Black & White photos printing as purple

My wife was copying some historical black & white family photos. Six or so printed fine, then one photo changed from black & white to a purpleish tone at the 90% complete phase, only the bottom edge had changed colors. We loaded another black cartridge believing this was the cause, but to no avail. Now all Black & White photos are printing in purple.
Standard printing is fine.
Copying is fine.
Scanning is fine.
But photo printing of black & white pictures results in the copies being 100% purple toned.
Why?
HP 6510 printer, only two onths old.
This question was solved.
View Solution.

The printer uses color ink to print black when printing on photo paper because the pigmented black ink is not compatible with photo paper. It appears you have run out of yellow ink. I would suggest the troubleshooting steps in the document here to resolve the issue. Be sure to check the vents on the yellow supply as shown in solution two.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Black and white photo prints with purple cast

I used Photoshop to convert the digital photos to black and white before placing them in Indesign CS3. On the monitor the photo looks great, but when I print the newsletter, each photo has a purple tint. What am I doing wrong? Thanks.

Polly,
your black and white photos are probably 'Grayscales'.
The print has a tint because it is printed by rich black
CMYK instead of K-only, and the printer is not perfectly
calibrated or not calibrated at all.
a)It is a PostScript printer and it was chosen
Output=CompositeRGB instead of CompositeCMYK or
CompositeGray (CompositeCMYK is necessary if the
doc contains Grayscales and color images).
Composite### doesn't mean the source but the printer.
PostScript toner printers and inkjets are CMYK devices.
Desktop printers are often considered as RGB devices.
b)The Grayscale was converted back to RGB (still gray though).
c)The Grayscale was converted to CMYK, which delivers in
Photoshop by default rich black CMYK.
Best regards --Gernot Hoffmann

Just purchased a Photosmart Plus B210a cannot print a black & white photo, coming out green.

Just purchased a Photosmart Plus B210a cannot print a black & white photo, coming out green.
This question was solved.
View Solution.

This would indicate your magenta ink is not printing properly. Try the troubleshooting steps in this page.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Black & white photo has a magenta cast.

New HP Officejet Pro 8500A, using the recommended HP brochure paper 180g glossy. I'm trying to print borderless and have set up the print options correctly. I am getting a magenta cast only when I print a black & white photo.
Brand new ink, and I have already tried aligning the printheads.
I was getting muddy prints using non HP paper, so bought the HP paper and now have this magenta issue.
I am using Windows Vista.
thanks for any help.
Barbara Smith

I have same problem. Did you find a solution?
Ira Scheinerman

Is there a tutorial on how to achieve Black/White photos with color details?

I am newbie with learning photoshop, Is there a tutorial on how to achieve Black/White photos with color details? similiar to this photo?
thanks

Type exactly that "black white photos with colour details with Photoshop" when searching online and you will find many examples on how to achieve this effect.
Examples:
Photoshop combining color with black and white - A non-destructive method - YouTube
How to Create Color Splash Effect | Adobe Photoshop cs5 - YouTube

Black & White Photos to not appear in iPhoto

I added several black & white photos into the library of iPhoto along with many color photos, but none of the black & white show.
Each of the B & W have a black place holder but it is totally black. If I click a photo, it displays as a ghost image lacking detail.
I originally edited these photo scans in Photoshop and saved them as a jpeg image without layers.
Any ideas?
Thanks in advance

I had same problem. I scanned and saved as greyscale, imported and then they show up as black in preview, etc. Is there any way to change the photos that I have already scanned and saved without having to scan all of them again under the new profile?

3G Black & White photo

Hello,
When i view a black / white photo on my iPhone, it will turn into a mess. When i leave me finger on the screen the photo will be ok. When i don't do that i get a photo like this:
http://img209.imageshack.us/img209/967/img0006yg1.png
Can Apple fix the problem?
And have more people the problem?

I have same problem. Did you find a solution?
Ira Scheinerman

Canon EOS 6D - Black & White photos

Hello, With my current camera (Canon Powershot IS 50) I can do black & white photos but tell the camera which colour should remain (so for example I can do pics where all the photo is black & white but the red colours stay red, etc.) I would like to do the same thing with the EOS 6D, but cannot find how to do it. Sorry I am a completely new user of the 6D. Thanks for all hints !! Michael

If you mean something like this, it is a little more involved. I was/am not aware of any camera that does this. If you are just asking if you can use "filters" on a color photo to make a certain look on B&W, it is much easier.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1?

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1? WINDOWS 8.1 recognizes I have printer attached, but it says flatly "No driver!" I have run all the drivers from CANON and then attached the printer. But, still it doesn't work! Nothing from CANON sez" SETUP...........

Hi mybrojer.
I will be glad to assist you.
The file that you download from the Canon website is .ZIP file. When you select [RUN], it unpacks the setup folder. Please disconnect the printer from the computer and follow the instructions below to install the printer:
Open your [Downloads] folder.
You will see two icons with the name: MF4350_MFDrivers_W64_us_EN.exe. Double-click on the yellow folder icon with this name.
In the folder you will see two listings for [Setup]. Double-click on the [Setup] that has the type as [Application].
The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.
After restarting the computer, connect the USB cable and allow the installation to complete.
Print a document.
I hope that this information is helpful to you. Should the error persist, or your need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My iPhone only takes Black & White Photos?

Out of the blue, my iPhone will only take black & white photo's in Photo mode. Color will appear in the Video, Square & Pano mode. How do I fix this? (I did not download any apps & I tried rebooting to no avail.)

Thank you for the hint.
A filter is just a property. Deactivated it you will be shown the original.
The filter colors are not rendered into a photos file, the photo's data keeps unchanged in the camera roll.
For example: you shot 100 photos of an important event. You take a look at the camera roll and see many photos in weird colors, because you accidentally activated a filter. You can simply select this photo, deactivate the filter and get back the original.
Did You mean this?

I am scanning black/white photos and making a few adjustments - retouching and cropping. The photos then turn red. Why?

I am scanning black/white photos and making a few adjustments - retouching and cropping. Some (only some) of the photos turn red. Why and what do I do to correct this problem?

This is because we've scanned the photo's using grey scale.
Through further searching I found a solution thanks to Terence. You can convert your already scanned photos to the required sRGB format by doing the following:
Open Automator. Select your photo's that need converting from the file and drop into Automator.
You can create an Automtor workflow to assign an sRGB profile to images.
The variable you want is 'Apply ColorSync Profile' to images and then select sRGB from the drop down.
Hope this helps!

Hp photsmart 309a black and white photos print purple

When I print black and white photos they have a very purple tint. Any suggestions?

If Photoshop manages color, you need to pick the correct profile for the printer/paper. The profile will be called something like e.g. <printer name> Epson Premium Glossy, if that's the paper you're using.

Printing a black & white photo

Hi all,
I'm not sure whether this is the right category but here goes.
I have scanned an old photo using my HP Photosmart C4580, into Photoshop and changed the now, sepia colours to black & white which is fine.
The problem arises when I then try to print it on the same printer, as it doesn't come out black and white, it is printing with a distinct blue tinge so obviously it is not using the black cartridge but is trying to cobble something using the colour cartridge.
Is there a means of forcing it to print in black & white, i.e. ONLY use the black cartridge.
Before you ask, I am on WIndows XP SP3 (which I don't think should make any difference) and I haven't tried removing the colour cartridge as I have a feeling that it might complain that it is missing a cartridge and then possibly get stuffed up when I put the colour cartridge back in.
Any suggestions would be much appreciated.
Regards

OK, there are a few issues here. First, the cartridges are regionalized and there are four different regions and cartridges and printers are not compatible across the different regions. If you bought the printer in the UK and moved to New Zealand then you will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
As for the color vs.. black vs.. photo cartridges, your printer can use several different combinations. The cartridges are as follows:
Black: Contains pigmented black ink. This is excellent for plain paper text but is not compatible with glossy photo papers. The drop size is ~3x larger than the color or photo drops since this cartridge is optimized for text. When photo paper is selected this cartridge will not be used.
Color: Contains cyan, magenta and yellow dye based ink. The dye based ink is compatible with plain paper or photo paper.
Photo: Contains light cyan, light magenta and black dye based inks. Used in conjunction with a Color cartridge the combination can give more detailed B&W prints and less "grainy" light areas such as color sky and face tones.
For your case a working color cartridge would likely print fine B&W photo's, but if you did a side by side comparison with a print made with the color and photo cartridges installed you may see an improvement.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Black and white photo printed sort of pink...what's wrong

I have a HP 7520 Photosmart all in one printer. Has been printing fine until today. I was trying to print an old black and white photo. It came out sort of pink. Have tried all the tips I could find. What is wrong?

The black ink is pigmented and not compatible with photo paper so when printing on photo paper only the color and photo inks are used. A pinkish result would indicate that cyan is not printing properly. The troubleshooting steps in the document here may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Black and white photos print greenish tint

MacBook Pro 2.7 GHz Intel Core i7 16GB Retina Display. Epson Stylist Photo R320.
When I print Black and White photos that were selected as Black and White in Photoshop, they all print the 50% grays with a Greenish tint. it's like it wants to add missing colors. I changes All the inks and it still occurs. "Photoshop manages colors" profile, "sRGB IEC61966-2.1 Normal Printing. Relative Colorimetric. Using Photo paper.
Can anyone tell me why?

If Photoshop manages color, you need to pick the correct profile for the printer/paper. The profile will be called something like e.g. <printer name> Epson Premium Glossy, if that's the paper you're using.

Black & White photos printing as purple

Similar Messages

Maybe you are looking for