Black Screen render problem

When I try render it is a black screen then makes a sheep noise PLEASE HELP I'm using a macbook air

The sound you are hearing, is the sheep having too much grass.
This is a general render error. If you want more information on what is causing this crash, you should check your render error logs.
You can find where they are stored in the Render Settings --> Log menu.
That being said, it is usually three things that cause this. Two common, one uncommon.
The biggest culprit is a plugin which is rendering badly.
The second, is a codec which is not encoding properly.
The far third, is that your RAM is dumping.
If you want to post those, maybe we can take a look and talk you through it, but without knowing more about what's going on, we can't just tell you what is causing the problem.
Good Luck
-David A Turner

Similar Messages

  • MacBook Pro 2007 black screen nVida problem.

    After upgrading to Mavericks on my 2007 MacBook Pro. My display doesn't work anymore. I have a Black screen but computer is booting all the way to start up screen. I think it's the nVida problem. Any suggestions? I have done all resets and still not good.

    Hey Macbiv!
    Here is an article that will help you troubleshoot this issue:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • N770 TF 2GD5/OC Gaming black screen blinking problem

    Hello there,
    i upgraded my PC 4 days ago with a MSI N770 TF 2GD5/OC Gaming graphic card. I installed the newest graphic drivers. Clean install and without nVidia Experience. My problem is black screen blinking when i am playing or watching. Screen turns to black for 1-5 seconds like monitor lost its signal. It happening when i click to fullscreen button. No matter if its in youtube or windows. It happening every time. It does the same when i am playing. Big lag and then black screen blinking for 10 sec. Sometimes more sometimes less than 10 sec. I used Google and i am not the only one, who have this problem. Some people says, that GPU BIOS flash helped but in MSI website is only one BIOS and i dont know if its newer than mine or not. S/N of my card is 602-V282-380B1404100829 (if it helps) and my current bios is here h t t p ://leteckaposta.cz/186979270 (just click on the GK104.rom in the middle).  I think i tried almost everything. Registry clean, anti malware and spyware, drivers re-install, turn W Aero Off, UAC off and other worthless tips how to fix this issue. I monitored my PC with many temperature software and i am 100% sure, that overheating isnt the problem. So could you please check if the MSI Bios is newer than mine or tell me what to do to fix this irritating problem?
    Thank you very much
    PS: I am not a native speaker and english is my 3rd language tbh, so please excuse any grammar mistakes

    you are using latest vbios version, test the card in another PC

  • Black Screen = Inverter problems and more

    I have a 17" MBP and recently had my display go totally black on me on a plane (which i see has happened to a bunch of other people here)
    Took it in and the repair guy won't send it to apple on my warranty because of an unrelated dent in the corner of the computer, which he says apple will claim accidental damage on.
    The dent occurred 8 months ago, and my display broke down 2 days ago. All apple could offer me was to get a second opinion, and if the dent is far enough away from the inverter, MAYBE they'll repair it.
    Any thoughts on how to proceed here? I'm getting pretty frustrated.
    Thanks.

    Oh, sorry, didn't get that. That monitor was actually called the 22" Cinema, not 21". Apple had a 21" CRT but I think that was called a Studio Display, so I got confused.
    So sometimes it works correctly at 1600 x 1024 under Windows (Bootcamp) and sometimes it doesn't? Is that correct? Those times when it is giving a black screen, have you considered trying to establish a VNC connection to the mini from another computer on the network? You might find that the wrong resolution is being sent to the ACD those times when you get a black screen. Though that doesn't really tell you why it's happening, it's a starting point.

  • Toshiba with black screen, similiar problem?

    Hello forum, hope to hear from someone for tech advice. I have a Toshiba model 32av52r flat screen TV. It worked fine, but we went away for awhile and when we came back it no longer works. I am ok and confident with working on things like this. The TV has a SOLID green light on the bottom front. No picture or menu signs. I live where there are occasional power outages so I believed this may have been a problem. I searched via web and some experts believe the power board may have failed. I order on via ebay and replaced. I still get only a green light on the bottom. I have hooked up to a satellite receiver (I use a video cord and the three cords ((red/white yellow)), but am not sure I have those hooked up right.....but I still would think I would get a 'no signal' display or something. I am hoping for some simple checks I can do....is there a reset button? check for power/ohms at certain points?
    It seems that others have had this, and the solution is inserting USB in to side??? I assume one would would have to download something.....? Thanks

    turn off the tv then unplug the power cable,disconnect all the devices that is connected after that press the power button for about 10 sec.
    plug in the power cord then turn on tv.if still no display,try to press the menu button,if menu button is not showing it is a possible lcd screen failure or system board

  • Ipad black Screen display problem?

    Having a problem today. My iPad fell off my desk (with its case on) and when I picked it up & tried to unlock it i was completely black. I connected it to itunes and did a reset but it's still black it actually talks now and any kind of display or the apple logo appears very briefly (like a second or less) but disappears ?

    You could always try the general steps of restarting, resetting, and then trying to restore but Im thinking that this is most likely a hardware issue so you'd be better off visiting an Apple Store first to see what a Genius rep thinks it could be.
    You can make appointments here: http://www.apple.com/retail/

  • Black screen - Touchsmart problem

    I have one Touchsmart 310-1120la the screen remains black powered up, but I hear as booted normally,my operating system is windows 8.
    I need a quick solution, thanks.

    Hi Luiszam, sorry to hear that the screen is blank on your computer after boot up. I have done some research and I have found a document that troubleshoots this issue specifically. Please click on the link that I have provided to get to the document.     http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02217843&lc=en&product=5053522&tmp...
    If this does NOT resolve the issue, please feel free to write back for additional instructions.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Black screen - Leopard problem?

    I woke up this morning to discover that the backlight on my iMac G4 (USB 2.0) running Leopard wouldn't come on. I figured it was just a random hardware failure, probably of the inverter board, but then a friend with the same model iMac called me to say her system did the exact same thing today as well. It's probably just coincidence, but Leopard is known to have some graphics driver problems caused by the latest updates. I'm wondering if a lot of other iMac G4 owners have seen the same failure recently since upgrading to 10.5.2 and Leopard Graphics Update 1.0.

    Does anything come on?
    Have you ever changed the PRAM battery?
    I would check it first. When mine went, I had no response from my Mac at all; just a light on my power button; absolutely no boot at all.
    Check out things in Texas Mac Man's Battery, PRAM, PMU tutorial on the subject. His tutorial is a little dated (don't believe it even mentions G5's) but the info in it, except SMU not being included, still applies.Cheers! DALE

  • MSI GX623 black screen, Afterburner and that old story

    Hello. So maybe someone will know the cure for my problem. I have an MSI GX623 gaming laptop, i have it for like 3 years, i dont remember. So when i bought it I started playing games with it (because it's a GAMING laptop :D). After some time I've started to have black screen/crash problems. So because I had warranty, I gave the laptop for repairs. As I remember, they've changed GPU and cooling system. I took it back from them, hoped that the problem was in the past, but that same day I played GTA 4 and there it is again. All this was like 2 years ago. Until this day I used MSI afterburner and it helped, but sometimes the problem used to show up again, so I used to leave pc on sleep mode and it helped. Right now, I'm using a cooling pad, the afterburner for some time, like half a year. It was like a month until yesterday it all started again. Everything was fine, i turned my laptop, open LoL to play, started the match and bammm, black screen. I thought, ok, not the first time, lets just restart the laptop, open afterburner and it will be ok. Not so fast, as much as I wanted it to be ok, all day I couldn't play anything, not nba 2k14 not lol (these are the 2 games I played for like half year). Well all day I had to watch Sopranos and Prison break, no lol or nba :/ I left it on sleep mode overnight and today it's good as new, played lol, nba, it's all cool, but after some time ( the laptop wasn't shuted down for no time), a short, like few hour brake  without games, wanted to play lol and there it is again. I don't know what's wrong, the temperatures are fine, more like fine, yesterday i cleaned the inside of the laptop from dust. Everything is perfect, but it's still there. I've updated afterburner, but no help. Maybe there is some new solutions to this problem without afterburner? Thank you BTW, I use windows 7, but these days it's like xp, everyone uses them D: thx for the help )

    Quote from: Mark on 11-January-11, 05:54:26
    Could be heat related. Do you know what temperature your CPU and GPU are running?
    Just to be sure on the driver front, uninstall your current graphics card drivers, run >>Driver Sweeper<< to clear any driver traces, reboot and then install the ones from the MSI website: http://eu.msi.com/index.php?func=nbdriver&maincat_no=135&prod_no=1702

  • Problems with kernel26 2.6.36.1-3, black screen on startup

    EDIT I find the problem, it is no the xorg server or intel driver but the kernel! I modified the title of this topic and i ask the moderators if it is possible to move this thread to the right section! thanks
    Hi,
    this night i have updated through pacman the xorg-server and the intel driver but now the system is not able to start.
    In particular the package are:
    xf86-video-intel    2.13.0-4
    xorg-server 1.9.2-2
    but the system was able to start in fallback mode, so i decided to downgrade the driver intel with the 2.12.0-3 version...Now the system won't start. I also tried to downgrade the xorg-server to the previous version but the situation doesn t change..
    How can I find out the problem?
    Thanks.
    Last edited by *blasco* (2010-11-26 13:47:16)

    Thanx for the reply..i've updated other packages but unfortunatly i don't remember the names, there is a method to find out the last updated packages?
    I take a look at xorg log file but there is only one old error for the synaptic touchpad (always had).
    in the dmesg i don t see anything strange. When i start the system i see a completely black screen.
    for completeness i try to post the logs file:
    Xorg LOG
    [ 17.656]
    X.Org X Server 1.9.2
    Release Date: 2010-10-30
    [ 17.673] X Protocol Version 11, Revision 0
    [ 17.673] Build Operating System: Linux 2.6.35-ARCH i686
    [ 17.673] Current Operating System: Linux arch 2.6.36-ARCH #1 SMP PREEMPT Wed Nov 24 06:44:11 UTC 2010 i686
    [ 17.673] Kernel command line: root=/dev/disk/by-uuid/1f9a7a17-4cb5-4ae6-ba70-14018774420e ro vga=792
    [ 17.673] Build Date: 01 November 2010 10:23:07PM
    [ 17.673]
    [ 17.673] Current version of pixman: 0.20.0
    [ 17.674] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 17.674] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 17.674] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 26 13:31:35 2010
    [ 17.706] (==) Using config file: "/etc/X11/xorg.conf"
    [ 17.706] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 17.729] (==) ServerLayout "X.org Configured"
    [ 17.729] (**) |-->Screen "Screen0" (0)
    [ 17.729] (**) | |-->Monitor "Monitor0"
    [ 17.729] (**) | |-->Device "Card0"
    [ 17.729] (**) |-->Input Device "SynapticsTouchpad"
    [ 17.729] (**) |-->Input Device "Keyboard0"
    [ 17.729] (**) Option "DontZap" "off"
    [ 17.729] (**) Option "AIGLX" "true"
    [ 17.729] (**) Option "AllowEmptyInput" "false"
    [ 17.729] (**) Option "AutoAddDevices" "false"
    [ 17.729] (**) Not automatically adding devices
    [ 17.729] (==) Automatically enabling devices
    [ 17.932] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 17.932] Entry deleted from font path.
    [ 17.932] (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 17.932] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 17.932] (**) Extension "Composite" is enabled
    [ 17.932] (==) |-->Input Device "SynapticsTouchpad"
    [ 17.932] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the first mouse device.
    [ 17.932] (II) Loader magic: 0x81f1f80
    [ 17.932] (II) Module ABI versions:
    [ 17.932] X.Org ANSI C Emulation: 0.4
    [ 17.933] X.Org Video Driver: 8.0
    [ 17.933] X.Org XInput driver : 11.0
    [ 17.933] X.Org Server Extension : 4.0
    [ 17.934] (--) PCI:*(0:0:2:0) 8086:3582:1025:003d rev 2, Mem @ 0xb0000000/134217728, 0xf0000000/524288, I/O @ 0x0000e000/8
    [ 17.934] (--) PCI: (0:0:2:1) 8086:3582:1025:003d rev 2, Mem @ 0x50000000/134217728, 0x58000000/524288
    [ 17.935] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 17.935] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 17.935] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 17.935] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 17.935] (II) "record" will be loaded by default.
    [ 17.935] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 17.935] (II) "dri2" will be loaded by default.
    [ 17.935] (II) LoadModule: "glx"
    [ 17.971] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 17.984] (II) Module glx: vendor="X.Org Foundation"
    [ 17.984] compiled for 1.9.2, module version = 1.0.0
    [ 17.984] ABI class: X.Org Server Extension, version 4.0
    [ 17.985] (**) AIGLX enabled
    [ 17.985] (II) Loading extension GLX
    [ 17.985] (II) LoadModule: "extmod"
    [ 17.986] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 17.987] (II) Module extmod: vendor="X.Org Foundation"
    [ 17.987] compiled for 1.9.2, module version = 1.0.0
    [ 17.987] Module class: X.Org Server Extension
    [ 17.987] ABI class: X.Org Server Extension, version 4.0
    [ 17.987] (II) Loading extension MIT-SCREEN-SAVER
    [ 17.988] (II) Loading extension XFree86-VidModeExtension
    [ 17.988] (II) Loading extension XFree86-DGA
    [ 17.988] (II) Loading extension DPMS
    [ 17.988] (II) Loading extension XVideo
    [ 17.988] (II) Loading extension XVideo-MotionCompensation
    [ 17.988] (II) Loading extension X-Resource
    [ 17.988] (II) LoadModule: "dri"
    [ 17.988] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 18.048] (II) Module dri: vendor="X.Org Foundation"
    [ 18.048] compiled for 1.9.2, module version = 1.0.0
    [ 18.048] ABI class: X.Org Server Extension, version 4.0
    [ 18.048] (II) Loading extension XFree86-DRI
    [ 18.048] (II) LoadModule: "dbe"
    [ 18.048] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 18.049] (II) Module dbe: vendor="X.Org Foundation"
    [ 18.049] compiled for 1.9.2, module version = 1.0.0
    [ 18.049] Module class: X.Org Server Extension
    [ 18.049] ABI class: X.Org Server Extension, version 4.0
    [ 18.049] (II) Loading extension DOUBLE-BUFFER
    [ 18.049] (II) LoadModule: "synaptics"
    [ 18.049] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 18.081] (II) Module synaptics: vendor="X.Org Foundation"
    [ 18.081] compiled for 1.9.2, module version = 1.3.0
    [ 18.081] Module class: X.Org XInput Driver
    [ 18.081] ABI class: X.Org XInput driver, version 11.0
    [ 18.081] (II) LoadModule: "record"
    [ 18.081] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 18.082] (II) Module record: vendor="X.Org Foundation"
    [ 18.082] compiled for 1.9.2, module version = 1.13.0
    [ 18.082] Module class: X.Org Server Extension
    [ 18.082] ABI class: X.Org Server Extension, version 4.0
    [ 18.082] (II) Loading extension RECORD
    [ 18.082] (II) LoadModule: "dri2"
    [ 18.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 18.083] (II) Module dri2: vendor="X.Org Foundation"
    [ 18.083] compiled for 1.9.2, module version = 1.2.0
    [ 18.083] ABI class: X.Org Server Extension, version 4.0
    [ 18.083] (II) Loading extension DRI2
    [ 18.083] (II) LoadModule: "intel"
    [ 18.084] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 18.101] (II) Module intel: vendor="X.Org Foundation"
    [ 18.101] compiled for 1.9.0, module version = 2.12.0
    [ 18.102] Module class: X.Org Video Driver
    [ 18.102] ABI class: X.Org Video Driver, version 8.0
    [ 18.102] (II) LoadModule: "synaptics"
    [ 18.102] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 18.102] (II) LoadModule: "kbd"
    [ 18.102] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 18.108] (II) Module kbd: vendor="X.Org Foundation"
    [ 18.109] compiled for 1.9.0, module version = 1.4.0
    [ 18.109] Module class: X.Org XInput Driver
    [ 18.109] ABI class: X.Org XInput driver, version 11.0
    [ 18.109] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    [ 18.110] (++) using VT number 7
    [ 18.117] drmOpenDevice: node name is /dev/dri/card0
    [ 18.117] drmOpenDevice: open result is 9, (OK)
    [ 18.118] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 18.118] drmOpenDevice: node name is /dev/dri/card0
    [ 18.118] drmOpenDevice: open result is 9, (OK)
    [ 18.118] drmOpenByBusid: drmOpenMinor returns 9
    [ 18.118] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 18.118] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 18.118] (==) intel(0): RGB weight 888
    [ 18.118] (==) intel(0): Default visual is TrueColor
    [ 18.118] (**) intel(0): Option "Tiling" "false"
    [ 18.118] (II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
    [ 18.118] (--) intel(0): Chipset: "852GM/855GM"
    [ 18.118] (==) intel(0): video overlay key set to 0x101fe
    [ 18.283] (II) intel(0): Output LVDS1 using monitor section Monitor0
    [ 18.283] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 18.306] (II) intel(0): Output VGA1 has no monitor section
    [ 18.333] (II) intel(0): Output DVI1 has no monitor section
    [ 18.439] (II) intel(0): EDID for output LVDS1
    [ 18.439] (II) intel(0): Manufacturer: LGP Model: 657 Serial#: 0
    [ 18.439] (II) intel(0): Year: 1990 Week: 0
    [ 18.439] (II) intel(0): EDID Version: 1.3
    [ 18.439] (II) intel(0): Digital Display Input
    [ 18.439] (II) intel(0): Max Image Size [cm]: horiz.: 30 vert.: 22
    [ 18.439] (II) intel(0): Gamma: 2.20
    [ 18.439] (II) intel(0): No DPMS capabilities specified
    [ 18.439] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 18.439] (II) intel(0): First detailed timing is preferred mode
    [ 18.439] (II) intel(0): redX: 0.587 redY: 0.343 greenX: 0.320 greenY: 0.529
    [ 18.439] (II) intel(0): blueX: 0.158 blueY: 0.140 whiteX: 0.312 whiteY: 0.328
    [ 18.439] (II) intel(0): Manufacturer's mask: 0
    [ 18.439] (II) intel(0): Supported detailed timing:
    [ 18.439] (II) intel(0): clock: 65.0 MHz Image Size: 304 x 228 mm
    [ 18.439] (II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1696 h_blank_end 1344 h_border: 0
    [ 18.439] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
    [ 18.439] (II) intel(0): Unknown vendor-specific block 0
    [ 18.439] (II) intel(0): Unknown vendor-specific block 0
    [ 18.439] (II) intel(0): EDID (in hex):
    [ 18.440] (II) intel(0): 00ffffffffffff0030f0570600000000
    [ 18.440] (II) intel(0): 00000103801e16780a72b09657528728
    [ 18.440] (II) intel(0): 23505400000001010101010101010101
    [ 18.440] (II) intel(0): 01010101010164190040410026301888
    [ 18.440] (II) intel(0): 362030e4100000180000000000000000
    [ 18.440] (II) intel(0): 0000000000000000000000000000004c
    [ 18.440] (II) intel(0): 475068696c6970734c43440a00000000
    [ 18.440] (II) intel(0): 004c503135305830382d413300000006
    [ 18.440] (II) intel(0): EDID vendor "LGP", prod id 1623
    [ 18.451] (II) intel(0): Not using mode "1024x768" (vrefresh out of range)
    [ 18.451] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 18.451] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
    [ 18.451] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 18.451] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 18.451] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 18.451] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 18.451] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 18.451] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 18.452] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 18.452] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 18.452] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 18.452] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 18.452] (II) intel(0): Printing probed modes for output LVDS1
    [ 18.452] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 18.452] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 18.489] (II) intel(0): EDID for output VGA1
    [ 18.516] (II) intel(0): EDID for output DVI1
    [ 18.516] (II) intel(0): Output LVDS1 connected
    [ 18.516] (II) intel(0): Output VGA1 disconnected
    [ 18.516] (II) intel(0): Output DVI1 disconnected
    [ 18.516] (II) intel(0): Using exact sizes for initial modes
    [ 18.516] (II) intel(0): Output LVDS1 using initial mode 800x600
    [ 18.516] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 18.516] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
    [ 18.516] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
    [ 18.517] (**) intel(0): Display dimensions: (300, 220) mm
    [ 18.517] (**) intel(0): DPI set to (67, 69)
    [ 18.517] (II) Loading sub module "fb"
    [ 18.517] (II) LoadModule: "fb"
    [ 18.517] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 18.525] (II) Module fb: vendor="X.Org Foundation"
    [ 18.526] compiled for 1.9.2, module version = 1.0.0
    [ 18.526] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 18.526] (==) Depth 24 pixmap format is 32 bpp
    [ 18.526] (II) intel(0): [DRI2] Setup complete
    [ 18.526] (II) intel(0): [DRI2] DRI driver: i915
    [ 18.526] (**) intel(0): Tiling disabled
    [ 18.526] (**) intel(0): SwapBuffers wait enabled
    [ 18.526] (==) intel(0): VideoRam: 131072 KB
    [ 18.526] (II) intel(0): Allocated new frame buffer 832x600 stride 3328, untiled
    [ 18.550] (II) UXA(0): Driver registered support for the following operations:
    [ 18.550] (II) solid
    [ 18.550] (II) copy
    [ 18.550] (II) composite (RENDER acceleration)
    [ 18.550] (II) put_image
    [ 18.550] (II) get_image
    [ 18.550] (==) intel(0): Backing store disabled
    [ 18.550] (==) intel(0): Silken mouse enabled
    [ 18.555] (II) intel(0): Initializing HW Cursor
    [ 19.089] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 19.091] (==) intel(0): DPMS enabled
    [ 19.091] (==) intel(0): Intel XvMC decoder disabled
    [ 19.091] (II) intel(0): Set up overlay video
    [ 19.091] (II) intel(0): direct rendering: DRI2 Enabled
    [ 19.091] (--) RandR disabled
    [ 19.091] (II) Initializing built-in extension Generic Event Extension
    [ 19.091] (II) Initializing built-in extension SHAPE
    [ 19.091] (II) Initializing built-in extension MIT-SHM
    [ 19.091] (II) Initializing built-in extension XInputExtension
    [ 19.091] (II) Initializing built-in extension XTEST
    [ 19.091] (II) Initializing built-in extension BIG-REQUESTS
    [ 19.091] (II) Initializing built-in extension SYNC
    [ 19.091] (II) Initializing built-in extension XKEYBOARD
    [ 19.091] (II) Initializing built-in extension XC-MISC
    [ 19.091] (II) Initializing built-in extension SECURITY
    [ 19.091] (II) Initializing built-in extension XINERAMA
    [ 19.092] (II) Initializing built-in extension XFIXES
    [ 19.092] (II) Initializing built-in extension RENDER
    [ 19.092] (II) Initializing built-in extension RANDR
    [ 19.092] (II) Initializing built-in extension COMPOSITE
    [ 19.092] (II) Initializing built-in extension DAMAGE
    [ 19.311] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 19.311] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 19.311] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 19.311] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 19.312] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 19.312] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 19.312] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 19.313] (II) intel(0): Setting screen physical size to 211 x 158
    [ 20.086] (II) Synaptics touchpad driver version 1.3.0
    [ 20.086] (--) SynapticsTouchpad auto-dev sets device to /dev/input/event8
    [ 20.086] (**) Option "Device" "/dev/input/event8"
    [ 20.086] (--) SynapticsTouchpad: x-axis range 0 - 1023
    [ 20.086] (--) SynapticsTouchpad: y-axis range 0 - 767
    [ 20.086] (--) SynapticsTouchpad: pressure range 0 - 127
    [ 20.086] (--) SynapticsTouchpad: buttons: left right middle
    [ 20.086] (**) Option "SHMConfig" "true"
    [ 20.086] (--) SynapticsTouchpad: invalid finger width range. defaulting to 0 - 16
    [ 20.086] (**) Option "VertEdgeScroll" "true"
    [ 20.087] (**) Option "HorizEdgeScroll" "true"
    [ 20.087] (--) SynapticsTouchpad: touchpad found
    [ 20.087] (**) Option "SendCoreEvents"
    [ 20.087] (**) SynapticsTouchpad: always reports core events
    [ 20.087] (II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
    [ 20.087] (**) SynapticsTouchpad: (accel) MinSpeed is now constant deceleration 2.5
    [ 20.087] (**) SynapticsTouchpad: MaxSpeed is now 1.75
    [ 20.087] (**) SynapticsTouchpad: AccelFactor is now 0.156
    [ 20.087] (**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
    [ 20.087] (**) SynapticsTouchpad: (accel) acceleration profile 1
    [ 20.087] (**) SynapticsTouchpad: (accel) acceleration factor: 2.000
    [ 20.087] (**) SynapticsTouchpad: (accel) acceleration threshold: 4
    [ 20.088] (--) SynapticsTouchpad: touchpad found
    [ 20.088] (**) Option "CoreKeyboard"
    [ 20.088] (**) Keyboard0: always reports core events
    [ 20.088] (**) Option "Protocol" "standard"
    [ 20.088] (**) Keyboard0: Protocol: standard
    [ 20.088] (**) Option "XkbRules" "xorg"
    [ 20.088] (**) Keyboard0: XkbRules: "xorg"
    [ 20.088] (**) Option "XkbModel" "pc105"
    [ 20.088] (**) Keyboard0: XkbModel: "pc105"
    [ 20.088] (**) Option "XkbLayout" "it"
    [ 20.088] (**) Keyboard0: XkbLayout: "it"
    [ 20.088] (**) Option "CustomKeycodes" "off"
    [ 20.088] (**) Keyboard0: CustomKeycodes disabled
    [ 20.088] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    [ 20.160] (II) Synaptics touchpad driver version 1.3.0
    [ 20.161] (EE) SynapticsTouchpad no synaptics event device found
    [ 20.161] (**) Option "Device" "/dev/input/mouse0"
    [ 20.161] (--) SynapticsTouchpad: invalid x-axis range. defaulting to 1615 - 5685
    [ 20.161] (--) SynapticsTouchpad: invalid y-axis range. defaulting to 1729 - 4171
    [ 20.161] (--) SynapticsTouchpad: invalid pressure range. defaulting to 0 - 256
    [ 20.161] (--) SynapticsTouchpad: invalid finger width range. defaulting to 0 - 16
    [ 20.161] (**) Option "SHMConfig" "true"
    [ 20.161] (**) Option "VertEdgeScroll" "true"
    [ 20.161] (**) Option "HorizEdgeScroll" "true"
    [ 20.181] (EE) Query no Synaptics: 6003C8
    [ 20.181] (--) SynapticsTouchpad: no supported touchpad found
    [ 20.181] (EE) SynapticsTouchpad Unable to query/initialize Synaptics hardware.
    [ 20.181] (EE) PreInit failed for input device "SynapticsTouchpad"
    [ 20.181] (II) UnloadModule: "synaptics"
    [ 20.194] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 20.194] (II) AutoAddDevices is off - not adding device.
    [ 20.195] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
    [ 20.195] (II) AutoAddDevices is off - not adding device.
    [ 20.284] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 20.284] (II) AutoAddDevices is off - not adding device.
    [ 20.285] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 20.285] (II) AutoAddDevices is off - not adding device.
    [ 20.285] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
    [ 20.285] (II) AutoAddDevices is off - not adding device.
    [ 20.302] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 20.302] (II) AutoAddDevices is off - not adding device.
    [ 20.303] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event7)
    [ 20.303] (II) AutoAddDevices is off - not adding device.
    [ 20.303] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
    [ 20.303] (II) AutoAddDevices is off - not adding device.
    [ 20.304] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event8)
    [ 20.304] (II) AutoAddDevices is off - not adding device.
    [ 20.304] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 20.304] (II) AutoAddDevices is off - not adding device.
    [ 20.305] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 20.305] (II) AutoAddDevices is off - not adding device.
    [ 154.322] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 160.572] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 160.572] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 161.225] (II) intel(0): EDID vendor "LGP", prod id 1623
    DMESG
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Wed Nov 24 06:44:11 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000004eff0000 (usable)
    BIOS-e820: 000000004eff0000 - 000000004effffc0 (ACPI data)
    BIOS-e820: 000000004effffc0 - 000000004f000000 (ACPI NVS)
    BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
    DMI 2.3 present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x4eff0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-CFFFF write-protect
    D0000-DFFFF uncachable
    E0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask FC0000000 write-back
    1 base 040000000 mask FF8000000 write-back
    2 base 048000000 mask FFC000000 write-back
    3 base 04C000000 mask FFE000000 write-back
    4 base 04E000000 mask FFF000000 write-back
    5 disabled
    6 disabled
    7 disabled
    PAT not supported by CPU.
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009fc00 (usable)
    modified: 000000000009fc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000004eff0000 (usable)
    modified: 000000004eff0000 - 000000004effffc0 (ACPI data)
    modified: 000000004effffc0 - 000000004f000000 (ACPI NVS)
    modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
    modified: 00000000fff80000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 4e817000 - 4efe0000
    Allocated new RAMDISK: 00100000 - 008c8c57
    Move RAMDISK from 000000004e817000 - 000000004efdfc56 to 00100000 - 008c8c56
    ACPI: RSDP 000e6010 00014 (v00 OID_00)
    ACPI: RSDT 4effa5b0 00034 (v01 INSYDE RSDT_000 00000001 _CSI 00010101)
    ACPI: FACP 4efffb00 00074 (v01 COMPAL DCL51_00 00000100 _CSI 00010101)
    ACPI: DSDT 4effaa30 050C5 (v01 ACER TM290 00000006 MSFT 0100000E)
    ACPI: FACS 4effffc0 00040
    ACPI: BOOT 4efffb90 00028 (v01 INSYDE BOOT_000 00000001 _CSI 00010101)
    ACPI: DBGP 4efffbc0 00034 (v01 INSYDE DBGP_000 00000001 _CSI 00010101)
    ACPI: SSDT 4effa5f0 00258 (v01 INSYDE GV3Ref 00002000 INTL 20021002)
    375MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0004eff0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0004eff0
    On node 0 totalpages: 323456
    free_area_init_node: node 0, pgdat c142d5c0, node_mem_map c1598020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3952 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 752 pages used for memmap
    HighMem zone: 95490 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    APIC: disable apic facility
    APIC: switched to apic NOOP
    nr_irqs_gsi: 16
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 4f000000 (gap: 4f000000:b0b80000)
    Booting paravirtualized kernel on bare hardware
    early_res array is doubled to 64 at [16000 - 167ff]
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    PERCPU: Embedded 13 pages/cpu @c2000000 s31488 r0 d21760 u4194304
    pcpu-alloc: s31488 r0 d21760 u4194304 alloc=1*4194304
    pcpu-alloc: [0] 0
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 320928
    Kernel command line: root=/dev/disk/by-uuid/1f9a7a17-4cb5-4ae6-ba70-14018774420e ro 3
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 6471340 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (41 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 000158fe8c] TEXT DATA BSS
    #3 [000009fc00 - 0000100000] BIOS reserved
    #4 [0001590000 - 00015961a0] BRK
    #5 [0000010000 - 0000011000] TRAMPOLINE
    #6 [0000011000 - 0000015000] ACPI WAKEUP
    #7 [0000015000 - 0000016000] PGTABLE
    #8 [0000100000 - 00008c9000] NEW RAMDISK
    #9 [0001597000 - 0001598000] BOOTMEM
    #10 [0001598000 - 0001f78000] BOOTMEM
    #11 [000158fec0 - 000158fec4] BOOTMEM
    #12 [000158ff00 - 000158ffc0] BOOTMEM
    #13 [00015961c0 - 0001596214] BOOTMEM
    #14 [0001f78000 - 0001f7b000] BOOTMEM
    #15 [000158ffc0 - 000158ffe4] BOOTMEM
    #16 [0001f7b000 - 0001f7c800] BOOTMEM
    #17 [0001596240 - 0001596374] BOOTMEM
    #18 [0001596380 - 00015963c0] BOOTMEM
    #19 [00015963c0 - 0001596400] BOOTMEM
    #20 [0001596400 - 0001596440] BOOTMEM
    #21 [0001596440 - 0001596480] BOOTMEM
    #22 [0001596480 - 00015964c0] BOOTMEM
    #23 [00015964c0 - 0001596500] BOOTMEM
    #24 [0001596500 - 0001596540] BOOTMEM
    #25 [0001596540 - 0001596580] BOOTMEM
    #26 [0001596580 - 0001596590] BOOTMEM
    #27 [00015965c0 - 00015965d0] BOOTMEM
    #28 [0001596600 - 0001596641] BOOTMEM
    #29 [0001596680 - 00015966c1] BOOTMEM
    #30 [0002000000 - 000200d000] BOOTMEM
    #31 [0001596700 - 0001596704] BOOTMEM
    #32 [0001596740 - 0001596744] BOOTMEM
    #33 [0001596780 - 0001596784] BOOTMEM
    #34 [00015967c0 - 00015967c4] BOOTMEM
    #35 [0001596800 - 00015968b0] BOOTMEM
    #36 [00015968c0 - 0001596968] BOOTMEM
    #37 [0001f7c800 - 0001f80800] BOOTMEM
    #38 [000200d000 - 000208d000] BOOTMEM
    #39 [0001f80800 - 0001fc0800] BOOTMEM
    #40 [000208d000 - 00026b8eac] BOOTMEM
    Initializing HighMem for node 0 (000377fe:0004eff0)
    Memory: 1262808k/1294272k available (3102k kernel code, 31016k reserved, 1207k data, 428k init, 384968k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1436000 - 0xc14a1000 ( 428 kB)
    .data : 0xc1307a56 - 0xc14357e0 (1207 kB)
    .text : 0xc1000000 - 0xc1307a56 (3102 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Fast TSC calibration using PIT
    Detected 1398.902 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 2798.37 BogoMIPS (lpj=4663006)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    mce: CPU supports 5 MCE banks
    Performance Events:
    no APIC, boot with the "lapic" boot parameter to force-enable it.
    no hardware sampling interrupt available.
    p6 PMU driver.
    ... version: 0
    ... bit width: 32
    ... generic registers: 2
    ... value mask: 00000000ffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 0
    ... event mask: 0000000000000003
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 16k freed
    ACPI: Core revision 20100702
    ACPI: setting ELCR to 0200 (from 0c20)
    weird, boot CPU (#0) not listed by the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    NMI watchdog failed to create perf event on cpu0: ffffffa1
    Brought up 1 CPUs
    Total of 1 processors activated (2798.37 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xe9824, last bus=1
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: ACPI Dock Station Driver: 1 docks/bays found
    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
    pci_root PNP0A03:00: host bridge window [mem 0x50000000-0xfebfffff] (ignored)
    pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb7ffffff pref]
    pci 0000:00:02.0: reg 14: [mem 0xf0000000-0xf007ffff]
    pci 0000:00:02.0: reg 18: [io 0xe000-0xe007]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.1: reg 10: [mem 0x00000000-0x07ffffff pref]
    pci 0000:00:02.1: reg 14: [mem 0x00000000-0x0007ffff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:1d.0: reg 20: [io 0x1200-0x121f]
    pci 0000:00:1d.1: reg 20: [io 0x1600-0x161f]
    pci 0000:00:1d.2: reg 20: [io 0x1700-0x171f]
    pci 0000:00:1d.7: reg 10: [mem 0xf0080000-0xf00803ff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: [io 0x1300-0x133f] claimed by ICH4 GPIO
    pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    pci 0000:00:1f.1: reg 20: [io 0x1100-0x110f]
    pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
    pci 0000:00:1f.3: reg 20: [io 0x1400-0x141f]
    pci 0000:00:1f.5: reg 10: [io 0xe100-0xe1ff]
    pci 0000:00:1f.5: reg 14: [io 0xe200-0xe23f]
    pci 0000:00:1f.5: reg 18: [mem 0xf0080400-0xf00805ff]
    pci 0000:00:1f.5: reg 1c: [mem 0xf0080600-0xf00806ff]
    pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.5: PME# disabled
    pci 0000:00:1f.6: reg 10: [io 0xe300-0xe3ff]
    pci 0000:00:1f.6: reg 14: [io 0xe400-0xe47f]
    pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
    pci 0000:00:1f.6: PME# disabled
    pci 0000:01:00.0: reg 10: [mem 0xe0001800-0xe0001fff]
    pci 0000:01:00.0: reg 14: [io 0xc100-0xc17f]
    pci 0000:01:00.0: supports D2
    pci 0000:01:00.0: PME# supported from D2 D3hot D3cold
    pci 0000:01:00.0: PME# disabled
    pci 0000:01:01.0: reg 10: [io 0xc000-0xc0ff]
    pci 0000:01:01.0: reg 14: [mem 0xe0001000-0xe00010ff]
    pci 0000:01:01.0: supports D1 D2
    pci 0000:01:01.0: PME# supported from D1 D2 D3hot D3cold
    pci 0000:01:01.0: PME# disabled
    pci 0000:01:02.0: reg 10: [mem 0xe0000000-0xe0000fff]
    pci 0000:01:04.0: reg 10: [mem 0x00000000-0x00000fff]
    pci 0000:01:04.0: supports D1 D2
    pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:04.0: PME# disabled
    pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
    pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff]
    pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xafffffff pref]
    pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    pci_bus 0000:02: [bus 02-05] partially hidden behind transparent bridge 0000:01 [bus 01-01]
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5
    ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
    ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11
    ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *11
    ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    reserve RAM buffer: 000000004eff0000 - 000000004fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    ERROR: Unable to locate IOAPIC for GSI 13
    ERROR: Unable to locate IOAPIC for GSI 8
    ERROR: Unable to locate IOAPIC for GSI 1
    ERROR: Unable to locate IOAPIC for GSI 12
    ERROR: Unable to locate IOAPIC for GSI 4
    ERROR: Unable to locate IOAPIC for GSI 7
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [io 0x1000-0x107f] has been reserved
    system 00:01: [io 0x1300-0x133f] has been reserved
    system 00:01: [io 0x0200-0x020f] has been reserved
    system 00:01: [io 0x04d0-0x04d1] has been reserved
    system 00:01: [io 0xfe00] has been reserved
    pci 0000:00:02.1: BAR 0: assigned [mem 0x50000000-0x57ffffff pref]
    pci 0000:00:02.1: BAR 0: set to [mem 0x50000000-0x57ffffff pref] (PCI address [0x50000000-0x57ffffff]
    pci 0000:00:02.1: BAR 1: assigned [mem 0x58000000-0x5807ffff]
    pci 0000:00:02.1: BAR 1: set to [mem 0x58000000-0x5807ffff] (PCI address [0x58000000-0x5807ffff]
    pci 0000:00:1f.1: BAR 5: assigned [mem 0x58080000-0x580803ff]
    pci 0000:00:1f.1: BAR 5: set to [mem 0x58080000-0x580803ff] (PCI address [0x58080000-0x580803ff]
    pci 0000:01:04.0: BAR 15: assigned [mem 0xa0000000-0xa3ffffff pref]
    pci 0000:01:04.0: BAR 16: assigned [mem 0xe4000000-0xe7ffffff]
    pci 0000:01:04.0: BAR 0: assigned [mem 0xe0002000-0xe0002fff]
    pci 0000:01:04.0: BAR 0: set to [mem 0xe0002000-0xe0002fff] (PCI address [0xe0002000-0xe0002fff]
    pci 0000:01:04.0: BAR 13: assigned [io 0xc400-0xc4ff]
    pci 0000:01:04.0: BAR 14: assigned [io 0xc800-0xc8ff]
    pci 0000:01:04.0: CardBus bridge to [bus 02-05]
    pci 0000:01:04.0: bridge window [io 0xc400-0xc4ff]
    pci 0000:01:04.0: bridge window [io 0xc800-0xc8ff]
    pci 0000:01:04.0: bridge window [mem 0xa0000000-0xa3ffffff pref]
    pci 0000:01:04.0: bridge window [mem 0xe4000000-0xe7ffffff]
    pci 0000:00:1e.0: PCI bridge to [bus 01-01]
    pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
    pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff]
    pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xafffffff pref]
    pci 0000:00:1e.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:01:04.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
    pci_bus 0000:01: resource 0 [io 0xc000-0xdfff]
    pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff]
    pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff pref]
    pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
    pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
    pci_bus 0000:02: resource 0 [io 0xc400-0xc4ff]
    pci_bus 0000:02: resource 1 [io 0xc800-0xc8ff]
    pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa3ffffff pref]
    pci_bus 0000:02: resource 3 [mem 0xe4000000-0xe7ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    pci 0000:00:02.0: Boot video device
    PCI: CLS mismatch (16 != 32), using 64 bytes
    Unpacking initramfs...
    Freeing initrd memory: 7972k freed
    Simple Boot Flag at 0x37 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1290775386.519:1): initialized
    highmem bounce pool size: 64 pages
    HugeTLB registered 4 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1730
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    ERST: Table is not found!
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    serial 0000:00:1f.6: PCI INT B disabled
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    rtc_cmos 00:04: setting system clock to 2010-11-26 12:43:07 UTC (1290775387)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 428k freed
    udev[32]: starting version 164
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
    ata1.00: ATA-8: SAMSUNG HM160HC, LQ100-10, max UDMA/100
    ata1.00: 312581808 sectors, multi 16: LBA48
    ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R6112, 1031, max UDMA/33
    ata1.00: configured for UDMA/100
    scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160HC LQ10 PQ: 0 ANSI: 5
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R6112 1031 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    REISERFS (device sda3): found reiserfs format "3.6" with standard journal
    REISERFS (device sda3): using ordered data mode
    REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    REISERFS (device sda3): checking transaction log (sda3)
    REISERFS (device sda3): replayed 6 transactions in 0 seconds
    REISERFS (device sda3): Using r5 hash to sort names
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    udev[587]: starting version 164
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    ACPI: AC Adapter [ACAD] (on-line)
    intel_rng: Firmware space is locked read-only. If you can't or
    intel_rng: don't want to disable this in firmware setup, and if
    intel_rng: you are certain that your system has a functional
    intel_rng: RNG, try using the 'no_fwh_detect' option.
    ACPI: acpi_idle registered with cpuidle
    Marking TSC unstable due to TSC halts in idle
    ACPI: Battery Slot [BAT1] (battery present)
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Switching to clocksource acpi_pm
    [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    acpi device:04: registered as cooling_device1
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input2
    ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
    lp: driver loaded but no devices found
    i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
    ACPI: Sleep Button [SLPB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
    ACPI: Power Button [PWRF]
    Linux agpgart interface v0.103
    iTCO_vendor_support: vendor-support=0
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
    ppdev: user-space parallel port driver
    parport_pc 00:09: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    lp0: using parport0 (interrupt-driven).
    agpgart-intel 0000:00:00.0: Intel 855GM Chipset
    agpgart-intel 0000:00:00.0: detected 16252K stolen memory
    agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xb0000000
    NET: Registered protocol family 23
    cfg80211: Calling CRDA to update world regulatory domain
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    firewire_ohci 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 10 (level, low) -> IRQ 10
    8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    firewire_ohci: Added fw-ohci device 0000:01:00.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x1
    8139cp 0000:01:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
    8139too: 8139too Fast Ethernet driver 0.9.28
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
    8139too 0000:01:01.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10
    8139too 0000:01:01.0: eth0: RealTek RTL8139 at 0xf8140000, 00:02:3f:bd:a8:54, IRQ 10
    yenta_cardbus 0000:01:04.0: CardBus bridge found [1025:003d]
    yenta_cardbus 0000:01:04.0: Using CSCINT to route CSC interrupts to PCI
    yenta_cardbus 0000:01:04.0: Routing CardBus interrupts to PCI
    yenta_cardbus 0000:01:04.0: TI: mfunc 0x00111c12, devctl 0x46
    found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
    smsc_superio_flat(): fir: 0x230, sir: 0x3f8, dma: 01, irq: 4, mode: 0x0e
    smsc_ircc_present: can't get sir_base of 0x3f8
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
    ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1d.7: debug port 1
    lib80211: common routines for IEEE802.11 drivers
    lib80211_crypt: registered algorithm 'NULL'
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf0080000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    [drm] Initialized drm 1.1.0 20060810
    libipw: 802.11 data/management/control stack, git-1.1.13
    libipw: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001600
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001700
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    yenta_cardbus 0000:01:04.0: ISA IRQ mask 0x0828, PCI irq 10
    yenta_cardbus 0000:01:04.0: Socket status: 30000006
    pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
    yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [io 0xc000-0xdfff]
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: excluding 0xc000-0xc17f 0xc400-0xc4ff 0xc800-0xc8ff
    yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xefffffff]
    pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xefffffff: excluding 0xe0000000-0xe07fffff 0xe4000000-0xe7ffffff
    yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [mem 0xa0000000-0xafffffff pref]
    pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xafffffff: excluding 0xa0000000-0xafffffff
    Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
    Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
    Intel ICH 0000:00:1f.5: setting latency timer to 64
    firewire_core: created device fw0: GUID 00023f3944007387, S400
    ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
    ipw2100: Copyright(c) 2003-2006 Intel Corporation
    ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
    ipw2100 0000:01:02.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10
    ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x230-0x237 0x370-0x37f
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
    pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
    pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
    pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    udev[601]: renamed network interface eth1 to wlan0
    intel8x0_measure_ac97_clock: measured 52661 usecs (2538 samples)
    intel8x0: clocking to 48000
    i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10
    i915 0000:00:02.0: setting latency timer to 64
    [drm] set up 15M of stolen space
    vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [drm] initialized overlay support
    Console: switching to colour frame buffer device 128x48
    fb0: inteldrmfb frame buffer device
    drm: registered panic notifier
    [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    fuse init (API version 7.15)
    Adding 1951860k swap on /dev/sda5. Priority:-1 extents:1 across:1951860k
    eth0: link down
    ACPI: EC: GPE storm detected, transactions will use polling mode
    usb 1-3: new high speed USB device using ehci_hcd and address 2
    Initializing USB Mass Storage driver...
    scsi2 : usb-storage 1-3:1.0
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
    sd 2:0:0:0: Attached scsi generic sg2 type 0
    sd 2:0:0:0: [sdb] 3919872 512-byte logical blocks: (2.00 GB/1.86 GiB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    Last edited by *blasco* (2010-11-26 12:08:38)

  • First few moments of the video render as just a black screen - Premiere Elements 9

    Hello,
    I'm putting together a short, 8-second demo clip of a particular moment of my project in Premiere Elements 9. The section involves two clips which were taken seperately, but are cut in half with the crop function so that they both play on the screen at once. There are also some position and brightness adjustments of one of the clips to ensure they match up.
    However, I have begun seeing strange behaviour when I attempt to render the clip and as so far I have not been able to get a usable copy. When rendered as a .wmv, one of the two clips is inexplicably cropped from the bottom up to about a quarter of the height of the scene, despite not being so in the editor. Furthermore, when rendered as an MPEG, the format I would prefer the file to be in, although I do not get the first problem I get an issue where the first 20-23 frames of the video refuse to play in an external video player. I tried both windows media player and VLC. Instead, the section of the video appears as either a black screen, a black screen with a white line on it, or, if the video timeline is scrolled back to the start, the last frame viewed. The music clip which accompanies the video however still plays during this section, and the error is not seen at all in the editor. Oddly, if one of the rendered files is imported back into Premiere Elements 9, and played within the error, the 20-or-so frames will indeed play. It seems it is only the Premiere Elements editor that can play these frames.
    I'm utterly at a loss here. I don't mind too much not being able to export as .wmv, as it is not my first choice, but if anyone could help me with the MPEG rendering I would be very grateful.
    The source files are AVCHD (.mts) files, at a resolution of 1440x1080. There is only one "clip change" at the point where the video becomes viewable again, but this is merely where I have split the same clip to perform a brightness change, as I have many times in the video elsewhere.
    Thank you for any help,
    Black.

    Here's a screencap of my interface, although I blurred out the video preview section (it doesn't contain anything relevant anyway).
    I would like to avoid posting a copy of the video if I can help it - I doubt my actors would be too pleased with me posting them around the internet.
    As for the project settings, when I first imported the clips Elements informed me that my project preset was incorrect for the clips and automatically picked one to fit them, so I'm sure that that's all set up fine. All the footage is from the same camcorder, except for a splash screen image, of the correct resolution, which flashes up at the end.
    I have used assets of the same format previously and with no isses.

  • Problem with X -config (freeze + black screen)

    Hi, everyone. I'm a newbie in linux, so dont punch me .
    I was following the beginners guide & after X -config /root/xorg.conf.new got freeze + blackscreen (alt + ctrl + bckspc or alt + Fn dont works).
    I have created /X11/xorg.conf & can start X server, but X -config /root/xorg.conf.new or /etc/X11/xorg.conf gives black screen (with signal).
    My VGA is HD3850.
    Any ideas how i can fix it?
    Here is my xorg.conf
    Section "ServerFlags"
    Option "AllowEmptyInput" "off"
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Razer" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "InputDevice"
    Identifier "Razer"
    Driver "mouse"
    Option "Name" "Razer Lachesis Optical Mouse"
    Option "CorePointer"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "ExplorerPS/2"
    Option "Buttons" "9"
    Option "Resolution" "1250"
    Option "ZAxisMapping" "4 5"
    Option "ButtonMapping" "1 2 3 6 7 8 9"
    Option "Emulate3Buttons" "true"
    Option "SampleRate" "1000"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "microsoftmult"
    Option "Xkblayout" "us,ru"
    EndSection
    Section "Module"
    Load "glx"
    Load "dri"
    Load "drm"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    HorizSync 31.0 - 81.0
    VertRefresh 56.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "radeonhd"
    VendorName "ATI Technologies Inc"
    BoardName "RV670PRO [Radeon HD 3850]"
    Option "AccelMethod" "exa"
    Option "DRI" "on"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024" "1024x768" "800x600"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "RENDER" "enable"
    Option "DAMAGE" "enable"
    Option "Composite" "enable"
    EndSection
    /var/log/Xorg.0.log contain no errors or warnings (except ACPI & font paths)
    Thx 4 help.
    P.S Can add log if it helps
    P.P.S Its one of my xorg.conf files, also i've used variant 4 xf86-video-ati
    Last edited by InsaneDevice (2010-02-27 06:32:32)

    My english is fine (i read well at least)  .
    At first message i said
    I have created /X11/xorg.conf & can start X server...
    I =can= start x server --- its mean that startx works fine & i can see 3 windows with clock . And if you mean that i dont want use x -config, then for what all this manipulations with reinstalling was?
    Besides "Xorg -configure" & "x -config /etc/xorg.conf" are different things for me, because one create the basic config, while second test this config. So i thought you mean that i have to create it from scratch without using any commands
    ... Damn.. i just have read english & russian beginner guides. Russian says: "after installing xorg u have to create conf file, using Xorg -configure, then test it with command X -config /root/xorg.conf.new & IF IT WORK - copy to /etc/X11/xorg.conf. I didnt find that in english version .
    Well, thank you for your patient & help . I think, that problem is solved (i think - say me if i wrong)
    But i still want to know, why x -config /etc/xorg.conf give me that black screen + freeze, so if anybody knows - plz, message me.
    Last edited by InsaneDevice (2010-03-01 07:36:42)

  • Motion files render as black screen in FCP

    I have a Motion file I want to put into a FCP sequence. When I drag the file in, the render preview looks fine, but when I actually render it, it comes out as a black screen. This problem extends to exporting the sequence too. If I export from Motion and drag the movie file into Final Cut, it looks fine, but this is extremely tiresome as I'm frequently updating the Motion file. Can someone help?

    Did you have Motion set to output as Animation codec with Millions of Colors+ ?
    You may have inadvertantly included a full screen alpha channel, which would produce this effect.
    Go back to Motion and change the output file to Millions of Colors only (without the +).

  • Black screen problem on A55-S306

    This is going to be a long post because I have done a lot of troubleshooting and have come to the conclusion that the problem I have is system board related. I have two computers that are identical except one is a celeron and the other is a centrino. I have tried swapping all the related parts from one to the other but still have the same problem. The centrino machine has a black screen. The image is there. I can see it with a flashlight. It works fine with a monitor hooked up. In fact I am writing the post on it right now. So my question is this. If it is definitely the system board, can the board be repaired? I can probably find a board on ebay but would like to know first if this one can be repaired. What usually goes wrong on a system board that would render the screen dark. It has to have something to do with sending a signal to the flourescent light bulb. I have tried the cable, the inverter, the bulb and finally the screen. They all work on the celeron machine. Can anybody give me any advice as to what to do. I am trying to get both machines working so they can be donated to a couple of elderly folks where I live. I am elderly too but I am still trying to be viable and useful. Help!!!
    Ray

    Great job on the diagnostics! Typical lack of a backlight is caused by the screen, FL inverter or the cable between the system board and the FL inverter. But if you have eliminated all of those it has to be the system board. One other place to look, depending on the computer, but there is a switch somewhere that lets the computer know that the lid has been lifted. In the old days, it was a small pin that went up and down to control the backlight. The new switches have no moving parts but use a magnet in the lower edge of the LCD screen to turn on and off the backlight. You should be able to find the magnet with a small piece of steel. If the magnet is missing or moved, it could cause the backlight not to work. Check the working computer to find the magnet and compare it to the one that isn't.

  • My iMac 8.1 was slowing down and had permissions problems. I backed everything up, and then re-installed. Now all I get is a black screen. Power+D gives me a hardware error message: HDD-1336. Help!

    My iMac 8.1 (10.6.8 ) was slowing down and had recurrent permissions problems, mostly with Java. I backed everything up, and then re-installed from time machine. Now all I get is a black screen which says I need to reboot. Power+D gives me a hardware error message: 4 MOT/1/40000003: HDD-1336 or HDD-1327. When I reboot from the OSX CD and start disc utilities everything checks out OK. When I reload 10.5.2 from the OSX CD everything seems to work OK and no more permissions problems. But then I loose all my email and safari stuff. Anyone have any ideas short of going back to my old PC?

    DonM. wrote:
    Hi
    Thanks for the help. No point in fooling around with it any more. Will I be able to use it as a monitor if I get a mimi mac?
    Cheers. Don
    No unfortunatley it's too old, you are referring to Target Display Mode which became avialble in 2009, your 2008 needs to have the HD replaced. I'd still do that if everything else is OK or you can simply buy a new MM and display or even a new iMac  or an Apple refurbished iMac to save money.

Maybe you are looking for

  • Change the default way a new file opens

    Hi I'm working on Mac OS 10.7.5 and DW2014.1 One of the most irritating things about up grades is when you discover the nice cosy way you've done things for years gets trampled all over for no apparent benefit- the only solace is that I guess the new

  • Reg : BPC 7.5 NW Docummentation

    Dear all, I am in the process of exploring BPC NW 7.5 version. So i searched for documnets in regard to this in SMP/help.sap ,found few guides..etc. My question is apart from these guides ,do we have likes of TAB Files (Eg: BPC 310/320 ..etc ),for BP

  • .mov files appear as Unix after recovery, adding extension doesn't work

    (Also posted in Quicktime forum) Whilst backing up (with Synchronise X) a drive, I accidentally clicked to allow around 15GB worth of Quicktime files to be deleted, in two folders.  Realising my mistake, I stopped the back up immediately, and recover

  • Using do pdf, my dwg 's upsidedown text is being flipped/reversed

    I am converting a dwg to pdf using dopdf. My upside down text is being reversed in the process. Is this a setting?

  • How to troubleshooting port channel in N7K

     i find N5K http://www.cisco.com/c/en/us/support/docs/switches/nexus-5000-series-switches/116199-technote-stp-00.html i notice distribution switch has root  guard block log does it mean that looping has occured yesterday? i use command below do not h