Black screen on Mac Book Pro 17(late 2011)

Mac Book Pro 17 (late 2011), Model A1297, MD311LL/A, 2.4 quad.core i7/2x2 GB/750-5400, Running OSX Maverick 10.9.4.  One day OK, next day a black screen.  Tried soft reboot, nothing.  Computer acts like it is on (keyboard lights up), and white light on front pulses as if in hibernation mode, battery is at 95%. all AC plugs ok.  Nothing external to this computer. Can you help?  Linda, [email protected]

First, I would try:
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
If that does not help then try booting the computer from the Recovery HD. If it still does not work then there is a hardware failure. Please make a Genius Appointment and take it in for service.

Similar Messages

  • Mac book pro 13' late 2011

    Hi,
    My mac book pro 13' late 2011 isn't starting up. It once started shutting down and rebooting by itself after 6 months of purchase but got ok by itself  so I didnt go get it checked ( assumed it was a one off something ). Too bad but it was a problem to be resolved. Now, 20 days back same thing switching on and off started happening automatically and now the computer is not starting at all. When i press the power button it tries to boot ( gives a small kick after 2 seconds of the button press ) but nothing really happens. Could someoone please guide me if there is something that cane be done ? Thanks a lot in advance.

    Try the troubleshooting help here >  Troubleshooting: My computer won't turn on
    When you post for help, please tell us which OS X is installed.
    If you arent' sure, click the Apple menu icon top left in your screen.
    From the drop down menu click About this Mac.

  • A new mac book pro in late 2011

    hey their,
    is it true that apple brings out a new mac book pro in late 2011 ?
    i'm about to buy a macbook pro.
    what you think, sholud i wait?
    Rumor has it should be due to new.
    have anybody more informations about this ?
    thank you very much
    best regards

    thanks for reply
    @ a brody
    i'm not sure what you mean by the above-mentioned...
    i'm looking for the latest...
    @ z snow
    the link shows only a upgrade of the early 2011 books ...
    only a upgrade ? thats it ?
    I was hoping that Apple brings out new book, maybe with ssd only and with new design maybe like the air books...
    i'm still hoping :-)

  • Mac Book Pro i7 late 2011 Running Slow after installing Mountain Lion

    Hi All,
    Is anyone else experiencing the same issues, since I have updated to Mountain Lion last week my mac is now running alot slower than before on startup, closing down and when opening and shutting programs / apps.
    Would it pay me to upgrade to 8GB ram?
    Thanks
    Lee
    Mac Book Pro i7, 2.4 ghz, late 2011, 4gb.

    Hi All,
    Is anyone else experiencing the same issues, since I have updated to Mountain Lion last week my mac is now running alot slower than before on startup, closing down and when opening and shutting programs / apps.
    Would it pay me to upgrade to 8GB ram?
    Thanks
    Lee
    Mac Book Pro i7, 2.4 ghz, late 2011, 4gb.

  • Black screen on Mac book pro at startup

    When turning my MacBook on, I get to the white screen with the gray apply then it loads and turns black and all I can see is my mouse. My keyboard and apple are lite. But it stays on this black screen.

    monica165,
    which model MacBook Pro do you have, and which version of OS X is installed on it?

  • New mac book pro 15" late 2011 and logic pro user 9.1.7 losing sound in logic on reboot and start up any help please ?

    keep losing sound when reopening logic would like to now if this is a lion related problem or logic , setting do not change.
    All ways" save as" and name project and regularly "save".
    this is really getting on my nerves i've swop to mac on advice it's a far more stable platform for audio, daw's and music.
    I tend to use my computers in short 20 to 30 min sessions several times a day.
    i had to revert to my windows computer because as well as learning logic pro and trying to figure out a new operating system it seems apple have adopted microsoft's approach, putting out a operating system and getting the hobbie techs to tell them whats wrong, this is like buying a car or house that you haft to finish building or wait for the contractors to come back to you, in there own sweettime.
    not impressed.

    I have check hardware and everything seems to be ok.
    How?  Did you run the AHT from system DVD #1?
    after that first restart i get a blue screen.
    You updated to OS 10.6.8 and everything else that needs updating?
    If you did not repair permissions and restarted your installations, do the following:
    Disconnect all devices from the computer then do the following:
    Boot up from your Snow Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
    Once this process has been completed restart your computer and repair permissions directly from Disk Utility.
    If Disk Utility is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    ==========
    How large is your HD & how much space do you have left?

  • I need a link to buy online battery for Mac Book Pro 15" late 2008. Can't find this battery in the Apple Store...

    I need a link to buy online battery for Mac Book Pro 15" late 2008. Can't find this battery in the Apple Store...Battery: Model No. A1281 10.8 V 50 Wh.

    The only place that you can get an Apple battery is from Apple.  All of the counterfeiter's will claim that they have an OEM battery for the simple reason so that they can fool you in purchasing from them.
    At least from OWC you know exactly what you will be purchasing and they have a one year warranty.  I have purchased two from them, one for my 2006 MBP and one for my 2010 MBP.
    Ciao.

  • HT4436 I sent an email using my mac book pro and later on I return the mac to the store for good.  Can I still retreive the email I just sent, how? please help!

    I sent an email using my mac book pro and later on I return the mac to the store for good.  Can I still retreive the email I just sent, how? please help!

    Connect the HDD to your MBP.  Open Disk Utility>Erase and drag the HDD icon inrt the Name field.  The format should be Mac OS Extended (Journaled).  Click on the Erase button.
    Then try the clone process again.  You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
    Ciao.

  • Mac Book Pro 13" Early 2011 Samsung SSD PinWheel

    Mac Book Pro 13" Early 2011 Samsung SSD PinWheel
    16GB DDR3 Apple MacBook Approved RAM.
    I upgraded to a 250GB Samsung SSD 840 EVO drive, install was fine using IOS 10.6.8 but using Logic Express PinWheel of death
    would appear loading tunes, taking ages to load with 16GB RAM? and loading tracks from a Firewire Drive which uses less processor.
    I goto Samsung and get the latest Firmware and create an image and burn it to CD and run it from a Command line. The Pin Wheel continues,
    I upgrade to Maverick in an attempt Apple would know about Samsung's top of the range SSD drives? perhaps not. I have even more issues since the upgrade,
    Itunes unresponsive, missing Apps like Ableton Live 8, more loading Pin Wheel issues.

    Try the troubleshooting help here >  Troubleshooting: My computer won't turn on
    When you post for help, please tell us which OS X is installed.
    If you arent' sure, click the Apple menu icon top left in your screen.
    From the drop down menu click About this Mac.

  • I purchased a Mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

    I purchased a mac book pro in oct 2011, I restarted it after updating and it,s stuck on apple symbol, I hit command R while restarting and clicked on disk utility. It says disk can't be repaired, apple wants $249 to tell me what's wrong. Please help!

    What Apple store told you they wanted $249.00 to tell what is wrong?
    If this is a 13" Macbook Pro then that is the cost of the Extended Applecare warranty. As you are outside the 90 days of Free Phone Support then what Apple told you is that to get Phone Support you would either need to pay $45 per phone call or pay $249.00 for the Applecare extended warranty which comes with 3 years Free Phone Support from date of purchase.
    Or you can take it to a Apple Genius Bar and have them look at it for Free.
    Every Mac comes with 1 year warranty and includes only 90 days of phone support. You can buy the extended Applecare warranty anytime within the first year of ownership, IE until the 1 year warranty runs out.
    I suggest you have your computer looked at by either an Apple Authorized Repair Center or Genius Bar and then before the 1 year warranty runs out buying the extended warranty

  • Can i get OS X LION for free if i bought my mac book pro in July 2011?

    i would like to know if i can get OS X LION for free if i bought my mac book pro in July 2011 ? thx

    Apple - OS X Lion - Get up to date.
    If you use an PowerPC apps / Rosetta read here first >  Lion upgrade questions and answers:  Apple Support Communities

  • Why do USB drives plugged into USB hubs make my Mac Book Pro (Retina late 2013) wake from sleep?

    I have 2 x USB hubs, a Logitech USB 2.0 hub and a Broway USB 3.0 hub. Tested both and both seem to be the cause of my late 2013 Mac Book Pro waking from sleep. I ran syslog to find out why (syslog |grep -i "Wake reason") and the reason I got back was "kernel[0] <Notice>: Wake reason: XHC1" - this means nothing to me, but it didn't take too much mucking about to hunt the problem down and figure out it was the USB hub with any USB drive attached. If the drive is attached directly to the computer. No problem, computer sleeps fine.
    This was a problem I encountered (and never solved) with OSX 10.6.8, a 2008 Macbook Pro the same Logitech USB 2.0 hub, but with different drives. I put the problem down to a bug that never got solved in an old system. But I am simply AMAZED after my update to a new MBP and new system that it is still about almost 6 years, a dozen MBP's and 4 systems later.
    The other problem is that not only does the USB drive/ USB hub combo wake the computer it also loses the drive upon sleep and mounts it again upon wake. Then repeats this process every couple of minutes. And it obviously doesn't eject the drives properly because each time I return to the computer after I put it to sleep or let it go to sleep I get a giant list of "Disk Not Ejected Properly" notifications about it. Which I'm guessing could eventually cause some file damage.
    I've tried combinations of different drives, different hubs (a Belkin and a no-name Chinese brand 2.0 hub) and the problem persists. Is there a solve to this problem? I'm surprised to see so little posts on forums about this. Am I just unlucky and got another combination of faulty/problematic hardware, or is this a real problem that exists for everyone? If not I would love to know if people have found winning combos of USB hubs and drives. But if it is, then it HAS to be solved.
    If you have a Macbook Pro, then you are limited to 2 USB outlets, this is obviously a bare minimum and I would say that 95% of people using their laptop computer in the office or at home have a hub, and very likely a USB drive attached to it. I know actual Apple reps don't really pay much attention to the community support posts, but I've got 6 months worth of Applecare left and would like suggestions about how to get Apple's attention about this problem.
    BTW Jettison (a 3rd party app that ejects drives properly before sleep) is not a solve. It is a 3rd party app that tries to fill a hole in a broken system. I don't want to eject my drive upon sleep, I want it to got the **** to sleep.

    Is there a pattern to the time of day or other detail that may be
    traced back to a OS X system cause of this odd phenomenon?
    Are there any copies of system files on any of the attached USB
    external drives? Any libraries, such as iTunes, iPhoto, etc?
    Once the drives are indexed by Spotlight, are their permissions
    ignored by the OS X? Content, if neutral, should not affect the
    wake or sleep cycle; especially if they're ignored by the OS X.
    Could there be a bad cable or other component? If so that would
    be a difficult process of elimination to detect it. Usually replacing
    most suspect components in the USB stream (external to Macs)
    is a rote way to mechanically test that idea; & not 100% sure.
    Does the equipment all have a good ground to the utility or house
    electrical field? An intermittent ground may affect more than sleep.
    Hard to say at this point. Maybe a late-night talk radio guru on
    remote viewing could peer into your situation and sleuth it out?
    Sorry to have run out of ideas, but the process must be electrical
    & mechanical to some extent. - Or perhaps odd software inspired.
    Do you have any phone-home spyware items inside, just jumping
    at the chance to spill your information? Little Snitch may help.
    PS: Perhaps the computer needs to go into Apple & have a genius
    or product specialist at AASP test the unit thoroughly... BlueTooth?
    see:
    https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
    Good luck & happy computing!
    edited 2x

  • Is three fingers drag available in mac book pro 17 late 2008?

    i have mac book pro 17 inch late 2008 model
    i notice that three fingers drag is not avialble in my track bad

    According to this
    http://support.apple.com/kb/HT3857
    the late 2008 models should all support the same gestures.
    charlie

  • Gray screen on Mac Book Pro 2009

    Help I'm having problems with my mac book pro 17" 2009.  I started with the mac behaving unusally cutting off and taking a long time to restart. then it would not restart at all.  I was able to get it to start by resetting the SMC, but after doing that I ended up with a gray screen, athe apple logo, a spinning wheel and a bar at the bottom, I've tries resetting the PRAm, but the same thing happens. also tried starting it by holding down the option key, which took me to disk utility but I'm not sure if I did that cocrrectly.  Any other suggestions.  I have read multilple article on Apple support and other web sites, so links to them aren't much help.

    Sounds like a internal Board issue, Take it in to the nearest Apple Store, They will fix it there.
    http://www.apple.com/retail/
    This might help as well.
    https://support.apple.com/kb/TS2570

  • Frozen screen on mac book pro 2011

    Hi,
    I hope somebody can help me?My Mac Book Pro is stuck on the front screen with the apple and the spinning thing (sorry not very techy)
    I have switched it off and on again a couple of times and no change?
    Not sure what to do?
    Thanks
    Caroline

    Hi Mende1,
    I have just tried step 7 and nothing happened. I switched it on holding down the shift key.
    Do you know of anything else I could try.
    Thanks for the quick response.
    Caroline

Maybe you are looking for

  • Can't send text messages (can only recieve). How do I change Service Center Number

    Hello. As my subject states, i can't seem to send text messages (but i can receive them). I'm told by my carrier that i need to change my service center number (and they provided it). I've been looking all over the phone for this option, and can't se

  • Crystal report 9 error

    Post Author: lala CA Forum: General Hi, I am creating a report and want to view it in Print Preview but I am getting the following error: "Group #1:?-O This group section cannot be printed because its condition field is nonexistent or invalid. Format

  • BPM - Receive Sync/ASync Bridge Problem

    Hi, I am creating a scenario for an inbound Synch request to be serviced by a BPM process. Here is the problem that I am facing while trying to configure the Receive Step - I created a Message Interface defined as Abstract Synchronous. - I created a

  • Reversing a Terminal command in Mavericks

    Hi there. I have recently upgraded my 2008 MBP to Mavericks. I've been having an issue where the computer won't go to sleep when the lid is shut. After researching the issue and trying a number of 'non-invasive' options, I tried one that was to enter

  • Http LOCK method using ms-word

    Hi all, I'm trying to open a .doc file via MS-word that will be downloaded from my server. I provide word with a url that maps to a servlet that should serve the file from a DB, and write it back to the client (MS-word). The thing is that word sends