Blackberry 9220 won't start after updating OS

My blackberry 9220 was perfectly working for the past 8months, after finding out that there's a new update for os, i tried updating mine. I fell asleep while updating my os that i didnt notice if the os was successfully updated bt wen i woke up in the middle of the night, my phone won't start. When i tried charging it, the red led light lights up then the initial screen where you see the "blackberry" word and load bar below it starts bt only flashes and turns off. It keeps repeating. I tried going to a phone technician but they said they cannot reformat my phone because it doesn't turn on or completely turn on in the first place.. What should i do? Please help me.

Hi ThrineDee
Welcome to BlackBerry Support Forums
Have you performed an OTA software update ?
First be sure that the battery is fully charged then refer to this KB Article and try to recover your device :
KB10144 : How to force the detection of the BlackBerry smartphone using Application Loader
Try it and let us know.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

Blackberry 9220 won't start after os update

My blackberry 9220 was perfectly working for the past 8months, after finding out that there's a new update for os, i tried updating mine. I fell asleep while updating my os thy i didnt notice if the os was successfully updated bt wen i woke up at the middle of the night, my phobe won't start. When i tried charging it, the red led light lights up then the initial screen where you see the blackberry word and load bar below it starts bt only flashes and turns off. It keeps repeating. I tried going to a phone technician but they said they cannot reformat my phone because it doesn't turn on or completely turn on in the first place.. What should i do? Please help me.

Hi and Welcome to the Community!
You may need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Firefox won't start after update - nothing in support pages helps

windows 7 - firefox won't start after update - no support pages are relevant

-> [[Firefox will not start]]
Check and tell if its working.

[SOLVED] GDM/Gnome won't start after update

Today after I run pacman -Suy, GDM/Gnome won't start anymore after reboot. The error message I get after GDM starts is:
Oh no! Something has gone wrong.
A problem has occurred and the system can't recover. Please contact a system administrator
Does anyone have any idea what happened and how can I recover the system?
Here is the complete log for the update:
http://bpaste.net/show/209520/
Here is the journalctl -u gdm log:
http://sprunge.us/LEOU
Here is tail -2000 /var/log/messages.log:
http://sprunge.us/ObWY
And here is the /var/log/Xorg.0.log:
http://bpaste.net/show/209549/
I can't imagine any other log file that might help figure out what happened, let me know if there's anything else.
Any help is appreciated. Thanks.
Edit: I stopped gdm, created a ~/.xinitrc and could successfully start Gnome with startx. The problem remains with GDM.
Edit: The last update solved my problem: http://sprunge.us/RKWA
Last edited by falmp (2014-04-22 20:38:20)

I'm not sure my issue is really the same one, but am hoping for some guidance here if possible. Trying to start GDM gives me the same error message/screen. After tdm fails I can switch to a console,
sudo systemctl stop gdm.service
then
sudo systemctl start lightdm.service
and lightdm starts fine. However, trying to log in to gnome-session gives me the very same error as I had with GDM. I can log into XFCE just fine. Attempting to start gnome-ession via startx also gives me the error screen. Does anyone know how I can diagnose the problem? Thanks,
Matt

Xbmc-standalone won't start after update

I updated and now xbmc service won't start. When i run startx on my admin user, I can get xbmc to start up, but it won't start as 'xbmc' anymore. When I `su xbmc` and try to run `startx` or `xbmc-standalone` I get the same error. Not sure what's going on.
orwell% sudo systemctl status xbmc -l
xbmc.service - Starts instance of XBMC using xinit
Loaded: loaded (/usr/lib/systemd/system/xbmc.service; enabled)
Active: inactive (dead) since Mon 2014-03-03 19:00:23 PST; 3s ago
Process: 2012 ExecStart=/usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp (code=exited, status=0/SUCCESS)
Main PID: 2012 (code=exited, status=0/SUCCESS)
Mar 03 19:00:20 orwell xinit[2012]: Initializing built-in extension DRI2
Mar 03 19:00:20 orwell xinit[2012]: Loading extension GLX
Mar 03 19:00:20 orwell xinit[2012]: (II) [KMS] Kernel modesetting enabled.
Mar 03 19:00:21 orwell xinit[2012]: ERROR: Unable to create application. Exiting
Mar 03 19:00:21 orwell xinit[2012]: ERROR: Unable to create application. Exiting
Mar 03 19:00:22 orwell xinit[2012]: ERROR: Unable to create application. Exiting
Mar 03 19:00:22 orwell xinit[2012]: XBMC has exited uncleanly 3 times in the last 1 seconds.
Mar 03 19:00:22 orwell xinit[2012]: Something is probably wrong
Mar 03 19:00:22 orwell xinit[2012]: /usr/bin/xinit: connection to X server lost
Mar 03 19:00:22 orwell xinit[2012]: waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
I've looked through : https://bbs.archlinux.org/viewtopic.php?id=177770 and it seems to be a similar issue.
Last edited by eyeemaye (2014-03-05 03:45:13)

After today's update (version 12.3-11), I get a new error. For the record I've changed PAMName from 'login' to 'su' for debugging purposes.
xbmc.service - Starts instance of XBMC using xinit
Loaded: loaded (/usr/lib/systemd/system/xbmc.service; enabled)
Active: inactive (dead) since Fri 2014-03-07 20:58:52 PST; 2min 33s ago
Process: 3381 ExecStart=/usr/bin/xinit /usr/bin/dbus-launch /usr/bin/xbmc-standalone -l /run/lirc/lircd -- :0 -nolisten tcp vt7 (code=exited, status=0/SUCCESS)
Main PID: 3381 (code=exited, status=0/SUCCESS)
Mar 07 20:58:51 orwell pulseaudio[3443]: [pulseaudio] module.c: Failed to load module "module-device-restore" (argument: ""): initialization failed.
Mar 07 20:58:51 orwell xinit[3381]: ERROR: Unable to create application. Exiting
Mar 07 20:58:51 orwell pulseaudio[3469]: [pulseaudio] module-device-restore.c: Failed to open volume database '/var/lib/xbmc/.config/pulse/739ce619b49f4eb797280beb523b50fd-device-volumes': No space left on device
Mar 07 20:58:51 orwell pulseaudio[3469]: [pulseaudio] module.c: Failed to load module "module-device-restore" (argument: ""): initialization failed.
Mar 07 20:58:51 orwell xinit[3381]: ERROR: Unable to create application. Exiting
Mar 07 20:58:51 orwell xinit[3381]: XBMC has exited uncleanly 3 times in the last 1 seconds.
Mar 07 20:58:51 orwell xinit[3381]: Something is probably wrong
Mar 07 20:58:51 orwell xinit[3381]: /usr/bin/xinit: connection to X server lost
Mar 07 20:58:51 orwell xinit[3381]: waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
Mar 07 20:58:52 orwell systemd[3382]: pam_unix(su:session): session closed for user xbmc
Last edited by eyeemaye (2014-03-08 05:19:34)

Ipad won't start after update 8.2

after updating my ipad it won't work just stuck on the start screen (the one with the white apple logo) .. i had tried to restart it and re install the update from itunes still the same problem ..

it's done thank you it back .. ^_____________________^

Itunes won't start after update to 11.1

after updating to version 11.1, iTunes won't start anymore.
Below the problem signature (dutch).
Any suggestions to solve this?
Probleemhandtekening:
Gebeurtenisnaam van probleem: BEX
Naam van de toepassing: iTunes.exe
Versie van toepassing: 11.1.0.126
Tijdstempel van toepassing: 52394b24
Naam van foutmodule: StackHash_0a9e
Versie van foutmodule: 0.0.0.0
Tijdstempel van foutmodule: 00000000
Uitzonderingsmarge: 00000000
Uitzonderingscode: c0000005
Uitzonderingsgegevens: 00000008
Versie van besturingssysteem: 6.1.7601.2.1.0.256.4
Landinstelling-id: 1043
Aanvullende informatie 1: 0a9e
Aanvullende informatie 2: 0a9e372d3b4ad19135b953a78882e789
Aanvullende informatie 3: 0a9e
Aanvullende informatie 4: 0a9e372d3b4ad19135b953a78882e789
Lees de onlineprivacyverklaring:

After updating to OSX 10.9.3, my iTunes won't open. If I try to drag it to trash, I get the message "iTunes can't be modified or deleted because it is required by OS X".

[SOLVED] CCSM won't start after updating compiz

I just updated compiz, compil-plugins-main, ccsm etc. and ccsm (Compizconfig settings manager) just dont start.
[broi@broi-Archlinux ~]$ ccsm
Info: No sexy-python package found, don't worry it's optional.
Traceback (most recent call last):
File "/usr/bin/ccsm", line 99, in <module>
import compizconfig
ImportError: /usr/lib/python2.7/site-packages/compizconfig.so: undefined symbol: ccsImportFromFile
[broi@broi-Archlinux ~]$
I tried with "python2" or "python3" before I type a .py command (which worked in some issues) but in this one it dont help.
When I try with python 3 -> "python3 /usr/bin/ccsm" I get:
[broi@broi-Archlinux ~]$ python3 /usr/bin/ccsm
File "/usr/bin/ccsm", line 45
if dbus.version < (0, 80, 0):
^
TabError: inconsistent use of tabs and spaces in indentation
[broi@broi-Archlinux ~]$
Thanks.
Solution: Rebuilt the compizconfig-python
UPDATE: Just run update and you will get fixed compizconfig-python.
Last edited by broi (2012-03-23 16:26:25)

Same problem after pacman -Syu (using XFCE).
Not only compiz won't start, my mouse cursor is gone until I open some windows. The window decorations have disappeared (minimize, maximize, close). This is even after removing the fusion-icon from autostart in XFCE and rebooting (afaict, compiz is not running as a process when I list running processes with ps -ef). Also having difficulty switching focus between open windows.
[2012-03-21 14:27] upgraded bash (4.2.024-1 -> 4.2.024-2)
[2012-03-21 14:27] upgraded libcompizconfig (0.8.8-1 -> 0.8.8-2)
[2012-03-21 14:27] upgraded compizconfig-python (0.8.4-2 -> 0.8.4-3)
[2012-03-21 14:27] upgraded ccsm (0.8.4-2 -> 0.8.4-3)
[2012-03-21 14:27] upgraded compiz-bcop (0.8.8-1 -> 0.8.8-2)
[2012-03-21 14:27] upgraded compiz-fusion-plugins-main (0.8.8-1 -> 0.8.8-2)
[2012-03-21 14:27] upgraded compiz-fusion-plugins-extra (0.8.8-1 -> 0.8.8-2)
[2012-03-21 14:27] upgraded compizconfig-backend-gconf (0.8.8-1 -> 0.8.8-2)
[2012-03-21 14:27] upgraded device-mapper (2.02.90-1 -> 2.02.95-1)
[2012-03-21 14:27] upgraded emerald-themes (0.6.0-3 -> 0.6.0-4)
[2012-03-21 14:27] upgraded ffmpeg (20120127-3 -> 20120317-1)
[2012-03-21 14:27] upgraded fusion-icon (20101021-1 -> 20120321-1)
[2012-03-21 14:27] upgraded libtasn1 (2.9-2 -> 2.12-1)
[2012-03-21 14:27] upgraded gnutls (3.0.15-1 -> 3.0.17-1)
[2012-03-21 14:27] upgraded grub2-common (1:1.99-6 -> 1:2.00beta2-2)
[2012-03-21 14:27] upgraded grub2-bios (1:1.99-6 -> 1:2.00beta2-2)
[2012-03-21 14:27] upgraded iproute2 (3.2.0-2 -> 3.2.0-3)
[2012-03-21 14:27] upgraded libdrm (2.4.31-1 -> 2.4.32-1)
[2012-03-21 14:27] upgraded lib32-libdrm (2.4.31-1 -> 2.4.32-1)
[2012-03-21 14:27] upgraded lib32-libice (1.0.7-2 -> 1.0.8-1)
[2012-03-21 14:27] upgraded lib32-libxdmcp (1.1.0-2 -> 1.1.1-1)
[2012-03-21 14:27] upgraded lib32-libxcb (1.8.1-1 -> 1.8.1-2)
[2012-03-21 14:27] upgraded lib32-libx11 (1.4.99.901-1 -> 1.4.99.901-2)
[2012-03-21 14:27] upgraded lib32-libxcomposite (0.4.3-2 -> 0.4.3-3)
[2012-03-21 14:27] upgraded lib32-libxext (1.3.0-1 -> 1.3.1-1)
[2012-03-21 14:27] upgraded lib32-libxinerama (1.1.1-2 -> 1.1.2-1)
[2012-03-21 14:27] upgraded lib32-libxrandr (1.3.2-1 -> 1.3.2-2)
[2012-03-21 14:27] upgraded lib32-libxtst (1.2.0-2 -> 1.2.1-1)
[2012-03-21 14:27] upgraded lib32-libxxf86vm (1.1.1-2 -> 1.1.2-1)
[2012-03-21 14:27] upgraded lib32-util-linux (2.20.1-1 -> 2.21-1)
[2012-03-21 14:27] upgraded libftdi (0.19-1 -> 0.20-1)
[2012-03-21 14:27] upgraded linux (3.2.11-1 -> 3.2.12-1)
[2012-03-21 14:27] upgraded live-media (2012.02.29-2 -> 2012.03.20-1)
[2012-03-21 14:27] upgraded lvm2 (2.02.90-1 -> 2.02.95-1)
[2012-03-21 14:27] upgraded mpg123 (1.13.4-2 -> 1.13.6-1)
[2012-03-21 14:27] upgraded neon (0.29.6-3 -> 0.29.6-4)
[2012-03-21 14:28] upgraded openssl (1.0.0.h-1 -> 1.0.1-1)
[2012-03-21 14:28] upgraded psmisc (22.15-1 -> 22.16-1)
[2012-03-21 14:28] upgraded systemd-arch-units (20120311-1 -> 20120317-1)
[2012-03-21 14:28] upgraded vlc (2.0.0-8 -> 2.0.1-1)
[2012-03-21 14:28] upgraded xf86-input-evdev (2.7.0-1 -> 2.7.0-2)
Last edited by David Batson (2012-03-21 21:10:35)

IWeb won't start after update

Hey!
I just ran a bunch of system updates and now iWeb won't start. I reinstalled iLife'06 from the DVD and rebooted, but no luck. I have also repaired permissions and rebooted. I just get one bounce in the Dock and this message in the iWeb.crash.log:
Host Name: Garry-Computer.local
Date/Time: 2006-03-30 04:09:56 -0500
OS Version: 10.3.9 (Build 7W98)
Report Version: 2
Command: iWeb
Path: /Applications/iWeb.app/Contents/MacOS/iWeb
Version: ??? (???)
PID: 478
Thread: Unknown
Link (dyld) error:
dyld: /Applications/iWeb.app/Contents/MacOS/iWeb can't open library: @executable_path/../Frameworks/SFAnimation.framework/SFAnimation (No such file or directory, errno = 2)
iMac Mac OS X (10.3.9) G4

Sounds like something major is missing from iWeb or from the iLife install.
If you didn't delete iWeb and the install package receipts from your computer before reinstalling iLife, iWeb would have only been updated. If it was corrupted before the update, the problem would not have been fixed by a reinstall.
Backup your domain file before doing anything else! It's in username/Library/Application Support/iWeb. Put a copy in a safe place.
Then try deleting everything to do with iWeb from your computer, going to drivename/Library/Receipts and deleting all the iWeb package receipts, empty the trash.
Reinstall iWeb.
Michael
Quicksilver G4 Dual 1GHz Mac OS X (10.4.5) http://www.rowan-cottage.co.uk

Ipad won't start after updating to ios 8.1.3

My iPad was working without issue prior to updating to IOS 8.1.3 yesterday. After updating, not only would the ipad not start, it produced intermittent tones. The tone heard when device is plugged into an outlet for charging.
I attempted to turn the device off but it would not respond. Afterwards, a reboot was attempted numerous times by holding the home and sleep buttons down simultaneously. Once the Apple logo appeared the buttons were released, the logo disappeared but the device remained dormant.
While connected to iTunes and emitting the connection tones, periodically the splash screen would appear momentarily then turn off. I was able to swipe the screen on one of these occasions. The device worked properly until it was turned off after use at which time it would not turn on again and remains unable to turn on. It does not respond to attempts to turn it off or rebooting.
Prior to the update I did backup the device in case something like this would occur. Since I appear to have exhausted all my options to get the device to work, I feel the only remaining option is to restore it to factory default. I would appreciate advice from anyone who may either have experienced this same issue and found a resolution, or can provide thoughts on how I should proceed please.
If I proceed with a restore to factory default followed by a restore of the most recent backup, will I lose any data during this process? This will be my first time to erase a device so any thoughts would be greatly appreciated. I would, of course, prefer an alternative resolution. Thanks in advance for your help.
tony

Hello, Tony.
Thank you for visiting Apple Support Communities.
I understand that your iPad no long starts after an update and you have a backup for your iPad. It sounds like you will need to restore the device to factory and then will have the option to access your backup after the restore complete. The only information that should be missing would be after the backup was completed until the device is restored. I have included the steps for going through this process in the articles below.
If you can't update or restore your iPhone, iPad, or iPod touch
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
-Jason H.

Illustrator won't start after updating to the latest version

After updating to the latest version of Illustrator CC (2014), I've been unabled to start the app. Kept crashing. Basically can't even open the file!

mmyazid,
Here is the Extensions Suitcase 5 update that may solve the issue.
http://www.extensis.com/support/product-support/suitcase-fusion-5/

Mac won't start after update to Yosemite

After updating my MacBook Pro 13" to Mac OS X Yosemite, it became so slow (only went to the Apple Community after this problem and found other users experienced the same) so I restarted it. Because restarting, too, took a while, I shut it down by holding down the power button instead. Now, when I boot my Mac, it shows the Apple logo with the progress bar but it goes up to about one-fourth progress then shows an error/stop icon. Can't get through the login screen. How do I fix this?

Solved by going back to 3.5.10. All settings and bookmarks came back. Won't be upgrading again anytime soon - or will be switching to Chrome!

ITunes won't start after update

Hi,
I just upgraded my ITunes using the normal Apple update process when I was prompted - and now I-Tunes won't start at all.
I can see the ITunes.exe start in Windows Task Manager....then it just shuts down again.
Any ideas ?

I tried another solution :
1. Un-install I-Tunes
2. In-install Bonjour
3. Reboot
4. Install latest I-Tunes
This seems to have fixed the problem.
So it looks like BONJOUR IS THE PROBLEM.

Firefox won't start after updating

Firefox recently completed an auto-update, however now the software won't load.
If I click on the Firefox icon, I get the Windows egg timer for about 10 seconds, then the pointer reverts to normal and nothing happens. If I open Task Manager at the same time, when I click on the Firefox icon, I see the application listed for approximately 5 seconds, then it's removed from the list.
I have tried running in compatibility mode, as well as removing and re-installing, neither of which have helped.
Can you advise, please ?

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.

IMovie won't start after update to 7.1

Just installed the update this morning, and iMovie won't start up any more...
I searched here but there are so many things that come up... but none of which look like this problem.
I've trashed prefs, restarted... nada. Didn't try reinstalling and -not- updating yet.
Any help appreciated-
thanks,
Andrew

had the same problem with my iMovie and thanks to this discussion, i removed 3 DivX Plug Ins, restarted and iMovie worked fine.
dragged back the latest DivX Plug In (6.4.0) and iMovie's still running ok.
i'm guessing the culprit's either the Decoder 6.0.5 and/or DivX 5, both of which were also installed and now removed.
i still have Flip4Mac installed in Library/QuickTime.

Blackberry 9220 won't start after updating OS

Similar Messages

Maybe you are looking for