Black screen nothing working

my ipod touch was hot at the bottom rear when i picked it up. for no reason. the display worked ok but didnt let me slide to unlock or slide to switch off. i have since fully charged it, fully discharged it several times and the screen remains black no matter which buttons i press. i have tried the reset by pressing top and bottom button for 10 seconds still nothing happening. It is now not recognised by the computer when i switch it on. or the tone from the computer when the usb is connected. iv not dropped or damaged the ipod in any way. any help here would be appreciated. thanks in advance, kevin

I agree, the black screen with 3beep error is a very common problem and the only solution is a replacement board. I suggest you read some of the other topics in this forum on the subject, many have good and useful info in them and there is also a lot of misinformation out there too, as well as an abundance of improperly repaired boards, so it's best to educate yourself before looking into repair options.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Similar Messages

  • IPod has a black screen, nothing working, can't reset or restore

    I have had my iPod for almost a year, and this is the first problem I've had with it. It showed a white screen for a day, but then it went black, and nothing is working on it. When I connect it to my computer, nothing shows up on the iPod about it being connected, or on the laptop. Anyone know what to do??

    Hello. My iPod nano 4G 8GB has the same EXACT problem. I can't seem to fix it. Apple told me t switch to hold then, switch to on/off then, press MENU and OK buttons for 6-10 seconds to turn it off... I did this and it happened. ...  Unfortunatly, I don't know what to do next.

  • T61p black screen, nothing working

    My 8-year-old D has a Lenovo T61p Thinkpad. When she went to boot it up today all it did was give three beeps and then nada. No screen, no sounds, no anything. Nothing I do has any effect, not booting from F1, not hitting the Thinkvantage  button.
    Now what?
    Moderator note: fixed subject line.

    I agree, the black screen with 3beep error is a very common problem and the only solution is a replacement board. I suggest you read some of the other topics in this forum on the subject, many have good and useful info in them and there is also a lot of misinformation out there too, as well as an abundance of improperly repaired boards, so it's best to educate yourself before looking into repair options.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Black screen nothing works please help me

    Hey man, I'm sure my iphone isn't stuck in screen or something this morning after a night sleep it had the apple logo reboot stuck so I putted it in DFU mode and recovered it in itunes it downloaded the new ios but then it just stopped working, screen is black won't do anything when I put it into pc it won't connect.and any holding home and power button for '' secs then home or power all don't works. WHAT I GOTTA DO?! PLEASE HELP ME

    I'll talk with my dad tomorrow and send it too some repairder.. I'm not going to pay anything for this and I won't let that happen since nothing is my faulth

  • 3gs 32gb - black screen, nothing works..

    I was playng a game on the iphone and then i went on the laptop while the game was still on, so it went on standby. Now i cant turn it on anymore..
    I tried a lot..
    I tried plugging it into my laptop, nothing itunes is not detecting it.
    I plugged it into the wall socket, nothing
    I let somebody call me, nothing
    I put it on quiet, dont feel any vibration
    I tried to hard reset it, nothing even after 1 minute holding the buttons down
    I took out my sim card, nothing
    It had like 80% battery when it stopped and ive been having it charging for about 30 min now, the weird thing is, the iphone is feeling pretty warm, warmer then normal so i just hope it wont explode in my face.
    PS. i did not unlock it or jailbreak it or anything, all is standard.
    anyone have an idea what else there is i can do?

    See if you can force the phone into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    If this doesn't work, you may very well have a hardware failure and your next step would be to make an appointment at an Apple store.

  • Black screen while working

    last few days my mac got a black screen while working once ort twice a day. no idea why. it's only the screen and there is no way to wake him up. but the cpu didn't shut down and it sounds like he is working correctly. any idea? would make me happy!

    Hey enderci,
    Thanks for using Apple Support Communities.
    If you are not getting video, this articl has as section for no video that should help.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573#1
    Have a nice day,
    Mario

  • I have some error with my iphone 5 in black screen nothing shown

    i have some error with my iphone 5 in black screen nothing shown nothing do no restart and when i have restore my iphone it say error 4014????????????

    is this the original iPhone 5, or 5s? If it's the 5s do you have Apple Care still? If so calling Apple iPhone support is where to start, hopefully they can help, if not, setting up an appointment at the Genius Bar at an apple retail store is a good option too, Call the store first though and ask what your options are in terms of warranty and service. If you are having problems with the regular iPhone 5, still call Apple Care or an Apple store and see what they can do.
    good luck!
    K?

  • Satellite T130 -Black screen- HDMI works perfectly

    The problem started as a HDMI-cable was plugged into my running Satellite T130-17E and the screen was closed down. From that point the notebook screen stopped working. When booting the windows start-up logo is on for a couple of seconds and just before the entering the desktop the cursor is visible on the screen. But except from these short moments there is no action on the notebooks screen. When I reinstalled the driver to the graphic card there was some short moments (less than 0,5 sec) when the screen was active.
    I can use the notebook without any problems via HDMI to my TV. And when I adjust the screens brightness (FN+F6/F7) the black screen can get more back-lighted.
    When I turn off the HDMI-output or plugs it out - nothing happens on the notebooks screen.
    Can some of you please try to help me out as I really need my notebook to work normal again. If you can help me sort out this problem I'll be very grateful-
    Kind Regards,
    Jacob Lindberg

    When I use FN+F5 to use LCD only - there is a very short moment when i can see the dekstop on the notebook screen, but then it turns black again.
    When I try to duplicate the output on HDMI and on the notebook screen - the notebook black is very backlighted when compared to the notebook screen when only the HDMI-output is used. When I switch between the different options on FN+F5 there is som very short moments when some the the notebook screen is active - but it is like a millisecond.
    Is there any thing else I can do?
    Message was edited by: Lindberg

  • HELP!!! Black screen, nothing helps

    PLease help. My ibook g4 started having black screen: i can hear the chime but the screen remains black. Sometimes it does turn on, but almost immediately the message asking to restart appears. I have tried all the regular fixes: setting changing, os re-installed etc. Support told me that it is probably hardware issue. What do I do now? Do I go to the store and pay them to fix it? Does anyone know how much? Please help.

    Andosia, did you call Apple?  What did they say?
    I've had a dead iBook G4 since last November-ish.  There are a few suggested fixes, one of which is taking your iBook apart and putting a shim in the case to put pressure on the chip.
    A couple of months ago I put a wood clamp on the left palm rest of my iBook and it booted up without a problem.  I had it running (with the clamp attached) for nearly six hours without a single problem, and during that time I was able to get all my personal information off of it.
    Now, in the past I was quite adamant about not taking apart my iBook when it's the responsibility of Apple to fix this issue, but today I finally broke down and took it apart.  I figured I may as well, it was just a $1100 paperweight as it was.  But as I type this on my wife's MacBook (which we bought to replace her iBook), I have her previously dead iBook up and running with a shim placed on top of the graphics chip.  I'm currently loading Panther from the Restore Disk because I wanted to give it a clean re-install, but it hasn't given me a single problem yet.
    I still very much feel it's Apple's responsibility to fix this problem, but I'm not holding my breath, and at least now I have a working (for how long?) iBook.

  • Tx2000 black screen but work 2nd monitor

    Hi
    i have a HP tx2000 and when i switch on,the screen come black.
    i connected to a 22" monitor and i can use the laptop.
    is funny because the touch screen still work  ,i can se working in my 2nd monitor!!!
    can somebody tell me what to do please?
    i tried Fn+F4 and  doesn't work
    the computer didnt have OS ,i had to install windows from my 2nd monitor
    kind regards 
    Isma

    In win7 there is a shortcut to alter the display (WINKEY+P). Try use this. If not work, maybe a problem with the cable of the notebook display.

  • IPhone 6 black screen but works

    After getting to work, I come to find out that my iPhone 6 has a black screen. Before that time, it worked just fine until I took it out of my pocket later this morning. The phone shows a black screen, but the buttons still work (the mute switch works; every time I mute it the phone vibrates). I tried connecting it to iTunes and it shows the phone. I assume that the screen has been bricked. I previously had a time where my phone was covered in rain water. That also explain why I have been experiencing crashes on my phone which led me to doing a hard restart. I have the choice of taking it back to my carrier as I'm still under warranty or I can try find out and fix this bug myself.
    Any Suggestions?
    Many thanks
    iPhone 6 running the latest iOS

    IIf you did a reset and screen remained black then it's a hardware issue, not a bug. You should return it under warranty if you still can. Any other attemp to fix on your own is probably going to void your warranty. 

  • TS3533 My screen is black and nothing works, what to do?

    I Can not start my computer. The screen is black

    See this Apple note if your system won't turn on, and see this Apple note if your system turns on but you don't have any video.

  • Black screen nothing else

    Here is my problem
    i was listening to music with i tunes and was running the visualization scheme when the computer stopped and i got a screen in four languages saying that i should turn the computer off on the power button and than restart.
    i did that but now the computer does not turn on. I do not get any tone signals the power light is solid. and the screen is blank, i can hear the CD rom running but nothing else. There is a DVD in the drive but the wireless keyboard or mouse is not responding at all.
    any idea what the probelm can be i have the machine for a month only
    Here is the serial number: W860606JU2R
    I-mac 17/1. 83/128VRAM 1GB(1x1)/500GB/S10/WL KYBD/ MSE
    Bluetooth: 0014515A1427

    Welcome to Discussions racb,
    It is possible that one of your RAM (memory) modules has worked loose.
    Intel-based Mac: Startup sequence and error codes, symbols
    Use the ejectors/locking mechanism to dislodge the modules, then reinstall by pushing firmly with thumbs/fingers. Secure in place using the ejector/locking mechanism. When properly installed (fully seated), the top of each module at both ends will not protrude above the level of the plastic guides into which the RAM is inserted.
    Intel-based iMac: Installing and replacing memory (RAM)
    If this does not resolve your problem, try http://www.apple.com/support/mac101/help/2/
    Edit-
    It is extremely rare that original RAM fails and needs to be replaced. Loose RAM is much more common.
    Message was edited by: myhighway

  • Black Screen, computer working

    Hi, I accidentally hit the wrong thing as I was swiping right to turn it off. The screen went black and the computer was still working. I dont know how to fix it! Cheers

    Sorry for not answering sooner, and thx for the reply BDAqua!
    Can't see the faint desktop, it really seams that only the display is off...
    Another think to notice is that when I'm reinstalling the software (mountain lion, always updated, and the problem had started with OS 10.7) or try in find a hardware problem (with the Command + D hardware test, that takes almost 1 h to complete, with my 2tb hd) the display never seems to turn off...
    I really can't figure out, but some time i suspect a HD problem, because of it's noise and since i had problems with it before...
    Thx again!

  • Black screen, Nothing loads

    I have a toshiba satellite l305d. When I turn it on the lights light up and the fan turns on but that's about it. The screen is black, no light, nothing loads, no startup screen or anything. I removed the hardrive and the hardrive is fine. Other than the noise of the fan the computer doesn't make a sound. Any ideas?

    Yes, it sounds like the motherboard.  Luckily, they are inexpensive for your model on eBay.  And the L305/L305D is pretty easy to service.
    Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
    Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Maybe you are looking for

  • How to avoid the split problem when uploading the data from csv file

    Dear Friends,               I have to upload data from the .csv file to my custom table , i have found a problem when uploading the data . i am using the code as below , please suggest me what i have to do in this regard       SPLIT wa_raw_csv  AT ',

  • Remove Mac OSX installation from external disk

    Hello, I installed an extra max osx installation on an external disk. So i can starup from my HD or my ext disk depending on my start up disk choice. Everything works fine. Unfortunately i installed it in a partition with a lot off backup files in it

  • Cant sign into download manager?

    So I am trying to download Illustrator but first, I have to sign into download manager. When I try to sign in, it says "Error communicating with Adobe.com (Error 100) Check your network connection and restart Adobe Download Assistant. I tried everyth

  • How to fetch data into xml file trom sql table.

    Hi, We r now working in oracle 9iAS portal. We have installed xdk along with 9iAS. I would like to know how to and where to run an xsql file,preferably with an example to fetch data from a database table to a xml file.

  • XDB 10.2g Structured Schema

    Hello, I am trying to insert 2 different kinds of instances(with the same root) into 1 xmltype table. the xml schema's are all registered and the object types were created for them. I want to know if oracle xdb is using the object types to manage the