Black screen when MSI driver is installed (MSI R9 270X 2GB )

Bought new computer and everything worked fine until couple of days ago ..
can pull some info ..
Windows 7 Ultimate x64
AMD 8350FX 8-core
ASUS Sabertooth 990FX R2
MSI R9 270X 2GB GDDR5
8GB 1866MHz RAM
120gb SSD Kingston HyperX
Everything worked fine even with the drivers that are there now but one day the screen started to fluttering and act strangely then windows crashes. I rebooted then when I want to log in or when the login page will show I only got black screen...
Reboot again ... go into " safe mode " ... screen works with standard VGA ... uninstall the drivers for the MSI card ( msi.com ) ... restart ... everything works .
However, it goes on the standard VGA but as soon as I install the drivers, I get the same problem ....
What has happened?
Got NO clue right now .. drivers worked before , I haven't updated them since I installed them (3weeks ago) I have not done anything that I can think of ..
Are grateful for answers!

I have the same problem. Updated driver to 13.11 beta was running my MSI 2GB r9 270x for 3 days got it on the 24th and today after a system reboot the windows screen appears to load then goes to black. I started safe mode, uninstalled the ati graphics drivers, rebooted and windows booted fine. Reinstalled the lastest 13.12 driver and rebooted to the black screen again.
Specs:
Board: P7P55D Asus
PSU: Cooler Master Silent Pro M850 @ 850 W output SINGLE 12V channel at 66A
VCard: R9 270x MSI 2G
Proccessor: intel i5 750 @ 2.66 GHZ
Did not overclock the video card or touch the voltages, tried VBIOS updates to fixed the screen flicker and it worked find the flicker dissapeared after the this new black screen problem happened i reverted back to the stock VBIOS the card shipped with(saved it before i updated it) reverting to the stock VBIOS didnt fix the problem only removing the driver fixes the problem, any help would be greatly appreciated.
Thanks for your time,
Empirus

Similar Messages

Black-screen when finalizing Windows 7 install and a few other things

hi! ill get right to it.. i recently decided to install Windows 7 on my iMac due to the fact that i want more
flexibility when it comes to gaming. i made a partition using Boot Camp, then rebooted with the Windows 7 cd.
after a reboot or two the installation seemed to be coming to an end.
however, when Windows was starting up to finalize the installation the screen just went infinite black.
so thats where im stuck right now. however i have seen alot of discussions on different forums (with positive feedback)
on how to fix this problem with ease. apparently, one way of doing this was to delete atikmdag.sys from the Windows 7 System32 folder,
and then start Windows without problems to complete the installation.
and heres the problem im facing on top of it all: i downloaded MacFUSE in order to be able to see/gain access to
my Windows partition. the problem is, when i try to delete atikmdag.sys or anything else i am not allowed.
the entire partition and all files within seems to be write-protected. my rights are read only - and it seems that
i cannot change this. how come?
i am logged in as admin and i have all rights available for my files and folders on my mac-partition..
if there is no way of altering the permissions for the Windows 7 partition via OS X in order to
delete this atikmdag.sys file, how can i solve my Windows install problem? is there
any other way of doing it?
please help, i want to get Windows 7 running

You might want to reformat and re-read what you had.
Apple Boot Camp Support
Black Screen iMac
I recommend buying Paragon NTFS if you really need to write to Windows (you shouldn't, I never have but had used NTFS driver at one time).
PARAGON Software
Camp Tune Paragon-Software

MSI GeForce GTX 760 2GB - Black Screen When trying to load games

Ok so I've been trying to figure this out the past 2 weeks and cant figure out whats wrong.
Whenever I try and load a game more my screen goes black and I can hear sound but nothing is is being displayed. I cant task manager out or ALR-TAB out. It just sits there and I have to power down my computer manually.
I've re-installed the drivers and have tried a different power supply since those are the 2 things I thought it would be and nothing is working.
Any help would be very much appreciated

Quote from: flobelix on 18-March-14, 05:51:00
Uninstall current driver in safemode using >>Driver Fusion<<. After reboot install current MSI driver: http://download.msi.com/dvr_exe/nvidia_33165_v7864_vga.zip
Did it twice and it still gives me a black screen when going into a full screen on games.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

970 GAMING black screen when boot on cold start, have to clear CMOS everytime

I have 970 GAMING w/ FX8320, it shows black screen when boot on cold start, have to clear CMOS everytime to enter default.
I have updated it to the up to date M11 bios. Once it boot up, it functions OK no matter whether you reboot or reset it. But after turned off a few hours (cooled down), it shows on black screen again on boot, all LED lights up OK, but I can hear the fan like keep rebooting, any idea?
PSU seasonic 430W, GPU HD7750.

In what DIMM slots did you insert your memory? I just got and at this moment building a new computer with a 970.
A horrible experience I had with my last build reminded me of it. My board was am MSI A88XM-E45. DIMM1 is blue, DIMM2 is black, DIMM3 is blue, & DIMM4 is black. When using two sticks of RAM, it says to install one on DIMM1 & the other in DIMM3 (Makes sense... After all, it's color colored that way).
Well it would not boot. I reseated every component and for HOURS tried almost everything. Finally I decided to place my two sticks of RAM in the first two DIMMS and viola!
I think I will begin this build the same way.

Apple TV blurry black screen when streaming from iMac?

My Apple TV shows a black blurry screen when trying to stream from my 2013 iMac. ATV works perfectly with iPad/iPhone but not iMac. Audio from iMac is fine, just no video. Both products are entirely up to date as far as software goes and restarting both + wifi hasn't achieved any results. Any **** would be appreciated, thanks.

I've found out it is an Mavericks 10.9.2 and 10.9.3 failure! Online I have found more people with the very same Problem, and all of them are running 10.9.2/3 - ON THEIR IMACS (different Models)!
My Apple TV and Streaming Services were functioning just fine 2-3 Monts ago, the only thing that changed was Updating my iMac Mid 2011 to 10.9.2 -> Then i've got the black screen when streaming, could not activate DisplayMirroring, when i played something in itunes or VLC the sound went through AppleTV but no video.
Then have checked it with iPad 2 = OK, iPhone 5 = OK, MBP Early 2008 with SnowLeopard = OK,
so i decided to Install an 10.9 on an external drive - and guess what? It works! Tried to Update (ComboUpdate) to 10.9.1 and it was still OK, got the BLACK SCREEN after ComboUpdate 10.9.2, and tried to Install 10.9.3 just to see if it will solve the problem -> NOT
this must be a joke!

Why do I get a black screen when i click on a PDF in a web page?

why do I get a black screen when i click on a PDF in a web page? Firefox works as is should.

Hi,
From your Safari menu bar click Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, then relaunch Safari. Try a PDF file.
If it's not Extensions, open a Finder window. Select MacintoshHD in the Sidebar on the left. Now open the Library folder then the Internet Plug-Ins folder. If you see any files such as this:
AdobePDF Browser or Viewer Plug-in
Move it to the Trash, relaunch Safari.
Carolyn :-)

Why do I get a black screen when I start my macbook pro?

why do I get a black screen when I start my MacBook pro?

Hello szimmerli2 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.

AIR - black screen when packaged

When I run the application from Flash Develop everything is fine, both in Debug and Release.
After the application is packaged and installed, I just get a black screen when run.
However if I add a 'debug' file to applicationDirecty\META-INF\AIR\debug the application runs normally.
What could be causing this? and how can it be solved?

A debugging utility seemed to be causing the problem in the release build... removing calls to this solved the issue.
/** Gets the name of the function which is calling */
public function Log(prefix:String = "", suffix:String = "", params:* = null):void
    var error:Error = new Error();3
    var stackTrace:String = error.getStackTrace();     // entire stack trace
    var startIndex:int = stackTrace.indexOf("at ", stackTrace.indexOf("at ") + 1); //start of second line
    var endIndex:int = stackTrace.indexOf("()", startIndex);   // end of function name
    var lastLine:String = stackTrace.substring(startIndex + 3, endIndex);
    var functionSeperatorIndex:int = lastLine.indexOf('/');
    var ClassSeperatorIndex:int = lastLine.indexOf(':');
    var objectName:String = lastLine.substring(ClassSeperatorIndex+2, functionSeperatorIndex);
    var functionName:String = lastLine.substring(functionSeperatorIndex + 1, lastLine.length);
    trace(prefix +" " + "[" + objectName + "]" + " > " + functionName + " " + suffix);

Satellite U405 Black screen when I surf in the internet

Dear, I am a student in grade three and my laptop has a problem I want help. It will be black screen when I surf in the internet for over 3 hours. Why?
I guess my laptop battery is the key to the problem and some friends recommend a battery web for me.
what do you think about it?

I have no idea why you are thinking that battery cause this issue???
In your case I would say that your graphic card driver has crashed
I recommend reinstalling or updating the graphic card driver to check if this would help to solve this

Yoga 2 Pro - Black screen when on tablet mode

Hi,
2 weeks Yoya 2 pro out of the box, and get a black screen when reaching the tablet mode (back of the lid touching the back of the laptop base).
I try hanged the setting under power management, with no success. When reaching the tablet mode, I get the same result as closing the lid in laptop mode.
I connect my Yoga 2 to a TV through the HDMI and can see the screen and interact with the black screen (not easy to touch the right spot).
My bios is updated and I have Windows 8.1.
Any suggestion???

I found the answer to my problem at
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Bios-Update-Crash/m-p/1322487/high...
Now that I found that post I do recall the instructions telling me to turn it off manually when I updated the bios earlier this year. However, the current instructions do not mention it at all, perhaps they should be updated?

I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

I attempted to use netflix on my MacPro safari 10.5.8, I get a blank black screen when I attempt to watch a video, Has anyone encountered and solved this dilemma?

I also have downloaded netflix "Silverlight" I believe successfully...at least acoording to the popup at the end of the Silverlight download "You have successfully downloaded Silverlight"

My iphone 4s goes to a black screen when in use of any apps. after the update to ios6 any ideas for a fix?

Since i updated to ios 6 my iphone goes to a black screen when it is in use. I could be texting and 5-10 sec later it goes to a black screen and than to the home page. Its also will be when playing games and so on. Can you please help me with this? I have tried resetting my phone, press the home button 2 time and canceling any running apps and even press home and powering button and still does the same thing. I need help!!!! Any suggestions?????

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

My ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

Black screen when MSI driver is installed (MSI R9 270X 2GB )

Similar Messages

Maybe you are looking for