Black screen with Google street view
No problems using IE-9.
Als no problem when firefox is started up in save mode.
Excluding all add-ons does not solve the problem.
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
See also:
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
Similar Messages
-
MY COMPUTER ONLY SHOWS A BLACK SCREEN, WITH ONLY THE POP UP SHOWING .....VIEW AND TRACK YOUR DOWNLOADS
Hi,
First plaese unplug any external device (except the mouse and keyboard), then hold on the power button, perform a cold reboot, what is the result?
If doesn't work, please press F8 (or other button, depend on your PC model) boot your compute into recovery console.
You can restore your system to a previous point or perform a startup repair, please refer to the following link:
What to do if Windows won't start correctly
http://windows.microsoft.com/en-in/windows-vista/what-to-do-if-windows-wont-start-correctly
Yolanda Zhu
TechNet Community Support -
Recently downloaded Live Street View to replace Google Street View lost in IOS6 "upgrade." It's OK, but images are 3" & don't zoom. Today I received a prompt to upgrade Live Street View, but it is preceded by 35 pages of TOA from Apple. I'm suspicious of trusting Apple (again) and agreeing to their terms. Current version of Live Street View isn't ideal, but its still better than what I was left with pre-IOS6. Has anyone done recent upgrade to Live Street View and is it any better than before?
I suspect you have the debug version of Flash Player installed. Can you visit this page to verify that debug = yes?
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_Flash_Play er_version_type_and_capabilities__Flash_developers_only_ -
Black screen with X in my viewer
I'm a newbie to FCP, I am getting a black screen with a white X in my viewer. I have audio but can't see to edit. I can pull the clip from the browser into the timeline and it will play on the canvas. What did I do wrong?
pressing 'w' will cycle thru the modes. Image, Image+Wireframe, Wireframe...
Patrick -
Black screen with exclamation point when trying to view photos
In iphoto 8, when I try to make some pics bigger by clicking on it, the screen changes to a black screen with a white exclamation point in it. This does not happen to all the photos, only some of them. Can someone tell me what happened and how do I fix it?
Thanks!Welcome to the Apple Discussions.
The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD -
Cannot move Google Street View screen
Firefox 3.6.24 will not allow me to move around in Google Street View. I cannot pan around from a fixed position as before. It works on my iPad2
Mac OS X 10.6Streetview probably works for most people.
Try using Internet Explorer IE does it work ?
If it works in IE but not Firefox it could be a Firefox or FlashPlayer issue.
* As a workaround try the Streetview Lite Version https://support.google.com/maps/answer/3032024
** '''Does that help ?'''
* Send Google feedback https://support.google.com/maps/answer/3094045
*See if their forum may help you https://productforums.google.com/forum/#!forum/maps
** If you do find a forum thread where this problem is reported on Firefox 36 but not on IE maybe you could provide the link.
If it is Firefox only we may need to file a bug. If other people see this problem.
Try this test please (other readers of the thread please also try this)
( <sup>STR from bug 1027103: & bug 1034593 #c20 </sup> )
# https://www.google.fr/maps/@45.522217,-122.681801,3a,90y,19h,90t/data=!3m4!1e1!3m2!1sNAhWh8lID_xtbpkI5COi_w!2e0!6m1!1e1
# Double Click on the map on the bottom left.
All it is doing is opening a map in streetview, but at least we all know we are testing the same page. -
This does not happen in other browsers and it happens on a variety of computers I have access to and would seem to be a common problem but I can find no identical cases in my searches of
Firefox , Facebook or windows help or Google search. My home machine is only a P2 with WINXPCORP but works fine and I have done all updates but still have this continuing problem every time I try to use Firefox
to access Facebook chat but it does not happen with IE or chrome
The response to clicking on chat button or friend chat is a black screen with small center square box with blue title bar that says
'' VIEW IMAGE FULL SCREEN - (42) FACEBOOK X""
center of box is ""! "" mark in yellow triangle and wording
"" CANNOT LOAD IMAGES ''' OK
clicking on OK returns to facebook page but no chat opens.
Some times |VERY RARLEY if as the page loades you click on
chat button with 1/2 second of it appearing chat will open.Hi,
Please also see [https://support.mozilla.org/en-US/kb/Problems%20using%20Facebook%20in%20Firefox this.] -
Desktop stuck at black screen with cursor in normal mode but boots fine in safe mode after updates.
After running some updates the other night my laptop stopped loading the desktop and just gets stuck at a black screen with a cursor after I log in to the user account. The only thing I can do from there is do ctrl+alt+delete, then log off or restart.
I can't open up task manager. I tried creating another account in safe mode thinking there was an issue with the account but I still have the same issue. In event viewer I have two warnings one is
event 6000 winlogon, The winlogon notification subscriber <GP Client> was unable to handle the notification event
and event 4006, winlogon The windows logon process has failed to spawn a user application. Application name. Command line parameters: C:\Windows\system32\userinint.exe.
As well as error event id 1003, CertificateServicesClient Certificate Services Client failed to invoke the Providers in response to event 512. Error code 2147956401
and error 1001, certificate services client. certificate services client failed to load provider pautoenr.dll. error code 14001. I checked the registry and the path points to the right directory for userinit. I have tried running
System Repair but no errors were found, and I ran sfc /scannow and no errors were found either. The computer did not have System Restore enabled and I do not want to restore to factory settings. I also ran registry mechanic and it found no errors. Any suggestions
besides restoring to factory settings?Hi,
We may try to reinstall Windows 7 Service Pack 1 for a test.
In addition, let us perform the following steps.
1. Click Start, Run, type lusrmgr.msc then ENTER.
2. Select Groups in the left pane.
3. Double-click Users in the right pane.
4. Click Add, and then click Locations. Scroll to the top of the Locations dialog and select the local computer name, then click OK.
5. In the Enter the object names to select field, type Interactive; Authenticated Users (separated by a semi-colon). Then click OK.
6. Restart the computer.
Or we can run the following commands from a command prompt:
Net localgroup Users Interactive /add
Net localgroup Users "Authenticated Users" /add
Kim Zhou
TechNet Community Support -
Windows Server 2008 black screen with mouse *PLEASE HELP*
Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu -
Xorg-server 1.6 - black screen with mouse cursor
Hi
First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
I added a new test user to my system without compiz and get the same.
I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
I googled this problem and was searching similar things in this froum, but I wasn't able to find something
Here are some files
xorg.conf (i know there are some bullshit things in it, but it was workig )
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
# Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
# FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/local/"
FontPath "/usr/lib/X11/fonts/misc/"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
FontPath "/usr/lib/X11/fonts/75dpi/"
FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2" # PS/2 Mouse
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Eizo"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 24.8-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-75
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "GeForce4"
# Driver "nv"
Driver "nvidia"
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "GeForce4"
Monitor "Eizo"
DefaultDepth 24
Option "AddARGBGLXVisuals" "true"
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Xorg.0.log
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Eizo"
(**) | |-->Device "GeForce4"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 03@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
(--) NVIDIA(0): EIZO L578 (DFP-0)
(--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
(--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1280x1024"
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): "800x600"
(II) NVIDIA(0): "640x480"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GART.
(II) NVIDIA(0): Setting mode "1280x1024"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
(**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
(**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
(II) saa7134 IR (LifeView FlyVIDEO30: Found keys
(II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
(II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
Last edited by MueLLe (2009-04-15 21:35:42)I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?
-
Server 2008 crash - black screen with mouse cursor
dell poweredge 2950 with Perc 5/I RAID, ESXi 4.1 host, Windows Server 2008 R2 SP1 VM
After swapping out a failed raid5 drive this vm began displaying inpage operation error popups while checking folder permissions. event viewer errors:
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2.
The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:.
chkdsk /r run from the win2k8r2sp1 install dvd command line resulted in more corrections than i was able to screenshot:
After this the server would only boot to black screen with mouse cursor. same black screen result in safe mode or directory services restore mode. sfc /scannow, startrep, and registry repair from the folder contents @ c:\windows\system32\config\regback
have been attempted with no improvement. I am still able to access the filesystem contents using the command line from the win2k8r2sp1 installation DVD - user + registry files copied over to another drive without problem and i was able to load
the registry hive on another system. This server was doing dns, domain controller and certification authority but the only important item is getting the CA back somehow. Any suggestions are welcome.Hi,
According the information you have provided, the file system is broken.
After the repair, do chkdsk /r and sfc /scannow give any warning or error?
If yes, it means that the file system and system file are not repaired. Please post the error or warning here. It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support -
Vista Home Premium: Following install, black screen with mouse cursor
I have tried installing with Boot Camp (v2.0) twice now with the same result.
After the install is complete, the mac reboots into windows. I should see the Vista welcome screen but instead I get the black screen with a mouse cursor. The mouse is functional but clearly not much use!
A subsequent reboot brings up the options for restarting following an unclean shutdown of windows. Running in safe mode, the restart hangs. The last dll loaded was crcdisk.
I am running an OEM version - once activated (assuming I ever get that far) - the installation will be locked to the mac... which is fine.
Googling the problem reveals some early Vista beta issues with graphics that caused a similar problem. Does Vista have an issue with the 8800GT that is fitted in my Mac?
Any help/ideas/suggestions/fixes much appreciated. Rather stumped.
I would load up XP Pro but I dont have an installer with SP2 :/Well my problem turns out to be a bad disk. I added two seagate 7200.11 750GB drives. Once which was making ominous ticking sounds. Vista took an age to install and really, I should have caught on earlier.
When I got a bunch of disk i/o errors creating a Fusion VM of XP Pro I decided to remove the disk and to try the other unit.
Vista installed very rapidly indeed and worked. Yes worked.
Hurrah! Problem solved.
Time to see about replacing that disk... -
HELP: Bootcamp wont start up anymore.. ( Black screen with flashing cursor)
Today i tried to boot up my Windows VISTA partition with bootcamp and I always end up with a black screen with a flashing cursor. I already tried several times but still no luck..
Strange thing is I can still boot up my Windows Vista partition in Parallels on Mac... But after u reboot and try this with bootcamp again the black screen with the flashing cursor.
I search on the internet for a fixes or solution but no luck, and i don't want to reinstall every thing on my windows partition again..
also tried the cmdalt+PR thing on startup without any luck and i have no clue what this problem is causing.. i only remember installing the last updates for my mac with the new App store feature but don't know if that could cased any problems.. it looks like a firmware problem or something to be honest i really don't know..
Can someone help me? or figure this out? any fix for this?
thx
Message was edited by: MattiesharkEver Google (or Bing)?
http://windowsteamblog.com/windows/archive/b/windowsvista/archive/2006/12/05/win dows-recovery-environment.aspx
http://www.informationweek.com/news/windows/showArticle.jhtml;?articleID=2000003 29
http://www.bing.com/search?q=Vista+recovery
In brief, did you ever think to boot from Vista DVD?
And you might want to look into programs to backup / clone / and provide system restore capability. -
Black screen with no cursor after installing Windows 7 through Boot Camp on Retina MBP
Hey all.
So, I have a Retina Macbook Pro (15", late 2013). A couple weeks ago I tried to install Windows 7 on it through Boot Camp.
After some struggles with trying to repair my disk with Disk Utility and having to recover the system etc, I finally managed to actually install Windows 7. However, after the installing was ready, when Windows was supposed to boot, it just gave me a black screen with no cursor. I really had no idea what to do there, I tried to do some research from google but only found answers regarding a black screen with a cursor DURING the installation. However, I managed to launch Windows in safe mode. I deleted graphics drivers that bootcamp assistant had installed, and then it worked and I got to boot Windows succesfully.
However, as probably all of you know, you can't do much without those drivers. Games, videos, overall performance of the system is kinda horrible.
After that, I wiped the whole system, Mac and Windows, and reinstalled Mac. During the Windows installation I was running on Mavericks, now I've got Yosemite. I might try installing Windows again next week, does anyone have any clue why the black screen happened? What could I have done wrong? And the most important question in my mind, in case that happens, is there any way to install the graphics drivers manually from somewhere? After I uninstalled 'em earlier, I tried to find them manually, but couldn't find any.
Thanks!Yes, that's exactly what was the problem in the first place, I had a USB3 device. Switched to USB2 device and the installation progress started flawlessly.
The later part I didn't quite get. What are those installation methods, how could they cause the problem there? I had no problems during the installation, but after installation when launching Windows I had the black screen, and that I suppose was GPU drivers problem if I'm not totally wrong? I could hear the basic Windows system beeps etc when I tried clicking everywhere (had no cursor either, just clicking randomly), so the system was running there, but just didn't draw the picture at all. -
Unable to restore iTouch, stuck on black screen with white apple
Hello to any and all that can offer me assistance:
I have an iPod Touch. I have restored it more than once. It will show the screen with the USB cord and the iTunes logo. After the restoration process the computer screen will say that the restoration was completed and my iTouch will turn back on to be recognized by iTunes in 10 seconds. That never happens. Instead I get the black screen with the white apple. It will stay on then flick off after about 20 seconds repeatedly.
I have tried uninstalling all Apple files and re-downlading them. I have tried letting it die then charging it. I was getting error 1611 so I disabled my security software and did the restore again. I have deleted and readded the file in the folder for iPod software updates. I have held the shift key when pressing restore in iTunes and selected the newly downloaded iOS/firmware. I unplugged it from the front USB port on my tower to a slot on the back. I unplugged and restarted my pc with nothing plugged into the USB ports other than the iTouch cord, my mouse and keyboard.
All have failed. Once - out of no where - I thought that I had gotten lucky because it was back to factory defaults. I added my apps and music to it. Once I unplugged it from my PC within minutes it died and started doing the flicker on and off again.
What else can I try? I am frustrated and running out of ways to google and review other discussions on the Apple site on how to repair it. I don't know what generation it is. I've owned it for maybe 2 years. It's a 32g iTouch.
Please help if you can! :-)
Thx,
HunyBAre you referring to when i hold down the circle button until it restarts? I've tried that. I always get back to the screen with the USB cord pointing toward the iTunes logo. While still holding the button i plug it in to the USB cord. I do the restoration....it shows a little icon that are small lines like sunrays that light up like it;s about to restart.....then it gots back to the flickering. ;-(
Maybe you are looking for
-
Hi Guys, We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue. We have tried testing in two instances ,Initially i
-
WRV54G - Problems connecting wirelessly with Windows 7
I'm unable to connect wirelessly to router using a HP laptop with windows 7. I have 2 xp laptops that connect without a problem. The HP laptop finds network, but once I click on network to connect, it does not ask for the security code therefore I ca
-
Settling of rebate agreement : Accrual not reversed
Hi experts, I've quite a strange problem when i make a final settlement of a rebate agreement : The accrual are not reversed but are counted twice. I.e. I've an accrual of 100u20AC for a rebate agreement, when i settle it, it didn't go to 0 but to 20
-
My computer and Itunes account is under my name. My wife has an ipod, and simply wants to copy over some of the music, but I tunes says her Ipod isn't "authorized". I see how to authorize a computer for itunes, and in fact de-authorized, then reaut
-
Re: Since updating to JellyBean, my playlists keep disappearing!
Hello Ann, I have a razr maxx with jb and am experiencing this problem as well. I also saw a s3 user complaining of it too. Haven't noticed problems happening with sd mount/unmount, but i had a playlist of songs i had purchased on itunes and 1 song p