Black Screen on install of Windows 7 32 or 64bit on MBP Late 2008

I have an issue installing Windows 7 32/64bit on my late 2008 MBP from a fresh Lion 10.7.1 install. Boot Camp creates a partition just fine, recognizes the Windows install disc and restarts bongs grey screen then only displays a black screen. No cursor, nothing... but if I hit esc twice the machine restarts. I have tried removing and re-creating the partition, resetting pram and repair permissions.
Any suggestions? Is this a widespread issue?
Thanks in advance.
Processor 2.53 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software Mac OS X Lion 10.7.1 (11B26)

I am having the exact same problem. I have late 2009 MBP with Lion 10.7.1. My harddrive has a partition and everything has been smooth. When I start the installation process, the "mac sound" starts and the screen is grey. It then turns to a black screen with an underscore in the top-left corner, then just remains blank.
We need help!

Similar Messages

Black Screen for Install of Windows 7 on Mac Pro Early 2008

I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I can hear the DVD spinning up and down a few times then that just stops too...
I have tried resetting the PRAM, pulling the power and watch battery inside for a few minutes, I tried the "fix" that is online for the imac problem with the answerfile and got no different resutls with anything, still the same probelm.
I have the OEM ATI Radeon video card 512MB.
* as a side note, I was never able to download the windows support drivers prior to trying the install... I tried and tried for the last two days so this time I "unchekced" that box and just went for the install...
Any help will be greatly appriciated, thank you :-)
Mike

Hey Hatter, I know this is a little old but I've just picked up this thread and I wonder if you can help. I get the same issue as:
JRASupport
Jun 28, 2012 1:56 PM
I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I get that dreaded black screen following partioning of my drive on the Windows 7 install on Mavericks on a Macbook Pro late-2008 (MBP5,1) but I'm at a loss to work out where the solution lies in the thread! ;-(
To date I've spent about 5 days going back and forth trying all sorts of combinations, including the obvious:
- removing bootcamp 5 and reverting to 4
- installing the imac drivers
A HUGE thanks if you can offer any help as I'm at the end of my tether...!
Adam
BTW I'm working off USB with 32 bit Windows 7 ISO

Black screen after installing Boot camp Win7 on iMac 27 late 2009

I've run out of ideas as to how to fix this problem. I have a late 2009 iMac quad i5, Mountain Lion, 12GB RAM, 1TB HD (recently exchanged under extended warranty).
I stopped counting how many times I have tried to get this up and running but I followed a whole bunch of 'how to's' on the net, including the official Appple guide, but I always end up with a black screen. I insytalled it from scratch using both, Apple drivers on CD and SD card and I can confirn that they installed correctly during my last try. That time I first installed Win Vista, then upgraded to Win 7. I took out the install DVD after first restart and left the SD card in its slot (correctly named, as suggested by Apple). the installation finished, the screen went dark for about 5 min, then the computer rebooted, the screen went dark again for another few min and after that the vomputer restarted again but this time all stayed dark and nothing happened for the better part of an hour.
I also restarted from the Win install disk and tried to remove the ATI drivers using command lines, as suggested in one post.
I need to run Win in Bootcamp because some application I use are very demanding so I need Win to run natively. In an earlier attempt I managed to boot Win7 from the Bootcamp partition in Parallels and I installed the Apple Drivers in that environment but it still resulted in a black screen. I also tried to remove the ATI drivers from Drivers directory manually in MacOS mode but the System wouldn't let me edit the Syustem folder at all, not even in Root user mode.
I understand that I'm not the only one with problem and I feel for you, but please refrain from "me too" posts becuase it doesn't really solve my problem. Thank you.

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

HT1492 windows 7 boot camp black screen after install

Hi,
I have installed bootcamp on a 2010 white macbook with os 10.7
Windows 7 was install all the updates for apple and windows where completed. Everything was looking good and running great. This is my work computer and it has run boot camp previously on another macbook with the same specs.
When I restarted the computer to comfirm that all was good with both partitions the mac is running great, but the windows just locks on the black screen, no cursor, no windows starting.
I tried to start with the install disk in but after the black and white instruction screen the computer went back to the black screen.
I deleted the windows partition and tried to re-install but just got the black screen straight away and it will not even load.
When i did this I noticed that Parallels had been install on the computer I tried to start it and the windows 7 is asking for the install disk to be inserted and restarted to fix problems. I insert the disk and tried to restart but nothing happened again.
Any help would be greatly appreciated. As i need to do school reports over the next week!
Thanks LC

Did you create a snapshot of Windows in Parallels to fall back onto if it won't work?
It sounds like to me you didn't pass validation, did you ignore those warning bubbles in the bottom corner?
Take the machine to a local PC/Mac geek and have them find the problem, it's too involved to go into here.

Pavilion dv6-1230us Black Screen after installing Windows 7...Please Help

Hi,
I recently installed Windows 7 and everything was working fine until my computer went into hibernation. Before this, I installed all the drivers and software from the HP website for my computer for Windows 32 bit setup. After my computer went into hibernation, my computer will not start up in normal mode; rather, it starts in safe mode only. When its starts in normal mode, the screen just turns black and nothing happens. The login screen comes up perfectly fine but after I login at startup, the screen just turns black. Please help, I don't know what else to do whether it is a driver or software issue from the software from the HP site.
Thanks,
Daniel

Did you check Apple Support Boot Camp article?
iMac displays a black screen during installation of Windows 7
http://www.apple.com/support/bootcamp/
Installation Guide
Instructions for all features and settings.
Boot Camp FAQGet answers to commonly asked Boot Camp questions.
Windows 7 FAQAnswers to commonly asked Windows 7 questions.

Black Screen after installing Windows 7

Ive had this problem in the past and im aware that you need to install the correct display / bluetooth drivers for windows 7 for the iMac 27" 2.8Ghz i7 4GB ddr3
i have Lion installed and up to date with Bootcamp Assistant 4.0.1
i wanted a fresh windows 7 install and didnt think that i would need to mess around with downloading drivers etc. WHY with the release of Lion and the updated version of Bootcamp Assistant (and it downloads 'windows support software' prior to install) do i get the black screen!!
THIS IS SO ANNOYING as i live in a poor broadband area (2mb max) and each time i install to get this working it take AGES to download 'WINDOWS SUPPORT SOFTWARE' which doesnt address the issue
c'mon Apple your better than this!!

Did you check Apple Support Boot Camp article?
iMac displays a black screen during installation of Windows 7
http://www.apple.com/support/bootcamp/
Installation Guide
Instructions for all features and settings.
Boot Camp FAQGet answers to commonly asked Boot Camp questions.
Windows 7 FAQAnswers to commonly asked Windows 7 questions.

Black screen while installing windows 7 on SL400

Hi
I am installing windows 7 on my laptop SL400. After windows logo i am getting black screen with cursor.
Regards,
Vivek

Did you check Apple Support Boot Camp article?
iMac displays a black screen during installation of Windows 7
http://www.apple.com/support/bootcamp/
Installation Guide
Instructions for all features and settings.
Boot Camp FAQGet answers to commonly asked Boot Camp questions.
Windows 7 FAQAnswers to commonly asked Windows 7 questions.

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

IMac displays a black screen during installation of Windows 7

I tried to install windows 7 on my imac 27" but imac displays a black screen during installation of windows 7.
I also tried to install it as apples instruction of http://support.apple.com/kb/ts3173 but it failed.
Any solution please.. thanks
I have a late 27" imac with OS X 10.85

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

HP C309 G AIO can't install in Windows 7 64bit running under BootCamp

HP C309 G Printer wont install in Windows 7 64bit running under BootCamp on a new iMac
Just bought a new iMac. Installed HP C309 all in one without incident on the Mac side. I am also running Windows 7 on iMac through a program called Bootcamp. When I boot to Windows 7 and try to install the newly downloaded software for windows 7 from the HP site, it begins to load then stops, giving me two error messages. They are both essentially the same except one says software and the other says hardware. The software one says: This computer does not have the necessary USB software support to allow completion of a USB installation. The printer plugs directly into the monitor in one of four usb ports. All the usb ports work on the system when using Windows 7. I have other devices working and plugged into the usb ports while in Windows 7. It is almost like the printer software is unable to find the usb software or hardware. Any ideas

Well, you have a full Window's 7 install so you would really have to go to HP and/or Microsoft to see what is going on. Bootcamp basically is only involved with "booting" and just installs Apple product drivers and such. Just treat the Window's side as if you are using it on a "normal" Window's PC. (As far as problems, crash's, updates, or any other Windows, HP, etc, problems you may have.)
"Installed HP C309 all in one without incident on the Mac side."
So,,, that means the printer "works" (prints) on the Mac or the installer just worked? Make sure the Printer actually prints in the Mac side as you may have a dead USB port on the Printer. It happens.
If your HP works fine (prints) in the Apple environment you know it's not the USB ports on either the printer or the computer.
You said you already downloaded the newer versions, have you tried using the drivers on the install disk and then update them to the newer ones? Also if you haven't yet, make sure the drivers are for the 64bit version, just a thought.
That's about all my brain cells have so good luck.......

Bootcamp 2.1 won't install on Windows 7 64bit

I downloaded the 64bit Bootcamp and tried to install on Windows 7 64bit Retail Edition (RTM) and Bootcamp won't run. I tried compatability mode for Windows Vista 64 bit with and without SP2.
I need sound drivers. Everything else works on my Mac.
HELP

Install RealTek drivers for sound.
Maybe the 2.0.x Boot Camp drivers didn't get installed. You have to have those first.
Also.... 2.1 is OLD as the hills and was only for SP3 really, nothing there to improve on W7 or Vista SP1/2.

Update KB2685811 fails to install on Windows 7 64bit

Update KB2685811 fails to install on Windows 7 64bit FROM WINDOWS 8.1

Hi,
Based on my research, this update package only applies to Windows 7 and Windows server 2008 R2. Windows 8.1 doesn't support this update.
If you need any further assistance, please feel free let us know.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Portege M750 - PCI controller software not installed on Windows 7 64bit

Hi, had an upgraded SSD for my machine so decided to do a fresh install of Windows 7 64bit and now I have and error saying PCI controller software is not installed, tried windows update no luck - any ideas please?
Thanks, Peter

OK cool advice - thanks it is from Intel and is
0x2A44 Chip Number: Mobile 4 Series Chipset
Chip Description: Intel Management Engine Interface
Notes: ftp://ftp.vaio-link.com/PUB/VAIO/ORIGINAL/ME DRIVER INTEL 4.0A _ 4.0.0.1105.ZIP
Downloaded, installed and working - thanks for the quick advice!
Peter

A solution that works for Windows 8.1 on MBP Late 2013

Here is how I could successfully install Windows 8.1 on Mbp Late 2013 running Maverick:
Follow precisely these steps and you will be done in 30 minutes:
1/ Using BootCamp Assistant, create a USB stick and select all three options including Bootcamp updates, etc.
2/ Set your partition size when asked.
3/ IMPORTANT: When reboot, Hold the Option key and Boot again on Maverick (do not boot on the USB stick)
4/ When back on Maverick, run Disk Utility, select Macintoch partition and choose Partition tab.
5/ Select the BOOTCAMP newly created partition (the one at the bottom) and press minus to remove it.
6/ Apply for changes. At this point, BOOTCAMP partition should be gone.
7/ Press + to add a new partition that will likely be called Machintoch HD2 or so.
8/ Rename it to BOOTCAMP
9/ IMPORTANT: Change the partition type to ExFAT.
10/ Apply again for changes.
11/ Reboot your Mac and Press Option again. Select WINDOWS (Orange USB device)
12/ Windows installation process should start and bring you to the partition selection.
13/ Select the BOOTCAMP partition (the one at the bottom) and FORMAT it.
14/ Press Next and get going through Windows 8.1 installation.
15/ IMPORTANT: Each time a reboot occurs, press Option key and select WINDOWS Drive (NOT the ORANGE USB stick)
16/ Finally, Windows 8.1 will get installed and will ask for BOOTCAMP drivers to get installed. Just follow the instructions.
17/ You are done.
P.

Ohhhh, Silly, silly moi. Ok, got it. Now I see "Partition". Thanks! Will try again. Downloading Windows support software as I type.
Thank you.
One more thing - while attempting installation the first time (before I stumbled on this thread) - I looked up YouTube re how to create a USB bootable ISO (which included editing the info.plist file in Boot Camp Assistant).
When I tried installing 8.1 from the ISO, the installation aborted saying "cannot find resources" (something like that) - this occured after the first stage, i.e. while "preparing files to install Windows".
Assuming I get this again (I hope not!), is it because of a corrupted ISO?

Black Screen before installing windows 7. Lets solve once and for all.

I have a late 2008 macbook pro and have been trying to install windows 7 through boot camp for a number of days now. I have read every forum on the internet and have tried every popular solution (i.e. resetting pram, smc, unplugging, changing screen resolution, etc.) and nothing has worked. I know there are many other people with this problem but none of them have solutions. I had windows 7 installed a few months ago but it stopped working and I had to delete it. Just yesterday I reinstalled Snow Leopard and still nothing. I created the partition and tried to install windows but it just goes to the blinking cursor for one second, then a black screen. I have tried everything possible and nothing works.
Please lets try to get this problem solved because out of every single forum on the internet, none of them have solved this problem.

I think after weeks of searching I have finally narrowed it down, based on what I have read, to a disk drive problem. It seems to be something wrong with the EFI or the entire disk drive in general. I am taking it to the apple store tomorrow and I highly doubt they will do anything.

Black Screen on install of Windows 7 32 or 64bit on MBP Late 2008

Similar Messages

Maybe you are looking for