Blackberry 8520 I can not call or write sms
I can not call or write sms, mobile network signal and my phone shows sim card is fine in another phone works
Hi and Welcome to the Community!
Is it possible that your BB remains locked to another carrier? If so, that would explain this behavior...refer:
http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
Otherwise, your SIM could be incompatible with your BB...for which you would need to talk to your SIM provider.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Blackberry 8520 data plan not connecting
Dear sir 3month to I'm using wifi internet now I have data plan when I connecting data plan its not connecting "your currently on a service plan that dose not support this application plz connect wifi network or connect your service provider to upgrade your data plan"
Have I can connect to dataplan ....plz help meYou have to call the carrier so they can add the blackberry data plan. Without that plan it will not work.
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/blackberry-8520-data-plan-not-...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music! -
Why button can not call its script?
I did very simple work: open Director MX 2004, click the
button icon on the Tool Palette, and draw a button on the stage.
Right click it and menu appear. Click "Scripts..." and script
window opens. MouseUp() event function is there already. Write
something in mouseUp(). Anything is OK. Put a breakpoint on some
line.
OK, then click menu Control-Play to run the movie. Click the
button on stage. At this time, it ought to be broken on the
breakpoint. But it didn't. The mouseUp() was not called!
On the other hand, other controls are OK, such as Text,
Shape, etc.. Only botton can not call its script. Is it a bug of
Director MX 2004?It may be that you're creating flash component buttons. Try
setting the tool palette to 'classic' mode (the dropdown at the top
of the tool palette). The buttons you create once you've done this
will be native director buttons.
I've not really used flash component elements much at all so
I can't offer advice as to why the mouseup isn't working with it.
- Ben -
How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
I can not change my Apple ID to the old mail (not possible!)
The old mail don't accept the new password..
I can not delete the Icloud all the time asking my the password of the old mail!
I realy need helpYou can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
Can not read or write to mac hard drive error
When attempting to transfer music files from an external usb harddrive formatted in windows into Itunes, I can only successfully import a small fraction of the music, and then its stops with a error, that the Mac HD can not read or write files.
It's possible the file names have some 'funky' characters in them that the Mac doesn't like ?
What format is the external drive ? -
My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything, I have a child that is very ill and I have to have access to a phone at all times can someone help me? It happened one other time when I plugged it in to my to listen to music. I know it is working it said something on voice control. I tried the press the circle button and the top button but the screen only turned white?
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
TS3367 I can call my friend threw her face time, but she can not call me.
My face time is able to call all my friends threw their face time.
But when it comes to one of my friends, she can not call me or message me threw face time, she can't call anyone threw face time.
I can't seem to figure out how to get hers to be able to call me.
This is threw our I touch.
Can someone help?
Kristinashania11lp wrote:
it didn't give me an i touch option
Probably because there is no such thing as "i touch".
It is iPod touch and the troubleshooting does call it out.
"If you encounter an issue making or receiving a FaceTime call, verify you have the following:
iPhone 4 or later, iPad 2 or later, or iPod touch (4th generation), with the latest available version of iOS." -
In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!
Sorry for my bad english :S
Please, please help meContact the carrier.
-
IPhone5 iOS8.02 can not call
Hi
I updated yesterday to iOS8.02 on my iPhone5 and can not call anyone.
It is the same with my work telephone iPhone4S. Updated yesterday to iOS8.02 and it do not work to call on.
No difference if a press a new number or use old contacts in my contact list.
The time to dial is mostly long and ends with call failed (in Swedish: - samtalet misslyckades)
Any proposals?
Christer___________________________New information on this issue:
Both telephones uses the same telephone providing company and when I changed location all worked well.
A bit unlikely that the provider had a issue just after I updated to iOS8.02.
So I was fooled by a telepohone company antenna problem at my location.
Sorry.
Christer -
Sometimes I cant call my contacts or the caller log. This error have followed me through all the firmware upgrades, but it is still the same.
The error occurs from time to time and nothing happens when I press the green button. When I open caller log I can see all numbers but nothing happens when I press green. Same happens with contact list. I can open contacts, open details, but when I press "voicecall" nothing happens.
I can dial number manually and then call them. I can also send messages to contacts, but I can not call them in other ways than pres the number manually
The only thing that helps is a reboot.
Does anyone have any experience with this?faizalajith wrote:
In N73 a major problem or error occurs it is "*u cant dial contact in ur phone directly*" but manually u can dial by entering the whole number.
There no fix till now only option was *switch off & on*.. which is still annoying..
i have noticed
*v home* software is a fix for it
only use v home screen to dial number.
Settings in Vhome for
"dial contact by name" is
>settings>smart dialling>name alone.
Still u dont want to switch off the phone every time go 4 vhome....
Download Here
gallery.mobile9.com/f/2507590/
Hi,
Welcome to the forum!
Try to perform the restore factory settings. Note that your files won't be deleted. To do this, go to Tools and then Settings. Select General and then Orig. phone settings. Enter the security code or the lock code. The default code is 12345 unless you changed it. If that didn't work, it's best to have your phone physically checked at the Nokia Care Point. They'll be able to help you with your concern. Note that charges may apply for the out of warranty phone.
You can visit this link for your local support page for further assistance: www.nokia.com/support -
Can EE Customer service call me on my phone? I can not call to UK from abroad
URGENT Can EE Customer service call me on my phone? I can not call to UK from abroad
Hi ,
Very sorry this is a public forum no calls can be made.
How can I help with your query?
Thanks. -
My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail
Try resseting the network settings in settings>general then go to reset a the bottom.
Then reset NETWORK settings. -
Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server
Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server.
I wrote the Server Application with Tuxedo version 8.0.
And used tuxedo71 WS client to call the service.
The client application displayd tpinit fail.
ULog told me "prv7.1 not allowed,use -t option on wsl".
Is there any way to solve this problem?
thanks!risen,
Yes there is a way to solve this. As the error message suggests, use the -t
option on your WSL server. Look at
http://edocs.bea.com/tuxedo/tux80/atmi/secadm10.htm#1284650
[ I know this documentation is astonishingly well hidden! ]
Peter.
risen wrote:
Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server.
I wrote the Server Application with Tuxedo version 8.0.
And used tuxedo71 WS client to call the service.
The client application displayd tpinit fail.
ULog told me "prv7.1 not allowed,use -t option on wsl".
Is there any way to solve this problem?
thanks! -
My iphone 5 for some reason can receive calls, send & receive texts but can not call out
My iphone 5 for some reason can receive calls, send & receive texts but can not call out
I am not sure if this issue is going to help you but lets give it a try.
I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using. -
may ipod touch can only recieved IMs. It can not call or recieve any video and audio calls, please help. thanks
Maybe try here:
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
What apps are you using?
Maybe you are looking for
-
Not showing the Data in VC application
Hi I have developed the application in VC. It is showing the data some times , it is not showing the data. Can u please let me know what is the problem. when i checked using the Test Data service . It is showing the data. Then i have developed step b
-
How can I enter an event for the first Monday of every month?
I used to have a Custom choice that allowed me to select day or date for repeat. Where is it?
-
Setting Black and White as the default when printing to a Canon Image Class 4080i
Hi, I've got two Canon Image Class 4080i's that we are printing to at the school I work at. I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7. My questi
-
Aperture asks for original serial number after migration to new MAC
After migrating my software and files from my iMac to a new Mac Mini. Aperture asks for serial number first time I wanted to use it. Will not accept the serial number from either my first, Aperture 2 version of my Aperture 3 upgrade. I believe I neve
-
Back Order Information in My Account Order history
Hi, I have a customer looking to provide back order information on the above page ( orderhistory.aspx) The data to provide the outstanding delivery quantity is readily available in the ShipmentDetails table but I also see that this information is no