it upgraded to 2GB. At the store the guys told me my Mac mini wouldnt accept 2GB, they reckon it was 'cause of the logic board. So they put a new one in and was able to succesfully install 2GB.
    Since that day my Mac mini stopped starting up with the apple logo. Now it starts up with the white/greyish background without the apple logo, then goes to a black screen and just runs pass loads of white text then its ready to use with no problems. It does this all the time.
    I've read a little about the Kernal Panic and looked at pictures of it, but what I have doesn't look like the kernal panic pictures i'm seeing.
    So i am writing this pose to find out whats wrong with my Mac mini, can anyone help me?
    Oh, I nearly forgot. When i turn the Mac mini off it does the same black screen with white text stuff before fully shutting down.

    Restart the computer with the Option, Command, P, and R keys held down, and release them when you hear the second startup chime; this clears a setting which causes it to start up into verbose mode each time.
    (35613)

  • 2nd ATV displays black screen and apple logo on initial start up

    I just hooked up my 2nd ATV and all I am getting is a black screen with the apple logo. I am using component video and composite audio. No HDMI hooked up. 1st ATV is unplugged. Also have network cable plugged in for now. Using timecapsule for wireless network. This is a second hand ATV, so it has been previously used and configured. I also attempted to hook up using an HDMI, but same result. I am not sure if the unit is trying to find the previous users network or not. The amber light flashes indicating start up. Nothing else on the screen, no question mark, rotating circle, just the logo. Every few minutes the screen goes blue (assuming it is my TV default colour) and then returns to the black screen and logo. I am on the correct TV input. Also tried, menu + '+' and menu + - on the remote for factory restore and screen settings.

    melbri wrote:
    I hope you are reffering to the possibility that the person I purchased the unit from may be a thief. I am working with him at the moment and building up to getting my cash back so he can deal with Apple. Thanks.
    Sorry if my comments were misunderstood, I wasn't suggesting anyone was a thief, I was suggesting that without a receipt the store couldn't/shouldn't rely on the serial number to exchange/refund the tv, as proof of purchase.

  • My ipod only shows a black screen and an apple logo

    My ipod only shows a black screen and an apple logo. It wont connect to iTunes, and charging doen't work. HELP PLEASE!

    Try a reset. Hold the home and power buttons at the same time until the screen goes dark for a moment, then the Apple boot logo should reappear. If it doesn't work, it's broken, take it to the Apple store or another authorized repair service.

  • I have a 25" 2.8 GHz Intel core 2 Duo working on OS X 10.8.4, within past 2 days we've had the black screen and the white screen, we are up and kicking again but I can leave the computer playing music from iTunes, but within 10 minutes the screen is back.

    I have a 25" 2.8 GHz Intel core 2 Duo working on OS X 10.8.4, within past 2 days we've had the black screen and the white screen, we are up and kicking again but I can leave the computer playing music from iTunes, but within 10 minutes the screen is back, yet the music is still playing in the background. I can't get rid of the black screen unless I force quit the computer, then it starts ok. Then the process starts all over again.

    I have a 25" 2.8 GHz Intel core 2 Duo working on OS X 10.8.4, within past 2 days we've had the black screen and the white screen, we are up and kicking again but I can leave the computer playing music from iTunes, but within 10 minutes the screen is back, yet the music is still playing in the background. I can't get rid of the black screen unless I force quit the computer, then it starts ok. Then the process starts all over again.

  • TS3274 my ipad has a black screen and the apple logo and won't do anything else. I have tried to reset it but to no avail.

    My ipad has a black screen and the apple logo and won't do anything else. I have tried to reset to no avail.

    Try and force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • The ipad2 shows the white apple symbol on a black screen and i cannt connect to the computer any more

    the ipad2 shows the white apple symbol on a black screen and i cannt connect to the computer any more

    Hi Apple_Bayern,
    Thanks for using Apple Support Communities.  This article has some information on what to do if your iPad will not get past the Apple logo at startup:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    - Ari

  • Bios update failore with black screen and 3 time flashing, my product name is (Pavilion g6-2162se) .

    Hi
    I have Hp Laptop, my product name is (Pavilion g6-2162se), I downloaded The drivers from the page, when I installed all drivers, the bios updatede to, but its failore, and now my computer not working means with black screen and 3 time flashing .
    please help

    Hi,
    Check if this helps:
    Restoring the BIOS
    If it is blinking 3 times it usually indicates memory issue..So you can try reseating the memory modules or try one memory at a time in each slot..
    Refer the links below:
    HP Notebook PCs - Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
    Removing and Replacing a Memory Module for HP Pavilion g6-2000, g6-2100, g6-2200 and g6-2300 Noteboo...
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • Pro won't start.  Instead get a black screen and a beeping every 2 seconds. LIght at front right corner of keyboard flashes in sequence with beeping.

    Pro won't start.  Instead get a black screen and a beeping every 2 seconds.  Light at front right corner of keyboard flashes in sequence with beeping.

    If it is giving a single beep every two seconds, then it is not seeing any of the memory.  You could try taking the back off, remove the memory module and reinsert to see if that corrects the problem.  Or just take it to an Apple store genius bar and have the techs do that for you.
    If you are uncertain about working on the memory modules, you can find on-line videos for doing so at OWC, http://www.macsales.com where you can see the procedure for your year, make and model of MacBook Pro.

  • Iphone is a black screen and the apple logo won't show on screen

    My iPhone has a black screen and the apple logo does not appear. it keeps saying voice overb run or mute on mute off.

    Hey there Maggie,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the blank black screen issue with your iPhone 6 Plus.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Cheers,
    -Jason

  • I tried to update my ipad software whilst connected to my computer. There was an error and now my ipad is frozen with a black screen and a white apple. it will not even power up. Help

    I connected my ipad to my laptop in the hopes of dowloading some photos i needed. It invited me to back up my data and update to ios 7.0.6. After 2 hours to download the software it then tried to install it and encountered an error. The ipad is now frozen to a black screen and the apple symbol. i cannot even power it off. What on earth can I do?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    Also, do you remember what the error message said?

  • I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
    http://support.apple.com/kb/ht1661
    http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
    http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive

Maybe you are looking for

  • How do i make a button open a new window...

    Hi, I'm making some very basic login software and i want the program to open up a new window when the "Login" button is pressed and then display a message saying whether the login was successful or not. Any help would be appreciated but i would love

  • Is it possible to purchase just photoshop (Mac) as a disk or download?

    I need CS3 or later but want new - not a used product, having read about licensing and installation problems. I don't need the entire CS, just Photoshop. Elements are too limited. Thanks!

  • Returning multiple items

    I am working on a script that does extensive logging, both to the console and to a log file. For a number of reasons I have adopted a logging mechanism of adding to a logging array and then periodically pushing the array to the logging function for p

  • SQL*Plus/iSQL*Plus login as DBA

    I just installed 10g Enterprise on a Windows platform and am a bit confused to why I cannot log into SQL*Plus/iSQL as a DBA. I can login as one of the user accounts then use 'connect' to login as dba in SQL*Plus or at the Windows command prompt. I ca

  • FILE SYSTEM BACKUP IS HANGING ON OSB

    Hi all i am having a test setup for OSB ( using windows 2003 ent 32 bit , administrative server + mediaserver ) , i am using HP c1537a scsi Tape drive ( driver details Microsoft 10/1/2012 version 5.2.3790.0 ) , and while firing the file system backup