Black Screen on Windows 7 boot - Boot Camp

I am getting a black screen on reboot of Windows. It just started last night during a viewing of a video. The system shut down and started to reboot and went to black screen after the partition was selected from pressing the option key. The system had been working successfully for several months and was not part of an install. The reason for the shutdown was unknown but not an error as the shutdown appeared to be a normal Windows shutdown. The windows partition successfully booted under parallels and successfully shut down. Not I do not seem to be getting an audio alert when the icons appear for selection after pressing the option key.
I have seen several posts on fixing this during installs but not during normal operation. Does anyone have a suggestion other than wiping out the partition and reinstalling the Windows OS?

I was having the same issue. Fixed it by booting into bootcamp via Parallels, and scheduling a chkdsk /f for the next restart.

Similar Messages

Windows 7 Black screen with cursor after boot camp partition

So I realise this is a problem that was plaguing people a few years back. So I'll go from the very start.
I've downloaded a copy of windows 7 professional 64bit from the Microsoft website. My optical/CD drive isn't working, so I've been unable to use it
to install windows. I decided I'd try booting from my USB. So I have the ISO file and formatted my USB and I've downloaded the latest drivers for boot camp assistant on my mac (version 5.0.4) I'm up to date with every update for my mac. Now, I do realise that Apple doesn't recommend using a USB to load windows, but I watched this http://www.youtube.com/watch?v=8z1gqw0ougo and it explained how to get the checkbox up when you're in boot camp so you can run from your USB.
My problem now, is that straight after I have partitioned my hard drive, it goes on to install windows but upon restarting it reaches "the black screen of death" with just the white cursor blinking. I've tried multiple times and keep getting the same result. I've even tried what Apple suggested and only have one USB device plugged in http://support.apple.com/kb/TS4536
The details for my mac are as follows:
Model Name:
iMac
Model Identifier:
iMac10,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
3.06 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
IM101.00CC.B00
SMC Version (system):
1.53f13
Serial Number (system):
W800992A5PE
Hardware UUID:
A108E54E-3C53-5AF8-BFDF-2CF7ED567A74
and it's a late 2009 model.

I have solved this issue now but seem to have encountered another one. I solved the above issue simply by keep on trying time and time again, partitioning the hard drive and trying to install windows 7.
Anyway, I have encountered this error: windows setup could not apply the configuration set. The WINDOWS folder cannot be found.
Please help!

Black Screen trying to run Boot Camp (XP) with 10.6.8 on a macbook pro

running 10.6.8 on a 3 year old macbook pro. boot camp with xp used to work no problem. i played and beat fallout 3 on it. now it gives me a black screen when i boot up. no sound. no flashing cursor. i ran parallels today and it accessed my drive and everything is there. but when i try to boot into boot camp it fails. anyone have any ideas? ive seen all of the advice for people on imacs or running windows 7, etc.
super bummed. want to play skyrim.
thank you!
damian

something similar has been happening to me for a a couple weeks (even before the most recent update, but now is definitely worse) on my 2010 MacBook Air. Firefox freezes upon startup, and then freezes maybe every twenty minutes or so when I'm actively using it, staying frozen for at least a minute or two. it drives me crazy.

"No bootable devices" screen after Windows 7 Boot Camp failure.

As a lifetime Windows user, I thought that it would not be such a bad idea to install Windows 7 via Boot Camp Assistant. The process went smoothly until I reached the 3rd and final section of the procedure titled "Install Windows 7 or Later Version." I adjusted the MacOS and Windows partitions and proceeded to the final reboot. It is then where I was greeted with a Windows 7 screen tht stated something along the lines of "No bootable devices. Insert boot disc and try again." I have tried the Boot Camp Assistant (Same exact steps I used initially) and have yet to defeat the dreaded No Bootable Devices screen. I would really enjoy having Windows on my device so any help would be GREATLY appreciated. Thank you!

Hmm, I had an 8 GB flash drive connected to the compter at all times. When just using the "Install Windows 7 or later version" feature, shouldn't the flash drive be conncected throughout the duration of the procedure? And I may not be using the correct vocabulary but when I was referring to "adjusting the partitions" I meant the section of the procedure where the user selects how much hard disk drive space is granted to each OS. The response is much appreciated!

Dual Screens in Windows 7 (Boot Camp)

Hi,
I recently installed Windows 7 in bootcamp and I would like to use dual screens with my Mac Mini. Windows only recognies one of my monitors (the Mini-Display Port) and cannot find the Mini-DVI monitor. Am I missing a driver or something (I have installed the Windows Drivers off of the OS X CD Already)
Thanks in Advance!
Stephen

mp4 is just a wrapper... doesn't tell, what's inside.
use a tool such as iMediaHUD
http://www.iffmpeg.com/iMediaHUD/
to tell us a lil' more, what that mp4 really is ..

Black screen during windows 7 install on 27inch iMac

My iMac turns to a black screen during windows 7 boot camp install. I can use the install disk on my wifes Macbook Pro so I know that the media is good.

Please re-post in the Boot Camp forum.

Windows 7 boot camp

Hello. I got little problem today with bootcamp.
Few days ago I updated yousemite and bootcamp worked fine after that. Today I used yosemite and remember my partion in bootcamp is getting small and I wanted to give more space for windows. Sure I wasn`t able to just drag more space for bootcamp so I thought it could be ok to do new partion in machintosh disk in windows format as well and I made 3rd disk there as planning to be able to use that disk in windows. After that I continued my suff with os x and later tried to start windows via boot camp as I always do. Mac started reboot and suddenly black screen came and top left there was blinking line ( - ) and nothing happened after 10min.
So I just shut down my mac by pressing the on/off button and started it as os x after that. Went to disk ultility and removed that extra partion what I did earlier and tried to start windows again and same thing happened. When I`m booting my mac and pressing alt while that I`m not able to choose boot camp. I can just choose os x or recovery 10...
I also ran os x repair stuff and tried again but didn`t work. In general I think everything should be like before I did any new partion. But simply cannot choose bootcamp but I`m able to see bootcamp in disk ultility and I can choose restart mac using boot camp when using os x.
Sure I don`t have any back ups, so it`s kind a ankward. Hope I can start use windows/bootcamp without reinstall it.
So in the nutshell when I trying to boot windows when using os x I can choose start as a windows using bootcamp and after that it starts booting. After that black screen appear and I can see only white line in top left in the screen. Nothing really going to happen after that.
And when I`m booting and pressing alt I`m not able to choose bootcamp, just os x or recovery.

here.
ville:~ villehietalahti$ sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0    geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 425910456] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 426320096 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 427589632 -   60807168] Win95 FAT32L
ville:~ villehietalahti$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 80 7c 19 |........?.....|.|
00000020 00 00 00 00 80 00 80 00 ff d7 9f 03 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 e4 f1 41 28 34 42 28 f8 |..........A(4B(.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200

Windows 7/Boot Camp/SSD SATA3 install problems

Hi there,
I just registered to this community having bought a MacBook Pro 17" on Friday. The aim was to immediately upgrade the stock 5400 rpm drive with 120 GB SSD SATA 3 drive. I installed a brand-new Corsair Force Series 3 120gb SSD but that drive was not even recognized by the Install DVD disk utilities. So I gave up on that one. I then tried an OCZ Vertex 3 and that was recognised immediately. I managed to install Snow Leopard no problems. The problem came when I tried to install Windows 7 using Boot Camp. It's important that I can have access to Windows 7 more than OS X at the moment as I am mainly a Windows user. 12 hours later I still hadn't managed to install Windows 7 after numerous attempts. The various problems included Windows 7 unable to format the drive. Also when I did manage to install Windows 7 it never quite completed the install or would freeze on the starting Windows screen. I managed to get into the Windows 7 installation a couple of times but then the whole shebang would freeze when I tried to install the Boot Camp drivers. Upon rebooting I would not be able to boot back into the Windows partition again. I was rapidly losing the will to live. So I gave up on the OCZ SSD drive as well.
This morning as a last resort I installed an older Corsair Force Series 2 SSD 60 GB drive as an experiment. It was recognized immediately by the disk utilities unlike the Series 3 version and I managed to install Snow Leopard and Windows 7 via Boot Camp with zero problems. So it all up and running. Obviously the hard drive is much smaller than I wanted. But it proves one thing and that is that support of popular brands of SSD SATA 3 drives in the MacBook Pro 17" version is flaky to say the least and on the tests I did using two of these drives it was impossible to install Windows 7 using Boot Camp.
If anyone else has experienced similar problems I'll be interested to hear.
Regards
Kraznet

Oh yes, there are two flaky things to contend with here: the Corsair Force 3 120GB has had recall. I also have found the older 120GB didn't work properly on some motherboards and with older BIOS and Intel drivers.
Questions:
This is hopefully not an electronic EDU/MSDN ISO of Windows that you burned wtih Apple Disk Utility?
primary Windows - forget Boot Camp Assistant - just boot from OS X DVD and change the SSD to Windows MBR partition table and FAT and then format in Windows. Me, I would have bought Windows 7 SP1 64-bit System Builder.
From a hardware review reposted to Amazon:
The Corsair Force Series 3 SSDs were announced just a few weeks ago - boasting SandForce SF-2281 controllers and a very aggressive price point. Just days after the first units started shipping, Corsair has issued a recall of the 120GB Force Series 3 SSDs. According to Corsair, the 120GB model is seeing, "a significant percentage of these drive do not operate to specification." What the failure is exactly isn't clear, Corsair is quick to deflect blame from their partners, simply stating that both hardware and firmware need to be fixed.
Buyers of the Force Series 3 SSD in the 120GB capacity can return the drive to Corsair for exchange - retailers are also accepting returns. The 60GB and 240GB models are not affected. For more information on how to exchange a defective drive, visit this thread [...] in the Corsair support forums.
I'm surprised anyone is selling the Force 3 120GB (though it is on Newegg it is not on Amazon since it was pulled)
Apple has had a slew of problems with the new SATA 6G and 2011s.
http://macperformanceguide.com/blog/2011/20110607_2_MBP-ssd-howto.html
http://blog.macsales.com/page/2
the internal SATA port on the 2011 MacBook Pro is 6 gigabit. One reader installed a Crucial C300 and got 362MB/s average read speed for large sequential transfers. We're looking forward to testing the Intel 6Gb/s 510 SSD and OCZ 6Gb/s Vertex 3 which should be even faster.
http://www.barefeats.com/mbpp33.html
some other articles -
Apple Slipstreaming Dual 6GB SATA III Ports into 13/15/17" MacBook Pro — But Don’t Assume it Functions
Apple two SATA III cables 2011 MacBook Pro
04/05/11 - Apple finally working on a fix for the SATA III bug on the 2011 MacBook Pro
29/04/11 - Bug between some Vertex 3 and MacBook Pro.

Windows 7 Boot Camp no longer recognize my wireless mouse and Keyboard?

I have a mid 2011 27in iMac on 10.9.1 and I run Windows 7 via boot camp, sometimes Parallels as well. Today I tried to boot up in to Windows via Boot Camp, but I can not control the cursor or input anything via kayboard. This has happened before and I only got it working again after reinstalling Windows, which I am REALLY trying to avoid
The thing is, when I boot in to Windows, it is definitely responding to the keyboard when I hold F8 to go in to safe mode, but once the desktop loads up, I lose any function of mouse or keyboard. Even when I try to manually add a device using a USB mouse, it is not detecting any wireless device.
Both my Magic Trackpad and Wireless Keyboard work fine in OS X, Windows 7 when in Parallels and works during the start up of boot camp, but not when Windows 7's desktop boots up.
Any help would be greatly appreciated!

Welcome to the Apple Support Communities
You have to download the drivers. To download them, press X key while your Mac is starting to start into Mac OS X, open Boot Camp Assistant and follow the steps to download them. You will have to burn them onto a DVD or USB drive, so you will be able to install the drivers on Windows. Then, it should work fine.
If you can't download them in Boot Camp Assistant, download the drivers from this website > http://www.cafe-encounter.net/p682/download-bootcamp-drivers The links are from Apple and that's safe to download and install

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." Any thoughts, Thank you.

Unable to open windows using boot camp. Get message "The bless tool was unable to set the current boot disk." I am using an Imac , Lion operating system, and Windows 7. It worked a few days ago. Any thoughts, Thank you.

Note that nowhere in the Boot Camp instructions does it tell you to use Disk Utility to format the Windows partition. The Boot Camp Assistant program creates the partition & sets the +partition scheme info+ of the disk as appropriate for the Windows installer but the Windows installer itself is responsible for formatting the new partition with the appropriate +file system scheme+ (NTFS for Windows 7).
If you follow the instructions in the Boot Camp Installation & Setup Guide to the letter you should have no problems installing Windows.

Red Alert 2 on Windows 7 Boot Camp

New MBA 13" 2011.... Installed Windows 7 (Boot Camp) with latest Windows Support tools/drivers from Apple. Install Red Alert 2 the game but get a graphic glitch where the videos and user menu isn't displayed.
Anyone help?

I ran the automatic setup, I did notice that there was an ATI folder there, however I thought the graphics were Intel graphics not ATI on the new MBAs.

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
any
my problem looks like this
http://www.youtube.com/watch?v=PGzgS57THMo
gta 4 steam !

If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
Just follow the steps:
Step 1: Create a text file named ‘commandline.txt’ (without the " ")
Step 2: Put the following statement inside it:
i5 users: -availablevidmem 18.0 (with the -)
i7 users: -availablevidmem 22.0 (with the -)
Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
Step 4: locate the file "GTAIV.exe" (in GTA main folder)
Right click the file and select Properties
Under the shortcut tab, you will see an area that says Target
Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
(remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
It should look something like this:
Make sure to add space between " and -"
I hope This helps, although late cx

Wifi under windows 7 boot camp keeps dying

I have been running windows 7 64 bit under Boot Camp for just under a week, and last night have started to have some pretty serious issues with the built in wifi.
Periodically, without any consistent cause, when I am booted into Windows 7, my internet connection begins to degrade. Not disconnect or anything, just taking on like 60% packet loss or more, pings to both my default gateway (the wifi router) as well as to anything further out on the internet. My ipad, iphone, macbook pro are all fine and able to use the internet at the same time without issue, its only the imac booted into Windows 7. I can reboot with no change, still completely unusable (unable to load even a single web page) for Windows 7. reboot to OSX, no issues. Its not the router, or the ISP, its JUST when I'm in win7 using wifi. I've changed IPs, used a static DNS, measured wifi, etc. I was using this setup for almost a week before the issues started, and I'm assuming its something wrong with Windows7. Fully patched and up to date, both OSX and Win7.
I finally figured out that I can temporarily fix the problem by resetting the driver for the wifi interface under the Network Adaptor troubleshoot wizard in Windows, this buys me between 5 minutes to half an hour before the issue starts up again. Nothing else I've found will fix the issue even temporarily.
I finally ran a 50 ft ethernet cable from the imac to the router and this has for now solved the intermittent issue, but its not sustainable this way as I cannot leave the cords like this. But clearly there seems to be an issue with the wifi driver in windows that boot camp is using.
Can anyone provide some suggestions of what to look for within windows or a way to debug this more directly? I used the BootCamp assistant to burn a DVD of drivers at install time and I believe they were the most recent versions, but not sure how to check further. Device manager reports I am using the Atheros AR938x Wireless adaptor, and this is a mid-2011 27" iMac running Lion.

I'm having the same problem. Wifi loses connection after 5-ish minutes.
Wondering if it's an issue with the 802.11n drivers...? Seems a little more stable on the "g" networks.
This has been happening since the latest OS X update. I have a mid-2010 Macbook Pro 15".

[HELP] Windows 7 Boot Camp Boot Problem?

Hi,
I have a problem when booting windows 7 after installing it using bootcamp.
Here is what i did:
1) Used Boot Camp assistant to "Install Windows 7 or later version" (Last tick box option) - This also partitioned my drive.
2) While Windows 7 was installing it rebooted several times, I held the option key to select the Windows 7 instlltion disk for every reboot.
3) Once Windows 7 had finished installing I installed Boot Camp 5 for Windows 7.
However everytime I restart my Macbook Pro it boots into OSX Mavericks fine, When I go to startup disk there is no option to select the Windows 7 Boot Camp partition.
When I hold the option key while turining on my Macbook Pro I get the option to select the Windows 7 Partition, but when i select it I get a grey folder with a question mark. However when I turn on my Macbook Pro (with the Windows 7 installation disk inserted) holding the option key, when i select the Windows 7 disk it boot the Windows 7 partition fine?
I have installed reFind and tried that but I get an error: http://puu.sh/80FZt.jpg
What can I do to fix this? I want to be able to boot into Windows 7 without having the Windows 7 installation disk in the SuperDrive, and i also want to have the startup disk preferences to display the Windows 7 partition.
Thanks in Advance
Harvinder

Ok, I have done what you have both said (bobthefisherman & turbostar):
1) Deleted Windows 7 partition with BCA
2) Selected all 3 options in BCA, which created a USB install and it also partitioned my HDD
3) I waited for it to reboot and then it came up with a grey fold with a question mark in it
I never intervened with it in any way.
How do i fix this now? Any further suggestions?
Thanks
Harvinder

How can I get Windows 7 Boot Camp to find my Magic Mouse?

Hey!
So I just bought a Magic Mouse and it works flawlessly in OS X.
But when I use Windows 7 Boot Camp I can't find the mouse to add it as a new device. My bluetooth works just fine and I have the Boot Camp 3.3 drivers.
I tried rebooting, turning the mouse off and on, read a bunch of guides on the internet but no one is having issues CONNECTING the mouse, only getting it to work, so my research is proving to be hard.
Can you guys help me?
Thanks!

Hi Maia,
Can you please mention your MAC model (MBA 2011, MBP, iMac?). Which OS X version?. Have you problems pairing other bluetooth devices?
You may want to try the following setps.
1.- First make sure that you have the latest EFI and software updates. Including latest bootcamp bluetooth drivers.
2.- Unpair MM in Mac OSX
3.- Do a Nvram and SMC reset:
http://support.apple.com/kb/ht1379
4.- Restart
5.- Pair your MM under Mac OSX
6.- Boot on Bootcamp assiging bootcamp as a starting partition
7.- Add your device.
Let me know if that worked, there are another tricks you can try but I need additional information.

Black Screen on Windows 7 boot - Boot Camp

Similar Messages

Maybe you are looking for