Blackberry 8330 keyboard doesn't work for the 2nd time

Hi, this is the second time that this has happened to me. The first time, I had finished a text message, and left it on my bed, only to come back an hour later, and the entire keyboard didn't work. The only thing that worked was the trackball, but it could only move around; I wasn't able to click it or anything. After many battery pulls, I looked online, and saw that I could try to reload the OS using application loader. I did that, but I was left with the same error. I eventually ended up having to go to the store, and as I was still under warranty, got them to replace it for me. All in all, a huge hassle. Lo and behold, two months later, the same issue is back. I've tried the battery pulls, and reloading the OS, but nothing seems to work! Any ideas? I don't want to have to keep going back to the store to replace it.

I have the same problem on My Blackberry 8310 Curve..

Similar Messages

My camera on my iPad 2 has stopped working for the second time.

My camera on my iPad.2 has stopped working for the 2nd time. Last time it just started working again after a couple of months.
I have tried closing the camera app completely & also re-booting the iPad completely but to no avail.
Any ideas anyone?

You'll first need to have iTunes on your computer - from the summary page (the one that opens when you select the iPad in iTunes) it'll give you options for backing up and restoring it. On that page just select 'restore iPad' and that'll get it started.
Hope it's just software then, those out-of-warranty replacements can get pricey.

My keyboard doesn't work for my mac computer

My keyboard doesn't work for my mac computer

Please explain how "it does not work." Is the KB Bluetooth, does the Bluetooth icon appear in the menu bar, and so on?
Barry

Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
Sai

In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

My keyboard doesn't work from the login screen, but when I login as a guest user it works fine (minus the brightness buttons, playback buttons, etc.).

I've already switched out the batteries and the keyboard works fine, so I fear it might be some sort of bug? All the methods of restarting or resetting certain settings can only be done from the login screen or from within an account, when the keyboard doesn't work, and the guest options are limited to non existent.

Try doing a SMC reset, you may need to do this 2-3 times as sometimes the reset doesn't always "take" the first time. To do a SMC reset, shut down the computer, unplug the power cord from the wall and computer, wait 15-20 seconds and restart normally and test. If after 2-3 resets it still does not work test another keyboard. If that keyboard works then this indicates your keyboard has failed and needs to be replaced.

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells

After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.

reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT1349 I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

I recently bought an iPhone and my charger is not working. It worked for the first time but now it is now it is not working. Can i get it replaced in India because i bought this phone from US?

The warranty is only good in the U.S.
You woulod have to send it to someone in the U.S. They could take it in and if it is defective, then it would be replaced.

When Webdynpro popup is opened for the 2nd time, image is not shown

Hi Experts,
We have created a WebDynpro with a popup window.
This is shown in an iView in the portal.
If the popup is opened for the first time it looks good.
If the popup is opened for the 2nd time the image is not shown and the title is shown with a different font.
If we do a preview of the iView in PCD content area, the title and image is shown and the right font is used: also when you open this for the second time.
If the iView is in a role the problem appears.
How can this be solved?
Thanks in advance,
Joeri

Sounds like a wrong reference to a stylesheet.
Use IE Developer Toolbar or Firefox to debug the code. Or view source (of the popup) and search for .css. Do the same for the popup that doesn't work. Check if there are differences.
Good luck!
Noel

My macbook pro retina 2014 has crashed for the 2nd time in 2 mo

My macbook pro retina 2014 has crashed for the 2nd time in 2 months. Can't get past the gray/apple screen. The first time the genius bar tried all the different tricks to get it to boot all the way through, but in the end had to reinstall mavericks. They said there weren't any indications of it being a hardware issue after running diagnostics. The only possible reason is that it has something to do with some ProTools 10 plugins which I had downloaded in both occasions less than a week before. I don't believe that would be the issue and I'm guessing it's a hardware issue at this point. It's still under a factory warranty, so I'm not too concerned. Thoughts?

Try SMC and PRAM resets:
http://support.apple.com/en-us/HT201295
http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
If no success, try booting into the recovery partition and select Disk Utility from the 4 option menu.
Run Disk Utility>First Aid, Verify and Repair.
Any Change?
Ciao.

My keyboard doesn't work well : the letters don't appears

Hello,
I have a problem with my IMac bluetooth keyboard.
No one of my keyboard letters work once the system has booted.
(if I boot in safe mode, all letters are working)
To access to the keyboard configuration, as I have a password, I tried to delete it with these commands :
fsck -fy
mount -uw /
rm /var/db/.applesetupdone
Now, each time I boot my Imac it launchs a first use configuration asking me language, country...
And when it arrives to the keyboard's config, it only propose me 6 languages (the 6 ones looks like to chinese)
Anyone I choose, it returns at each time to the beginning of the config.
Can someone give me an advice ?
Is it possible that a virus do this ?
Thanks a lot ! (excuse my english mistakes)

Boot in single-user mode as you did before and restore the file you unfortunately deleted:
touch /var/db/.AppleSetupDone
You must get this exactly right or it won't work. You should then be able to boot in safe mode and log in.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
for k in {,/S*}/L*/E*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo defaults read com.apple.loginwindow LoginHook;; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
{ crontab -l; ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la*; } 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Italian keyboard doesn't work under the gui

I have an italian keyboard on a x86 Solaris 10 installation.
All the patch available using Sun Update applied but the keyboard doesn't work, it still works only as a USA keyboard.
Forcing it as a Italian layout at startup (pressing esc and using the boot utility) make the keyboard work in the consolle with the correct layout but under the gui, after the dtlogin startup, the key doesn't work correctly. Every key is "shifted" of one position, so inserting "root" result in "eiir"
Even applyng the 118966-08 patch as suggested doesn't work.
Obiouvsly I used the gnome panel to set the correct keyboard under gnome but with no result
Both the two type of italian keyboards don't work, the standard one and the 104 "ibm" italian layout.
All this keyboards work fine on the same PC with both WindowsXP and Linux Ubuntu.
Any suggestion to fix this ?

The solution was to reconfigure the X-Server: In a console-window I called kdmconfig and corrected the keyboard settings: it was a US-Keyboard. Nobody knows ... At installation time I configured a german keyboard.
A remaining problem is that my mouse and keyboard are connected via USB and they are frozzen after boot. First when I physicaly detach both and reconnect them they start working in an ordinary manner. I saw a forum entry which talked about BIOS-settings.

Booting problem, mouse and keyboard doesn't work for 2 minutes

I got a brand new mac mini 2.4Ghz just 3 weeks ago, got a few problems over the last week that I've been able to fix, but now I'm stuck with a problem when booting. The booting process seems a bit slow, and once the desktop has been fully loaded, the keyboard and mouse doesn't work, and the computer is using the non-calibrated Display Profile. After about 2 minutes, the display profile change to calibrated, and the mouse and keyboard work again. I have no clue about how to fix that problem, and I'm thinking about bringing the computer to an Apple Store by tomorrow if I can't fix it.

Welcome to  Discussions!
Check your login items to see what's there. You may have too much going on at login which is causing the serious delay in loading time.
To check the login items, open System Preferences, under the System section click Accounts, click your account name, then click the tab at top labeled Login Items. If you want to remove an item in the list, click the item then click the - button below the list.

Phone not working for the 5th time

I am so happy with my fios service. Now for the 5th time our phone does not work. We regularly cant recive calls, and sometimes cant call out. Each time we call (with cell) they say nothing is wrong and will send a tech out days later and an hour before the tech is supposed to show up, it suddenly starts working again. A week later it stops working, and we go through the same ordeal. I wonder who they cut off, whent hey turn ours on, and who gets service when they cut ours off. Its like they play musical chairs with our phone service. Sometimes we get incomming calls, sometimes outgoing, but hardly ever both. **bleep**? Now waiting another 8 days for them to send someout out because right now we dont even have a ring tone. Please just fix the problem, or stop charging us the $30 for the service. What a sham. Oh, and to top it all off,t his week, Verizon Wireless also assigned my wifes account/phone number to someone elses contract. She has had the number for over 10 years, I just bought her a new iPhone (full price $900) and when we went the store a man by the name of Carlos told us to pound sand. He had given the line to someone else and the only way he would fix it is if we returned the phone we bought from Verizon online, and bought a phone in his store!!! Can you believe it. Carlos would not give her line back unless she bought a phone in his store.

Hi mikalsan,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

ITunes 10.5.2.11 doesn't launch for the second time on Windows 7, 64 bit.

I have iTunes 10.5.2.11(The latest as of now) on a WIndows 7, 64 bit PC. iTunes launches itself properly for the first time after my system boots, but, when I close iTunes and try to open it once again(without booting again), it's like the computer didn't get my instruction, the iTunes icon only clicks, but, it doesn't open. When I check the running programs with the Task Manager, iTunes isn't there. But, in processes, iTunes *32 is listed(This is after I tried launching it for the second time). If I end this process(and also the process tree), and then try to open iTunes, the window of iTunes appears, but, it just sits there like a brick!
Can somebody please help me. Thank you.

I have iTunes 10.5.2.11(The latest as of now) on a WIndows 7, 64 bit PC. iTunes launches itself properly for the first time after my system boots, but, when I close iTunes and try to open it once again(without booting again), it's like the computer didn't get my instruction, the iTunes icon only clicks, but, it doesn't open. When I check the running programs with the Task Manager, iTunes isn't there. But, in processes, iTunes *32 is listed(This is after I tried launching it for the second time). If I end this process(and also the process tree), and then try to open iTunes, the window of iTunes appears, but, it just sits there like a brick!
Can somebody please help me. Thank you.

Alv display for the 2nd time.

Hi everybody
I have created a interactive alv report. when i am going for   first display it is giving correct result whne i go for 2nd time it is not initilizing the grids the records are displayed twice or same record is displayed. i have check BCALV_GRID_03 but i could not understand it properly so i am giving my code please help.
*& Report ZVTEST1                                                     *
REPORT ZVTEST1 .
class lcl_event_receiver definition deferred.
class cl_event_receiver definition deferred.
TYPE-POOLS : SLIS.
tables : ekko,ekpo,lfa1.
data : begin of itab occurs 0,
         lifnr like ekko-lifnr,
         netwr like ekpo-netwr,
         name1 like lfa1-name1,
      end of itab.
data : begin of inv_det occurs 0,
         ebeln like ekko-ebeln,
         bedat like ekko-bedat,
         lifnr like ekko-lifnr,
         netwr like ekpo-netwr,
         name1 like lfa1-name1,
       end of inv_det.
data : begin of mat_det occurs 0,
         ebeln like ekko-ebeln,
         lifnr like ekko-lifnr,
         bedat like ekko-bedat,
         matnr like ekpo-matnr,
         menge like ekpo-menge,
         netpr like ekpo-netpr,
         NETWR LIKE EKPO-NETWR,
         maktx like makt-maktx,
       end of mat_det.
DATA :TEST_GRID TYPE REF TO CL_GUI_ALV_GRID,
      TEST_CONT TYPE SCRFNAME VALUE 'TESTING_ALV',
      TEST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
      TEST_LAYOUT TYPE LVC_S_LAYO,
      TEST_FIELDCAT TYPE LVC_T_FCAT,
      ok_code like sy-ucomm,
      event_receiver type ref to lcl_event_receiver,
      event_receiver1 type ref to cl_event_receiver,
      TEST_GRID1 TYPE REF TO CL_GUI_ALV_GRID,
      TEST_CONT1 TYPE SCRFNAME VALUE 'PARTYWISE_DETAILS',
      TEST_CONTAINER1 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
      ls_layout TYPE lvc_s_layo,
      TEST_LAYOUT1 TYPE LVC_S_LAYO,
      TEST_FIELDCAT1 TYPE LVC_T_FCAT,
      TEST_GRID2 TYPE REF TO CL_GUI_ALV_GRID,
      TEST_CONT2 TYPE SCRFNAME VALUE 'INVOICE',
      TEST_CONTAINER2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
      TEST_LAYOUT2 TYPE LVC_S_LAYO,
      TEST_FIELDCAT2 TYPE LVC_T_FCAT.
select-options: s_bedat for ekko-bedat.
CALL SCREEN 100.
class LCL_EVENT_RECEIVER definition.
public section.
      methods:
      handle_double_click
        for event double_click of cl_gui_alv_grid
            importing e_row e_column.
private section.
endclass.
class LCL_EVENT_RECEIVER implementation.
method handle_double_click.
    data: itab1 like line of itab.
    read table itab index e_row-index into itab1.
    perform select_table_invdet using itab1
                               changing inv_det.
    call screen 200 starting at 10 5.
endmethod.
endclass.
class CL_EVENT_RECEIVER definition.
public section.
      methods:
       handle_hotspot_click
        for event hotspot_click of cl_gui_alv_grid
            importing e_row_id e_column_id es_row_no.
private section.
endclass.
class CL_EVENT_RECEIVER implementation.
method handle_hotspot_click.
    data: itab2 like line of inv_det.
    read table inv_det index e_row_id-index into itab2.
    perform select_matdet using itab2
                               changing mat_det.
    call screen 300 starting at 15 5.
endmethod.
endclass.
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
PERFORM SELECT-DATA. " FOR THE INITIAL LIST.
PERFORM ALV_DISPLAY.   "TO DISPLAY INITIAL SCREEN.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
   WHEN 'BACK'.
     LEAVE TO SCREEN 0.
   WHEN 'EXIT'.
     LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form SELECT-DATA
      text
--> p1        text DATA SELECTION FOR THE 1ST LIST
<-- p2        text
FORM SELECT-DATA .
select alifnr sum( bnetwr ) as netwr
    into corresponding fields of itab
    from ekko as a inner join ekpo as b on bebeln = aebeln
     where abedat in s_bedat group by alifnr.
    select single name1 from lfa1 into itab-name1
       where lifnr = itab-lifnr.
append itab.
endselect.
ENDFORM.                    " SELECT-DATA
*&      Form ALV_DISPLAY
      text
--> p1        text DISPLAY THE LIST FIRST TIME.
<-- p2        text
FORM ALV_DISPLAY .
IF TEST_GRID IS INITIAL.
     CREATE OBJECT TEST_CONTAINER
       EXPORTING
         CONTAINER_NAME              = 'TESTING_ALV'.
      CREATE OBJECT TEST_GRID
        EXPORTING
          I_PARENT          = TEST_CONTAINER.
   PERFORM PROC_CATALOG CHANGING TEST_FIELDCAT.
   PERFORM PROC_LAYOUT CHANGING TEST_LAYOUT.
   CALL METHOD TEST_GRID->SET_TABLE_FOR_FIRST_DISPLAY
     EXPORTING
       IS_LAYOUT                     = TEST_LAYOUT
     CHANGING
       IT_OUTTAB                     = ITAB[]
       IT_FIELDCATALOG               = TEST_FIELDCAT[].
create object EVENT_RECEIVER.
    set handler EVENT_RECEIVER->handle_double_click for TEST_GRID.
ENDIF.
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
EXPORTING
    CONTROL           = TEST_CONTAINER.
CALL METHOD CL_GUI_CFW=>FLUSH.
ENDFORM.                    " ALV_DISPLAY
*&      Form PROC_CATALOG
      text
     <--P_TEST_FIELDCAT text
FORM PROC_CATALOG CHANGING P_TEST_FIELDCAT type lvc_t_fcat.
data: TEST_fieldcat type lvc_s_fcat.
TEST_FIELDCAT-fieldname = 'LIFNR'.
TEST_FIELDCAT-REF_TABLE = 'LFA1'.
TEST_FIELDCAT-OUTPUTLEN = '12'.
TEST_FIELDCAT-coltext   = 'VENDOR CODE'.
TEST_FIELDCAT-SELTEXT   = 'VENDOR CODE'.
*TEST_FIELDCAT-HOTSPOT   = 'X'.
APPEND TEST_FIELDCAT TO P_TEST_FIElDCAT.
CLEAR TEST_FIELDCAT.
TEST_FIELDCAT-fieldname = 'NAME1'.
TEST_FIELDCAT-REF_TABLE = 'LFA1'.
TEST_FIELDCAT-OUTPUTLEN = '25'.
TEST_FIELDCAT-coltext   = 'VENDOR NAME'.
TEST_FIELDCAT-SELTEXT   = 'VENDOR NAME'.
APPEND TEST_FIELDCAT TO P_TEST_FIElDCAT.
CLEAR TEST_FIELDCAT.
TEST_FIELDCAT-fieldname = 'NETWR'.
TEST_FIELDCAT-REF_TABLE = 'EKPO'.
TEST_FIELDCAT-OUTPUTLEN = '20'.
TEST_FIELDCAT-coltext   = 'PURCHASE AMOUNT'.
APPEND TEST_FIELDCAT TO P_TEST_FIElDCAT.
CLEAR TEST_FIELDCAT.
ENDFORM.                    " PROC_CATALOG
*&      Form PROC_LAYOUT
      text
     <--P_TEST_LAYOUT text
FORM PROC_LAYOUT CHANGING P_TEST_LAYOUT type lvc_s_layo.
p_TEST_layout-zebra = 'X'.
p_TEST_layouT-grid_title = 'TEST INTERACTIVE ALV'.
p_TEST_layout-smalltitle = 'X'.
p_TEST_layout-no_hgridln    = 'X'.
p_TEST_layout-excp_conds = 'X'.
p_TEST_layout-numc_total = 'X'.
ENDFORM.                    " PROC_LAYOUT
*&      Form select_table_invdet
      text
     -->P_ITAB1 DATA SELECTION FOR THE 2ND LIST
     <--P_INV_DET text
FORM select_table_invdet USING    P_ITAB1 like line of itab
                          CHANGING P_INV_DET.
clear inv_det.
select alifnr aebeln abedat sum( bnetwr ) as netwr
    into corresponding fields of inv_det
    from ekko as a inner join ekpo as b on bebeln = aebeln
     where alifnr = p_itab1-lifnr and abedat in s_bedat group by
     alifnr aebeln a~bedat.
    select single name1 from lfa1 into inv_det-name1
       where lifnr = inv_det-lifnr.
append INV_DET.
endselect.
ENDFORM.                    " select_table_invdet
*&      Module STATUS_0200 OUTPUT
      text
MODULE STATUS_0200 OUTPUT.
IF TEST_GRID1 IS INITIAL.
    CREATE OBJECT TEST_CONTAINER1
       EXPORTING
         CONTAINER_NAME              = 'NEXT_CONT'.
    IF SY-SUBRC NE 0.
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          TITEL         = SY-REPID
          TXT1          = SY-SUBRC
          TXT2          = 'THE CONTROL IS NOT CREATED'.
ENDIF.
     CREATE OBJECT TEST_GRID1
       EXPORTING
         I_PARENT          = TEST_CONTAINER1.
   PERFORM PROC_CATALOG1 CHANGING TEST_FIELDCAT1.
   PERFORM PROC_LAYOUT1 CHANGING TEST_LAYOUT1.
    CALL METHOD TEST_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
        IS_LAYOUT                     = test_layout1
      CHANGING
        IT_OUTTAB                     = inv_det[]
        IT_FIELDCATALOG               = TEST_FIELDCAT1[].
create object EVENT_RECEIVER1.
    set handler EVENT_RECEIVER1->handle_hotspot_click for TEST_GRID1.
ELSE.
   CALL METHOD TEST_GRID1->REFRESH_TABLE_DISPLAY.
ENDIF.
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
EXPORTING
    CONTROL           = TEST_container1.
CALL METHOD CL_GUI_CFW=>FLUSH.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE USER_COMMAND_0200 INPUT.
case ok_code.
    when 'EXIT'.
leave to screen 0.
endcase.
clear ok_code.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Form PROC_CATALOG1
      text
     <--P_TEST_FIELDCAT1 text
FORM PROC_CATALOG1 CHANGING P_TEST_FIELDCAT1 type lvc_t_fcat.
data: TEST_fieldcat1 type lvc_s_fcat.
TEST_FIELDCAT1-fieldname = 'EBELN'.
TEST_FIELDCAT1-REF_TABLE = 'EKKO'.
TEST_FIELDCAT1-OUTPUTLEN = '12'.
TEST_FIELDCAT1-coltext   = 'P.O NUMBER'.
TEST_FIELDCAT1-SELTEXT   = 'P.O NUMBAR'.
TEST_FIELDCAT1-HOTSPOT   = 'X'.
APPEND TEST_FIELDCAT1 TO P_TEST_FIElDCAT1.
CLEAR TEST_FIELDCAT1.
TEST_FIELDCAT1-fieldname = 'BEDAT'.
TEST_FIELDCAT1-REF_TABLE = 'EKKO'.
TEST_FIELDCAT1-OUTPUTLEN = '10'.
TEST_FIELDCAT1-coltext   = 'P.O.DATE'.
TEST_FIELDCAT1-SELTEXT   = 'P.O.DATE'.
APPEND TEST_FIELDCAT1 TO P_TEST_FIElDCAT1.
CLEAR TEST_FIELDCAT1.
TEST_FIELDCAT1-fieldname = 'NETWR'.
TEST_FIELDCAT1-REF_TABLE = 'EKPO'.
TEST_FIELDCAT1-OUTPUTLEN = '20'.
TEST_FIELDCAT1-coltext   = 'PURCHASE AMOUNT'.
APPEND TEST_FIELDCAT1 TO P_TEST_FIElDCAT1.
CLEAR TEST_FIELDCAT1.
ENDFORM.                    " PROC_CATALOG1
*&      Form PROC_LAYOUT1
      text
     <--P_TEST_LAYOUT1 text
FORM PROC_LAYOUT1 CHANGING P_TEST_LAYOUT1 type lvc_s_layo.
p_TEST_layout1-zebra = 'X'.
p_TEST_layouT1-grid_title = 'DATE WISE PURCHASE ORDERS'.
p_TEST_layout1-smalltitle = 'X'.
p_TEST_layout1-no_hgridln    = 'X'.
p_TEST_layout1-excp_conds = 'X'.
p_TEST_layout1-numc_total = 'X'.
ENDFORM.                    " PROC_LAYOUT1
*&      Form select_matdet
      text
     -->P_ITAB2 text
     <--P_MAT_DET text
FORM select_matdet USING    P_ITAB2 like line of inv_det
                    CHANGING P_MAT_DET.
select ebeln bedat lifnr from ekko into corresponding fields of mat_det
    where ebeln = p_itab2-ebeln and bedat = p_itab2-bedat
      and lifnr = p_itab2-lifnr..
select matnr menge netpr NETWR from ekpo
   into corresponding fields of mat_det
     where ebeln = mat_det-ebeln.
select single maktx from makt into corresponding fields of mat_det
     where matnr = mat_det-matnr.
append mat_DET.
endselect.
endselect.
ENDFORM.                    " select_matdet
*&      Module STATUS_0300 OUTPUT
      text
MODULE STATUS_0300 OUTPUT.
set pf-status 'TEST1'.
IF TEST_GRID2 IS INITIAL.
   CREATE OBJECT TEST_CONTAINER2
     EXPORTING
       CONTAINER_NAME              = 'INVOICE_DETAILS'.
    IF SY-SUBRC NE 0.
      CALL FUNCTION 'POPUP_TO_INFORM'
        EXPORTING
          TITEL         = SY-REPID
          TXT1          = SY-SUBRC
          TXT2          = 'THE CONTROL IS NOT CREATED'.
    ENDIF.
    CREATE OBJECT TEST_GRID2
      EXPORTING
        I_PARENT          = TEST_CONTAINER2.
     PERFORM PROC_CATALOG2 CHANGING TEST_FIELDCAT2.
     PERFORM PROC_LAYOUT2 CHANGING TEST_LAYOUT2.
     CALL METHOD TEST_GRID2->SET_TABLE_FOR_FIRST_DISPLAY
       EXPORTING
         IS_LAYOUT                     = test_layout2
       CHANGING
         IT_OUTTAB                     = mat_det[]
         IT_FIELDCATALOG               = test_fieldcat2[].
else.
CALL METHOD TEST_GRID2->GET_FRONTEND_LAYOUT
IMPORTING
    ES_LAYOUT = ls_layout.
CALL METHOD TEST_GRID2->SET_FRONTEND_LAYOUT
EXPORTING
    IS_LAYOUT = ls_layout.
ENDIF.
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
EXPORTING
    CONTROL           = test_container2.
CALL METHOD CL_GUI_CFW=>FLUSH.
IF SY-SUBRC NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
    TITEL         = SY-REPID
    TXT1          = SY-SUBRC
    TXT2          = 'ERROR IN FLUSH'.
ENDIF.
ENDMODULE.                 " STATUS_0300 OUTPUT
*&      Module USER_COMMAND_0300 INPUT
      text
MODULE USER_COMMAND_0300 INPUT.
case ok_code.
    when 'BACK'.
        leave to screen 0.
    WHEN 'CANCLE'.
      LEAVE PROGRAM.
endcase.
clear ok_code.
ENDMODULE.                 " USER_COMMAND_0300 INPUT
*&      Form PROC_CATALOG2
      text
     <--P_TEST_FIELDCAT2 text
FORM PROC_CATALOG2 CHANGING P_TEST_FIELDCAT2 TYPE LVC_T_FCAT.
data: TEST_fieldcat2 type lvc_s_fcat.
TEST_FIELDCAT2-fieldname = 'MATNR'.
TEST_FIELDCAT2-REF_TABLE = 'EKPO'.
TEST_FIELDCAT2-OUTPUTLEN = '12'.
TEST_FIELDCAT2-coltext   = 'MATERIAL NO'.
TEST_FIELDCAT2-SELTEXT   = 'MATERIAL NO'.
*TEST_FIELDCAT1-HOTSPOT   = 'X'.
APPEND TEST_FIELDCAT2 TO P_TEST_FIElDCAT2.
CLEAR TEST_FIELDCAT2.
TEST_FIELDCAT2-fieldname = 'MAKTX'.
TEST_FIELDCAT2-REF_TABLE = 'MAKT'.
TEST_FIELDCAT2-OUTPUTLEN = '30'.
TEST_FIELDCAT2-coltext   = 'DESCRIPTION'.
TEST_FIELDCAT2-SELTEXT   = 'DESCRIPTION'.
APPEND TEST_FIELDCAT2 TO P_TEST_FIElDCAT2.
CLEAR TEST_FIELDCAT2.
TEST_FIELDCAT2-fieldname = 'MENGE'.
TEST_FIELDCAT2-REF_TABLE = 'EKPO'.
TEST_FIELDCAT2-OUTPUTLEN = '10'.
TEST_FIELDCAT2-coltext   = 'QUANTITY'.
TEST_FIELDCAT2-SELTEXT   = 'QUANTITY'.
APPEND TEST_FIELDCAT2 TO P_TEST_FIElDCAT2.
CLEAR TEST_FIELDCAT2.
TEST_FIELDCAT2-fieldname = 'NETPR'.
TEST_FIELDCAT2-REF_TABLE = 'EKPO'.
TEST_FIELDCAT2-OUTPUTLEN = '20'.
TEST_FIELDCAT2-coltext   = 'PURCHASE AMOUNT'.
APPEND TEST_FIELDCAT2 TO P_TEST_FIElDCAT2.
CLEAR TEST_FIELDCAT2.
TEST_FIELDCAT2-fieldname = 'NETWR'.
TEST_FIELDCAT2-REF_TABLE = 'EKPO'.
TEST_FIELDCAT2-OUTPUTLEN = '20'.
TEST_FIELDCAT2-coltext   = 'PURCHASE AMOUNT'.
APPEND TEST_FIELDCAT2 TO P_TEST_FIElDCAT2.
CLEAR TEST_FIELDCAT2.
ENDFORM.                    " PROC_CATALOG2
*&      Form PROC_LAYOUT2
      text
     <--P_TEST_LAYOUT2 text
FORM PROC_LAYOUT2 CHANGING P_TEST_LAYOUT2 type lvc_s_layo.
p_TEST_layout2-zebra = 'X'.
p_TEST_layouT2-grid_title = 'PURCHASE ORDERS MATERIAL WISE DETAILS'.
p_TEST_layout2-smalltitle = 'X'.
p_TEST_layout2-no_hgridln    = 'X'.
p_TEST_layout2-excp_conds = 'X'.
p_TEST_layout2-numc_total = 'X'.
ENDFORM.                    " PROC_LAYOUT2
thanks
Vinayak.

Vinayak,
Add the Code(ELSE part) into the Form ALV_DISPLAY.
IF TEST_GRID IS INITIAL.
CREATE OBJECT TEST_CONTAINER
    EXPORTING
      CONTAINER_NAME = 'TESTING_ALV'.
CREATE OBJECT TEST_GRID
    EXPORTING
     I_PARENT = TEST_CONTAINER.
   PERFORM PROC_CATALOG CHANGING TEST_FIELDCAT.
   PERFORM PROC_LAYOUT CHANGING TEST_LAYOUT.
   CALL METHOD TEST_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
           IS_LAYOUT = TEST_LAYOUT
      CHANGING
           IT_OUTTAB = ITAB[]
           IT_FIELDCATALOG = TEST_FIELDCAT[].
    create object EVENT_RECEIVER.
    set handler EVENT_RECEIVER->handle_double_click
       for   TEST_GRID.
<b>ELSE.
   CALL METHOD TEST_GRID->REFRESH_TABLE_DISPLAY(
             "EXPORTING
             "IS_STABLE =
             "I_SOFT_REFRESH=
                        ).</b>
ENDIF.
Thanks
Kam
Note: Allot points for all worthful postings

Blackberry 8330 keyboard doesn't work for the 2nd time

Similar Messages

Maybe you are looking for