Black screen on MSI P43-C51, memory incompatible?

Hi!
I've recently bought a new computer. Everything seems to be in good order, except when I start it I get a black screen. Disks are spinning, I hear it boot up and everything, lights seems to be in the proper places, but the screen remains black.
Searching around, users with similar problems usually seems to have memory problems, therefore I'm suspecting that's my case too. I've triple-checked that they are properly inserted.
Specs:
PSU: 400W Corsair
GFX: Sapphire Radeon HD 5830 1GB DDR5
Motherboard: MSI P43-C51
Memory: 2x2GB Kingston 1066 MHz DDR3 CL7
CPU: Intel Core 2 Duo 2.93 MHz
Is the memory incompatible as I suspect, or is there any other answer? Would be thankful if you could tell me. Thank you.

Quote
it's an Intel C2D with 2.93 GHz freq I think
What is the exact model name of that CPU?
Quote
Searching around, users with similar problems usually seems to have memory problems
Your problem could be caused by any (or several) of the following things:
- memory problem (test each stick individually in the first memory slot, test other memory modules)
- PSU problem (PSU defective or power connectors not hooked up properly (24 Pin ATX, 4 or 8 Pin +12V CPU, 6/8 Pin PCI-Express (video card))
- shorting issue (test the board outside the case on a non-conducting surface in barebone configuration)
- defective CPU
- defective video card
- defective motherboard (bent or broken CPU socket pins, defective sub-circuits, defective chipset components, defective voltage regulators etc.)
- CMOS mess (--> >>Clear CMOS Guide<< )

Similar Messages

  • MSI P43-C51 & ram

    okay guys i have 1things preventing me from finishing my 1st  build and that is memory (Ram)
    i have an msi p43-c51 motherboard and im looking to buy 4 gigs of ram 2 sticks of 2g can anyone recommend a good manufacturer of compatible ram 4 this mother board thats not to expensive
    thank you in advanced for all your help

     So far I can say you're looking at average price about $100 for a 2x2GB kit at newegg for PC2 6400 DDR2, any decent brand. Some are more, others less but average $100. One of the very best is Crucial and their lower priced black chip on a green stick is priced good for that brand. That's what I'm getting in DDR3 for my i3 rig I'm building

  • MSI P43-C51 Strange Boot-up !!!

    Hello to all !
    My problem is when I press on the power button, I had strange beep code and boot-up....
    Beep code:  1 long and 2-3 times short..
    Before that beep, the system every time needs to restart 2,3 or 4 times before booting and get beep code... And this is actually my problem !!! ???
    Can someone help with the this ?
    My Spec:
    MB: MSI P43-C51 (2.1 7519)
    CPU: C2Q Q9550 E0
    Mem: Kingston HyperX "Grey" 1600Mhz (2x4gb), and Patriot G "Sector 5" 1333Mhz (2x2gb) Total= 12gb - I set in Bios 1:2 ratio on 1333Mhz (on XMP 1.65 voltage) and 333Mhz FSB
    GPU: ATI Sapphire HD 4670 1gb GDDR3 New Edition
    PSU: Thermaltake Toughpower 700w 80%+ Silver
    Any idea what's wrong here !!??

    I meant to check the socket for bent pins but if it works with your C2D problem seems to be related to cpu. Maybe current bios on your board doesn't fully support it. With the E7500 and one stick of ram installed update to the latest bios: http://www.msi.com/product/mb/P43-C51.html#/?div=BIOS
    For flashing >>use the MSI HQ Forum USB flasher<<

  • MSI P43-C51 hours of anguish, distress and burnt money

    Hi there, I got a P43-C51 motherboard, and I wanted to make those 16GB of DDR3 working... but..
    I have an Intel E5200 Wolfdale cpu, and wanted to have 16GB of memory in order to make smoother my programming stuff and other actions...
    So, I've received the motherboard, took my working CPU and installed it on my new mobo.. inserted some kingston DDR3 1600Mhz RAM, and my ati 4850 graphic card and got what... nothing.. the thing won't boot.
    All fans are working, when I connect the lan cable the mobo lan port blinks like it should, but.. only phase 2 and 3 leds lit.. no response from phase 1.
    Yesterday I've bought a DIMM of 2GB 1333Mhz Corsair memory.. and the same. Today I've bought Transcend 2x1 DIMMs of 1GB DDR3 1333Mhz.. and got the same negative results.
    I've connected the 24 pin PSU connector plus the 4 pin 12v cpu connector. The Motherboard cpu contacts seem to be ok.
    When I connect a speaker to their jumper I got no sound feedback for any error that could be happening.
    Already cleared CMOS, and even took the batery off and on..
    I'm going crazy, what can I do now?

    When changing processor it is important to clear CMOS. Settings are not the same with every processor, of course. You pull power cable out first.
    Some work, but since it seems to be a processor problem, you should also check the seating. You can do that and above at the same time, good opportunity to do so. You have to clean off old grease and apply some new thermal grease. I do do do recommend having motherboard out of the case when seating a processor.
    Off: My work associates did C+ and C++ programming with 15'' screens and Pentium II at 133 MHz. You don't need much!   
    I am not sure to what extent, but head boss Chief I believe did a lot of programming on the fly with a 33 MHz drag-able computer, big as a suit-case, overclockable to 66 MHz if memory doesn't fail me.

  • Black screen when MSI driver is installed (MSI R9 270X 2GB )

    Bought new computer and everything worked fine until couple of days ago ..
    can pull some info ..
        Windows 7 Ultimate x64
        AMD 8350FX 8-core
        ASUS Sabertooth 990FX R2
        MSI R9 270X 2GB GDDR5
        8GB 1866MHz RAM
        120gb SSD Kingston HyperX
    Everything worked fine even with the drivers that are there now but one day the screen started to fluttering and act strangely then windows crashes. I rebooted then when I want to log in or when the login page will show I only got black screen...
    Reboot again ... go into " safe mode " ... screen works with standard VGA ... uninstall the drivers for the MSI card ( msi.com ) ... restart ... everything works .
    However, it goes on the standard VGA but as soon as I install the drivers, I get the same problem ....
    What has happened? 
    Got NO clue right now .. drivers worked before , I haven't updated them since I installed them (3weeks ago) I have not done anything that I can think of ..
    Are grateful for answers!

    I have the same problem. Updated driver to 13.11 beta was running my  MSI 2GB r9 270x for 3 days got it on the 24th and today after a system reboot the windows screen appears to load then goes to black. I started safe mode, uninstalled the ati graphics drivers, rebooted and windows booted fine. Reinstalled the lastest 13.12 driver and rebooted to the black screen again.
    Specs:
    Board: P7P55D Asus
    PSU: Cooler Master Silent Pro M850 @ 850 W output SINGLE 12V channel at 66A
    VCard: R9 270x MSI 2G
    Proccessor: intel i5 750 @ 2.66 GHZ
    Did not overclock the video card or touch the voltages, tried VBIOS updates to fixed the screen flicker and it worked find the flicker dissapeared after the this new black screen problem happened i reverted back to the stock VBIOS the card shipped with(saved it before i updated it) reverting to the stock VBIOS didnt fix the problem only removing the driver fixes the problem, any help would be greatly appreciated.
    Thanks for your time,
                                Empirus

  • MSI P43-C51

    HY! I've reccently brought this P43-C51 witch was equipped with a 2gb ram (Kingmax cl9 1600 mhz) and a intel c2d e8500.Everything was good and nice until a got a kit of ram(kingston hyperx performance Beast - 8GB Kit* (2x4GB) - DDR3 1600MHz CL9 Intel XMP DIMM Specs: DDR3, 1600MHz, CL9, 1.65V, Unbuffered, Spec Sheet PDF
    Profile 1: 1600MHz, 9-9-9, 1.65V)
    I plugged that in an just won't bot.my sistem its continously restarting (turn on 10 sec/turn off 10 sec mode)
    i've alredy updated bios to 5.7 version and still nothing...any advice?how i get this ram to work? (excuse my bad english)
    thank you

    I meant to check the socket for bent pins but if it works with your C2D problem seems to be related to cpu. Maybe current bios on your board doesn't fully support it. With the E7500 and one stick of ram installed update to the latest bios: http://www.msi.com/product/mb/P43-C51.html#/?div=BIOS
    For flashing >>use the MSI HQ Forum USB flasher<<

  • Black screen on msi twin frozr R9 290 oc edition

    hi
    i got 10 days old card sn:075b1403027403...
    Yesterday during gameplay i got black screen. I made cleen install of windows 8.1 and when i install driver(i tried a few version of amd drivers) of card, i got black screen and i cant go in windows(black screen just before login in windows)...
    any idea? or i use waranty??

    >>Posting Guide<<

  • Black screen with MSI 270X R9 Hawk

    Hi,
    I have MSI 270X R9 Hawk and lit yesterday and suddenly your computer when you are loading windos screen stays black, I have not done any upgrade and illustrates this by default.
    S / N: 602 v303-11SB1401008371
    Any solution? A Someone has happened?

    I tested on a PC with Windows 8.1 and still fails.
    The PC is this:
    https://docs.google.com/file/d/0B1_yaqEGCgIUVlVScV81d0dic0k/edit
    The integrated graphics works OK.
    An old PCI graphic works OK
    MSI 270X R9 Hawk starts well and when you start windows fails
    Windows 8.1 safe mode OK.
    I saved the bios of the graph with ATIFlash
    https://drive.google.com/file/d/0B1_yaqEGCgIUcHNBdGR4XzZHNnM/edit?usp=sharing
    I leave a video of windows in safe mode and restarting the computer.
    https://drive.google.com/file/d/0B1_yaqEGCgIUWGdaRWpyV3BiejQ/edit?usp=sharing
    I need help

  • Problem of black screen with MSI gtx570 twin frozr 3

    I have a problem that will seriously hurt me...(gtx 570 twin frozer 3)
    psu:680green
    cpu:1055t oc
    mb:ta 890 fxe
    ram:crosair 4 gb 1600
    my problem just in game with support dx11
    dx9 very well and no problem
    for example:
    crysis 2 dx11
    homefront dx11
    bc 2 dx11
    deus ex dx11
    all game with support directx 11 and Only 5 seconds of the game comes out and starts again after a few seconds without any problems
    Friends please help me to resolve my issue I think.
    I do not know the English language well,sorry
    Thanks to all.

    Try increasing your core voltage using msi afterburner.  My card personally is stable at 0.9750mv and some users are stable at 0.9880mv.  Good luck mate!

  • Re: Black screen after MSI Z97I Gaming ACK BIOS Update

      Great I could help.

    Quote from: ruta.andrea on Today at 21:29:57
    hi, with dimm in slot 2 im receiving the error code 99??????
    edited
    sorry 1 - 3One by one
    What do you get with DIMM1(label them) in slot #2?
    What do you get wit...

  • How do I create a RAID 0 on a P43-C51 mainboard and Windows 7

    I just upgraded my computer with a new MSI P43-C51 mainboard, Intel E8400 Dual Core and Windows 7.  I have two identical Western Digital 250GB SATA drives.  In my previous system, using Windows XP, I had the two drives configured in RAID 0.  I was unable to find the RAID drivers (and still haven't found them) for the RAID configuration so I erased the hard drives and started over new.  I have the system up and running and want to re-install Windows 7 but in RAID 0 format.  How do I do this?
    I have downloaded the RAID drivers: Intel_HECI_MB.zip from the MSI download site but I haven't been able to use the software to create a RAID 0 configuration.
    With my last board and XP, it was straight forward.  The old BIOS itself allowed the creation of a RAID 0 configuration and the board CD included the drivers for XP.  I am wondering if I overlooked something basic and my new board just doesn't support RAID.
    Any advice or help would be appreciated and thank you in advance!

    Thanks, that is what I suspected.  Now I have a good excuse to upgrade the hard drives to SATA II  !

  • Windows 7 Pro - 64bit with P43-C51

    Hello there,
    I am trying to install Windows 7 Pro - 64bit with my P43-C51. But after clicking: "Install" an error-message occurs saying: "A required CD/DVD drive device driver is missing. If you have a driver floppy disk CD, DVD, or USB flash drive please insert it now.". I provided the Drivers of my Board / DVD-Rom and selected them within the setup, but the error always occurs. I disconnected all devices and booted from USB to find out which one is causing the error, but after all, I think it is the mainboard. Anyone has some advices on how to setup Win7Pro 64bit with P43-C51?
    System Specs:
    MSI P43-C51 (Bios V5.7)
    Intel Q8800
    SATA 500GB Drive
    Bluray SH-B0830 Samsung Drive
    Nvidia Geforce 580

    https://forum-en.msi.com/index.php?topic=142701.msg1065170#msg1065170

  • MSI Notebook GX640, black screen with games

    I own for two years MSI Notebook G series GX640 (Intel Core i5-460M, Ati Mobility RadeonHD 5850, 4GB RAM, 500 GB HDD). Recently I had to send it to the manufacturer because of a audiocard malfunction. It was the last call to do it on the warranty. It ended around a week ago (2 years warranty). The service guy filled an information for me (standard procedure). It stated: repair the audioboard and new ventilation installed. It seems they run some tests and updated the BIOS. After that I had some time (around 2 weeks) of cool work on the machine. Until recently... Here is a description of the problem.
    During more demanding programs (games mostly) the PC runes smoothly for some minutes (10, 15, 20 or so) and without warning goes black screen. Sometimes you can still hear the sound from the game other times no. Also if I unplug the power cable and plug it back it sometimes goes to a very uneasy state with stripes on the monitor.
    I tried to fix this by updating the CCC from ATI, also updated the video card drivers, today flashed the BIOS using the MSIHQ USB Bootable Tool and BIOS Helper. I used the 1656_031 archive from MSI. Searched the forum and the web for info and help... but no luck. So I post here with hope for help.
    I suspect this is not an issue of hardware. If I turn off the PC and start it again works fine, I was also able to upload 2GB of video files to YouTube with no problems at all. As long as I run OS (Windows 7 64bit) or programs like text editors, browsers, video editors, audio editors, internet radio etc. It runes fine. But when I start games it just a no go. To give an example: Mass Effect 3, StarCraft II, Saint's Raw The Third, Borderlands.
    My BIOS information; don't know if it will help:
    BIOS version: E1656IMS.10E
    BIOS build:     08/30/2010 15:58:14
    EC version:    1656 EMS1 ver.4.08
    EC build:        06/03/2010

    Quote from: Fuzz Ball on 19-February-13, 10:53:50
    I could assume (since you've started doing stuff to the bios) that you've done this already, but to make sure, have you checked the usage/temperature of your graphics card?
    Actually I didn't do that... till now. For last 4 hours I have been running some games and programs to determine the usage and temperature on the graphics card. Here are the results:
    Temperature in house was 24ᵒC.
    While normal Windows 7 running temp. is around 50ᵒ to 54ᵒC
    Watching video in 720p from hard drive temp. -> 55ᵒ to 56ᵒC
    Games:
    Book of Unwritten Tales (one game that is not going black screen on me), point and click adventure game -> 57ᵒC to 63ᵒC
    Starcraft II -> 73ᵒC and black screen (5 to 7 minutes of play)
    Mass Effect 3 -> 67ᵒC to 72ᵒC goes black screen
    Borderlands -> 72ᵒC to 75ᵒC goes black screen
    The Catalyst Control Center (CCC) from Ati I use is 13.1 the GPU is 625 MHz and the Memory of the GPU is 1000MHz. Fan goes around 30%.
    Looks normal to me, no 90ᵒC.
    Right after I end writing this post and publish it I will try to open the Notebook to at least try find any suspicious things inside. I will probably clean it, but there will be no real hardware intervention. I'm not that good with IT or electronics to try it by myself. So if any just cleaning from dust and a look inside.
    P.S. There is one more test I might try tomorrow, run a game on a TV through HDMI to see if the problem will occur if it will that means it's not the display.
    UPDATE:
    Seems playing games in window mode might eliminate the problem. All above test's were done if full screen.

  • MSI 290X LE Lightning Edition black screen problem

    I recently bought the above graphics card, only to run into problems with black screen, furmark blackscreens when it reaches just over 70c & games that push the card ie Crysis 3 also causes black screen problems, I'm also sometimes getting desktop corruptions, usually after it black screened.
    My PSU is a 850watt EVGA SuperNova G2 so i know it's not that what causing the problem.
    rest of my setup as follows
    3770K @4.2Ghz
    MSI Z77 Mpower
    8GB corsair memory
    ect ect.
    Any idea's as to the cause of the problem?
    edit here what it doing I've uploaded it to youtube.

    First of all remove any oc. Then list specs more detailed: >>Posting Guide<<

  • MSI 990FXA-GD80 black screen

    Hello there
    Specs:
    What I had:
    AMD Phenom II X4 955 Black Edition
    GIGABYTE GA-880GA-UD3H
    XFX Radeon HD 6970 2GB GDDR5
    Corsair Vengeance DDR3 1600MHz 16GB CL9
    Western Digital Caviar® Black 1TB
    2x Western Digital Caviar Green WD10EADS 1TB
    OCZ SSD Vertex 4 Series 2.5" 128GB
    My computer suddenly crashed with a BSOD while surfing the web. When it restarted I got past the usual Gigabyte screen - followed by a black screen telling me "Beginning to update backup BIOS ---- Updating " then it restarted again, going into a loop with the same thing happening again and again.
    So I figured that the motherboard had crashed, so I bought:
    MSI 990FXA-GD80
    Thinking that would solve the problem.
    I rebuild my computer today with the new motherboard, plugged everything and was ready to go-
    The first message I got was telling me that my cpu or my ram was changed, and gave me the option to either 1- enter BIOS or 2- boot with default values.
    I entered BIOS, checked that everything was OK, saved and rebooted... Got past the MSI-screen - followed by a black screen telling me "NTLDR is missing, press CTRL+ALT+DELETE to restart", which I did.
    My comp then rebooted, but this time both my screens stayed black :O
    I have now tried to restart my computer several times, but my screens stay black.
    My monitors are plugged in with DVI and HDMI.
    Solutions I have tried:
    Removing the motherboard battery. and starting without it.
    changing to my old graphic card, ATI Radeon 5830.
    Removing the power for 15 mins.
    Unplugging all the hard drives, except the SSD. (which my OS is installed at).
    I have now also ordered AMD FX-8150 8-Core Processor.

    Quote
    "NTLDR is missing, press CTRL+ALT+DELETE to restart",
    Did you use the ame HDD for boot without re-installing the OSD ?
    This could be a case of having an AHCI mode OS HDD and your current board is still set to IDE ?
    That X4 955 only supports 1066 or 1333 memory.
    Borrow the other PSU. Insert only one RAM module.
    Do a full CMOS clear.
    Retest and do a fresh OS installation and all curent drivers.

Maybe you are looking for

  • Problem with binding of a selectManyCheckbox inside a dataTable

    Hi, first i want to point out that my english is not the best. :) A german version is followed at the end of the english text. I have a class "MyClass" with few attributes like: private long id; private String text; private Set<MyClass2> childs; An a

  • Web Layout different in Reports Builder to running in URL

    When I go to Run Web Layout for a report in the Oracle Reports Builder, the columns are formatted differently to when I run the report from a browser (ie. font is smaller and the columns seem to wrap when they seem to fit nicely when running Web Layo

  • Can you explain me the loading process?

    This is my application: http://gazman.000space.com. If you will try to enter it now, you will see two loading bars one that is build in the application, that loading swf file, and one I made, that loading images that the application will use(I am jus

  • How do I translate multiple Dynamic Filters into EPMAxisOverride formula?

    I'm trying to replicate an entity selection I have made in the member selector screen with multiple filters into a EPMAxisOverride formula but I have not been successful. The output of the original selection (see attached file) maintains the hierarch

  • Service agreement for excess payment in CC&B

    Hi, In CC&B, why does the system create a new SA to hold the customer credit? I'm trying to understand the logic behind this. Why can't the existing SA's be used to hold the credit balance. Thanks