Black & White Apple Logo Lockup w/2.02

Hello all,
Eagerly updated from 2.00 to 2.02 yesterday in anticipation of never seeing the ATV locked up again with that darn Black & White Apple logo.
Came back from dinner this evening, the TV was off but the ATV had been left on playing music. Turned on the TV and got a few seconds of the ATV screen and then WHAM! that blasted Black & White logo again with the unit locked up. No bloop sounds or nothing from it.
I know this was discussed quite a lot months ago when discussing 2.0. Did not they not include this major problem in the bug fixes for 2.02?

wd5 wrote:
I do appreciate the nice response Winston.
but is it possible, perhaps, just maybe that it is not a problem with the specification or all these different devices that the ATV is attached to out there in the real world but an actual Apple problem?
Yes, it's entirely possible, in general though there are other devices which have problems with HDMI so it's not just an  issue.
Does this auto wake up feature actually work for anybody out there? I tried it with mine and the ATV stays asleep when I switch to that HDMI input on my TV.
Doesn't do it for me either, but quite a few have reported that this is so for them, I've also seen threads from some who's tv changes to the HDMI channel when the tv is activated. It could well be a symptom of an issue though if you take the view from your first point.

Similar Messages

Ipod Touch frozen - white apple logo on black screen

Today - after downloading a couple updates to Ap's - my touch mysteriously went to a black screen with white apple logo.   I have been searching everywhere for solutions - and theone of holding the home and on-off button for 20seconds gets it to turn off and then come back to the same screen. I can't get it to do anything but this?
I have tried it while connected to my macbook pro and without it connected. I have all the latest software (except I haven't updated to lion yet after bad reviews!).   Help me make this come back to life?
Thanks!

Today - after downloading a couple updates to Ap's - my touch mysteriously went to a black screen with white apple logo.   I have been searching everywhere for solutions - and theone of holding the home and on-off button for 20seconds gets it to turn off and then come back to the same screen. I can't get it to do anything but this?
I have tried it while connected to my macbook pro and without it connected. I have all the latest software (except I haven't updated to lion yet after bad reviews!).   Help me make this come back to life?
Thanks!

Black screen with white apple logo won't go away! Help please.

Last night I turned theipod completeley off and restarted it. The black screen with the white apple logo came on and hasn't went of since.
I've tried everything I could find in the forums and on the support page.
iTunes will not recognize my ipod which has continously tried to start up again every 5 minutes.
I don't know what more to do, ANY help would be greatly appreciated.
Thanks
Dana

I did try that. When I do that the red slider bar to turn the ipod off doesn't come up.
Its still trying to reset itself but won't go any farther than the black screen with white apple.
Thanks

Iphone is stuck in black screen white apple logo.Help!

I had a notication to update my IOS so I let the update run from my phone. Now my phone is stuck on black background with white apple logo. It has been this way for about 45 minutes. I tried connecting to itunes. Trying to restore my phone. Tried turning it off and on. Nothing is working. I have it plugged in right now and I am holding down the power and home buttons, it goes black for a couple seconds and then the logo pops right back up. Any advice?? I can't get the phone out of this screen.

You may have to place the phone in DFU mode and restore to factory condition using iTunes. Search the web for the procedure.

My IPhone 3GS JailBroken turns on but shuts off then the black background comes up with white apple logo? And then turns on again? Does it over and over! HELP!

My IPhone 3GS JailBroken turns on but shuts off then the black background comes up with white apple logo? And then turns on again? Does it over and over! HELP! Why Does This Happen And Is This Repairable?
Let Me Know! Cheers
Ryan Crawt
[email protected]

Its against the forum TOS to talk about J/B phones. you will have to use google to resolve your issue.

My I Phone 5 Screen shows bright white apple logo on black background continuously

My I - Phone 5 is continuously showing white apple logo on black background. It started this morning after my phone was charging overnight.

Try a hard restart, hold down the HOME button and the SCREEN LOCK button simultaneously until the screen turns off and release only when the Apple logo reappears.

My iPad is stuck on the black and white apple logo

I tried to put my pictures from my ipad on my computer and then all of a sudden the battery died and now when i try to charge it up it gets stuck on the apple logo. I have tried to reset it by holding the home button and power button, but it does nothing but stay on that black screen with the white apple logo!! SOMEONE PLEASE HELP!!!!

Did you try to connect in recovery mode, explained in this article?
If you can't update or restore your iOS device

White apple logo screen does not appear instead screen is black. Eventually boots to login screen. Slower startup.

When I turn on my MacBook Pro 15 inch 2011, the screen does not turn on until login. Also startup is slower than usual.
I turn on the computer and it makes the optical disk noise.
The screen reamains black until the login window appears
White apple logo screen is missing.

Greetings,
Reset the SMC and then test: http://support.apple.com/kb/HT3964
Reset the PRAM and then test: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
If the issue persists follow: http://support.apple.com/kb/TS2570
Cheers.

Ipad 4 frozen during update ios 8.1.3. - did anybody know how to restart (or reset) my ipad4 from black screen with white apple logo?

ipad 4 frozen during update ios 8.1.3. - did anybody know how to restart (or reset) my ipad4 from black screen with white apple logo?

Hi there did you end up getting this resolved? I have the same exact same issue with my Ipad 4 when updating to 8.1.3....frozen on the apple logo. Tried resetting as advised by other users but just goes back to the same logo. Tried connecting to iTunes but device is not picked up at all. Left it over night to run flat hoping charging might kick start something....but when I put on the charger it shows the battery charge icon but won't actually charge it. It's really doin my head in trying to find a fix - cheers Morgan

How to unlock an iPhone 5 when it crashes with a plain black background and a white apple logo , the only feature that is working is zooming in using taopping 3 fingers

dear apple users
i was opening my bbm on my iphone 5 then it crashes , i thought it was only a crash , it was the screen of a black plain background and a white apple logo , i was waiting for around for 1 minute then the screen never showed the lock screen . it was never unlocked for 1 hour , now it is still unlockable .

Hi there bencong111,
You may find the troubleshooting steps in the article below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
-Griff W.

IPhone 3GS Crashes (gets Black Screen with White Apple Logo) Mid Phonecall

For the past week, when I make a phone call and use the speaker, after the call has lasted between 8 and 12 minutes; without warning, everything goes quiet and I get a black screen which displays the white Apple logo (the same as is displayed when you reboot your phone).
After a while, the phone comes back on, I’m not required to enter my SIM Pin and everything seems to work fine(ish) from then onwards.
I have done a reset, restore and resync in iTunes, but this still happens.
It does not seem to matter if the battery is 100% charged or not! I have tried a few battery recalibrations too!
I’ve also noticed a slight sluggishness since the upgrade to iOS4 (for example, when you receive a text message, click to view, there is a noticeable delay where the screen is blank (you can see the lines where messages should be) and then they appear/message opens).
Any ideas?
Cheers in advance.

Hey Mac Beep Beep,
As did many out there on iOS4 release day, I plugged my iPhone into the PC, iTunes fired up, the software upgrade was found and installed.
Three iPhones updated in my household, all the same model (3GS 32Gb) and yet none of the others have had the same problems as mine.
On top of having the reboot during phonecall issue, my calendar (historic and future) was wiped, birthdays were added to the calendar from the information held in contacts however some (not all) were showing as a day earlier then they should be (even though they are correct in the contacts entry).
Just to clarify, when I tried to reinstall a verified version of the legacy backup (3x), I used iTunes to reset iPhone, re-active iPhone and restore said legacy back up. This failed in a spectacular way so I had to go back to an iOS4 back up.
Note: I had the problem of phone rebooting mid phonecall before I attempted a rollback to 3x.
Any further advice/ideas?
Cheers

IPod Touch 2G 32GB with White Apple Logo and Failed Restore / Recovery

My Specifications:
iPod Touch 32GB 2G
iPhone OS 3.1.3
2.8 Ghz. Intel Core 2 Duo iMac
Mac OS 10.5.8
iTunes 9.0.3 (15)
Problem:
After updating my iPod Touch to OS 3.1.3, my iPod touch started having sync issues where it would say the sync failed. The backup files stopped being created and the latest version was over two weeks old (from prior to the updated to 3.1.3). After an application became unstable and crashed frequently, I tried to do a reboot by holding the Power & Home buttons until the Apple Logo appeared to begin the reboot process. After waiting for 6 hours, the ipod still had not rebooted but was frozen on the White Apple Logo screen.
Troubleshooting Steps I’ve Take:
1. Attempted to follow Apple Frozen iPod Touch and Common Issue Troubleshooting Guide. The iPod will not shut down using the Power Slider function.
2. Restore via iTunes using the DFU Restore Function (Power Button & Home Button for 10 seconds, releasing the Power Button, followed by plugging in the USB cable while holding the Home Button down). iTunes recognized the ipod at the point and began the restore process. The process took almost 32 hours and when it was completed, the ipod would not boot up by remained with the White Apple Logo. My original attempt was with using a powered USB hub.
3. Repeated the restore process but by plugging directly into the computer and eliminating all USB devices except keyboard and mouse. Deleted the OS 3.1.3 updated and made iTunes download the file in case it was corrupted.
4. Rebooted computer between each attempt.
5. Deleted iTunes and the Apple Mobile Device Services as per Apple Article HT1747. Rebooted the computer and reinstalled iTunes. iTune would not recognized the iPod Touch to do a restore using the DFU method. I’ve retried various timings and versions with the cable plugin, booting with the cable plug in and not plugged in, etc... No effect.
6. Repeated the above steps on a MacBook Pro running OS 10.6. iTunes wouldn’t recognize the iPod.
7. Repeated the above steps using a different sync cable. iTunes wouldn’t recognize the ipod.
8. Unplugged the iPod and let it completely drain until the screen went blank for 1 day. When pressing home button the Low Battery / Plug In warning appears. Recharged the battery using a wall plug for 12 hours. Retried the above steps. No change.
What I’ve Eliminated As The Problem Via My Troubleshooting:
1. Computer Hardware
2. iTunes Software
3. Sync Cable
4. USB Conflicts
What I Need Is A Solution:
1. Completely wiping my ipod is an acceptable solution at this point. I’ve spent a week working on this and wasted way too much time. Is my iPod trashed thanks to an OS update?
Any help or suggestions would be greatly appreciated. I've ready each forum posting involved White Apple Logo Issues and have come up empty. Am I the only persons would is having trouble restoring?
Thank you,
Paul

More Troubleshooting Steps For Your Consideration:
I was able to restore back to iPhone OS 2 by using a laptop that had not been synced with my ipod touch previously. When I did the DFU with it, iTunes downloaded OS 2 and it worked.
Then I went back to my iMac and proceeded to install OS 3.1.3 and that seemed to work ok too.
I've been getting the white apple logo of death, however, when I try to sync applications. All seems well, but as it is finishing the ipod touch reboots to the White Apple Logo Screen and stays there. iTunes seems oblivious to this taking place.
During my second rebuild starting with OS 2 and then updating to 3.1.3, it worked again. When I tried to add apps, I only put on a dozen. That worked too. I did get the White Apple Logo Screen of Death once again and I did the third sync to get the rest of my apps in place.
I'm on the third rebuild from version 2. I'm going to try to use an old file I have of 3.1.1 instead of 3.1.3. Also, I'm going to add one application per sync. At least this way I might be able to find out if it is a specific app that is causing the problems.
In my further research, it appears that this bug has been in place since the early days of iPhone OS 2.
All told I've spent over week with my computers tied up working on this problem. I think it would have more cost effective to just buy a new iPod. (I'd rather wait for the 4G version this fall!).
Just in case anyone else has been having issues, that is where I'm at. I'll let you know if I figure this issue out in more detail.
Thanks,
Paul

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My IMac is frozen with the screen white apple logo appears and spinning wheel. Long empty rectangle is under the spinning wheel?

My IMac is frozen with the screen white ,apple logo appears and a spinning wheel under it. A long empty rectangle empty appears under the wheel and is empty.

Your iMac is trying to go into safe. This usually happens when it has detected an issue with the OS or file system.
Follow the steps outlined in http://support.apple.com/kb/TS2570

HT4061 had new ipad air 5 hours, got message to update ios, started, screen went black with apple logo, over two hours, cannot shutoff device. seems locked, no response.

new ipad air 5 hours ago. got message ios update available. i started install, screen went black with apple logo, has been "frozen" over two hours with no apparent activity. cannot use Home button or Sleep wake button. how do i restore original ipad start? what is ctl alt delete equivalent?

Thank u, this reply helped.
SergZak
Currently Being Moderated Re: black screen wont turn on
Oct 10, 2013 3:44 AM (in response to Apfelwurm)
The following is how to do a proper reset of an iDevice:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Black & White Apple Logo Lockup w/2.02

Similar Messages

Maybe you are looking for