Black screen when I turn on Satellite M

When i turn on the notebook, i cant get into the system, just black screen, after i tried several times, then i can get into the windows system.
What is the problem???
Tanks ,buddy

Hi
Are you able to access the BIOS?
If not then there could be a motherboard problem
Did you try to connect the Satellite notebook to the external monitor to check if something would be visible on second screen?
I think this would be helpful to get more information about possible hardware issue
If an second display would stay black too, then an graphic card issue might be possible
However, I doubt you could fix it yourself. In most cases its a job for an technician

Similar Messages

  • HP G42-475DX Black Screen when first turning on.. Caps Lock light blinking.. HELP!

    The subject pretty much sums it up..
    I go to turn on my laptop 2 days ago.. and my computer pretty much took a crap.. I would like to fix it myself without having to go and pay for repairs.. On top of that I had ordered a new laptop for college that is already on it's way so I would really not like to pay for repairs.. I have several Recovery disks that BestBuy gave me when I had purchased my laptop from them. I try to put a disk in.. and nothing happens the screen is still black. When i turn it on it doesn't even show the HP logo either... HELP ? Please! Thanks! 

    Hi,
    Please try a hard reset and see if it works.
    1. Power off your laptop
    2. Remove the a/c adapter, battery and everything that is attached to your laptop.
    3. Hold the 'POWER 'button down on your laptop for about 10 seconds.
    4. Plug in the a/c power supply (without battery) and power on.
    Also plese chack the following link:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • White screen when I turn the Satellite M50 on

    I intermittently just get a white screen when I turn the computer on. Usually the problem is solved by switching the computer off and trying again - but sometimes I get a white screen again.
    It seems to be connected to use of external devices - can anyone give me clear instructions about what should/should not be connected when I start and shut down the computer? Or any other suggested solutions?
    Thanks

    Thanks for your reply/advice - and the tip about Antivir. I used to use AVG and then Norton came as a package with this laptop....will have a re-think when my subscription need renewing.
    I have updated the display/graphics driver but am still having the same problem of a white screen at boot-up. On reflection I think it is possibly a loose connection as I have just been a long trip with the laptop - including a fairly bumpy 4 hour bus ride - and I recall having the same problem several months ago which self-corrected after a similar trip (taking it down to a Toshiba ASP who never saw it as they were closed for the week-end and I had to get back to work!). This may sound strange but I took the laptop for a walk yesterday to see if any loose connection would shift and it then booted up on the second attempt rather than the 8th!
    I guess I'll have to take it to the ASP - unfortunately it's no longer under warranty.
    EDIT:
    Problem solved. High temperature caused this issue
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=23402

  • My iMac has a black screen when I turn it on.

    When I tune on my mac it goes straight to a black screen.  What do I do to fix this?

    You are posting this in a server/enterprise message board. You might have better lucking posting it somewhere else.
    You can try hooking up an external display to your iMac to see if it's a problem with the iMac screen or the logic board. If you get an external display picture, then you probably have a display problem in your iMac (bad lcd, bad back light, bad power to display, etc).
    Also, try unplugging your computer from the electricity, holding down the power button for 15 seconds, and then plugging it in again. This resets the power management system, just in case something got buggy.
    Good luck!

  • How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • Satellite U405 Black screen when I surf in the internet

    Dear, I am a student in grade three and my laptop has a problem I want help. It will be black screen when I surf in the internet for over 3 hours. Why?
    I guess my laptop battery is the key to the problem and some friends recommend a battery web for me.
    what do you think about it?

    I have no idea why you are thinking that battery cause this issue???
    In your case I would say that your graphic card driver has crashed
    I recommend reinstalling or updating the graphic card driver to check if this would help to solve this

  • Yoga 2 Pro - Black screen when on tablet mode

    Hi,
    2 weeks Yoya 2 pro out of the box, and get a black screen when reaching the tablet mode (back of the lid touching the back of the laptop base).
    I try hanged the setting under power management, with no success. When reaching the tablet mode, I get the same result as closing the lid in laptop mode.
    I connect my Yoga 2 to a TV through the HDMI and can see the screen and interact with the black screen (not easy to touch the right spot).
    My bios is updated and I have Windows 8.1.
    Any suggestion???

    I found the answer to my problem at
    http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Bios-Update-Crash/m-p/1322487/high...
    Now that I found that post I do recall the instructions telling me to turn it off manually when I updated the bios earlier this year. However, the current instructions do not mention it at all, perhaps they should be updated?

  • Why do I get a black screen when i click on a PDF in a web page?

    why do I get a black screen when i click on a PDF in a web page? Firefox works as is should.

    Hi,
    From your Safari menu bar click Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, then relaunch Safari. Try a PDF file.
    If it's not Extensions, open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder then the Internet Plug-Ins folder. If you see any files such as this:
    AdobePDF Browser or Viewer Plug-in
    Move it to the Trash, relaunch Safari.
    Carolyn :-)

  • Black screen when opening in .pdf

    I'm having problems with opening the C5-project in .pdf. Some people get a black screen when opening the .pdf file (version 9 or higher), most of the time it goes well, but 1 out of 10 times it doesn't work. I have know idea what could be the cause of the black screen (use of laptop?).
    Now it is impossible to send this project to our stakeholders, because I don't know whether it works or not.
    Does anyone recognize this and knows why this happens, and how to solve this?

    There was a recent patch released by Adobe for Captivate 5 that addressed a similar black screen issue in Captivate SWFs.
    You can get the patch here: http://www.adobe.com/support/captivate/downloads.html
    It may turn out to fix your issue as well.

  • HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

    I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

    Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
    I hope I helped
    thanks
    Lydia

  • .mov from 4S is black screen when played with QT and QT 7/lion

    Q1. .mov from 4S is black screen when played with QT and QT 7 on lion/mac book pro.
    Q2   Also I want to burn it in DVD with common video format. Any recomment free burner software?
    Very very very urgent!! Please help.

    Hello there,
    I have a similar problem! Windows 7 shutdown unexpectedly and since that I can not reboot in windows anymore only with safe mode where everything is a mess.
    Also when it's trying to reboot in windows a blue window appears,says something about drivers  and it is counting something (79.78...till100)but  I m not able to read it cause it disappears immidiately and then black screen and then it turns to reboot in mac which works fine.
    I m sorry if I confused you with my english...
    If anyone knows please help!
    Thanks

  • 970 GAMING black screen when boot on cold start, have to clear CMOS everytime

    I have 970 GAMING w/ FX8320, it shows black screen when boot on cold start, have to clear CMOS everytime to enter default.
    I have updated it to the up to date M11 bios. Once it boot up, it functions OK no matter whether you reboot or reset it. But after turned off a few hours (cooled down), it shows on black screen again on boot, all LED lights up OK, but I can hear the fan like keep rebooting, any idea?
    PSU seasonic 430W, GPU HD7750.

    In what DIMM slots did you insert your memory?  I just got and at this moment building a new computer with a 970. 
    A horrible experience I had with my last build reminded me of it.  My board was am MSI A88XM-E45.  DIMM1 is blue, DIMM2 is black, DIMM3 is blue, & DIMM4 is black.  When using two sticks of RAM, it says to install one on DIMM1 & the other in DIMM3 (Makes sense... After all, it's color colored that way).
    Well it would not boot.  I reseated every component and for HOURS tried almost everything.  Finally I decided to place my two sticks of RAM in the first two DIMMS and viola!
    I think I will begin this build the same way.

  • Ipod camera black screen when opened and sync prob HELP!!!

    hello i just went to open the camera on my ipod touch 4g and it just went black just a black screen when i press the home button it goes straight to the home screen everything else is fine i just open the camera and a black screen appears, it is working fine now but just wondering if it is faulty or somthing.
    some times it does not sync i will plug it into the computes usb port and it wont charge i takes about 3 to 6 tries to get it to work any help thanks 

    Same thing just happened to me, found another solution though. 
    Plug the USB cable into your PC/base of iPod Touch.
    Turn off the iPod completely.
    Wait 10 seconds and re-power the iPod.
    Now load up the camera; and the screen should be back to normal.
    I have similar screen freeze issue with my Sony Erricson K700i Mobile phone, and plugging in the 'power' cable always resolves it, so it would seem to be of the same method used to resolve this iPod issue!!
    Strange thing as you've posted, all other apps etc still work.  Maybe support will get around to resolving this bug!! 

  • Hey i have an ipod touch 5gen ,it has stopped responding and is showing a blank black screen.when ever i connect it to itunes it gives a sound of the connection. what am i suppose to do?(ios7)

    hey i have an ipod touch 5gen ,it has stopped responding and is showing a blank black screen.when ever i connect it to itunes it gives a sound of the connection. what am i suppose to do?(ios7)

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • On my iPad2 I get a black screen when Itry to open FaceTime.  Others can contact me and the camera and audio work.  How do I fix this problem?

    On my iPad2 I get a black screen when I attempt to open Face Time.  Others can contact me and they come in with video and audio.  I can chat with them as well.  Is there a fix for this?  I have verified my email address twice.  I have turned FaceTime on and off several times as well. 
    Thanks,
    Bill

    I double clicked the round button when the icons appeared I held down and selected the FaceTime icon while it was shaking I selected the minus sign on the FaceTime icon closing it out.  Then I restarted the iPad and bingo FaceTime works now. 

Maybe you are looking for

  • Why is itunes so hard to use - and why can't apple fix it?

    why is itunes so hard to use - and why can't apple fix it I dont know anybody who likes the way itunes works.' This last version is beyond awful. It took an already hard to use program - but one that I had at least figured out and made it even harder

  • Solved!!Error when starting HTTP Server

    Hi againg When restarting the HTTP Server I receive the following error HTTP Server.      Using Web Configuration View JVM:           Java Virtual Machine initialized HTTP Server:     Java Virtual Machine Loaded DSAP Filter ‘SAP Ticketcerifier V2.5.2

  • App updates in iOS 7

    Did I understand that the apps we're suppose to update themselves rather than going to the App Store and clicking on update all?

  • How to get hidden field  in popup  window (using jsf)

    Hi, I have one hidden field in page first.jsp like <h:inpuHidden id="checkedVals" value="" />. from first page i am opening popup (second.jsp) by onclick with command button. how can i get the hidden field in second.jsp? I want to make a hidden field

  • Import my Itunes from Macbook to Macmini

    I have a 3 year old Macbook and a new Mac mini. I am trying to move the music from my Itunes on Macbook to the new mini. Home sharing only works when both computers are on and Itunes is open on both? There must be a way to transfer the music, right?