Black screnn after driver install on 4650

Yesterday I have bought an MSI 4650 VGA card. When I tried to install the newest ATI catalyst (from ATI website) the Win XP crashed and rebooted. I succesfully installed the driver from the CD. However the screen goes black in the Windows (BIOS, Win XP logo fine). My PC: 5600+ X2 CPU, 680G MB with 1200 IGP, 2G DDR2.
I changed the first VGA card to PCIe in the BIOS.
Thank you in anticipation

>>Posting Guide<<

Similar Messages

270X Gaming - Black screen after driver install

I just recently purchased an MSI R9 270X Twin Frozr Gaming.
I physically installed the board and booted my PC. Windows started fine, albeit in VGA mode. I then proceeded to install the latest AMD drivers for the card (13.11 Beta). I made it through installation and then rebooted. When I rebooted, I got a blank, black screen after the "Starting Windows" screen. I was unable to boot windows, so I restored to last known configuration and tried again with different drivers (13.9) with the same result.
Does anyone know why windows hangs when it loads the display driver? Any help would be much appreciated.
Thanks
Windows 7 x64 SP1 (fresh install)
ASRock Z77 Extreme4
Core-i5 3570K (no overclock)
4x4GB Corsair Vengeance (stock profile)
Rosewill CAPSTONE 550W ([email protected])
MSI R9 270X Twin Frozr Gaming (S/N 602-V303-03SB1309077057)

Hi everyone. I just wanted to give you an update. It seems I have resolved the problem.
After attempting other fixes (fresh Windows install, MB BIOS update, etc), flashing the BIOS of the video card fixed the problem. I used the BIOS version
015.040.000.000.002887. I believe the BIOS the card shipped with is 015.039.000.000.002887. Anyway, there are no problems now. I was able to install Catalyst 13.11 Beta 9.5 with no problems and no black screens.
I got the BIOS and ATIWinflash from TechPowerUp. I'd post links, but I am too new to the board.
Thanks guys.

MBA 2012 Windows 8.1 Intel HD4000 - Black Screen after driver install.

Hi to all. I'm tried to install Windows 8.1 to my macbook air 13 2012. Everytime when I try to install drivers for HD4000 screen turns black, and stops responding. I'm tried different drivers - from bootcamp, from intel.com, from lenovo, from windows update, but all of them makes screen black, also I'm tried different version, but it still don't work.
Anybody have solution or some ideas? Thanks.
p.s. Sorry for my bad English.

Probabily the best solution but I installed this OS-crap 2 times already! And I think I am not supposed to solve HP/MS problems since I paid for this.

[Solved] Amilo XI 2550 - Black screen after fresh install

Dear archlinux users,
I have been reading the archlinux wiki and forums since I started using arch several years ago. It was always possible to solve the problems I ran into by consulting these webpages, therefore a big thanks to the community for the provided help.
Two weeks ago I installed arch on a Fujitsu Siemens Amilo XI 2550. The first problem I ran into was that booting the live-cd resulted in a black screen and I could not even start with installing arch. This problem was solved with the kernel parameter 'nomodeset'.
The first boot of the freshly installed arch also resulted in a black screen after the GRUB menu which was perfectly displayed. After some searching (here and here and ...) I plugged in an external monitor and it showed the login screen. I then installed KDE because I thaught the problem might not show up with X and KDE running. After the login to KDE I realized that the brightness of the laptop display is nearly black but not totally. It seems as if the brightness is at a very low level, but brightness cannot be controlled with the Fn+F8 or Fn+F9 commands. But I see a OSD that indicates that the controls are used but without effect. So at the moment it is only possible to work on the laptop with another display connected to it.
Maybe of use:
ls /sys/class/backlight/
acpi_video0
radeon_bl0
less /sys/class/backlight/acpi_video0/bl_power
0
less /sys/class/backlight/acpi_video0/actual_brightness
7
less /sys/class/backlight/acpi_video0/brightness
7
less /sys/class/backlight/acpi_video0/max_brightness
7
less /sys/class/backlight/radeon_bl0/bl_power
0
less /sys/class/backlight/radeon_bl0/actual_brightness
255
less /sys/class/backlight/radeon_bl0/brightness
255
less /sys/class/backlight/radeon_bl0/max_brightness
255
dmesg | grep drm
[ 0.736559] [drm] Initialized drm 1.1.0 20060810
[ 0.743608] [drm] radeon kernel modesetting enabled.
[ 0.743678] fb: switching to radeondrmfb from VESA VGA
[ 0.744054] [drm] initializing kernel modesetting (RV630 0x1002:0x9583 0x1734:0x1107).
[ 0.744065] [drm] register mmio base: 0xCFEF0000
[ 0.744067] [drm] register mmio size: 65536
[ 0.744172] [drm] Detected VRAM RAM=256M, BAR=256M
[ 0.744174] [drm] RAM width 128bits DDR
[ 0.744257] [drm] radeon: 256M of VRAM memory ready
[ 0.744259] [drm] radeon: 512M of GTT memory ready.
[ 0.744275] [drm] Loading RV630 Microcode
[ 0.744345] [drm] Internal thermal controller without fan control
[ 0.744386] [drm] radeon: power management initialized
[ 0.744389] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.762830] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 0.762873] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.762874] [drm] Driver supports precise vblank timestamp query.
[ 0.762937] [drm] radeon: irq initialized.
[ 0.794780] [drm] ring test on 0 succeeded in 1 usecs
[ 0.795253] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.795942] [drm] radeon atom DIG backlight initialized
[ 0.795945] [drm] Radeon Display Connectors
[ 0.795947] [drm] Connector 0:
[ 0.795948] [drm] LVDS-1
[ 0.795950] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc
[ 0.795951] [drm] Encoders:
[ 0.795952] [drm] LCD1: INTERNAL_LVTM1
[ 0.795953] [drm] Connector 1:
[ 0.795954] [drm] DIN-1
[ 0.795955] [drm] Encoders:
[ 0.795956] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 0.795957] [drm] Connector 2:
[ 0.795958] [drm] HDMI-A-1
[ 0.795960] [drm] HPD1
[ 0.795961] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 0.795963] [drm] Encoders:
[ 0.795964] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 0.795965] [drm] Connector 3:
[ 0.795966] [drm] VGA-1
[ 0.795968] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 0.795969] [drm] Encoders:
[ 0.795970] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.278449] [drm] fb mappable at 0xD0141000
[ 1.278451] [drm] vram apper at 0xD0000000
[ 1.278453] [drm] size 9216000
[ 1.278454] [drm] fb depth is 24
[ 1.278455] [drm] pitch is 7680
[ 1.278527] fbcon: radeondrmfb (fb0) is primary device
[ 1.726069] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 1.770030] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
Until now and amongst others I tried the following things.
Using kernel parameters
video.use_native_backlight=1
video.use_native_backlight=0
acpi_osi=linux
acpi_backlight=vendor
and others I just cannot remember.
Masking backlight
systemctl mask systemd-backlight@backlight:acpi_video0.service
systemctl mask systemd-backlight@backlight:radeon_bl0.service
Setting bl_power
echo 1 > /sys/class/backlight/acpi_video0/bl_power
echo 1 > /sys/class/backlight/radeon_bl0/bl_power
Nothing of the above was improving the situation.
Your help on the problem would be highly appreciated.
Best regards
mgs
Last edited by mgs (2014-10-27 10:15:11)

Hello Trilby,
thanks for the reply.
Trilby wrote:If nomodeset worked with the installation medium, why haven't you tried that for the same problem on your installed system?
The kernel parameter 'nomodeset' results in a working display but without X support, due to the fact that with 'nomodeset' there is no KMS support and therefore no X. But nevertheless I tried it and as expected X did not start.
Trilby wrote:Could you also post information about your graphics card and what drivers you've installed.
The graphics card is a Radeon HD 2700 and according to the above dmesg log it is recognized as RV 630. The radeon module is loaded via /etc/mkinitcpio.conf and xf86-video-ati (1:7.5.0-1) is installed.
I hope the provided information is what you asked for, thanks for your help.
Best regards
mgs

Signal Express Program Freezes After Driver Install

Hello,
I recently installed NI-XNET 1.4 on my machine and a few days later I went to run a signal express program that never had operational issue until after the driver install?
What could of happened to this program to cause this failure?
I have other SE programs that load effectively after the driver update but this particular one does not.
Any suggestions would be appreciated.
Tim

Hi smoothdurban! Thanks for posting!
I'd like to get a little more information from you to see if I can get your signal express programs back up and running. First, have you changed anything in any of those programs since you were last able to run run them? Also, have you changed any hardware in your computer recently? XNET and Signal Express exist basically independently of one another, which leads me to believe that the installation of XNET was not the issue. However, one step to take to verify that nothing was altered in Signal Express during the XNET install would be to repair the Signal Express installation.
On a Windows machine, you'll want to go to your control panel under your start menu, then navigate to either "Add or Remove Programs" or "Programs and Features" depending on what version of Windows you are running. You'll next want to navigate to National Instruments Software, then double-click. Navigate through the list to find NI LabVIEW SignalExpress, then click the repiar icon in the window. You will need the installation file you used previously to do this.
If this doesn't work, please let us know!
Ben N.
Applications Engineering
National Instruments
Ben N.
Applications Engineering
Certified LabVIEW Developer

MSI R9 270X Gaming 4G Black Screen of Death after driver install...

So I recently updated the drivers and AMD catalyst to the newest version. After doing that and restarting my pc, it will load to the Windows loading screen, then to the black screen of death. When I restart under last known good configuration, I can start windows, but I don't have the drivers installed. This is a fresh install, and no matter what I do, it ends in the same result. I've tried restoring the PC, and I can start windows again, but again. No drivers. I can't find an older version of the drivers that worked before. I'm just frustrated because I have 2 of the cards, and a quad display. But i can't use them... After researching, I found that this is a common issue, But I can't seem to fix it.

From your post in another thread I guess you tried 14.4 from MSI site. Use latest official AMD one (14.12) instead: http://support.amd.com/en-us/download/desktop?os=Windows%208.1%20-%2064

Getting black screen after trying installing windows 7 using bootcamp

I downloaded ISO for windows 7 ultimate 64 bit and after using boot camp and partitioning my hardware the computer re stared as expected but then i get the black screen saying "Press any key" and i think its becuase windows 7 can not boot up what can i do to fix it.
I also tried downloading different ISO versions but it didn't work.
I Have a mid 2012 mc book pro 13 inch

The hatter wrote:
A Mac Pro (not a notebook) should be 95% fine w/o. A notebook like MacBook Pro is not "Mac Pro" which are 65 lbs. So don't confuse us iwth Mac Pro and MacBook Pro.
On Mac Pro you have to pull all the other drives but the one you will install on - that means no external drives etc,
Sorry I don't get your post? And was it a reply to my or the OP?
Should be 95% fine w/o??? What does that mean?

MSI 2GB D5 X GTX660 GAMING desktop shows only background after driver instal

Hello all and thanks for reading,
[I'm not sure if I put the right product name down in the title but it's the mSI N660 GAMING 2GD5/OC video card]
After trying to instal the driver for my newly purchased video card the problem started. I've been trying to solve the following problem for days and at my wits end. Any help would be much appreciated!
What I've done is
-a clean install of Windows 7 Ultimate
-installed my motherboard driver from cd
-let Windows update get the first chunk of updates (around 100-150) which includes SP 1
-installed the driver for the MSI video card, trying several; MSI Graphics driver 320.49 from this site, the NVIDIA graphics driver from this site, (both suggested for my product + Windwows 7 32bit), getting the 334.89 driver from the NVIDIA site, or getting a NVIDIA driver through Windows Upgrade. All have the same result;
The driver installs and promps a system restart. After restarting, I get through the Bios, the Windows loading screen and proceed to my desktop. I see the background, but no icons, no toolbar on the bottom of my screen, just nothing exept my mouse's position. When I rightclick, the option to show icons and such is already ticked. When I press Control+als+del I get a bland black screen with no (visible) option of taking any action or starting a command prompt. I can't do much then except do a system recovery to an earlier point.
I've been trying to solve this for many a times with different approaches, but they all net the same result. I've not found a solution through various google searches, nor found a solution in the stickes on this forum, or a search. If I overlooked one, apologies.
If anybody can help me, you'd be a godsend and I'll praise your name for days!
Sincere regards, Thijs
I know a little about computers but am hardly an expert. Took me a while but I put together this list of my computer:
Windows 7 Ultimate, SP 1, 32 bit
Motherboard: ASUS/ASmobile P5 Motherboard P5B
Processor: Intel Core 2 Quad CPU Q8300 2.50GH 64 bit (times 4)
RAM: OCZ 2x2GB 1066-555 Reaper (a scan told me DDR2 DIMM PC2-6400)
Videocard: MSI N660 Gaming 2GD5/OC. A newly bought Twin FROZR.
Hard drives -- C:/ Western Digital WD Green WD10EADS 1TB 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive Bare Drive
D:/ Hitachi Deskstar T7K250 HDT722516DLAT80 160GB 7200rpm 133MBps Ultra ATA/133
E:/ Seagate Barracuda 3TB 7200RPM SATA 6Gbps 64MB Cache 3.5-inch Internal Hard Drive
CD/DVD station - Samsung DVD-ROM SD-616E ATA Device
Power: CoolerMaster RealPower M 520W ATX2 powersupply, I didn't see a line of 3 voltages etc mentioned on the sticker but this is the readout:
+3.3V +5V +12V1 +12V2 +12V3 -12V -5Vsb
25A 20A 19A 19A 19A 0.8A 3.5A
I hope this is sufficient
I never tried anything with overclocking so don't think there's much too mention regarding that.

Previous to installing the driver there was none on my system, due to the clean install (to my knowledge, that is...). I´ve got Driver Fusion now, if needed in the near future.
Bios (an area I am very new to):
According to system information, my bios runs a version dated 4/11/2009
According to a downloaded program, AIDA32, my bios uses: AMI system bios dated 11/04/2009 and vbios dated 06/02/2009.
This is what the manufacturer's site mentions about different versions for my type of motherboard:
http://www.asrock.com/mb/Intel/P5B-DE/?cat=Download&os=BIOS
--> I fear I don't know enough about these to know if this is horribly outdated, or not : )
Nearing 5 years is old, but according to some forums, not -too- old
S/N of the new videocard: 602 -v287-35sb1311067308
Regarding your last question, I hope the link above gave you the file. I'm not sure how to provide it otherwise.
You're a blessing man, thanks a lot!!

Thinkpad X61 screen not working after driver install?

Recently I decided to change my operating system on my Thinkpad X61 so I completly refreshed the system and installed Windows 7 . I finished the install and it seemed to boot properly . As I began to install my drivers via the Lenovo website it asked for a RESART. After restarting the PC it wouldnt show a screen . I've tried to connect to another output and that didnt work.
As for the motherboard theory I honestly dont think that is the problem because I've seen several people on several forums discuss the same problem and they've found a solution but I cant seem to get anyone to discuss what that solution was.
I am a student so I am in need of my computer so if someone could please help me as soon as possible.
Moderator note; moved to correct board

Are you really talking about X61? If so, this is the wrong forum, but regardless, here is what to do. Pull the battery out. Unplug the machine, and press the power button several times, holding it for 5 seconds the last time. Put the battery back and plug it in. Turn it on and try to boot into the BIOS. If the screen stays black, either the screen or the motherboard has died. If you can plug it into an external monitor and try again, you can tell which one it is.

Print Crash After Driver Install

I have found this problem already exists among other people in this forum but haven't found a solution that makes sense to me.
I installed a driver for a HP printer and since then everytime I try to print, from any application, it crashes. The problem seems to lie with my home printer as opposed to the printer i had to install the driver for. I have never installed software for my home printer it seemed to be part of the bundle with my iBook. I deleted all I could find with regard to the stuff i did install but to no good end. Its driving me mad now.
Any help, please.
Happy New Year
Olly

Hello Oliver,
When an application crashes when printing, sometimes it can be related to the permissions on certain files within your system. This can occur after an update, such as installing 10.4.8. The workaround can be to open Disk Utility and run Repair Disk Permissions.
I'm also guessing from your posting that you connect to two different HP printers. For the home printer, there are a number of provided drivers with OS X and it sounds like your model at home was one of those. It is possible that by adding the HP software for the other printer, it has impacted the files for the home printer. Usually running the Reset Printing System in the Printer Setup Utility resolves some of these problems, however the system provided drivers aren't removed and if they are damaged then you will still have the problem. Some fixes can be to download Fixamac's excellent Printer Setup Repair utility and to download the full Combo updater for the new OS from Apple.
Regards,
Paul

Broadcom-wl problems, iwlist scan is empty after driver install

I'm trying to follow this Wiki page for installing my wireless driver
http://wiki.archlinux.org/index.php/Broadcom_BCM4312
I have the card "14e4:4329 "Broadcom Corporation BCM43XG"", so i meet the requirements.
I downloaded files from http://www.broadcom.com/support/802.11/linux_sta.php, since the PKGBUILD requires internet access, which i dont have.
I untar'ed the files, made the wl.ko file and put it in /lib/modules/2.6.30-ARCH/kernel/drivers/net/wireless/
# depmod -a
# rmmod b43
# rmmod ssb
# modprobe lib80211_crypt_tkip
# modprobe wl
No problems. Now when i run iwconfig eth2 is recognized as a wireless interface and it returns the usual info
But when i run iwlist eth2 scan, i get
eth2 No scan results
My wireless adapter was working before i reformated my desktop, and my laptop can connect fine while im sitting right next to my desktop. The network I am trying to connect to has a WEP key.
Where did i mess up?

AngryKoala wrote:*bump*
I followed the same instructions as the OP to no avail.
That includes the PKGBUILD.
I did the process through AUR, then I did it manually.
EDIT: Alright. I got it to work with ndiswrapper...
I have a Linksys WMP300N (I bought it cuz it has a huge antenna) and its drivers would not work. So I took a portion of a dell driver and mixed it with the linksys driver and it worked with ndiswrapper. Thanks Archers.
Last edited by AngryKoala (2009-10-08 23:34:03)

A88X-G45 with win 7 64 profesional no sound after driver instalation

Hello,
I replaced my dead "mb" with new "A88X-G45 gaming" and also instaled "win 7 64 pro" and have realtech driver problem.
On fresh windows instalation sound is working but when i install my drivers given on cd or downloadwd from MSI site my sound is not working.
One moment sound icon in system tray in normal next when i try to do something like try config sound device it sitches to disabled.
If I try to open some program using driver says : no audio devices are installed, when i click repair in troubleshoot sound problems it say it is fixed,
but in a few sec if you try to do anything sound is back to disabled. If u go in speaker properties it say the device you are configuring has been removed.
When i deinstall drivers i have sound but offcourse i want my drivers to work properly my config :
BIOS - E7900AMS V1.0
MBO - A88X-G45
CPU - A10 7850k
RAM - 2x4 gb patriot viper 2400 mhz PC3 19200
HDD - wd5000 velociraptor 500gb 10000 r/min
GPU - 2x atiRadeon HD 5770 1gb ram each
PSU - corsair 700 gs
OS - win 7 64 professional
I even reinstalled windows thinking maybe problem was there, so no updates, fresh windows, driver reinstalation, tried step by step instalation, downloaded driver from site nothing worked, so am also bezerked by this problem and like m8 sad this is not my first pc am putting together. Tryed diffrent version of win 7 like ultimate still same issue. Everithing else is working perfectly.
So please help us solve this problem so we can enjoy our products, thanks!

Hi just bought the same motherboard this weekend. I also have the same problem with the sound driver. anyway later I will try to update my windows to SP1 and see what happened.
BIOS - Updated to latest version
MBO - MSI A88X-G45
CPU - AMD A10 7850k
RAM - 2x4 gb Kingston Hyper X Genesis 1866
HDD - Samsung 840 EVO 250GB
GPU - MSI R9 270X Gaming 2GB
PSU - Cooler Master Silent Pro M2 850w
OS - win 7 64 Ultimate

Not booting after driver install

My computer will not boot bast the screen with the "Spaceship" and "MSI Platinum". All components are operational, I know this because the computer was working perfectly fine prior to installing the mobo drivers from the provided disc...now this...
Any thoughts would be greatly appreciated...I cannot get past this screen in order to see if it is posting, nor can I boot into DOS/BIOS...what can I do...
Please Help...

Quote from: tubatime1010 on 05-November-07, 14:58:30
Cleared the CMOS using the button on my mainboard. Nothing.
Could not get the system post to appear by pressing TAB at the logo.
Used the "D-Bracket" that I just discovered that I had.
Realized that it is hanging at "Initializing Video Interface"
....Now what? The card worked until i installed the drivers...
"....Now what? The card worked until i installed the drivers..."
Drivers can't affect post boot procedure...
"....Now what?"
Re-seat VGA, ensure its filled well into PCI-E slot, if VGA got own power connector, make sure power cable from PSU to VGA is plugged and connected well. Re-try to boot, if no change test VGA in another machine to ensure its works.. Other possibility can be PSU weak or failure.
Try with barabone setup with board out of case(with one memory stick only in 1st DIMM slot), it could be shorting issue.

Re: Horrible image quality after driver install.

test it in another computer to isolate the issue
is it something wrong with the card itself,
or is the issue caused from something in your PC like PSU or something else

all my games run from the 7200 HDDrive - now my problem is while the frameratecounter shows good FPS (around 60)
all the games stutter every few seconds...
in ryse it happens almost all the time when the game zooms in for the kill-moves.
in vanishing o...

My iphone 4 blackout after I install the IOS 7. what should I Do ?

My Iphone 4 black out after I install the IOS 7.0. My screen is black now. I still can get call in but I can't answer my phone.what should I do ? How could I reset my phone back ?

First try this, press and hold the home and power buttons until the Apple icon is displayed, then let go.

Black screnn after driver install on 4650

Similar Messages

Maybe you are looking for