Black stain on the back of the camera

What should I do?

yeah, my bad english..
my mb didnt (had never) shut itself down due to heat, but, for some reason, maybe the way it looks, i am convinced that it is caused by the heat.
overheat: i mean the case does not touch the table, only 4 support feet touch the desk, so it's not like a cloth iron that could change the color of anything that touchs it...
that should be the marware protective pad
i dont know if it's covered by the warranty, and that's what i want to know
i think the 1st gen. is the core duo version and newer are core 2 duo
im not sure i explaind it clearly -_-!!

Similar Messages

I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, problem comes back.

I get a black screen on the camera app on my iPod touch? Is there a solution? Resetting only helped for a few days, the problem comes back.
Camera works, with the side buttons it takes pictures.
Although I'm not able to see on the screen.
Mike

First try a restore from backup
If problem still occurs try a restore to factory defaults/new Pod.
If still occurs likely a hardware problem and an appoitment at the Genius Bar of an Apple store is in order.

Does my iPhone 5S case have to include a black ring around the camera cutout?

I am getting the gold 5S and I want to get a case to complement the color of the phone. However, all of the champagne-colored cases I can find do not have a black ring around the camera cutout. I was just wondering if the black ring is necessary to the flash and what not.

It just really depends on how thick the case is and how big the camera hole cutout is. If it's anything thicker than any case labeled thin or ultra thin, you'll want that black ring otherwise all your pics will be washed out.

Black spot on the camera

Two random black spots appeared on my camera display, the phone didn't get wet or anything, seems like dirt from the inside... should I take it to apple's customers service? anybody with the same problem?
thank you

I have the same issue - perhaps not exact but extremely similar. In photo mode, there is a small purplish speck, which I initially thought as dust or something, and of course it ends of in photos taken. However, this speck is not present in video mode, meaning there is no dust, but some sort of artifact on the photo processor or something. Either way, itsa product defect - I plan on seeing if Apple will support this and replace thephone.....

Can I get rid of the black bar with the icons on f...

When on cam with a friend the black bar with the cam, mic icons fills part of screen can I remove this and still get the box to type in

I have the same problem and hope someone has a solution.

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

Please help me... I reset the setting of my ipadmini then it turned black for 4hours now and it never came back to the way it was before. i need you help quick. thanks in advance.

Please help me... I reset the setting of my ipadmini then it turned black for 4hours now and it never came back to the way it was before. i need you help quick. thanks in advance.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Message was edited by: Diavonex

Hi, I have an iphone4 and all of a sudden none of the apps (except the ones that came with the phone) will open. The screen goes black then it goes back to the homescreen. Any ideas? Thanks in advance!

Hi,
I have an iphone 4 and all of a sudden none of the apps will work, except the ones that came with the phone. When I open them the screen goes black then it goes back to the homescreen.
Also when I plug the phone into itunes it only gives me the option to either restore or eject the phone. Up until today I never had any problems, I sync it regularly and all the software (inc itunes) is up to date. The last time I backed it up was about a month ago when I got the phone, (a replacement as my other iphone4 had loads of problems) so I don't want to have to restore it and lose everything off it!
Any ideas? Thanks in advance!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

I updated my iPod tough 4G to iOS 5 and can no longer access my camera. When I tap the camera icon it goes to a black screen. HELP?

Camera no longer working in iOS 5 on my iPod touch 4G. I have a black screen when I tap the camera icon. I still have all my photos, but no camara. Any suggestions before I head to the Apple Genius Bar??

Im having the same problem. I just got the itouch 4g this past sunday and everything was working great. Yesterday and today the camera went black out of nowhere and its black right now. After i turned it on and off it went back on but its doing it again. So i assume its just an iOS 5 bug thats doing this. But is there any talk about fixing this?

What is the black spot on my screen I try to use the camera that faces me?

When i tried to use my camera on my iPod touch, a small black circle appears in the middle of the screen. It only happens when I use the camera that faces me, not the one on the back. I cleaned the screen thinking there was something on the lense but it is still there. I've only had it 3 days!

Unless you have a black circle on your nose, there is a problem with your iPod.
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If that doesn't work, call Apple. After all, the unit is brand new. 800-275-2273 in the U.S.A. and, I think, Canada.

In AE CS6 I have 2 3D text layers swapping poition as the camera pulls back from them.

In AE CS6 I have 2 3D text layers swapping poition as the camera pulls back from them. One layer has a blur added and if I switch off the fx then they stay in the correct order.
The whole comp consists of 25 tiles (2500x2500px) laid out in 3D as a surface, it is a large map, and the text, which are place names, are at 90 degrees to it. I have placed nulls on the surface to to anchor lights and text to the correct points on the map.
I wanted a drop shadow behind the text to aid legibility against the background but since using a layer style breaks the render order in 3D space I have duplicated the text, made the front layer white and the back layer black and added a fast blur to the back layer.
There are expresions to fix the position of the text layers to a null, another expression that rotates both layers linked to rotation of the null that the camera orbits around and also a scale expression that links the scale of the text to the distance from the camera, so the text stays the same size in the frame no matter how far or close the camera moves. In the comp the text layers are next to each other, the white is the index number above the black.
This has all worked fine. The camera, pulls back, rotates around and the text faces the camera and stays a constant size in the frame. Then I was asked to tweak the move. Suddenly the two text layers swapped round, the black shadow layer obscuring the white text when the camera is in close. As the camera pulls back they go back to their proper positions. However if I turn off the fast blur then they both do what they ought too, white renders ontop of the black no matter what the distance.
Does anyone have a clue as to why?

It's not just a preview issue though, as it also renders out. So there's something going on.
My fall back was going to be to switch to 2D text and use an expression to link it's 2D comp position to the null in 3D world space.
Totally forgot about the Drop Shadow effect, I've been using layer styles for so long now, as there's more control control over the look, but Drop Shadow appears to be working.
Many thanks for that. A big help!

TS4006 The camera shutter will not open and the camera screen is black front and rear ipod 4, tried force quit and reset, help?

The camera shutter will not open sometime and the camera screen is black. It seems to open as if were switching to the rear but that also appears black? i have force quit the app and hard/soft reset, help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

When i take a picture with flash the camera goes black

Whenever I try to take a picture with flash on my camera goes black.

There are two issues that come to mind... the first (hopefully it's this one) would be that you have a software issue that could be solved by restoring your iPhone from a back up...
The other would be that you have a hardware issue with the camera ... if the camera worked fien before you upgraded, then likely it's a corrupted software file that can be solved by doing the restore.

I can watch my custom DVD in iDVD 7 preview but burnt dvd plays back black with only the audio

I can watch my custom created DVD in iDVD 7 preview but once the disc is burnt and I play it back in DVD Player, the screen is black with only the audio playing back. I have tried using three different blank DVD manufactures.

Hi
Most probably depends on what movie codec You feed iDVD. May be You find any clue here.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Iphone screen is basically black, but sound still works aswell as the light beside the camera

Hi. I have an iphone 4s and the screen is barely readable. it is nearly completely black. The light beside the camera seems to come on every time that I turn on the phone but yet the screen doesn't seem to come on. i have restored the iphone and done everything it says in other forums but yet nothing is working. it is on the set up screen ready to set up as a new iphone but it is so hard to see everything that i cannot set it up. im planning on bringing it back to vodafone tomorrow to see if they can do anything. Any suggestions on what to do?

Sounds like it may be a hardware issue.
Did the issue happen over time or did something cause it (dropped it, water, etc.)

Black stain on the back of the camera

Similar Messages

Maybe you are looking for