Black screen windows 10 at the second turn

Hello
I have a strange problem after installing Windows 10 at the second turn on the computer black screen with no cursor display on the computer is not responding as they walk fans can be heard when the black screen that the Windows logo is so fuzzy and these dots also tried to install Windows 10 but the same even downloaded files I looked at the other monitor also does not work and yet how is this black screen that you can turn off the computer by disconnecting the power supply and turn again how it works but for re-inclusion happens as I described, please help there is no record of a drivers like what all I

I should mention I installed Windows in gpt/uefi.
Therefor I believe the CSM reveals both the Intel HD4000 and the GT650M.
Both show up in the devicemanagement tool of Windows.
Maybe I have to disable the Intel GPU somehow?

Similar Messages

MacBook Pro won't boot - stays on black screen and beeps every few seconds

Hi,
My MacBook Pro has been having issues - when powered on wont boot past the white screen and more recently will just stay on black screen and beeps every 5 seconds. I had someone look at it and it seems apparently the motherboard is the problem
and either needs fixing or replacing. As I am traveling in Nicaragua the closest apple store is in Managua (capital). Would I be able to get the motherboard looked at and replaced if need be at this apple store? Also, does anyone know the approximate price for the motherboard to be replaced? Up until a few days ago the laptop was still turning on and working every now and then but now stays on black screen and beeps.
Any advice would be very helpful!
Thanks

Welcome to Apple Support Communities
It means that your Mac's memory is damaged > http://support.apple.com/kb/HT2538?viewlocale=en_US&locale=en_US
First, replace the memory modules. You can buy more memory at OWC or Crucial. It can also be replace by a reseller.
If it doesn't work, the RAM slots are damaged, so your logic board has to be replaced. It costs more than a half of the price of your MacBook

I see only black screen windows when upload pdf documents in safari

Hi. I see only black screen windows when upload pdf documents in Safari. Also in old version of Safari, and in old System. In some windows, i can save the document, only now i can see this, open from pdf reader. Thank for some info.

Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
I've seen an unconfirmed report that the "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you might need to remove it as well, if applicable.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can't continue: unexpected failure during app

I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'. That was the first window. Heres the second: After Effects can’t continue: unexpected failure during application startup I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
I'm baffled....
Ben

I have an ipad 2, 16GB 3G WiFi, black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?

I have an ipad 2, 16GB 3G WiFi, worked perfectly, but now black screen, will not reset, restore or turn-on, keeps prompting error 1600 when trying to restore from recovery mode, but when other ipad 2 plugged in itunes works fine. Any idea's on how to resolve?
I have tried multiple laptops with both units, re-installed Itunes, same error message on one of the units but ok on the other. Thinking I have a defective Ipad 2, any ideas on what to do is greatly appreciated.

Tried Google? iPad error 1600

Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPad 2 has a black screen which lights up to a grey black screen when I press the power or home button

iPad 2 has a black screen which lights up to a grey black screen when I press the power or home button but I dont see the apple logo. The battery is fully charged and when I plug it in to my computer, I can use iTunes to do everythng except backup the iPad since its passcode locked. Please help me resolve this problem. I don't have apple care

Yup! I've been there! You just have to double-tap the screen with three fingers and the zoom should go back. You have to turn off the feature in Settings>Accessibility>Zoom>and turn the switch off so this won't happen again when you double-triple tap.

Our ipad 1 goes to a black screen periodically when using the internet.

Our iPad 1 goes to a black screen periodically when using the internet. We have to hit the home button and hope we end up back at the site we were previously at. We have updated the iPad, but it still happens. Any suggestions on a solution?

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

HT1363 my ipod doesn't show the black screen . it immediately shows the apple logo

i want to put my ipod into disk mode and when i reset it my ipod doesn't show the black screen . it immediately shows the apple logo

The iPod touch does not have a disk mode.
This is the iPod touch forum

I am having trouble running videos through Safari but not Google Chrome. All I get is a black screen. I have the latest adobe flash update and have enabled plug ins. any suggestions?

I am having trouble running videos through Safari but not Google Chrome. All I get is a black screen. I have the latest adobe flash update and have enabled plug ins. any suggestions?

Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Not empty the Safari cache.
From your Safari menu bar click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Now try a video.

Iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

iphone 4s is working for example can play,music recieve texts ,calls ect but has black screen and have tried the force shutdown method but still can see what im doing on the screen

Did anything happen to prior to your phone acting this way? It sounds like your screen is dead, but it is hard to say without knowing what what the cause.
1) was this a gradual problem? Did the phone screen start dimming a couple months ago and now has degraded or after some event (known or unknown to you), the phone started behaving this way.
2) Can you give more specifics on the problem? You said you have a black screen, but also you can see what you're doing on screen. Is the screen just really dim? Is the screen completely black? Does anything else besides attempting to reset the device cause it to flash white?

My iphone has a black screen, when I attach the charger i get a beeping noise. It does not seem to be charging ?

My iphone has a black screen, when I attach the charger i get a beeping noise. It does not seem to be charging ?

try a reset, hold down the home/power button together until you see the apple logo and then release then wait for the phone to boot back up.

Yesterday i just try to open my iPad but i had a black screen. I can hear it working but i cant see anything. I tried all kinds of restore reset everthing but i still got a black screen. Anyone has the same problem and got a sollution? Thanks in advance..

Yesterday i just try to open my iPad but i had a black screen. I can hear it working but i cant see anything. I tried all kinds of restore reset everthing but i still got a black screen. Anyone has the same problem and got a sollution? Thanks in advance..

See this Discussion
https://discussions.apple.com/message/19521062
The principle is the same...

Iphone 4 has a black screen which will display the apple logo for approx 10 seconds, then goes blank for 10 seconds and so on. I have tried a hard reset with power button and home button but no change. Get no response when attempting to connect to itune

iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again. Same action over and over.
I have attempted hard reset but cannot complete. Also attempted to connect with itunes and it does not recongize device.
Device is frozen in this display loop. Have an appointment with genius bar tomorrow but it's a 2.5 hour round trip so suggestion appreciated.

Your device may need to be restored as new in iTunes (instead of restored from a back up as it seems that there is a software issue on your phone).
If your phone is not able to connect in iTunes try forcing recovery mode (http://support.apple.com/kb/HT1808)
* power off your phone.
* Hold the home button while connecting your phone to iTunes. You should see the connect to iTunes window and your computer should give you the recover mode alert.
*Restore your device as new. Being sure not to restore from a previous back up.
You will then want to sync your information back to your device from Outlook, iCloud, Google or wherever your information is stored.

Full screen playback on second monitor results in having to force quit Premier if a window opens on the second monitor.

Run into this problem a few times now. If I have full screen playback going to my second monitor, and then I try to do something like link media and the link media window opens on that second monitor I can't figure out a way to get to it. I end up having to force quit. Because the link media window causes all other application buttons to disable while it is open I have not been able to find a solution other than force quitting, reopen and disable full screen playback, open link media window and move it to the other monitor and then again enable full screen playback.
Has anyone run into this? Am I missing an easy solution?

You need to set up your Graphics Card Application first eg A and B Monitors , side by side etc.
In my case..a NVidea Display Application does this from the Control Panel
Then the second monitor will appear in display setting (Premiere).
My second monitor is entirely dedicated to full screen playback display.

Black screen windows 10 at the second turn

Similar Messages

Maybe you are looking for