Black Screen with Radeon 6970 bios, but not the stock 6950.

My previous motherboard was the Gigabyte GA-880GMA-UD2H and an Athlon II x4. It ran the Radeon 6950 unlocked as a 6970 on this bios for 3 years: imgur(dot)COM /oXBNtTk
I recently got the G3258, and the B85M GAMING MSI motherboard on bios 10.2. It booted a black screen until I switched the bios to stock. (2 bios options, w/ physical switch) My question is how do I fix this, is there a bios option to disable? Why is this happening..
Also of note, the windows 7 account control popup security check, and logging after password input will show a black screen for about 1 second. I find this strange. (stock bios obviously)

So you updated under Windows with what tool? Most likely the ME firmware wasn't updated this way. Try reupdating it properly:
>>Use the MSI HQ Forum USB flasher<<
     A.) Download the attached archive (A70.rar) and place it on your desktop. Do not decompress.
     B.) Download and install the Forum flash tool.
     C.) Insert your FAT32 formatted usb stick.
     D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
     E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
     F.) Boot to the USB 
     G.) Now follow the directions and let the tool flash
     H.) After flashing reinstall ME drivers in Windows:  http://download.msi.com/dvr_exe/intel_amt90_mb.zip

Similar Messages

  • My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

    I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
    I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
    What is wrong and what should I do?

    Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
    The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
    Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

  • I repaired a cracked iphone 5c screen now I have a black screen with a vertical blue line on the left hand side of the screen. please help!!

    Hi all,
    Please help, I repaired an iphone 5c and have now tried two different lcd screens on it but all I get is a black screen or a black screen with a vertical blue line on the left hand side of the screen. I definitely have the cables connected properly etc and before I repaired it the phone had a cracked screen and there was a picture on it.
    I have tried hard reset and nothing. I have tried connecting to iTunes but it asks me to confirm on the iPhone which I can't do as there is nothing on the display.  I have tried randomly pressing all over the screen but it doesn't work. So I can't even try restoring it on iTunes.
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.

    purplesunshine3 wrote:
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.
    Since you were successful the last two times, I'm sure you will figure it out.

  • Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398

  • When I click on almost any picture, in any album, to enlarge it, the pic starts to enlarge and then all I get is a black screen with a large exclamation point in the center.  What have I done to my iPhoto program, and how do I fix it?

    Recently, whenever I click on almost any of my pictures, in any album, in order to enlarge that photo, it starts to enlarge but then,
    very quickly I get a black screen with a large white exclamation mark in the middle.  And no full sized photo. Boo!
    What did I do to my iPhoto program, and how can I fix it?
    Thanks for any suggestions.
    Mike H.

    I'm sorry.  Too old to understand this stuff.  I'm sure this seems real stupid to you.  But I have no idea how one
    would "right click on the Original iPhoto Library" (I know, I know, 'as stated").
    Do I right click on the symbol in the dock??  Or open it first and then, . .  I can't find a way to right click on the word iPhoto in the top bar.
    Or should I open the program you had me download.  There I can find something called "original iPhoto library".
    When I "right click" on that I get some options.  None of them are "original folders".  There's "reveal library in finder", and "dupilicate library and "sort libraries".  I have no idea if any of these are what you want, or if any of these might change something.
    When I clicked on "reveal library in finder" earlier on it showed me the copy of the photo library that I made a while ago, sitting right where I know it is on my desktop.  And if I click on that symbol it shows me all the pictures again.  Just like in my regular iPhoto files - all the thumbs are there, but most can't be opened to full sized.
    Are we making progress here?  I'm sure this is frustrating to you.  This is just pictures of family.  Even the thumbs are nice to look at.  But this is nothing critical - like work related or anything.
    Thanks.
    Mike
    t

  • 2nd gen ipod shuffle will charge with one computer (vista) but not the other computer (windows 8).  Please help!

    My 2nd gen ipod shuffle will charge on my old vitsta computer but not my new windows 8 computer. Does anyone know why that might be? The new computer recognizes the ipod and I can see everything on it, change settings, etc. it just won't charge. Is there a reason as to why this should be happening?

    Just bought a refurbished 2nd generation ipod
    shuffle. I am running the very latest version of OS X
    and iTunes on an iBook G3 600 mhz with the slower USB
    ports, not 2.0 ports. The ipod mounts and is
    regognized by itunes, but I cannot seem to register
    the ipod from itunes, it always has an error message
    when I submit to register (all forms are filled out
    correctly). The registration window in iTunes shows
    that this ipod is formatted for Windows (from the
    previous owner I assume) and may be causing my
    problems?
    No. ALL shuffles are FAT32 format.
    The other problem is that it will not sync and
    transfer any music from itunes library. I am trying
    to transfer simple mp3 files that should be compliant
    with the ipod specs. No luck even after multiple
    restarts on the ipod. Any help would be appreciated!
    Thank you.
    Try this: http://docs.info.apple.com/article.html?artnum=305204

  • Can Vid Chat with one computer login, but not the other--HELP!!!

    When I login to my computer using my account, I am unable to video chat. However, when I login using my daughter's login, I can video chat. What gives? As far as I can see the settings are all the same. I can get as far as sending an invitation to video chat with somebody, but then it just churns while waiting for the other person to accept the invitation. In other words, they accept, but the last connection step doesn't happen. It happens when I'm logged in under my daughter's computer login, but not mine. Also, when I get an invitation to video chat, the same thing happens. I accept and then it just sits and churns waiting for that last step. I have a .Mac account and she has an AIM account, but it doesn't help when I switch to my AIM account. Any help would be great. Thanks in advance.

    Go to Users/(your account)/Library/Preferences and delete com.apple.ichat.AIM.plist and restart iChat.
    10:15 PM Friday; January 11, 2008

  • How do you close the stock chart but not the stock widget ?

    I have clicked on a stock and get the stock chart but now I don't want the chart, just the stock price widget.
    The prices were originally there without the chart and that's the way I would like it.
    Thanks for any advice.
    iMac Mountain Lion-Dashboard

    Hi, Thanks for the quick reply !
    No, sorry to say, cycling through those 3 dots does not close the chart.
    If I have to, I guess I can delete and then reinstall the widget.
    Seems like there must be a way to close the chart only....

  • Hello iphone users, I have a situation here.. I have an Iphone 4G that 2 days ago displayed the black screen with de apple logo, ive done the recovery mode over and over in diferente pcs(windoes, mac) and none seem to aknowledge the device, what to do???

    hello everyone, as I have stated above, I have an Iphone 4G realtively new, just 3 months of use. I've never dropped it, nor got it wet. The problem is that the screen just one day went black and displays the apple logo, when I do the recovery mode everyway possible the screen shows the itunes link but the pc doesn't acknowledge it.. I've tried on many pcs (windows and mac) and none respond because the device is not shown on itunes it just says "driver not found"
    please what to do???

    Call Apple Customer Relations - 1-800-275-2273.  Ask politely & firmly that you want to be transferred to Customer Relations.  Tell them exactly what you stated in your post.
    GOOD LUCK!
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.  

  • VS 2012 shows one project in solution with source control hieroglyphs but not the other

    I have a solution that contains a database project, and an integration services project. The solution was add to a git repo that's based on a TFS 2013 team project. Team project was created, connected to with VS, synced, and the solution created within
    that (using the new button after connecting from Team Explorer). My issue now is that the database project shows files that are checked-in, modified locally and not committed, etc - but the SSIS project does not. I still have the option to commit changes to
    either project, but there's no visual queues on the one when there are changes. Any way to fix this?

    Hi,
    Thanks for your feedback.
    We’re continually updating the Team Foundation Server with performance, reliability, and feature enhancements. You can help us prioritize this by submitting feedbacks at
    http://connect.microsoft.com/visualstudio
    and suggestions at http://visualstudio.uservoice.com/forums/121579-visual-studio/category/30925-team-foundation-server.
    Maybe you can consider submit a feedback here. And please post back the link once you finished it, I will vote it for you.<o:p></o:p>
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Panasonic TV. Apple TV works with one HDMI input but not the other.

    I have the latest version of Apple Tv and an older Panasonic TX32LXD60 Tv. The TV has two HDMI inputs. Apple TV works perfectly on HDMI1, but shows nothing on HDMI2. I am using exactly the same cable. HDMI2 works fine with my DVD player. Can anyone explain how I can get HDMI2 to accept Apple TV?

    Update - Panasonic support wrote the following:
    "Thank you for your e-mail enquiry regarding your Panasonic product.
    I have discussed your issue with our head office AV technica ldept & they have confirmed that as the DVD player works on the HDMI input there is nothig wrong with the TV. It may be there is an incompatability with the apple TV interface & the TV. Nothing can be done to solve this as there would be not adjustments you could make to the HDMI inputs on the TV."
    so according to them its not their product!
    I have solved my problem by getting a Samsung TV - brilliant picture and no technical problems (so far!!)

  • I just got the 7.0.3 upgrade and my phone is locked on a black screen with a blue itunes circle and the end of a usb cord on it. i assumed this meant sync with itunes which i tried and pressed reset and itunes says theres an error how do i fix this

    my iphone is locked and i cant get itunes to connect with it. how do i fix it or do i need to take it to at&t. this all started with getting the new upgrade.

    Hi mfowens10,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    You might need to use recovery mode if:
    You can't update or restore because iTunes doesn't recognize your device or says it's "in recovery mode".
    The Apple logo remains onscreen for several minutes with no progress bar.
    The Connect to iTunes screen appears.
    Cheers,
    - Judy

  • I can sign into iTunes with one user id, but not the other

    I am trying to update all apps.  I tried to sign in under my main id, and it says it cannot connect.  No error code.  I tried under my other id and it worked great.  What would cause my main id to not work?  Any suggestions would be appreciated.  I hope it's something easy that my brain just doesn't want to see.

    Go to Users/(your account)/Library/Preferences and delete com.apple.ichat.AIM.plist and restart iChat.
    10:15 PM Friday; January 11, 2008

  • My Stocks widget is not working.  The graph part works, but not the stock value section.

    My Stock widget is not working.  No prices are displayed.  Fix?

    If it is the Apple provided widget, Yahoo! Finance, there have been a rash of problems lately - see the More Like This box at the top right.
    1. If you have any mutual funds loaded, try removing them.
    2. Try opening a 2nd copy of the widget. That has worked for me a couple of times.
    3. If you have a backup, try restoring the widget. It is normally in the hard drive/Library. It might be in your user folder/Libary also. See below on how to access your user library.
    4. Try removing the com.apple.dashboard.plist in your user folder.
    You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences/com.apple.dashboard.plist.  Move the .plist to your desktop.
    Log out/in and test. If it works okay, delete the plist(s) from the desktop.
    If the same, return the .plist(s) to where you got them from, overwriting the newer ones.
    If you prefer to make your user library permanently visible, use the Terminal command found below.
    Show User Library
    You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

  • Get a black screen with a colored border saying that mozilla is not responding. Any help would be appreciated.

    Start firefox and get to homepage . When proceeding to another link or page firefox stops responding and I get a black screen with a colored border stating at the top of the page that mozilla is not reponding. Try to go back to home page and mozilla shuts down. Any help would be appreciated. Prefer to use firefox over internet explorer in which case the problem is not duplicated. IE9 works fine. Long time firefox user and hope to continue to be. Thanks
    Ted

    I created an account just to say that firefox is not what it used to be and I'm very disappointed in it and it's developers. I've been with firefox since the day of it's launch. Every new version after firefox 2 has been a let down--- what's the point when I get the same type of ridiculous crashes and freezes? What really annoys me is when I click "new" to create a new message to send within hotmail and it freezes for about 30 seconds to a minute. This happens every time without fail! I've updated a newer version 3 times and still the same thing. I've noticed that there have been more new releases, but I'm now convinced that it's only for show--- trying to stack up to Opera. Firefox copies off of Opera a lot, but it's too bad the developers can't copy it's stability. Who wants to have to read through forums looking for a fix... who has time for that? I don't want to, but I'm really considering leaving firefox for good. Please, get it together and FIX firefox.

Maybe you are looking for