Black Theme Issues

I have two issue with the new 'Black Theme' on the Q10.
Blackberry travel: I have problems seeing the font, it's very dull and not visible.
Pobcasys: same as above. Actually can't see anything for some reason. Launched Pobcasts on my other new BBZ10 and it was no problem whatsover.
Anyone else having these issues?
Thanks,
MRK
Solved!
Go to Solution.

OK, so i figured it out. The problem was that I did a restore from my Z10 into my Q10 and all the programs were installed on the Q10. So I deleted the Blackberry Travel, Podcasts and Crackberry apps and reinstalled them. Now they work fine again. So best thing is when restoring from a Z10 to a Q10 or visa versa, do not restore the apps, just redowload them again.

Similar Messages

The Windows 7 Black Screen Issue

I am putting in Bootcamp with a Windows 7 install. I checked these forums and made sure I had all my prep work done.
I referenced article TS3173 and downloaded the neccessary drivers for 7, formatted a 16GB SD Card as FAT Bootable and copied the drivers and autounattend.xml files onto the root of the drive.
THe installation as going as planned but at the end I'm still ending up with a black screen. Windows is installed ok but on the restart after" Preparing for FIrst Use" comes up the screen goes black.
Obviously, the drivers are not being installed from the SD card, I tried it on a USB External driver as well. Am I missing something here? I read every post I could find on it and I can't see where I am doing anything incorrectly.
Thanks
Tom

You don't need Paragon or another NTFS driver. That may work (I've used it, but I was using a full hard drive anyway to begin with).
Apple's method:
http://www.apple.com/support/bootcamp/
*My iMac (27-inch, Late 2009) displays a black screen during installation of Microsoft Windows 7 using the Boot Camp Assistant. How do I fix it?*
The Windows 7 installer does not include required graphics or Bluetooth drivers for this computer. To obtain the necessary drivers and resolve the issue, see this article (creating the SD card and drivers for the "black screen" issue).
http://support.apple.com/kb/HT3986
http://support.apple.com/kb/TS3173

Air 3.3 beta PC audio distortion / Air 3.1 / 3.2 Mac black screen issue

Hi there,
I've recently released a large game coded in Flash Builder with Air (www.lonesurvivor.co.uk), and I used Air 3's captive runtime feature to bundle it for Mac and PC.
The initial build used Air 3.2 and for a large proportion of OSX users, there were no visuals at all, just sound and the game obviously working underneath. This caused a very large support issue, and took several weeks to deal with, as well as having to maintain a seperate Projector version for those for whom the Air version wouldn't work. I wish I had known that the game would fail on some Macs, but unfortunately the issue showed up on none of the ones tested.
I'm about to launch the updated build of the game which uses Air 3.3 beta 1, as it seems to fix the black screen issue for all those who experienced it. I was very happy that Adobe have managed to iron this out, even if there was no response to the bug I entered into bugbase.
The problem is, on a final test on XP SP2, the 3.3 beta version produces what appears to be filtered graphics... which is how the Mac version has always appeared, but the PC version of the game seemed to use what looked like nearest-neighbour sampling in Flash's fulllscreen upscaling, which looked good for the zoomed pixel art in this game.
This is a small cosmetic issue, but there is another one whhich is far more severe - the audio has become extremely distorted, and is now unlistenable.
So with 3.2 giving me no visual on Macs and 3.3 giving me unlistenable audio on PCs, I will now have to maintain two versions again. I really would like to keep one project I can quickly make changes to, but the seperate problems in different platforms means I lose out on the great cross-platform functionality of Air. I'm hoping this is a known issue, but I couldn't find it on google / bugbase / these forums.
Could these two issues be related - is hardware acceleration not working or something? Somehow I think it is, because the XP test machine is quite old, and tended to fall over with the game running in software mode in a Flash projector.
I tried swapping out the Air 3.3 runtime for the previous 3.2 I shipped with, and editing the XML desciption to make sure it was set to use that and, sure enough, the game worked as it did before. So there is definitely something up with the beta. I'm just glad I caught this problem before I shipped as going to save me thousands of emails of support!
So I guess my question is - is this a known issue? And if so, do you have any workarounds / or are Adobe working on a fix?

Hi Chris,
Thanks for the prompt response - I guess I should have tried the forums instead of the bugbase last time... It really was a support nightmare! Not least because I had to deal with the problem of saved games being wiped by over-zealous browsers on the backup Projector version I was supplying Mac customers with.
Fortunately the Mac Air 3.3 runtime works great.
Out of interest - there is still the difference in GPU scaling used between Mac and Windows though, which there always has been since it was introduced (is this a known issue btw?)
Which leads me to the 3.3 beta 2 - I tried it out last night, and while it corrected the blurry graphics (the scaling appeared nearest neighour again on XP), the audio suffered the same distortion.
In addition, I had several other XP / Vista / Win 7 users test out the build, and the user with XP SP3 also suffered the issue.
So I'm planning to ship the PC version with 3.1 as it worked well for the first release, and use 3.3 beta 1 for the Mac version. Unfortunately I've run out of time and need to get it out there!
I'd definitely be interested in getting into the pre-release program. I'll write you an email and send the builds of the game too.
Cheers,
Jasper

Black images sometimes invisible with black theme

So, I have black theme for windows and had all sorts of kluges set up to make a black theme on websites in Chrome. After a while, I installed firefox to get around one of the problems it caused, and Firefox detected my settings and was much better from the get go.
One problem remains: sometimes images are invisible. For example, all but the last images on this page: http://what-if.xkcd.com/68/
I think I know what the problem is: 90% of the time, it's a simple white and black image with no boarder. The black stays black, while the background turns black, and the image is transparent. The image loads fine, but it's invisible.
A good way to fix it, 90% of the time, would be to make an addon that finds images, and before letting firefox display them, check if they are transparent and, if they are, check if they only use black. In that case, the image inverts them. This just seems like the most asthetically pleasing solution to me, of course: filling in the transparent areas with white would also work.
So, is there such an addon? It sounds easy to make. Would it work?
This is kind of a pain in the ass on certain cites that use images like this as link buttons.

Hello,
Assuming you are not getting any errors during the acquisition in MAX and didn't change any of the attributes of the camera (running in the default mode), it sounds like the iris on your lens might be closed all the way that it's not letting any light in. Try adjusting the iris so there will be more light going to your sensor. If that doesn't work, try removing the lens from your camera in order to verify that your lens is not the problem. If all these don't make a difference on the acqired image, try a different camera or a different framegrabber that you know is configured properly and works.
I hope this helps!
Regards,
Yusuf C.
Applications Engineering
National Instruments

Microsoft Office Black Bars Issue MB467LL/A

On my 2008 Macbook running the latest version of Mavericks, I'm having a really annoying quirk with Microsoft Office. When I take the app fullscreen (to it's own actual window, not just covering the desktop) it works fine. However, if I swipe back to the desktop to do something and then swipe back to Office, there's usually a black bar at the top and bottom of the page. It seems to leaving space for the options bar at the top of the page and the dock at the bottom, except neither of them show up (nor should they, since I'm in fullscreen mode). It appears that working in safari is the culprit that most consistently recreates this issue. Has anybody else had this issue, and if so were you able to resolve it?

Used Mavericks migration asstant to move to a new MacBook Pro 7 days ago and Word became unusable with Dragon Dictate for Mac with the 'Can't load Visual Basic for Applications' message.
After talking to the nice people at Apple support, they suggested calling the Microsoft Mac team- who wanted £65 to talk to me. Decided, with Pages installed, that Word wasn't worth the money to me, so politely declined and went back to the forums and worked through the suggestions to delete the preferences, run the updates again, using Font book to repair fonts & co
Tried the 'rename the HD to the same as the original' suggestion without sucess-
The only thing that worked for me was to reinstall Office from the disk image. Painless -- and the reinstalation preserved my registration and templates. Only problem was locating my copy of the disk image!

Black ink issues

I can print in black ink from my Kindle Fire, but neither a Dell laptop nor Dell tower will print in black. They'll both print in color, but no black. Test pages/cleaning pages have no black on them whatsoever. Ideas??

Hi @bubba_gump,
Welcome to the HP Forums!
I'd recommend that you follow the steps within this Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart 5510 e-All-in... document. If those don't appear to resolve the issue, then please let me know what country you're in and whether the printer is in or out of warranty, thanks!
Hope to talk with you soon
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Killer NIC with ASUS R9 290 black screen issues

Hi there,
I've just set up a gaming system with the B85-G43 Gaming board and an ASUS R9 290 (oc r9290-dc2oc-4gd5) and I've stumbled across a strange problem. Within 5 minutes I get a black screen and the only way to get out of it is to reset my computer. It freezes, but doesn't stop working immediately.
So... I've been testing with W7, W8 and W8.1 and no difference. Until... I shut down my network card and no black screens anymore. Also, when I disable my R9 290 in the device manager there are also no black screens anymore. So I should search it in the combination. I've installed all the newest drivers, but no luck.
Has anyone come across the same issue and how did you solve this? I'm getting really frustrated about it...
Thanks for your help guys!

Quote from: Nichrome on 20-January-15, 19:56:04
There is no chance this will work together.
Radeon R9-290 - 31A and a 550W psu minimum
Test stronger power supply. And that might be why you also have issues with other things like in this case, Killer NIC
Ok I've tested your suggestion and replaced the PSU with a cooler master G750M 750 Watt.
Exactly the same problem. I keep getting black screens as soon as I log into windows and the radeon drivers are kicking in. When i disable the radeon drivers: no black screens at all. As soon as i re-enable them: black screen...
Anyone have any other suggestions. Currently I've RMA'd my Asus R9 290. Maybe it'll help but I don't have any confidence....
Thanks!

Can't fix fglrx/Xorg black screen issue, no matter what I try!

I've tried everything that I can think of or find online to fix this. Please help.
I'm getting what seems to be an oft-recurring issue where Xorg simply won't start when using the fglrx driver. It boots fine with VESA or Xfree86-ati, but using fglrx I just get a black screen that won't accept any input, although ssh'ing into the box while this is happening still works.
I've been reading forum posts for *days* now trying to get this to work. I've tried every combination of 12.4/12.6 drivers, Xorg 1.11/1.12 and modeset/nomodeset kernel parameters. I definitely do not have any radeon or other DRI modules compiled into my kernel. I have an HD4200, SLiM/Xfce4, and I'm using the proper catalyst-hd234k package. The fglrx module has been compiled for my kernel and added to my initramfs, and it loads at boot. lsmod reveals its presence and does *not* show 'radeon'. I have uninstalled every video driver aside from fglrx and Xfree86-vesa. Output does not seem to be going to HDMI instead. Switching consoles/typing blindly does not work, and I need to hold the power button for 5 seconds to shutdown. I've run aticonfig --initial and tried aticonfig --acpi-services=off, too.
I've tried *all* the different tweaks that I've found to try to make a working xorg.conf, but here's what I'm trying to use now:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#Section "Module"
# Load "extmod"
# Load "dri"
# Load "glx"
# Load "dri2"
# Load "record"
# Load "dbe"
#EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:5:0"
Option "EXAPixmaps" "off"
Option "XAANoOffScreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1440x900" "1366x768"
EndSubSection
EndSection
My Xorg log seems fantastically uninformative, since it seems to show the fglrx module loading and does not report any errors:
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 19.388] X Protocol Version 11, Revision 0
[ 19.388] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 19.388] Current Operating System: Linux splice 3.5.3-1-ARCH #1 SMP PREEMPT Tue Sep 18 00:11:37 EDT 2012 x86_64
[ 19.388] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=228ebc5f-ada6-4d9c-9e93-fc645085e5cd ro quiet nomodeset resume=/dev/sda5 init=/bin/systemd
[ 19.389] Build Date: 27 August 2012 08:04:39AM
[ 19.389]
[ 19.389] Current version of pixman: 0.26.2
[ 19.389] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.389] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.389] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 18 07:02:13 2012
[ 19.496] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.769] (==) ServerLayout "X.org Configured"
[ 19.769] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 19.769] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 19.790] (**) | |-->Device "aticonfig-Device[0]-0"
[ 19.790] (**) |-->Input Device "Mouse0"
[ 19.790] (**) |-->Input Device "Keyboard0"
[ 19.790] (==) Automatically adding devices
[ 19.790] (==) Automatically enabling devices
[ 19.993] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.993] Entry deleted from font path.
[ 20.193] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.193] Entry deleted from font path.
[ 20.193] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.195] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.196] Entry deleted from font path.
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.196] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.196] Entry deleted from font path.
[ 20.196] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.196] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 20.196] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 20.196] (**) Extension "Composite" is disabled
[ 20.196] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20.196] (WW) Disabling Mouse0
[ 20.196] (WW) Disabling Keyboard0
[ 20.196] (II) Loader magic: 0x7c8b00
[ 20.196] (II) Module ABI versions:
[ 20.196] X.Org ANSI C Emulation: 0.4
[ 20.196] X.Org Video Driver: 12.1
[ 20.196] X.Org XInput driver : 16.0
[ 20.196] X.Org Server Extension : 6.0
[ 20.198] (--) PCI:*(0:1:5:0) 1002:9712:17aa:21b8 rev 0, Mem @ 0xc0000000/268435456, 0xd0400000/65536, 0xd0300000/1048576, I/O @ 0x00009000/256
[ 20.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 20.198] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 20.198] (II) "dri2" will be loaded by default.
[ 20.198] (II) LoadModule: "extmod"
[ 20.439] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.468] (II) Module extmod: vendor="X.Org Foundation"
[ 20.468] compiled for 1.12.4, module version = 1.0.0
[ 20.468] Module class: X.Org Server Extension
[ 20.468] ABI class: X.Org Server Extension, version 6.0
[ 20.468] (II) Loading extension MIT-SCREEN-SAVER
[ 20.468] (II) Loading extension XFree86-VidModeExtension
[ 20.468] (II) Loading extension XFree86-DGA
[ 20.468] (II) Loading extension DPMS
[ 20.468] (II) Loading extension XVideo
[ 20.468] (II) Loading extension XVideo-MotionCompensation
[ 20.468] (II) Loading extension X-Resource
[ 20.468] (II) LoadModule: "dri"
[ 20.468] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.545] (II) Module dri: vendor="X.Org Foundation"
[ 20.545] compiled for 1.12.4, module version = 1.0.0
[ 20.545] ABI class: X.Org Server Extension, version 6.0
[ 20.545] (II) Loading extension XFree86-DRI
[ 20.545] (II) LoadModule: "glx"
[ 20.554] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.685] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 20.685] compiled for 6.9.0, module version = 1.0.0
[ 20.685] (II) Loading extension GLX
[ 20.685] (II) LoadModule: "dri"
[ 20.685] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.686] (II) Module dri: vendor="X.Org Foundation"
[ 20.686] compiled for 1.12.4, module version = 1.0.0
[ 20.686] ABI class: X.Org Server Extension, version 6.0
[ 20.686] (II) LoadModule: "record"
[ 20.686] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.716] (II) Module record: vendor="X.Org Foundation"
[ 20.716] compiled for 1.12.4, module version = 1.13.0
[ 20.716] Module class: X.Org Server Extension
[ 20.716] ABI class: X.Org Server Extension, version 6.0
[ 20.716] (II) Loading extension RECORD
[ 20.716] (II) LoadModule: "dbe"
[ 20.717] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.742] (II) Module dbe: vendor="X.Org Foundation"
[ 20.742] compiled for 1.12.4, module version = 1.0.0
[ 20.743] Module class: X.Org Server Extension
[ 20.743] ABI class: X.Org Server Extension, version 6.0
[ 20.743] (II) Loading extension DOUBLE-BUFFER
[ 20.743] (II) LoadModule: "dri2"
[ 20.743] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.811] (II) Module dri2: vendor="X.Org Foundation"
[ 20.811] compiled for 1.12.4, module version = 1.2.0
[ 20.811] ABI class: X.Org Server Extension, version 6.0
[ 20.811] (II) Loading extension DRI2
[ 20.811] (II) LoadModule: "fglrx"
[ 20.811] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 22.869] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 22.869] compiled for 1.4.99.906, module version = 8.97.2
[ 22.869] Module class: X.Org Video Driver
[ 22.871] (II) Loading sub module "fglrxdrm"
[ 22.871] (II) LoadModule: "fglrxdrm"
[ 22.871] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 22.979] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 22.979] compiled for 1.4.99.906, module version = 8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[ 22.979] (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.97.100.3
[ 22.979] (II) ATI Proprietary Linux Driver Build Date: Jul 3 2012 23:56:30
[ 22.979] (++) using VT number 7
[ 23.041] (WW) Falling back to old probe method for fglrx
[ 23.355] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 23.449] (--) Chipset Supported AMD Graphics Processor (0x9712) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:0) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:22:2) found
[ 23.464] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 23.465] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 23.477] (II) AMD Video driver is signed
[ 23.478] (II) fglrx(0): pEnt->device->identifier=0x1cdc440
[ 23.478] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[ 23.478] (II) Loading sub module "vgahw"
[ 23.478] (II) LoadModule: "vgahw"
[ 23.478] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 23.488] (II) Module vgahw: vendor="X.Org Foundation"
[ 23.488] compiled for 1.12.4, module version = 0.1.0
[ 23.488] ABI class: X.Org Video Driver, version 12.1
[ 23.489] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 23.489] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 23.489] (==) fglrx(0): Default visual is TrueColor
[ 23.489] (**) fglrx(0): Option "DPMS" "true"
[ 23.489] (==) fglrx(0): RGB weight 888
[ 23.489] (II) fglrx(0): Using 8 bits per RGB
[ 23.489] (==) fglrx(0): Buffer Tiling is ON
[ 23.508] (II) Loading sub module "fglrxdrm"
[ 23.508] (II) LoadModule: "fglrxdrm"
[ 23.508] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 23.508] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 23.508] compiled for 1.4.99.906, module version = 8.97.2
[ 23.525] ukiDynamicMajor: found major device number 251
[ 23.526] ukiDynamicMajor: found major device number 251
[ 23.526] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 23.526] ukiOpenDevice: node name is /dev/ati/card0
[ 23.526] ukiOpenDevice: open result is 12, (OK)
[ 23.526] ukiOpenByBusid: ukiOpenMinor returns 12
[ 23.526] ukiOpenByBusid: ukiGetBusid reports PCI:1:5:0
[ 23.526] (**) fglrx(0): NoAccel = NO
[ 23.526] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 23.526] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4200 Series" (Chipset = 0x9712)
[ 23.526] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x21b8)
[ 23.526] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 23.526] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 23.526] (--) fglrx(0): MMIO registers at 0xd0400000
[ 23.526] (--) fglrx(0): I/O port at 0x00009000
[ 23.526] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 23.555] (II) fglrx(0): ATIF platform detected
[ 23.556] (II) fglrx(0): AC Adapter is used
[ 23.576] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 23.582] (II) Loading sub module "vbe"
[ 23.582] (II) LoadModule: "vbe"
[ 23.603] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 23.617] (II) Module vbe: vendor="X.Org Foundation"
[ 23.617] compiled for 1.12.4, module version = 1.1.0
[ 23.617] ABI class: X.Org Video Driver, version 12.1
[ 23.629] (II) fglrx(0): VESA BIOS detected
[ 23.629] (II) fglrx(0): VESA VBE Version 3.0
[ 23.629] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 23.629] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 23.629] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 23.629] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 23.629] (II) fglrx(0): VESA VBE OEM Product: RS880M
[ 23.629] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 23.652] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 23.652] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 23.652] (II) fglrx(0): PCIE card detected
[ 23.652] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 23.652] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 23.655] (II) fglrx(0): Using adapter: 1:5.0.
[ 23.663] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 23.691] (II) fglrx(0): Interrupt handler installed at IRQ 18.
[ 23.691] (II) fglrx(0): RandR 1.2 support is enabled!
[ 23.691] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 23.692] (==) fglrx(0): Center Mode is disabled
[ 23.692] (II) Loading sub module "fb"
[ 23.692] (II) LoadModule: "fb"
[ 23.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.722] (II) Module fb: vendor="X.Org Foundation"
[ 23.722] compiled for 1.12.4, module version = 1.0.0
[ 23.722] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.722] (II) Loading sub module "ddc"
[ 23.722] (II) LoadModule: "ddc"
[ 23.722] (II) Module "ddc" already built-in
fglrxinfo while running Xorg without an xorg.conf gives me this:
X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 135 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 12
Current serial number in output stream: 12
And in a console it tells me that it can't open display(null)... all of which I suspect is expected behaviour when the driver is not actually in use. I just wish something would tell me what's actually *wrong*, here, instead of just expecting me to magically figure out exactly the right configuration that will actually let me use fglrx.
I... I just want to be able to play minecraft. :`(
Last edited by Medlam (2012-09-18 13:48:42)

I'm sure you've tried reading https://bbs.archlinux.org/viewtopic.php?id=57084
and http://wiki.cchtml.com/index.php/Configuring
and I'm sure you've done
aticonfig --initial
I had to use https://wiki.archlinux.org/index.php/AT … leshooting, specifically the part about disabling EXAPixmaps to make my card work.
What model is your ATI card? that would help. A LOT of ATI cards were dropped from proprietary support with the Catalyst driver.

UIImagePickerController Custom Overlay Black Screen issue while using Video trimming controller

Hello Everyone ,
I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
Handler Method ::
[self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                              completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                  AVAssetImageGeneratorResult result, NSError *error) {
I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
This issue occur in ios7 but not in ios6.
Can anyone have any idea about this ...Please relply me ASAP.

Hello Everyone ,
I have problem while opening camera in recording mode using UIImagePicker Controller with custom overlay and it should open first time properly .But when i push to next view controller and return back again to open camera at that time camera displays black screen for few time.
The Logic in the inside view controller is for VideoTrimming . For video trimming i have used "SAVideoRangeSlider" controll. SAVideoRange Silder perform task to get all thumbnail images from video which i have assign . It uses AVAsset image generator class provided by apple to get image frames from videos and it runs in background using its handler method.
Handler Method ::
[self.imageGenerator generateCGImagesAsynchronouslyForTimes:times
                                              completionHandler:^(CMTime requestedTime, CGImageRef image, CMTime actualTime,
                                                                  AVAssetImageGeneratorResult result, NSError *error) {
I have nilling all the objects related to image generator class when i came back to Camera screen. still issues of black screen occur while opening camera.
This issue occur in ios7 but not in ios6.
Can anyone have any idea about this ...Please relply me ASAP.

HP Officejet Pro K8600 - Black Ink issue

Hi everyone,
I have HP Officejet Pro K8600, the printer was fine but after I printed on 4x6 HP Premium Glossy Photo Paper now when I print normal text document the Black Color is not too black it is sort of faded black (very dark grey). I chose different presets e.g. Default Settings, Plain Paper Best, Plain Paper Fast Draft, Plain Paper Fast Draft Black and White and set paper type as Plain Paper but the results are all same. But again when I print a full color photo on 4x6 HP Premium Glossy Photo Paper with preset Photo Paper and HP Premium Photo Paper the printout comes fine and the black color is deep and normal.
I will be waiting for your prompt solutions.
Regards,
Mak

I will add the following:
I changed the Black cartridge but still with the same issue. I am trying to change the printhead with following the steps given in this page http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01289505 but the carriage does not move to the left.
Any clue?

HP 5550 Excess Black Ink Issue

Hi,
I have an imac G5 running OSX 10.4 and an HP deskjet 5550 printer connected via USB that has started to basically put too much black ink on the page after changing cartridges so prints now smudge really badly. I thought the new cartridge was faulty so I changed it for another one but the same thing still happens. I think it might be a printer set up or driver issue as I have played with all the settings and it just about works if I choose draft print quality. The colours print fine as does printing when using a photo colour cartridge in place of the black ink one. I did a print recently on best quality so I was wondering if it was related to that? Also what driver or settings should I be using? Thanks for any ideas or advice as I'm fairly new to macs.

The brackets on the ink levels page are actually printed with a combination of color inks, they will print in what looks black even if black is not working. I would suggest the troubleshooting steps in this document. Be sure to check the vents. If this does not resolve the issue the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

InDesign CS3 - Default Black color issue

Default Black color converted as Spot color in Indesign CS3.
I'm using default color "Black" in InDesign CS3. While creating PS from InDesign CS3 and convert it as PDF using Distiller 7 & 8, it would have changed as "Spot Color Black" instead of color "Black(CMYK)".
Open the swatch and duplicate the color "Black" and renamed as "C=0,M=0,Y=0,K=100". It would work properly. i.e. output PDF has CYMK black instead of Spot color.
We are unable to find/change globally because the Default color [Black] has both text and object.
We do not have any problem with this default black color in Indesign CS2.
It would be better if you provide a solid solution for this issue immediately. I need to send a test file to the printer on tomorrow (05/27/09).
I have attached Testing.pdf and screenshot for your reference.
Picture 1 shows the Default Black color converted as Spot color.
Picture 2 shows duplicate black color created from Default [Black] color and we don't find any issue.
Thanks
Johnson

First, this is a user forum, so all you'll get here is advice, not a "solid solution" from Adobe.
Second, the current versions of InDesign and Acrobat are 6 and 9, respectively, and there will never be any new patches issued for earlier versions. Adobe does not divert effort away from current development to patch old software.
This has been discussed here in the past few months. You should be able to find the thread if you search for keywords like spot black. For what it's worth, Acrobat 9 Pro's preflight does not detect a spot black in your sample PDF (though Pitstop might).
I'm curious why you feel the need to distill PDF rather than export (as I see you did with the file you posted)?

720p over HDMI - black bar issues

Hi all.
I've got a 1st gen V-box, which worked great until about 9 months ago. I had been happily using 720p over HDMI for about a year. However, I suspect a software "update" around this time caused problems, as the 720p and 1080i settings are now incredibly unreliable.
Specifically, when I set the box to show HD resolutions, there are usually black bars down the left and right of the screen, cutting off those sides of the picture. Sometimes the picture displays properly, but this is usually only temporary - after a day or two of thinking everything's sorted, the dreaded black bars reappear when starting the box up for the first time that day. Rebooting doesn't seem to help. The bars even overlay the menus, so it seems to be affecting everything not just live tv. The full picture is shown when I use standard def over HDMI however.
Has anyone else experienced this and if so any ideas how to fix?

Hello
On most platforms, I've experienced black bars at the sides, noteably lower bandwidth channels such as kids or shopping often display what you describe when using any HDMI setting in my experience.
Thre is the ability to hit the shortcuts button on the bottom right of the remote which allows you to scroll through to then stretch the image if you wish- but It doesn't always work, I'll stress again this also happens on my FREESAT box, so I don't think it's an issue generic to Vision.
Couple of questions though,
1: Is it a Toshiba tv? (some firmware upgrades to these sets have caused numerous issues and lip synching problems.
2: have you tried a different HDMI cable? (apologies if that's blatantly obvious!)
I've not tested V.1.5 black box yet to see how this issue is there (note I don't call it a V2 box- as it's **bleep**).
Hopefully, if the rumours are true the development team will scrutinise the forums, realise these issues do indeed exist and can work towards a solution in the Freeview HD offering of whatever comes out next:
My moneys on V1.75 in neon pink with no scart (I know...I'm evil)..

MSI GS60-2PC Screen flicker and horizontal black lines issue

After about 2 weeks of using my GS60, I began to notice that the screen sometimes flickered, and on other occasions horizontal black lines would appear. I have updated my GTX driver to the latest version, and I haven't been able to find any help on the net. Does anyone know how to fix this issue?

Hi!!! I'm Manuel from Argentina. I bought a MSI GS60 in miami 5 months ago, and... I HAVE THE SAME PROBLEM!! sometimes mi screen is flashing and appeared horizontal lines (blacks).
There's no solution for this problem? it's a very expensive laptop.
I hope someone can help.
greetings from Argentina!!

N8 themes issue

I did some update on nokia software and currently lost all previous default themes?
how do I recover to last known working state;

One thing to note, many third party hemes cause the email client to show dark blue text, which is hard to read, so I assume the old themes would have a similar issue, the solution I've used is to use Midnight blue and downloaded some wallpapers I like, the phone looks good and all the apps prform as they should ?
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Black Theme Issues

Similar Messages

Maybe you are looking for