Black Vertical lines and a thin yellow haze in the center of my screen

I can't seem to find the answer to this question, or one that my be a solution. I recently discovered black vertical lines and a yellow haze in the center of my ipod nano 4GB.
One discussion said I should put it to sleep for 4 hours and the lines will erase. That didn't work. What's the common cause to this and how can I fix it? And could it be because I converted it from a mac to windows itunes?

Try giving it a reset. hold down the sleep and home keys until you see the silver apple. Let it reboot and see if that fixes it.

Similar Messages

White and black vertical lines

I Have the iPhone 5. It has been in a case since the day I bought it. It is 2 months out of warranty and I got white and black vertical lines while I was laying in bed. My friend tried checking my screen and replaced it with a working screen and it did the same thing so it wasn't the screen. Took my phone to Apple they said it's the screen and I have to pay $130 to fix it even with it out of warranty..... Lady standing next to me had the same problem they plugged it in fixed it and she was on her way with it. What is wrong with my phone? What should I do?

and one more thing, itunes cannot read my device i did that for 20-30 sec but it won't turn on

Small Black Vertical Lines follow my mouse pointer AND surround all ICONS

Small Black Vertical Lines follow my mouse pointer AND surround all ICONS on my desktop. I just turned on my computer and it showed like this. I already tested my monitor and it's not the monitor.
See a picture of my problem here on my me gallery:
http://gallery.me.com/egarfias/100024
Looking at websites, it's fine the display but any icons and my pointer and things that move have these lines following! Looking at VIDEO, it's the picture is full of white and black lines though you can see the video just fine.
Any ideas? Thank you!!

I am in Safe Mode now: This is the weirdest thing: A bit from column A AND B:
The display is perfect EXCEPT for two parallel lines of 17, 3 millimeter-long black lines that follow the pointer everywhere it goes.
Get this: my current display is 1024x768, but when I change it to 640x480, the pointer and everything is perfect! (of course, I can only see a fraction of my desktop)
But then again... when I zoom in and out holding down control (in 640x480) the pointer lines appear again, but less lines. They disappear when I re-reset it to 640.
Strange.
But yeah, safe mode is NEAR perfect with the except of the cursor lines. I can screen grab my cursor though to show...

Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical spacing?

Ive been pulling my hair out on how to do this all day and im getting no where i dont even know where to begin! Please help if anyone knows how to do this.

enforcer4u,
she said posting here if help was needed was a good idea...
This is Classroom in a forum.
I believe the first line should have read Use 40 black 1 pixel x 400 pixel vertical lines, and create an experimental composition using varying vertical > horizontal spacing.
One way (she may be following this thread, you know) would be to:
1) create a horizontal/vertical (composition Three/Four) line with the Pen Tool with a length corresponding to the whole composition and two or more Anchor Points, ShiftClickDragging at each with different lengths of the Handles;
2) Create a vertical/horizontal line by ClickDragging with the Line Tool (or just Click with the Line Tool and set the Length and direction, then move a copy (ShiftAlt/OptionDrag the original, start dragging a tiny bit before you press the keys);
3) Object>Blend>Blend Options, set Spacing to Specified Steps, 38 steps;
4) Select the lines from 2) and Object>Blend>Make;
5) Select both the Blend from 4) and the line from 1) and Object>Blend>Replace Spine.
Other ways include creating the first line and then ShiftAlt/OptionDragging to create the other lines up/down/left/right depending on composition, or creating or all the lines (maybe using the blend) and then ShiftClickDragging individual lines.

Why when I want to take photo , the camera will appear such pink colour vertical line and become black and the video just can record 1 min only ?

why when I want to take photo , the camera will appear such pink colour vertical line and become black and the video just can record 1 min only ? why ? is that any problem ?

are you using the iOS camera? if you do, visit your apple store for further help, sounds like a hardware problem.
or:
hold home and lock button pressed until your iphone restarts.
if that didn't help, visit your apple store.
if you are not using the iOS camera, delete that app.

Vertical line and missing quotation marks

I am a new user to FlashPaper. When I created by PDF from
Microsoft Word, a black vertical line appeared and my quotation
marks disappeared. What happened? What am I doing wrong?

As you say, it's not waterproof, but it is really helpfull, thanks. The unclosed quotation are easy to find this way.
In Dutch we mainly use single quotation marks (double quotation marks are only used for quotations within quotations). This brings an extra dimension to the issue, since the apostrophe and single quotation mark are the same character. So a phrase like ' I'm having problems finding unopened quotations' with your GREP suggestion will mark the apostrophe in I'm as the closing quotation mark.
So what I'll do is:
1. find unclosed quotations ‘[^’]+?‘ and mark them with a character style WARNING;
2. GREP search ’[^‘]+?’ two following closing quotation marks and make them C=100;
3. GREP search ’[^‘’]+?’ the correct quotations and mark it all K=100;
4. Do a regular search for '^$ any apostrophe/quotation mark followed by a letter and mark them all K=100;
5. Do a regular search for any closing quotation mark left in C=100 and manually WARNING-mark the ones that need to be looked at by the editor.
Step 4 is a bit tricky since any error like 'I agree,'he said (no space after quotation mark) will be marked back to K=100 as well, but those errors I'll probably notice since they're underlined by the grammar control option.
Thanks again for the help.

Actual solutions for C6380 black vertical lines ?

When copying or scanning on my C6380 all-in-one, black vertical lines that are generated from the hinge-side of the glass appear on my documents. While this problem has been posted and re-posted over and over again the only responses I've found have been to clean the glass and inside of the cover. I have done this several times. I have also reinstalled the driver and unplugged the power cable from the both the printer itself and the outlet. The lines do not occur when printing Pages or Numbers or web-generated documents. Any suggestions?
I have a hunch that the only solution is to put up with the lines or but a new copier/scanner.

You can give a try to the Troubleshooting steps in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02169248&cc=us&lc=en&dlc=en&product=3560280&tmp...
Resets should work. Seems like a scanner bulb issue.
I work for HP but my posts and replies are my own.
-Michael

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?
thanks Karl

Clean the small glass strip under the ADF, also clean the withe scanner backing and white strip under the ADF.
I was an HP employee.
Kudos are appreciated if I have helped you.

My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. Help?

My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. I have tried several times to get it past this point but tnothing helped.
I have an appointment at the Apple store today, but was wondering : will all of the information and files on my desktop be lost? Or is this a logic board problem?
Any help is much MUCH appricated.

I'm not sure, if you're out of warrenty it'll cost quite a bit for the replacement of the logic board replacement...unless you have apple care. you could ask apple to try and recover your hard drive but i'm not sure.

When i turn my ipod on i get purple vertical lines and thats all it does, what is wrong with it?

When i turn my ipod on i get purple vertical lines and thats all it does, what is wrong with it?

It may have a bad display screen but you could try resetting to see if that helps.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

Hi Rahhh829,
Welcome to the Apple Support Communities!
It sounds like you may want to get your iPhone evaluated for repair. Please review the following web link for information on the iPhone repair pricing and process.
iPhone Repair and Service - Apple Support
Regards,
Joe

I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

That's a kernel panic and indicates some sort of problem either with the computer's hardware or software. Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. It would help to post the panic log: Mac OS X- How to log a kernel panic.
Meanwhile, try booting the computers into Safe Mode then restarting normally. If this is simply a disk repair or cache file problem then this may fix it.
You can also try creating a new admin account on each computer then booting into the new account. This would help determine if the problem is related to a bad file in the user accounts.

TS3274 My Ipad has a black background now and everything is color faded after the latest software update? I restored and reset the Ipad. How can this be fixed?

My Ipad has a black background now and everything is color faded after the latest software update? I restored and reset the Ipad. How can this be fixed?

How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

For weeks I have been viewing a doggy day care via their web cam. This weekend I upgraded to Lion and have been unable to view the center since. I get an error message for java webcam class not found. All of my software is up to date--suggestions?

For weeks I have been viewing a doggy day care center via their web cam. This weekend I upgraded to Lion and have been unable to view the center. I get an error message for Java plug-in 1.6.0_29 ....webcam class not found. Any suggestions on how to fix this?

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

Black Vertical lines and a thin yellow haze in the center of my screen

Similar Messages

Maybe you are looking for