Black screen right after Windows Logo screen

All of a sudden the computer just powered down. Then I keep trying to boot it back up but it just gets to a black screen and does nothing. I managed to get to Safe Mode like twice, but then when I try to get to safe mode again it gets stuck loading it. What else can I do to save my laptop OR at least save my data?

Hello
It will be interesting to know which notebook model you have. I have had similar problem and I have connected HDD to second notebook as external HDD. on this way I was able to copy all important data.

Similar Messages

Acer XB270HU black screen after windows logo for about 20-30 seconds

Hi all,On a fresh and fully up to date OS (Win 7) with 2x GTX 980 Ti I have an issue where the screen goes black (No Signal) just after windows logo. Im using UEFI SDD boot flow, have secured boot disabled. Im connected with DispayPort 1.1 (not sure if that matters). This issue did not occur after getting to Windows just after the reinstallation of the OS (no drivers, no updates). It started to occur after the OS got fully up 2 date. Any ideas? As Im losing 30 seconds on boot-up with UEFI so it feels like IDE....

I also have the same issue, it only started a few days ago and ive had it for 2 weeks. Sometimes when I start up the computer, it will say no signal and my secondary monitor will turn on and take its place as the primary monitor. A restart will fix this issue, but then my Acer goes black, says no signal, comes back at a resolution of 600:800 and then 1920:1090, and changes again to its native 2560:1440.
Not to mention G-SYNC does not work at all on my monitor. I can't beleive they charge $1,000 for this extremely mediocre at best monitor

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Black Screen after windows logo

Good evening. So i got a bit angry and kinda hit my laptop...then the screen had some green lines on it so i switched it off, after that after switching it back on the screen goes black after the windows logo i am only able to see the cursor. If i use safe mode it works. So i don't know what to do. Thanks in advance guys.

Hi,
At this point, my best guess would be a problem with the HDD. This would be consistent with damage following an impact and with the notebook being able to start in safe mode ( less read/write load ) - it would also explain why the uefi diagnostics throw an error as it needs to access to the HP_TOOLS partition.
When in safe mode, you could try disabling all start-up items and services ( apart from Microsoft services ), then reboot and see if it will load any further - if it does then manage to load the OS, this would tend to confirm that the issue is with the drive and it'll need to be replaced.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

G62 b05sd screen goes black after windows logo

Hello,
My laptop has been turning of at random lately and now the screen turns black after the windows logo appears, though the start-up tune can be heared. I've tried connecting it to different external monitors yet it doesn't work. I've been able to start-up in safe mode and tried updating BIOS using both HP support assistant as well as manually. HP sup. ass. also doesn't indicate updating anything. The battery is essantially dead, yet i've used the laptop for a long time using the adapter only.
My next step is to do a windows system recovery, but I want to see if the issue can be resolved differently.
Thnx

Hi @frankkilsdonk ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP G62-b05SD Notebook and issues with freezing on the Windows logo. It is trying to load something . I would look at what is in your startup file in Windows.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. If you installed new software on the Notebook you might want to uninstall it as this could be the issue as well.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Black screen after windows logo problem

Hi people, i have the HP Probook 4530s LH306EA and i have been using it for 3 years without any problems but this week after i did a restart on my laptop i got a black screen after the windows logo.
The problem is whenever i install the AMD Display driver it says that there were some errors during the install and the pc freezes and restarts into a black screen...
AMD Display drivers 13.152-130830A-162882C(18 Oct 2013)
Windows 8.1 64bit
Is there any solution to this or some other drivers?

you wouldn't by chance be attempting to use a Sandforce controller using SSD?
please list your components >>Posting Guide<<!
See my signature below for guidance
--------------------vvvvv--------------------

MSI R9 270x OC edition 4gb - black screen after windows logo

Good afternoon,
I am the proud owner of 2 x MSI R9 270x OC edition 4gb cards, One is working a treat, the other is not.
When I use on of them, I get the boot screen (the one with the option to go into the BIOS), then I get the Windows logo, then nothing but a black screen, output from the card is detected by the monitor (green light at the bottom instead of stand by) but nothing else. the other card works perfect on its own.
They are both detected when I run windows in safe mode.
This also happens if I run crossfire on both cards.
SN/ 602-V303-095B1312011152 (this is the good one)
SN/ 602-V303-095B1312011157 (this is the bad one)
Could this be a BIOS issue?
Main Board: ASUS P8Z77-M PRO
Bios Version:Version:
Video Card: msi R9 270X OC edition 4gb
PSU: XFX750 pro
CPU: i5-2500K CPU @ 3.30GHz
Memory: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
SSD/ HDD: 120GB SSD, 1TB HDD, 150GB HDD
CPU COOLER: Cooler Master Hyper 212 EVO
Operating System: Win 7 Ultimate 64bit

Quote
When I use on of them, I get the boot screen (the one with the option to go into the BIOS), then I get the Windows logo, then nothing but a black screen, output from the card is detected by the monitor (green light at the bottom instead of stand by) but nothing else. the other card works perfect on its own.
you mean when you use one of them only or?
Quote
This also happens if I run crossfire on both cards.
SN/ 602-V303-095B1312011152 (this is the good one)
SN/ 602-V303-095B1312011157 (this is the bad one)
can you save and upload both vbioses and give a link to it?

V570 black screen after windows logo

Laptop worked fine till yesterday evening, after that when I power on the laptop, during startup I get windows repair screen and it's ran for 1 hr and then it restarts laptop by itself, from then on after I power on the laptop after initial windows screen I get black screen. I tried take out battery, press power button 30 secs and start again... Nothing worked yet.
Any idea to resolve the issue. Thanks.

Dear Rocky
Welcome in lenovo community
We recommend to perform the recovery as last option , please let me us know if you are not aware with the recovery steps
Waiting your kindly reply
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

System reboots within seconds after Windows logo

Hey guys. I am trying to help out a buddy of mine. He had just bought new parts last nite from NewEgg. He has not got the system to work at all out of the box. He says everytime it reaches the Windows logo wheither it tries to boot to safemode or regular mode, it will reboot on him. I am at wits end trying to figure this out. He has tried all possible settings in the bios. He cant even boot of cd either but booting off a floppy seemed to work. Odd thing is even with no other drives connected with just cdrom connected, it still attempted to boot to windows and reboots everytime.
I dont have all his details from his specs but here are some details he does have below that I know. Can you help me please? Any ideas be helpful? Is it incompatible cpu or is the power suppply not powerful enough for his system? Also in the bios the temp shows 65 C which seems to be awful high. Dont even know if that is reporting correctly or if thats causing it reboot each time. He didnt see any settings to disable it so doesnt reboot when hits certain temp.
MSI K9N4 Ultra-F Socket AM2 NVIDIA nForce 550 Ultra ATX AMD Motherboard - Retail
AMD Athlon 64 X2 3600+ Brisbane 1.9GHz 2 x 512KB L2 Cache Socket AM2 Processor - OEM
XFX PVT73GUGF3 GeForce 7600GT 256MB 128-bit GDDR3 PCI Express x16 Video Card - Retail
400 Watt power supply
dvdrw
250 GB ide hard drive
80 GB SATA drive(doesnt matter when if this drive is connected, same problem)
floppy drive
PLEASE HELP!!!

Well he still cant get the system to boot correctly. He has got the paste reapplied and got the temp showing little down but I really dont think thats the main problem. Even without that SATA OS previous install, and tried to install brand new hard drive to load XP or Vista, he cant boot off the cd. Wont recognize it, system doesnt hit Windows logo anymore and instead gets the message of PXE media failure, check cable. Thinking he is getting that message just because no OS is installed right now. He then tried to boot off 98 startup disk and load XP, not even sure if thats possible. When it was running and running and running, took like over an hour to complete the format and started to load setup files but it completely stopped and would not load any further. He already checked the boot device sequence. He has tried floppy first then cdrom and vise versa with hard drive 3rd but still he can not boot off a cd. These are the same cds he is able to boot off any other system such as laptop with no problems.
What in the world can he try next? Hes about to take a sledge hammer to it. Really not even sure of all the bios options but he says he has tried everything. Something cant be configured right. He has AMI Bios and no idea where to even find screen shots of his actual bios he has online of options to try next in bios. Any ideas guys? If you need more information, please ask.

Ms 6777 v1 Video goes out after windows logo screen.

Im pulling my hair out on this
I have an MS-6777
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=437
I have done a REFORMAT and INSTALL.
I have used all the newest dirvers for the bard from nVIDA .com.
I also have used the newest VIDEO drivers from nVIDA com.
At some point, random, I loos my video. I can get video by booting into fafe mode. But it always goes.
Any help on trouble shooting this?

Quote from: Fredrik Åsenius on 02-August-05, 00:56:07
Good evening!
A What parts have you got, except mobo? What is your PSU capable of in max. amperes? There is a list on the PSU with voltages and amperes.
B Are all parts new? A repair install is needed if the mobo is new.
C For how long do things work in SafeMode? Do you have the time to do anything, like installing mobo drivers before installing the graphics drivers? Do not rush updating graphics drivers till you have a stable system.
A. Athlon 1.34Ghz 256DDR PSU info 3.3v 28A / 5v 30A / 12v 15A
I know this is a crap PSU, but I was told it would just be lacking in the USB department.....and we dont need that. This is just a work station.
B. All parts were bought NEW. But that was 1 year ago. I formated the drive to have an OS in a clean state.
C. they seem to work for ever in SafeMode. Seems to be some sort of driver issue.
BIOS on the baord is at 1.6 Seems to be current.
I have UNINSTALLED the video drive rin safe mode and my video has returned.
I am now downloading the driver provided on the MSI website to try vs using the one at nVIDIA.

Blac kscreen after windows logo - broken graphics card?

Model: HP Notebook PC G62-b41EO
Product: XX509EA
Windows 7 Ultimate (Originally Windows 7 Home Premium)
While editing a video for YouTube, I got a bluescreen and my notebook PC shut down. When I restarted it everything was normal, until Windows had loaded, and after that everything went black.
I am almost certain that this is a graphics card problem:
* When I disable the graphics driver in the Windows Device Manager I can start the computer normally.
* In the device manager I get an error message on the GPU, saying that it couldn't boot because it isn't functioning properly.
The graphics card is an ATI Mobility Radeon HD 5470 Graphics (switchable)
I tried several things, nothing has worked:
* Updated graphics driver
* Did a system restore, reinstalled operating system
* Did a system check in startup options
* Did a hard reset
* Connected an external display, this caused another bluescreen.
My guess is that the graphics card just had enough and died. My 1 year warranty period is over. What can I do?
This question was solved.
View Solution.

The only fix is a new motherboard or have the motherboard repaired.
This ebay seller is an example of the services that are out there. You can save quite a bit if you can remove the motherboard from the chassis:
http://www.ebay.com/itm/Hp-Compaq-g72-g71-g62-g61-cq72-cq71-cq62-cq61-Amd-Motherboard-Repair-Service...

Black screen after startup - Satellite A105-S4334

it gives me black screen after windows logo display right after the appearance of the cursor, and nothing i can do except hold on the "Turn off" button, and then restart again, it shows the menu to whether to start in safe mode ... network mode ... normally or lastest know good windows start ....
when it starts for the second time it works fine, it does this all the time and now i'm reinstalling windows for the 2nd time (factory-state) any solution or explanation for this issue?

no, i didn't, nothing connected to it yet.
what trials i did:
i reinstalled my own windows XP and it didn't show this, but because the PowerSaver error msg. and returned back to the manufactuer state CD, and same black error occurs.
Notices:
1- when i do restart it doesn't happen
2- right away after it happens and hold on the power button till it shuts down and turn it on again, and it works fine.
3- i don't know is this has nothing to do with DVD/CD rom message comes after start up asking to disable DVD-Ram option or not? but i always answers NO
hope these info helps you helping me :)

Black Screen before Windows XP Logon

First of all: Hi everyone! I've been reading thesse forum for some time, but I could't find exactly my problem.
I have Windows XP Pro Corp installed on my PC. When I start the computer and Windows is loading, appears the initial screen (that with black background, and the Windows Logo and a blue progress bar). After that, the logon screen should be displayed, but instead of it, the monitor gets black, just like if it was turned off.
I tried to make some fixes, using the Windows Recovering Console, repartitioning the hd... I even installed Windows 2000. When I do that, the system seems to work properly for a few days, but after those few days, it happens again.
I know it's not a problem of the hd, because I ran the seagate tests twice (almost 9 hours!! ).
I suspect is the Kingston memory, because I read somewhere that there is an issue between MSI i865PE Neo2 and a some Kingston DDR modules.
Please, can you help me? I've spent 850€ on my new PC and I can't make it works.
Thank you very much.

You wont harm your RAM with 2.7 Volts And Believe Me Lokk at Everyones Signatures, or Look in the FAQ's by Maesus, Raising the DRAM Voltage is the First thing we tell people to do if there is a Problem booting the PC......And as Far as the AGP Aperature is concerned, Depending on how much memory you have in your system (512MB) and How much RAM is Onboard the Vidio Card, I have mine set to 256MB, but I also have Twice the Amount of System RAM, and Both of My Vidio Cards Also Have 256MB of Vidio RAM onboard..I would Suggest that you set your AGP to Either 64 or 128MB, and You Really Should Invest in another 512MB RAM Module, so you can Enjoy the Performance that your Motherboard is Supposed to Operate at, when you have 2 Modules of RAM installed, 1Module in DIMM Socket A-1, and the Other module in DIMM Socket B-3, and you Must Make sure that you Get the Same Memory Type and Size Module that you have now, Meaning you cant go out and Buy another Stick of 128MB or a 256MB Stick of RAM, it Has to Be a 512MB Module......And here is an AGP Aperature Article, and Believe Me, AGP aperature is Nowhere Near as Important as it Used to be, Because of the Size of the Onboard Vidio Card Memory of Today 128MB as the Lower amount of Card memory, and 256MB as the Norm, it made a Difference when Vidio cards had a Norm of 8-12MB, and 32 Was alot , so it is Not as Critical these Days >>> http://www.tweak3d.net/articles/aperture-size/ .........Let us Know when you make the BIOS Changes.....................Sean REILLY875

Black screen while installing windows 7 on SL400

Hi
I am installing windows 7 on my laptop SL400. After windows logo i am getting black screen with cursor.
Regards,
Vivek

Did you check Apple Support Boot Camp article?
iMac displays a black screen during installation of Windows 7
http://www.apple.com/support/bootcamp/
Installation Guide
Instructions for all features and settings.
Boot Camp FAQGet answers to commonly asked Boot Camp questions.
Windows 7 FAQAnswers to commonly asked Windows 7 questions.

G62-A30ST BLACK SCREEN

When i open my computer it stuck after windows logo as black screen. I try to format my laptop 2 times and still the same after I install my ati 5470 driver which is downloaded on hp's driver page. Can anyone help me on this problem because i dont know what to do anymore?

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP G62-a30ST Notebook and having a black screen on startup. I would uninstall the driver and restart the Notebook. Then run the HP Support Assistant.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating. Hope this helps. Thanks.

Black screen right after Windows Logo screen

Similar Messages

Maybe you are looking for