Blackberry 8320 model--- purge option

Hi Team,
I am not able to find "Purge Deleted Items" in blackberry 8320 model.
Regds,
vino

Hi and welcome to the forums!
No data will be lost when doing the following: pull the battery while the device is ON. Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed.
If that doesn't work, go to the local carrier store and have them test another battery. If it turns out to be
the case, make them give you a NEW battery, typicaly they will try to give you an old one.
If not get a NEW phone not a refurbished model. There maybe a hardware flaw that has caused this.
Then restore the backup you hopefully have, and you should be good to do.
Thanks,
Bifocals
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

Blackberry 8320 Model Smartphone

I have a problem with my Blackberry 8320 Smartphone, it recently went down yesterday and it doesn't come on at all and only has a flashing red light that blinks. Please help me with this if someone knows how on this problem, thanks. I called T-Mobile customer service and all there going to do is mail me another battery and if that doesn't work, they said that they would change the phone out.

Hi and welcome to the forums!
No data will be lost when doing the following: pull the battery while the device is ON. Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed.
If that doesn't work, go to the local carrier store and have them test another battery. If it turns out to be
the case, make them give you a NEW battery, typicaly they will try to give you an old one.
If not get a NEW phone not a refurbished model. There maybe a hardware flaw that has caused this.
Then restore the backup you hopefully have, and you should be good to do.
Thanks,
Bifocals
Please remember to resolve your thread.
Put the check mark in the green box that contained your answer! Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Is it possible to access GPS service using BlackBerry 8320 Model?

Does 8320 model has in-build GPS chip?
Use Search. "Accept Solution" if the problem gets resolved.
Solved!
Go to Solution.

Welcme to the supprt frums
http://www.blackberryforums.com/general-8300-series-discussion-curve/120510-8320-google-maps-accurac...
Nurse-Berry
Follow NurseBerry08 on Twitter

Cannot Call on my Blackberry 8320 but can receive calls

I was wondering if I could get some help.
I recently purchased a Blackberry 8320 off of an ebay store from Japan. It is an unlocked phone GSM phone.
I live in Canada and I cannot make calls, it just says "Call Failed" but I can recieve calls and I can send and receive text messages.
Does anyone know what I can do to fix this?

Hi and Welcome to the Forums!
I suggest the following steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you will need to contact your carrier for assistance.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help: Latest OS version of Blackberry 8320

I can't find where to download the latest OS version of Blackberry 8320 (my blackberry is T-mobile but im here in the Philippines using globe sim card)
can somebody tell me where to DL? thx
Solved!
Go to Solution.

Device operating system releases are "released" by specific carriers once they have certified and trained their support techs, but still, you are able to load to any carrier's same model by following the instructions below.
See the link below, for the download and simple installation instructions.
https://www.blackberry.com/Downloads/entry.do?code=F1298750ED09618717F9C10EA8D1D3B0
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Model management options IN VC

HI,
Someone can explain what is model management options IN VC ?What is knowledge of Destinations and Service destinations ?
Thanks ,
Kundan

closed

BlackBerry 8320 4.5 WhatsApp History

Hi everyone!
I have a BlackBerry 8320 and love it! In fact so much so that I don't want to change to anything else. However I have a problem with an application call WhatsApp, which I'm sure a lot of you here will have used because it is quite popular. It's like BlackBerry Messenger, but I know a lot of people without BlackBerries, so WhatsApp is more universal.
Recently in the new version of WhatsApp (2.5), they added a function which allows you to view a conversation history with a particular person. However this only works on BlackBerry versions 4.6 and above. As far as I know, version 4.6 will not work and is not availble for the 8320. I contacted the makers of WhatsApp and they said that the conversation history will be stored on the device itself and not on their servers. What happens at the moment is that a limited number of messages are stored and the older ones get lost as the conversation continues. This means me having to email to myself the conversation histrory periodically to prevent any history loss. There must be a way around this. Either for WhatsApp to enable the conversation history for BlackBerry 4.5, or BlackBerry 4.6 to be made available on the 8320.
Can anyone offer any advice or suggestions?
Thanks very much,
Alicia. x

Nevermind fixed it. Got a java program that reset everything, all data not saved on MicroSD card lost, but no big deal. Phone still unlocked, 4.5 update is even on. Weird...

Constraint names - Modeling Naming Options

Can anyone advise me which group(under Model Options -> Naming Conventions) controls the max code length for the below in a physical data model.
FK Constraints
PK Constraints
UK Constraints
The context sensitive help from this window does not describe what physical objects some of these impact. For instance, I thought Reference would control FK Constraints, but it is not. I have FK Constraints being generated longer than 30 characters, which is the max that Oracle allows. Other objects is a catch all that I did not restrict to 30 as that then shortens lot of other things that I don't even know and might want to.
I tried looking in the PD Meta model help under "Libraries -> PdPDM -> Model Options", but I don't understand much of what is described there.
I have following in the Oracle 11g DBMS Resource file under the branch "ORA11GR1::Script\Objects\Reference\ConstName".
I need this so that I have FK constraints generated with a sequence number suffix. Maybe the Model naming options don't apply when this is used and I need to figure out the syntax to chop the table name so that to 24 as FK_ and _1 will use up 6 characters in the constraint name.
FK_%TABLE%_%REFRNO%

Hi Stefan,
It is still ending up generating Unique key constraint names longer than 30 characters.
I do have a rule for constraint name creation as well.
So right now in my Oracle 11 Resource file, I have this.
ORA11GR1::Script\Objects\Key\ConstName is set to UK_%TABLE%_%.U-18.1:AKEY%
I am wondering if I should change it to UK_%U.25:TABLE%_%.U-18.1:AKEY% so that it takes only 25 characters from table name and that is restricted to 30 characters max.
I also have MaxConstLen at two levels and both are set to 30
ORA11GR1::Script\Objects
ORA11GR1::Script\Objects\Key
It is getting really frustrating that I cannot get same results as I did with Erwin DDL generation. I wish SAP made it easy and had a setting for Constraint names in Model Naming options.

Got my Blackberry 8320 Curve wet..... keyboard and answer key not working

I have a Blackberry 8320 Curve (gold) have not had it to long, but I bought from a friend of a friend...... well my phone recently got soaken wet and now some of the keys on the querty keyboard dont work, by side buttons, like for the camera and voice commands and the answer key dont work... i dont know what to do or where to go from here, i dont want to have to buy another phone because it is to expensive, i love my phone, does anyone know what I can do to repair it? Do u think it is repairable?

cortiz05 wrote:
I have a Blackberry 8320 Curve (gold) have not had it to long, but I bought from a friend of a friend...... well my phone recently got soaken wet and now some of the keys on the querty keyboard dont work, by side buttons, like for the camera and voice commands and the answer key dont work... i dont know what to do or where to go from here, i dont want to have to buy another phone because it is to expensive, i love my phone, does anyone know what I can do to repair it? Do u think it is repairable?
Hi...
Pull the battery now and place the phone in a bag of rice to dry it out...
Here is another link on wet blackberries...
If the phone is already dried out, you can send the phone out and have it repaired at the component level.
There are several services that can do this. One is the bbrepairshop in Houston.
H.
Message Edited by hmeister on 10-01-2008 11:02 PM
Message Edited by hmeister on 10-01-2008 11:04 PM
+++++++++++++++++++++++++++++++++++++++++++++++++
If successful in helping you, please give me kudos in my post.
Please mark the post that solved it for you!
Thank you!
Best Regards
hmeister

Unable to Find Purge option in BPELConsole of Soa-Suite Version 10.1.3.4

We were unable to find the purge option button to delete the instances in BPELConsole page of Soa-Suite Version 10.1.3.4.
In 10.1.3.3 and earlier versions, to the Leftside of the Instance tab in BPELConsole page, there is Button "Purge All Instances" Provided under Related Task used to purge all the instances.

Please take a look at
http://download.oracle.com/docs/cd/E12524_01/relnotes.1013/e12523/bpelrn.htm#BABDEAIH

Is it possible to prevent users from using the ''Purge'' option from the ''Recover deleted items'' in Office 365?

Hi,
After speaking with a Microsoft engineer over the phone, I've been told that there is no way to prevent users to go to their OWA and manually Purge specific items from the ''Recover deleted items''. The Microsoft tech told us to place the desired mailboxes
on a litigation-hold and that all data will be recoverable... but only from the time you place the mailbox onto Litigation-Hold and previous items, which doesn't take effect for new-coming emails.
1- From what I understand, any new items coming in the mailbox after the Litigation-Hold is put in place will still be ''purgeable'', right?
2- Is there a way (PowerShell, Security group, etc.) that can prevent a user from using the Purge option?
We are very surprised that there is absolutely no thread that talks about this issue, which in our opinion, is a major legal and security flaw from Office 365. This is a main concern for us to actually go with Office365. For instance, this means that at
any given time, if a user exchanges emails with a competitor, they can manually purge emails sent and receive as soon as it is sent/received, even after Litigation-Hold is in place.
Thank you for your reply and let us know if you have more questions.
Normand Bessette, IT support technician, Newad Media

Thank you for the reply.
Is there still a way to prevent users from using the Purge option, like with a Powershell script to disable Purge?

Blackberry 8320 malfunctioning

Hi guys,
my blackberry 8320 has been shutting off to the point where i had to use a backup phone. it shuts off when i try to take pictures, even though sometimes its ok. then it shuts off when im in a middle of a call, or when i just left it idle. i was wondering whats happening, it was okay for the first month, then afterward its becoming like this. im pretty sure it wasnt battery problem because the battery was charged full. when my battery is half charged however, once it found my battery is empty then i reseat the battery, then it shows the battery is half charged.
i first thought i need an OS upgrade, which i just did. from 4.5.0.81 to 4.5.0.174. everything succeed but still shuts down on itself and have to do battery pull to turn it back on.
thanks for the time and help

Try this... place a normal business card under the battery door, on top of the battery, and see if the cutting of persists...
You could just have a loose battery connection. You may need to experiment and cut the card, or slightly thicker card, or a folded piece of normal paper. Try that a few days and see if it continues.
Meanwhile:
Here are some good charging tips, please read and you'll see that many of them will apply to you.
http://www.blackberryfaq.com/index.php/Maximum_Battery_Life
And here: http://supportforums.blackberry.com/t5/BlackBerry-Community-Post/Power-Saving-Tips-for-your-BlackBer...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Which type of Blackberry Z10 model

Hi All,
Which type of Blackberry Z10 model and software fits me better with my carrier having 3G+ and EDGE and sitting in Central Africa region.
Best Regards,

Hey charry4G,
Thanks for the reply.
The APN settings are disabled on all BlackBerry Z10 smartphones as the APN settings are hard coded from the SIM card.
Contact your network service provider if you're having trouble getting a data connection.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

BlackBerry 8320 bottom cover.

Hi everyone!
Please can anyone tell me where I can buy a genuine bottom cover (black) for a BlackBerry 8320? I dropped my BlackBerry and the bottom cover now has a hairline crack. I don't really require the complete housing, just the bottom cover. There's an item on eBay which is what I'm looking for, but I don't think it's a genuine BlackBerry item, and so many not match the colour of the rest of my 8320.
http://cgi.ebay.co.uk/BOTTOM-COVER-HOUSING-BLACKBERRY-CURVE-8300-8310-8320-B-/160495587500?pt=UK_Mob...
Thanks very much, look forward to the replies.
Alicia.

See Horizon Wireless Online for BB unlocks, parts and accessories
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Blackberry 8320 Titanium Warranty Matter/Question ?

It was suggested by T-Mobile Blackberry Support that I contact you folks directly in regards to a matter with my Blackberry 8320 Titanium.
My phone is still under warranty. Ever since I got the phone it has started to develop dust and small particles under the screen and it appears to be well sealed.
The phone has never been dropped or damaged and looks like brand new.
T-Mobile said it is cosmetic and will not replace it, asked me to ask you folks. This eventually will hamper the screen, you can see the stuff developing and this should be a sealed cover, right ?
These sealed screens should not develop anything under them, that is common sense.
I have seen many other of the same phones and none of them have this issue.
Can you tell me who I can speak to at your company about this. Thanks .... Trying to find a live person to talk to is near impossible and this should not be the case.
Bill

Hi and Welcome to the Forums!
It is interesting that TM would refer you here for official support -- these forums are a user-to-user support channel, not a user-to-RIM conduit. As such, there is no formal support nor information from RIM officially available here.
FWIW -- Front line support for BB's is, by contract, not provided by RIM. The carriers and authorized resellers are responsible for front line formal support to end users. It is possible to bypass your carrier and seek assistance direct from RIM, but such involves fees since you are bypassing your support agreement with your carrier. The "Support and Services" tab toward the top of these forum pages provide information about that. But, if you do go through your carrier for support, they can escalate into RIM at no fee to you if they so choose to.
So, I suggest you go back to them and call them out on why they are not honoring the support agreement you have with them. Unless, of course, that their determination of cosmetic is final -- in which case, well, they have the final say...and pleading your case can only be done through them.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry 8320 model--- purge option

Similar Messages

Maybe you are looking for