Black Screen with Adobe TV

Greetings.  This is my third e-mail regarding this issue.  I did not receive a response from my last e-mail.  The tutorials on Adobe TV will not run on my computer.  I am using the Photoshop CS6 tutorials, from the Learn Photoshop CS6 web page.  I tried making all of the changes and adjustments from the following link, to no avail:
http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_Flash_Player_ information
All other videos appear to work correctly on my computer.  I am running Windows XP, with the maximum amount of memory.   Your help in this matter is greatly appreciated.  Thanks.

Hi,
You might get a more complete answer in this forum:
http://forums.adobe.com/community/flashplayer/using_flashplayer?view=discussions
What internet browser are you using to try and view the Adobe TV tutorials?
Do you know what version of flash player is installed?
Are these the ones you can't watch?
http://tv.adobe.com/show/learn-photoshop-cs6/

Similar Messages

  • Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video?

    Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)

    You asked your question on the wrong forum. Try one for the Flash Player

  • HAVE NEW 13.3 MAC AIR AND when using it to open sites in safari I have no issue until I go to a link page that is a pdf file or I am trying to save the screen info as a pdf. I only get a black screen with no data, cannot find solution in help menu

    HAVE NEW 13.3 MAC AIR (previously, still have 13.3 MCbook pro which works captures what I am looking for an answer to)
    when i open sites in safari the page opens fine if it is not a pdf based page.
    Once i open a site that has a link to another page that is a pdf based page the page comes up as a black screen with no info showing
    If I open a site that gices me an open to save a file to a word, excel type document or a pdf , everything works fine until I try to save the information to a PDF and again the screen goes black
    I have tried the safari help site but to no avail, does anyone have a solution to thid problem. (I do have the abode ofr mac program loaded)

    If you delete all the Adobe Reader stuff it will probably fix this. For almost everything, the Apple pdf handling works better.

  • New screen standby bug (black screen with mouse cursor)

    It seems there is a new issue with adobe messing up the monitor standby process.
    This time the monitor turns of at the setup time, but after a few minutes turns on again showing a black screen with the mouse cursor in the middle.
    Happens with me if i have any kind of webbrowser running in the background, as soon as i quit the browser my screen stays off again. But with open browser windows it often turns on again and shows the black screen with the mouse cursor.
    Anyone else experiencing this problem?

    I haven't been able to reproduce this.  What makes you suspect Flash Player?  Do you see this behavior if you uninstall the player?  What output do you get if you type the following commands in a command prompt window?
    powercfg -lastwake
    powercfg -devicequery wake_armed
    Thanks,
    Chris

  • Why is an mov file showing up as a black screen with only audio?

    I am importing a mov file into elements 11 and it is only showing up as a black screen with audio.  The clip will play in other programs on my computer but is not importing into elements 11.  The file was created on my panisonic camera.  I am pretty new to video editting and am quite frusterated.  I'm assuming it is some sort of codec issue but don't know how to proceed.  Thanks for any help.
    't

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/
    IF your camera uses MJPEG read... MJPEG http://forums.adobe.com/thread/730396
    >new to video editting
    Some reading...
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -start at http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/1479311200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
    Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/

  • CC causes black screen with cursor

    Quite a number of people, including me, are noting that when the Creative Cloud app is active and showing in the menu bar, when my rMBP goes to sleep, and I try to resume immediately, for 5-8 seconds I get a black screen with cursor.  If I close down CC, there aren't any issues.
    Something more for Adobe to fix.
    Info:  Late 2013 15" rMBP w/ 2.3 i7, 16gb RAM, 512 SSD, OS X Mavericks 10.9.5

    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests

  • Black screen with logo

    When I go to www.acrobat.com, and pick any button on the
    screen other than "Adobe Connect Now", I get a black screen with
    the acrobat.com logo in the middle.

    I am experiencing a similar issue as DNAPrimer with my
    configuration, i.e.:
    OS:
    Microsoft Windows 2000
    Version 5.0 (Build 2195: Service Pack 4)
    BROWSER:
    Microsoft Internet Explorer
    Version 6.0.2800.1106 (Service Pack 1)
    FLASH PLAYER:
    Version 10.0.12.36
    (A month or so ago, Buzzword (for example) *did* work. Now
    after filling in the Adobe® Buzzword® sign in box, it
    displays: "Signing in..." and then I get a totally black browser
    window with the following URL displayed in the address area:
    https://buzzword.acrobat.com/#o
    Refreshing the screen does not help.
    Trying to go "back" (Alt+left arrow a couple of times) brings
    up the word "Launching..." but then the black screen recurs.
    Edit (addenda):
    I can still access Buzzword on a
    coworker's computer which has the following configuration:
    OS:
    Microsoft Windows XP
    Version 5.1 (Build 2600.xpsp_sp3_gdr.080814-1236 : Service
    Pack 3)
    BROWSER:
    Microsoft Internet Explorer, version 7.05730.11
    FLASH PLAYER:
    Version 9.0.115.0
    I also noted that after Buzzword connects on my coworker's
    computer, the following text appears in the browser's "information
    bar" above the Buzzword window: "This website wants to run the
    following add-on: 'Microsoft (R) Script Runtime' from 'Microsoft
    Corporation'. If you trust the website and the add-on and want to
    allow it to run, click here..."
    By the way (back on my Windows 2000 pc), I noticed that the
    "privacy report" blocked a couple of cookies when I got to the
    Adobe® Buzzword® Sign in screen:
    1) https://www.adobe.com/uber/js/omniture_s_code.js
    2) https://sstats.adobe.com/b/ss/mxmacromedia,... (this is a
    very long URL)
    Also, if I right click on the window when the "black screen"
    appears after signing in, I see the grayed out words "Movie not
    loaded..." and below that the available choice "About Adobe Flash
    Player 10." I think I had Adobe Flash Player 9 installed when
    Buzzword
    used to work, but then I upgraded to Adobe Flash Player 10
    because of the vulnerabilities discovered in the earlier
    versions.)

  • When I click to open a photo it opens a black screen with a grey triangle, exclamation mark in the middle. How do I fix this problem?

    When I click to open a photo it opens a black screen with a grey triangle, exclamation mark in the middle. How do I fix this problem?

    Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Desktop stuck at black screen with cursor in normal mode but boots fine in safe mode after updates.

    After running some updates the other night my laptop stopped loading the desktop and just gets stuck at a black screen with a cursor after I log in to the user account. The only thing I can do from there is do ctrl+alt+delete, then log off or restart.
    I can't open up task manager. I tried creating another account in safe mode thinking there was an issue with the account but I still have the same issue. In event viewer I have two warnings one is
    event 6000 winlogon, The winlogon notification subscriber <GP Client> was unable to handle the notification event
    and event 4006, winlogon The windows logon process has failed to spawn a user application. Application name. Command line parameters: C:\Windows\system32\userinint.exe.
    As well as error event id 1003, CertificateServicesClient Certificate Services Client failed to invoke the Providers in response to event 512. Error code 2147956401
    and error 1001, certificate services client. certificate services client failed to load provider pautoenr.dll. error code 14001. I checked the registry and the path points to the right directory for userinit. I have tried running
    System Repair but no errors were found, and I ran sfc /scannow and no errors were found either. The computer did not have System Restore enabled and I do not want to restore to factory settings. I also ran registry mechanic and it found no errors. Any suggestions
    besides restoring to factory settings?

    Hi,
    We may try to reinstall Windows 7 Service Pack 1 for a test.
    In addition, let us perform the following steps.
    1. Click Start, Run, type lusrmgr.msc then ENTER.
    2. Select Groups in the left pane.
    3. Double-click Users in the right pane.
    4. Click Add, and then click Locations. Scroll to the top of the Locations dialog and select the local computer name, then click OK.
    5. In the Enter the object names to select field, type Interactive; Authenticated Users (separated by a semi-colon). Then click OK.
    6. Restart the computer.
    Or we can run the following commands from a command prompt:
    Net localgroup Users Interactive /add 
    Net localgroup Users "Authenticated Users" /add
    Kim Zhou
    TechNet Community Support

  • Black screen with underscore after updating ubuntu on Lenovo G560

    hello everybody, I'm new here. I looked for this problem online during the past few days but I haven't found a solution. I have a Lenovo G560 and I divided my hard drive into two partition, I installed Ubuntu on C:\ and Windows on D:\ and I haven't had any problem, but after updating ubuntu to version 14 my computer couldn't boot anymore. the bios loads and I see the Lenovo icon but then I just get a black screen with an underscore (not a blinking underscore), I tried booting from a bootable USB stick but the same thing happened (I put it as the first device to boot from in BIOS settings). can anyone please tell me what are my other options ? what should I try now ? thanks in advance and have a good day !

    Hi s, and welcome to Apple Discussions.
    Try this:
    Hold down the Option+Command (Apple)PR keys, boot/restart your MBP while continuing to hold down those four keys, and after you hear the startup chime for the second time, release the keys. That should reset your PRAM and resolve the issue.
    If the issue persists, while you're booted into Open Firmware, just after the prompt, type in:
    reset-nvram
    then press return, then type in:
    reset-all
    and press return. This should restart your MBP and it should go back to starting normally.

  • I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

    I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • When i try to turn ipod touch on it stays on the black screen with the apple and nothing else happens. whats wrong?

    okay so just as i was typing this the problem resolved itself, but when i went to charge my ipod i noticed ot stayed on the black screen with the apple for a good 10 minutes, so i pressed buttons furiously (!!) and the screen went white and then back on to the screen with apple again. this contiinued for a good 4 tries then eventually went on to my lock screen (which is the very beautiful dom howard not that you know who that is and i dont even know any of you so i dont know why im typing all of this out but i really enjoy typing it's an incredibly exciting past time of mine but unfortunately i havent used capital letters) just wondering if it will happen again

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Black screen with blinking cursor when installing win 7/vista x64 osx 10.6

    i am using bootcamp 3 to install windows 7/vista x64 on osx 10.6.6.when i select install mac reboots and then all i get is a black screen with white cursor.
    i have created a 20gb partition with disk utility in fat32 and i had installed windows successfully when i was on osx 10.5.i tried erasing and creating new partition but same problem.
    any help will be appreciated

    This solved it for me!
    From another forum:
    "1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
    2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
    3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
    5. Click Repair your computer.
    6. Click the operating system that you want to repair, and then click Next.
    7.In the System Recovery Options dialog box, click Command Prompt.
    Type (these commands are safe)
    Code: Bootrec.exe /FixMbr
    Code: Bootrec.exe /FixBoot
    Code: Bootrec.exe /RebuildBcd
    *Press ENTER after each command.*
    *Restart your computer.* "

  • Windows Server 2008 black screen with mouse *PLEASE HELP*

    Hello fellow techs,
    I have been tearing my hair out for the past 12hrs on this issue.
    About 3 weeks ago, one of our clients reported that they were experiencing
    issues on the network so one of the staff went into the server room and noticed
    the screen was black with only the cursor. As they couldn't reboot, they
    decided to hold the power button to power it off. When they powered it back
    up, it went passed the windows loading
    splash screen, and again the screen is black with
    the mouse pointer in the center of the screen.
    I am diagnosing the server and find that at the black screen, I’m able to move
    the cursor and beyond that nothing happened. I started in safe mode with the
    exact same results.
    I have been trying many different solutions from posts that I have found in
    Google but no change.
    From other machines you can type \\servername in
    the run box and see the shared folders, as well as ping it.
    This is a very urgent request as I need to have the Server back up and running
    by tomorrow.
    I am quiet willing to pay for phone support with anyone that can assist as soon
    as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
    PLEASE HELP!

    Hi,
    I agree with sm, you should give us more details. Also you should use sfc  /scannow
    command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
    Sfc
    http://technet.microsoft.com/en-us/library/ff950779.aspx
    Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
    The Windows Server black screen may be caused by them.
    In addition, there are similar questions, please refer to.
    Windows Server 2008 black screen
    http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
    Windows Server 2008 and the Black Screen of Waiting
    http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
    By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
    Windows Server 2008 black screen with only the mouse pointer showing
    http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
    Hope this helps.
    Best regards,
    Justin Gu

  • C655D 5210 tosiba black screen with mouse pointer

    I have only had this computer for 8 months. One day I turned it on, and windows kept restarting. After a few trouble shooting steps off the internet, I decided to reinstall windows 7 and lose my data and start all over. The first time it could not repair the computer and asked me to send the information to microsoft. Cannot boot in safe mode, I can get to the setup utility screen. This is a new Windows 7 cd. After several tries, it installed and said it had to restart, (this may happen several times) it only restarted once, then a black screen with a cursor. When I try to boot from the cd, the windows logo apppears, then a black screen with mouse pointer again. Toshiba is no help at all. This is my third Toshiba laptop. The first one did the same thing. But it was out of warranty, the amount they wanted to charge us, i just got another one. My mom's Toshiba just died with no real reason, the old one is in the garbage, and this one is only 8 months old. Toshiba would like us to send the computer in, pay for shipping, wait for 3 weeks, pay to ship it back to us, with a promise that it may not work.
    Please help
    here is the error message when trying to install windows 7
    file:\Boot\BCD
    Statu" 0xc000000f
    An error occured while attempting to read the boot configuration.

    Hi, last try is to install os manually,  a clean os Install (way to go here) 
    regards KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Maybe you are looking for

  • After OATM in 11.5.10.2

    Hi, After OATM 2 objects are left in FNDD tablespace. OWNER TABLE_NAME COLUMN_NAME APPLSYS AQ$WF_NOTIFICATION_OUT_BAK "USER_DATA"."HEADER"."PROPERTIES" APPLSYS AQ$WF_NOTIFICATION_OUT_BAK "USER_DATA"."TEXT_LOB" APPLSYS AQ$WF_NOTIFICATION_OUT_BAK1 "USE

  • Output for billing

    My user require that the output ofor the billing doc has to be triggered automatically. We have 2 printers , one is for billing single invoice and the other one is for billng invoice list. Can any one suggest me how to set up both for a customer so t

  • Probleme Mail server on OCS

    Hi, Im new at OCS, and i hope to know how lanching and configuring the ocs mail server. thx for your respons.

  • Labeling images over a network in Bridge

    I was thinking of using Adobe Brige CS5 over a network. Mainly it would be just to see images all stored in one location on a server. Most people only have reading rights to this server. So when they open Bridge on their computer they can only view t

  • Integrating ESB and BPEL to transmit the data

    Hi, We are integrating few sub systems like when a new employee as joined the organization we will enter those information in a HRMS system where those information will be transmitted to the ESB server where ESB should carry this message and pass it