Black viewer after upgrading color to 1.0.4

i worked with color with a fresh install from fcp-studio 2 installer-discs.
everything worked fine in color, i could see frames work with it and so on...
because of an fpc-project-file i updated the whole fcp-studio to current version, after this update of prokit/color/fcp... color 1.0.4 just shows a black screen in the viewer, no frame-preview anymore!
somebody knows about this problem? why does this happen, what can i do?
im working on a PowerMac G5
OS 10.5.8
Color 1.0.4
thanks for any advice.

just in case somebody has the same problem.
i wiped color 1.0.4 from my disk with appcleaner and reinstalled it, with version 1.0.1 the viewer shows me the frames correctly.
inx

Similar Messages

Black Screen After Upgrading to Windows 8

Hi
I'm experiencing a black screen after upgrading a Dell N5050 B890 to Windows 8.
Tried to refresh the installation but the problem persited. re-installed the Windows 8, the machine logged in successfully but the problem arose again after reboot.
Urgent assistance needed

This problem is solved...
I guess the problem is concerned with the display module controller in the BIOS which is having a slight compatibility issue with windows 8.
This issue is solved by updating the BIOS of your Laptop/PC to the latest version. You can download the latest BIOS from the website of the Laptop company/Motherboard Company.
But for updating the BIOS, you have to start your computer/Laptop for at least one time in Normal Mode. So here are the steps to do so...
1) Boot the Laptop/PC.
2) After the boot screen (The Circle Animation & Windows 8 logo), you will be presented by the lovely & awesome blank screen.
3) Wait for 1 minute so that drivers load into the memory.
4) Press the Power button of your laptop/PC for only a moment (Just Press and release it quickly. Don't hold. We don't want to shut down).
5) This will force the laptop/PC to go into Sleep mode.
6) When the laptop/PC goes in sleep, the laptop fan & other sounds will stop.
7) After 4-5 seconds, press the power button again & release it quickly.
8) Voilllaa!!! The laptop/PC starts & you are presented with the lock screen. Now..... Login! What are you waiting for! :P
This is not the permanent solution. It just lets you start you Laptop/PC.
After updating the BIOS, I strongly suggest that you must download the latest graphics driver for your Computer/Laptop to avoid any further issues.

Unable to see JSF pages in Design View after upgrade to Netbean 6.1

Hi:
I have a Sun Java Studio Creator Update 2 Project and I upgraded to Netbean 6.1 according to Sun's migration guide. It compiles and runs OK, but i can not see any page in design view at all.
Any one has any idea?
thanks

Hi Sriram,
I want to see commit stats on SM50 while background job runs. I unable to see on after upgrade.
all db stats are updated. On Sm50 screen unable to see Database commit count.
Cheers,
Harish

Black screen after upgrading ram (macbook pro late 2007)

Dear Community,
I am willing to donate 100 USD to anyone who is willing/able to provide concrete resolution to this problem.
I am a professional freelance videoeditor and my job is currently stucked due to inability to boot my macbook pro again.
After upgrading the RAM of my MBP (late 2007 model, 17'' display, Intel 2.4GHz Dual Core processor), the screen went black and the system did not boot any more.
I tried to replace the orginal 2 x 1GB DDR2 533 CL=5 SODIMM (single rank) with 2 X 2GB DDR2 800 CL=6 SODIMM (dual ranks).
After the memory upgrade, the system was restarted, I heard a short beep, but the macbook showed a black screen instead of booting properly. The mainboard was powered, the fan was moving. I saw a green led turned on on the center of one side of the macbook.
I tried to mount the previuos 2 x 1GB DRAM SODIMMs, but nothing happened. The system keeps not booting even with the original memory.
I tried already several procedures suggested by the user manual, related to SMC Intel controller reset (with battery and without battery and charger), but those were not effective in restoring the normal operation of the macbook. The system keeps not booting with exactly similar issues (black screen, fan on, short beep after power-on, green LED on).
I also tried to swap the memory DIMMs into the memory sockets. I tried to use a different combination with 1 NEW 2GB and 1 OLD 1GB DIMM. But the problem is still there with similar sympthoms.
DOES ANYONE HAVE ANY CLUE OF HOW TO SOLVE THIS?

My best guess is that you have fried the RAM with static electricity charged up in your body. According to OGELTHORPE a beep on startup is because of no RAM, if when installing you did not do it correctly, you could have fried the RAM, which then your mac will not recognize it. The same with the old RAM, if you tried to re-install it and didn't pull up your sleeve and rest your arm on the inside of the chassis, then it is fried, or if you didn't wear an ESD band and connect it to the the chassis, then it is fried.
Seen as though you can't startup your mac, I can't say to do an AHT, buy some new ram, and start with the lowest one you can, so its cheap for ya use a different company incase is that;) Crucial.com is really good, I got an 8gb upgrade from 2gb. Let me tell you, it's great!
Reply back;)
Chris

Thumbnails can not be viewed after upgrade & update to 08 (7.1)

after upgrading to 08 and updating software and opening it I can not see any of the thumbnails in events or in photos folder. Seems only two people have posted Qs similar to mine. I tried toad's suggestion of opening package content but no data folder was there yet the thumbnails tell me how many pics and size in each event.
has anyone heard from Apple on this issue?

bjtoft
Try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild. Choose all the options.
Regards
TD

[solved] Black screen after upgrade

Hi, I upgraded arch on my old laptop about a week ago and after reboot all I got was a black screen. The problem is ctrl+alt+backspace doesn't do anything, nor does ctrl+alt+f*. So I tried to boot using "arch fallback" and my own arch runlevel 3 grub entry, but got the same problem - I can see the text running during boot, but at some point I get a black screen. I already downloaded puppy linux, but I have no idea where to look. I looked in x.org.log and found a warning about fbdev not found, but I thought I don't need that anyway because afaik xorg was using the intel module, I'm not sure however, because I used hardware auto detection. Without being able to boot I have no idea if there is any way to install it. Thanks in advance for your help.
Last edited by Vozka (2010-01-26 17:48:53)

I'm guessing you have an Intel graphic card. You can try the following to deactivate KMS which is now default for Intel graphics cards:
You can add "i915.modeset=0" to your kernel options in your grub config. This may, however, result in a hard crash on starting X. Maybe this helps, but this is only a workaround. KMS will be the only way in the future (upstream choice).
EDIT:
News item is here: http://www.archlinux.org/news/477/
As I have seen from your pacman.log you have upgrade the kernel to .32, so I think my advice should help.
Last edited by ise (2010-01-26 14:31:24)

Windows 8.1 black screen after upgrading and no media

Hi everyone,
I just bought a second hand S230u i7 and right after I updated it to Windows 8 I got nothing but a black screen and the mouse cursor.
I've tried most of the recovery options and they all ask me for a recovery media which I dont have since I didnt have the opportunity to create once I received it (it started to install Windows 8.1 right after I turned it on).
So right now I have no way to use the laptop because of this update.
Does anyone know how can I get it to work again?
Thank you
Nuno

HI , Welcome to the HP Forums! It is a grand place to find answers and information! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More How Do I Find My Model Number or Product Number? I grasp that you have a HP 15 notebook and you recently upgraded from Windows 8. to 8.1. Now after you enter your Windows password you get a black screen with a cursor. Here is a link to HP PCs - Black or blank screen with blinking cursor after entering Windows password. To say thanks for responding please click the thumbs up icon below. If this solved your difficulty please tell people by selecting solution provided. Best of Luck!

Blank filtered view after upgrade of CRM and SQL server

We have upgrade our CRM system to CRM 2015. We also upgraded our sql server to the latest version. We used a backup of the database on the old sql server to update the new database. All works fine except for custom reports in SSRS. It
seems that although the tables return the correct value, the filtered tables return null.
Christo Vermeulen

Have you tested this by querying the filtered views directly from SSMS? If so, be sure you are connecting to SQL using windows authentication. SQL authentication will always return null when querying filtered views.

Blank black screen after upgrade

Ready for chucking BT Vision box through the window. Ever since BT Vision upgraded earlier in the year it keeps shutting down and restarting for no apparent reason, sometimes up to six times a day. Sometimes it goes for days with no problem. The current problem is that yesterday it shut down and restarted with a message that it was going to install a new upgrade. It then went through the process of downloading an upgrade tool. At the end it displayed a message that the download was successful and it would now begin installing the new upgrades. The screen then went black with no error message. It would not respond to any commands and wouldn't switch off. I tried forcing a restart and switching off and unplugging everything and restarting the hub to no avail. All it does is go through the whole routine again with the same end result. I tried leaving it in that state overnight, thinking that it might update or correct itself through time but still the same. It just sits in the corner of the living room staring at me malevolently.

In the end we gave up and did a factory re-set (left and bottom button) so lost all our recordings - what a stupid system!
We had tried every method of resetting and rebooting before then and nothing worked. Plugs in and out, hub rebooted, black adapters reset, power cables in and out, OK and bottom buttons etc and every time when it restarted it downloaded new software (or so it said) and then kept rebooting until every time it just stuck on a black screen which we seem to have spent hours looking at since Wednesday!!!
Anyway all is working OK now - fingers crossed - just no recordings to watch. I'm trying not to think of all the lovely interesting programs I had saved for a 'rainy day'.

Problem with loupe view after upgrade to LR 2.3

Has anyone had any problems similar to this? I could use some help. In the library module when I go to loupe view I don't see the selected photo, instead it gets frozen up or something. For example, if I open up a web browser on top of LR the image of the web browser is stuck in the loupe view. Any help would be greatly appreciated!

Thanks for your reply.
I can try with 1.5 (not installed on the server), but this is from the readme file:
1) To use APEXExport, a JDK of version 1.4 or greater must be used. Additionally, the Oracle JDBC
20 class libraries must be in your CLASSPATH.
So apparently, the JDK requirements didn't change.
Matthias

Color picker tool not working after upgrading to Lightroom 6.0I

I had Lightroom 4.4 and I upgraded to Lightroom 6.0.1.
mine is a standalone version and not creative cloud version
After upgrading, color picker tool is not working properly.
I am unable to pick color from image

Hi dheerajm35482857,
It seems that turning off CPU in preferences solves the problem, see: LightRoom 6 color picker bug.

Any performance gains after upgrade to Oracle 10 ?

Hello,
we have been using EBS 11.5.9 (with Oracle 9). Does anybody see any improvements from performance point of view after upgrade to Oracle 10r2 (but without upgrade of EBS to R12) ?
Regards

Somethings have been faster for us and somethings have been slower. In general it seems the same or better. When we get a chance to look at the jobs that are performing poorly I'm sure we will be able to make them perform. Make sure you find and apply all of the performance patches for the modules you have implemented, we are missing one right now and it is hurting our Configurator developers instance. I have actually set the the optimizer_features_enable back to 9i. This is something I would not recommend doing in a production environment, and we are only doing it until we can get the patch that fixes the optimizer in 10g applied.
One surprise for us was the increase in memory required, in our test and development instances we have found a 1GB SGA is as small as you can go with 10g and still have reasonable performance. We had a number of 9i ebus databases around 300-400MB SGA that performed just fine. This limited the number of environments we could squeeze on a single server (not really a bid deal if you only have a few dev, test and training environments).
In our production environment in order to have the same size datacache more memory was consumed. Were we could get away with a shared pool of 4GB under 9i, it grows to over 6GB in 10g. Looks like more PGA is also being used. 10g along with RUP5 and upgrading the java from 1.3 to 1.5 has increased our memory consumption. We increased memory from 64GB to 96GB and we are using a large portion of the additional 32GB. We were right at the limit with 64GB in our 9i production instance but we had never experienced the paging that we did with 10g. Now at 96GB we nolonger see any paging.

I cannot view my videos after upgrading to OSX

I cannot view my videos after upgrading to OSX. Each video I try to open the message on the black background is Blocked Plug-In. In system preferences I have the latest Java but Flash Player does not upgrade to Flash 12 after numerous attempts.

HI MortenEJ,
Thanks for your responce.but already done doing "Restore factory settings" .. and when Im doing "back up from" ..
I still encounter the same problem. I have important messages in my inbox I want to keep.
I even try to upgrade to the newest version. IOS 5.0.1. but still the same..My main problem is my contacts. I dont have "+" add contact button and inside each contact.. I dont have the "edit" button..

Motion screen is completely black after upgrading to Leopard

Hi,
I have opened IDVD for the first time after upgrading to Leopard and it does not work correctly anymore.
The motion screen is in black and does not show anything (while you can hear the sound of the theme selected)
This happens with already created projects and new projects
All since upgraded to Leopard
It is possible to see a movie in an already created project, if you are able to go through the menuscreens and select the movie without actually seeing anything. Than the movie is shown correctly.
I work with the latest version of Leopard and IDVD, all on a macbook
Hope you can help !!
Thanks a lot
Marco
(A recently convert from windows to Mac, and a very happy one.)

Hi,
Thank you very much for your quick answer.
I have no issues with laptop being to warm as it happens just after starting to work the computer
I have reinstalled IDVD, made no difference
I have run the apple´s updater.
No external FW or USB connected
Only two plugins for QT, both standard
I have not tried switching accounts, as I only have one account
Enclosed the info of the graphics card
Intel GMA 950:
Chipset Model: GMA 950
Type: Display
Bus: Built-In
VRAM (Total): 64 MB of shared system memory
Vendor: Intel (0x8086)
Device ID: 0x27a2
Revision ID: 0x0003
Displays:
Color LCD:
Display Type: LCD
Resolution: 1280 x 800
Depth: 32-bit Color
Built-In: Yes
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Display Connector:
Status: No display connected
Hopefully you can help !
Thanks a lot
Marco

Form colors all different in 9i after upgrading

After upgrading my forms from v6 to 9i, when I run them through 9ias, the colors are all different from what they were when it was client server. The colors are also very dark.
A related question, I setup the applet to be 600x800 in size, but my main screen isn't this big. The window where my main screen is located is fine color wise, but the rest of the applet window is black, which makes things look really dark.
Any suggestions?

Hi Jim, we spoke last week about your report server questions. I hope you were able to get those worked out.
To tweak your forms colors, make some changes in the formsweb.cfg file located in your Oracle_home/forms/server directory of your Business Intelligence and Forms part of the installation. Creating your own graphic for the background (we used white) can help lighten the screens some. Also, change between Oracle Look and Feel and Windows look and feel and see which you like better. Since we run Windows XP on all our desktops, we found the Oracle Look and Feel more closely resembled that. You can also play with the different color schemes in that file. We are using teal and that has satisfied most of our users.
Hope this helps,
Deborah

Black viewer after upgrading color to 1.0.4

Similar Messages

Maybe you are looking for