Blackberry 10.2.1 official update on my Q10

Does anyone have the Verizon Blackberry 10.2.1 official update yet?
My phone says it has the "latest" software upgrade of 10.1.0.4189.
The Blackberry website says the upgrade is available to carriers.
Please help Verizon!

I am also having a problem updating my Blackberry Q10 serviced by VZW.
I was informed by a developer that wanted me try his latest app it required the 10.2 upgrade. That was Saturday 2.1.14. Since then I have been looking for the 10.2 update for my device, which states I already have the latest update: 10.1.0.4189.
Today I decided to do a complete wipe, after fully backing up of course, when Blackberry Link also stated I had the latest update. After a successful wipe and reinstall to Factory settings the device kept updating. Latest, according to the device? 10.1.0.4189.
Then I attached it to my desktop and connected to Blackberry Link. Search for latest update: result? I already have the latest. 10.1.0.4189!
How can I get the latest official update installed on my device? I tried everything that is in the book, so to speak. I would hate to go draconian and go to a site such as Crackberry, as good as that site is, to get an update the provider apparently has available but the applicability, and thus its download and installation, is not recognized for my device either over the VzW network or through Blackberry Link.
Open to all suggestions.
Thank you, in advance,
Don L

Similar Messages

Will I get an official update of Andriod 2.3 GingerBread for Sony Ericsson W8. Or should I thorow it. :(

Hi All
Will I get an official update of Andriod 2.3 GingerBread for Sony Ericsson W8. Or should I thorow it.
Solved!
Go to Solution.

would u like to do an experiment with your phone (better than throwing), install a custom rom, and u will be able to update to android version 2.3.7
u need to root your phone
it could void your warranty, might damage your phone, phone may get bricked,,, etc etc
i am not responsible for anything
the video is bad, description might help http://www.youtube.com/watch?v=LxJNy07hwjQ
another one,,, video is good,, http://www.youtube.com/watch?v=iiC9OGJymLg&feature=related\
installing custom roms is however for advanced users and developers
Discussion guidelines.
Message me or any other moderator to seek help regarding moderation.

Any official Update for Flex Builder 3 to use Flash Player 10 Api?

Any official Update for Flex Builder 3 to use Flash Player 10
Api?
How can i use flash player's 10 features in flex builder 3?
Thanks

I was able to solve my problem by modifying the solution
offered in
this
technote.
The technote identifies a permissions problem with the
components directory of non-Safari browsers. In my case the
permissions problem appears to have been in the main
/Library/Internet Plug-Ins directory. What tipped me off to the
solution was the fact that after manually removing Flash
Player.plugin and flashplayer.xpt from the /Library/Internet
Plug-Ins directory, subsequent attempts to install Flash Player
resulted in the "Creating file: 1008:5, -5000 Access Denied Error"
I remembered seeing in the technote. Before removing these files,
the installer would just fail silently, perhaps because it saw
files it was going to install already living in the right place,
and furthermore had no permissions to alter the directory.
In any case, by making the permissions change recommended in
the technote to the /Library/Internet Plug-Ins directory, I was
able to install the plug-in, which gave me back access to Flash
content in all my browsers.
Hope this is helpful to someone else...
-Erik

10.2.1 Official Update for the BlackBerry z30

Hello, First off...I have a BlackBerry z30 which I had to purchase unlocked to run on the T-Mobile netwrk because I really wanted the z30 and T-Mobile is not carrying the z30 online or in retail stoes. Now I am running the 10.2.1.1055 leak and it runs decent but I know at some time T-Mobile will release the OTA official release of 10.2.1 for the z10, but since they do not carry or support the z30, what would be my options for installing the official 10.2.1 version on my phone. I do want to at some point run the official stable version of 10,2.1 on my phone. Any suggestions would be greatly appreciated.

The manual autoloader method I mentioned a couple posts above...
Upgrading OS10 devices using Autoloader
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Bold 9900 OS software update from version 7.0.0 to version 7.1.0

Helo Everyone
I tried to upgrade my Blackberry Bold 9900 device software from version 7.0.0 to version 7.1.0 but having difficulties. I tried using the Blackberry Desktop Manager but there was no version 7.1.0 listed among the available updates. Even when I tried to do it directly via the Blackberry official website, Version 7.1.0 was also not listed. Finally I tried to do the update with my phone directly by accessing: Options>Device>Software Updates.
It displayed my Current Version of 7.0.0 Bundle 2406 and an available version 7.1.0 Bundle 1149. But when I Clicked Perform Update to download the new version it showed preparing to download but then displayed an error message such as "The download cannot continue because your device cannot connect to the update server using any of the following methods:Wi-Fi".
Meanwhile, I did not perform the upgrade with Wi-Fi because I have an active blackberry data subscrip of 2GB from my mobile network provider.
Please I need help on how to perform the upgrade from version 7.0.0 to version 7.1.0 with the latest Bundle.
Thank you all as i await your kind solution.
Solved!
Go to Solution.

Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Desktop software fails to update v7.1.0.42 (The lastest version)

Hi,
I have been unable to update/upgrade my Blackberry destop software to the latest v.7.1.0.42. I have downloaded the installer from the official blackberry website. During installation, an error message pops up saying something about a missing .dll file, or what-not, and that the missing file is critical to the update. Thus, the installation process just rolls back.
Can someone, please, help with this challenge.
By the way, I use a Windows 7 laptop computer.

Hello Glassroys,
To better assist you with this issue can you please provide the full error message you receive?
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Blackberry 9860 frequent crashes after update!

After Wiping my Blackberry 9860 Phone and reinstalling the latest Phone software from Vodafone using application loader with the vendor file deleted, the phone worked for 5 minutes, and froze then crashed, when i did a hard reset, it got stuck while loading and sat there for hours, i had to run the Loading process again using the application loader, then wipping with BBSAK, and reloading the OS with application loader,but same issue repeats itself, now my phone is totally useless as this crashing process keeps repeating itself.
Please any help would be appreciated, thanks in advance.

Hello!
If you wish to continue trying diagnostics, you may want to try this tedious procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Playbook 4G LTE Software update.to 2.1

Further to my post 2 weeks ago.
I like my BB PB but:...........................
1)Wish that Rogers had told me at my no contract purchase, or someone at Blackberry, after two weeks of fooling around with it, that I had to ALSO buy airtime with Rogers (After paying the $549.00 plus tax ) to get updates.
2)BTW, Rogers has not got LTE in my city, only 4G. I have just connected with MTS, (only LTE ISP), here in Winnipeg Manitoba and the speed of the LTE is great, blinding fast. However since this 4G LTE is BRANDED (according to BB) with Rogers , no 2.1 update is available. (Yes they do say that on the website now).
3)After speaking with a person(a BB support adviser(East coast of Canada) I found out that they do have many unhappy customers and they are working on future changes(No good for me now).
4)Next step,
I will get a sim card at Rogers, and see if I can get the updates.
Hopefully all this is not a waste of time.
By the way I am getting the following error whe I try to connect via LTE on my LTE carrier
"There was an error conneting to the update server. Please try again later (65792)"
Not happy with all those phone calls I made, their support group is not technical and reads off the script, (to be fair thats what most companies are doing),, and BB has not returned my emails asking for asistance. in two days.
Would be nice to speak to someone at BB for problem solving
Solved!
Go to Solution.

Yes, finally I have the 2.1 update. Actually was pretty much what Blackberry had stated, although I found it hard to belive they would actually force people to go to the provider that they bought their 4G LTE from. Never the less, the 4G LTE I have has the lates updates. Solution was after all, going to Rogers where I had bought the 4G LTE from (bought without contract), and getting them to put in a Sim card, signing up to a monthly plan.then just hooking up my USB cable to my desktop and doing an update through the Desktop.The integral part being the activated Sim card from Rogers. So praise be. Its done. Thanks all for your assistance.

Sent from my Blackberry missing after 10.2 update

I have updated to the latest Z10 OS: 10.2 However since then the 'Sent from my BlackBerry' signature is missing.on emails. Anyone know how to get it back. Thank you. Henry

Go to the Hub, tap email account, tap the three dots, tap Settings, tap Email Accounts, tap your email account, turn Auto Signature On, if on and the box below is empty tap the empty box, type what you like. Tap anywhere to close keypad, do not press and hold the spacebar like in texting to close the keypad it will put a space in what you typed or what is written there.

Blackberry Bold 9650 OS 6 update email setup error

Hi All, I recently updated my Blackberry Bold 9650 to operating system 6. Ever since I can not access the email setup on the phone! I contacted verizon and they said they have had numerous calls on this. They had no fix except to go online to the VZW/Blackberry site to manage my email accounts. Does anyone have a solution to this error/bug? I used to be able to do this from the phone prior to the update! Thanks!!

Hi,
It sounds like you need to reload your device's software. Before you do anything else, backup your data with Blackberry Desktop Software. Make sure you have any serial numbers, etc of any 3rd party apps written down. When you are ready, perform a security wipe of your device. To perform the security wipe, do the following:
Go to Options and press the trackpad.
Go to Security and press the trackpad.
Go to Security Wipe and press the trackpad.
Now, select the data you wish to delete. I recommend placing a check in the boxes beside everything except Media Card.
Type the word 'blackberry' without quotation marks in the blank space provided.
Select Wipe Data and press the trackpad. This will initiate the wipe process.
The whole process can take anywhere from 30-45 minutes to 90 minutes, depending on how much data you have and if it is encrypted. Your device might restart a few times or may appear not to be doing anything, but do not stop the precess. Once it has completed, you will be alerted. You can then reload any of your personal data or 3rd party apps. You may not want to do this unless you have 2 or 3 hours to spend. Hope this helps.
Doc

Blackberry Media sync crashes after updating in Windows Vista

Hi, I installed Desktop Manager v4.6. in Windows Vista Business edition. When I try to use the Media Manager, it tells me that the Blackberry Media Sync is not installed and it prompts me if I want to install it. After it downloads and attempts to install the Media Sync, it crashes, it says "Blackberry Desktop manager has stopped working" and you can only Close the program or check online for solutions (which they don't give you any). Any ideas why this happens?
Solved!
Go to Solution.

Personally, I don't use Media Manager. Don't like it.
You can enable Mass Storage on your Media Card and drag and drop files to and from the Media Card quite easily.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry Torch frozen after the Update !!!!!

I got my Blackberry Torch 9860 4 months ago. I have done one update eralier two months ago. Last week on 16th there was another update and after performing the update my phone is always frozen as soon it start.
Even safe mode doesnt works.
I followed the instructions given in the Knowledge Base KB10144 and performed another update. Even after this update my phone is frozen in welcome screen.
I need some help. I have spent a lot of money on this phone. I am not at all happy with the product.
Awaiting for some reply.
Thanks.

Hello Kend487,
Please complete the following 'clean' application loading process to address the freezing issue you are experiencing on your BlackBerry Torch 9860 smartphone:
How to perform a clean reload of the BlackBerry Device Software - http://www.blackberry.com/btsc/KB11320
If this fails to resolve the issue, please contact your point of sale for options.
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Blackberry q5 stuck on software update

hello,
a bought the new blackberry q 5, i put my sim card ther with a blackberry plan, i connected it to my wi fi network and now it is stuck on software update.
it wont do the update and it goes back to the wifi connection that says its conected.
what should i do?
i have already reboot it a few times, a turn it to blackberry link but it says the phone cannot be connected before doing the update.

I am also having same problem In Dubai jay purchases phone today and stuck on software update when I am connected to my secure business wireless internet Please help with solution blackberry q5

Blackberry world saying apps have updates

Anyone else find that Blackberry World has the asterisk saying you have apps to update, but actually you don't?

Hi marcus_anselm,
When you go into BlackBerry World then click on All in the lower left corner, does the asterisk appear on My World?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

New official updated drivers from HP for Omni 10

Gone are the official drivers from HP:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4157&lc=en&cc=us&dlc=en&sw_lang=&product=6608...

Hello DayTrader,
When you connect the printer and if the message continues to say "Waiting for Connection", please try the below step..
Go to Device Manager, ( to do so , Right click on Computer icon, Select Manage, from the left pance m click on Device Manager , which would display the Device Manager on right pane.)
There should be Yellow bang entries ( Yellow ! mark ) with printer name on it.
Right Click on each of them and select Update Driver.
Select "Browse my Computer for driver software "
Click on Browse button to point to the CD ( if you are using the CD to run the installation ) else copy the path where the drivers have been extracted if you had downloaded it. Usually it will be in folder with name starting 7z... under TEMP folder .
Then Click Next button .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Blackberry 10.2.1 official update on my Q10

Similar Messages

Maybe you are looking for