Blackberry 9300 solution for mep code (0 left)

Hi
Blackberry 9300 solution for mep code (0 left)
Help me please
Thanks...

Hi and Welcome to the Forums!
With zero tries left, there is only one official solution -- sending your BB to the RIM factory to have it totally reset. Your methods of requesting this service are the same as for all BB service...via your wireless service provider. If they refuse or if you have no warranty (due to a variety of reasons, this can be the case), then you must request this via paid incident support:
http://us.blackberry.com/support/programs/technical/incident.jsp
Be advised that, while I have no personal experience with this, it is my opinion that the cost of having this done will exceed the cost of just buying a new BB.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Fix for MEP code 0 left

    Unfortunately, the "rom booter" did not work. I have downloaded the desktop manager software from Blackberry suppport and have run that program also. Still no solution to the problem. Any other ideas?

    Hello!
    I've no idea what a "rom booter" is...maybe you are talking about something in a different thread. Nevertheless, there is NO LEGAL means for anyone but the RIM factory to recover your situation...
    If you have used up all of your chances to enter the correct unlock code, there is nothing further you can do. Even if you happen to have now the correct code, it is useless. Only the factory can now (legally) unlock your BB. Typically, I've heard that the cost of having RIM do this for you will be greater than the cost of just buying a new one. But, you are able to ask them...see here:
    http://us.blackberry.com/support/programs/technical/incident.jsp
    Note, however, that this process will start with a fee...
    If you obtained your unlock code from somewhere but it was incorrect, your recourse could be with them -- however, they may well question why you exhausted all 10 attempts before contacting them.
    If your BB was already MEP locked and you obtained it from a source that represented it as being able to be unlocked, then your recourse would be with the seller you obtained it from.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unlock my blackberry Curve 8520: Enter service provider mep code (0) left

    Good afternoon,
    A few days ago I bought a BB Curve 8520 from a friend but the phone says:
    "enter service provider mep code (0) left"
    Is it possible to fix this problem?
    Regards,
    Julian 

    Someone tried too many bad attempts to enter an unlock code in the device.
    After the ten attempts have been used, you must get RIM to unlock the device.
    There are two routes, and only two, to achieve this.
    * IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
    * If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
    Make sense? Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to unlock Q10 when 0 attempts to enter MEP code are left

    Hi,
    How to unlock Q10 when 0 attempts to enter MEP code are left?
    Thanks.
    Laurent

    Hey BBLaurent,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    To unlock the BlackBerry Q10 smartphone, please contact your network service provider or point of sale.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Network MEP code (0: left)

    My bb 8520 curve say enter network MEP code (0: left) I got as a gift from my friend in uk, so I entered wrong code many times, can u help a solutio plz!

    After the ten attempts have been used, you must get RIM to unlock the device.
    There are two routes, and only two, to achieve this.
    * IF your device is in warranty, contact your service provider technical support. Tell them you have this issue which needs to be escalated to RIM level customer support. I'll warn you that most carrier technical support people will first assume and think you are referring to a device security unlock, and you will need to convince them otherwise and explain clearly what you need. THEY will not be able to help you because the carriers themselves cannot unlock a device which has had the MEP code attempts depleted, and should (and you will need to ask) to have the case escalated to RIM level tech support.
    * If your device is out of warranty, contact RIM direct. See the Contact Us information from the website: http://ca.blackberry.com/contact/ The options you want to select to speak to BlackBerry Customer Care are 3 (for inquiries, orders, billing, e-RMA etc) then 5 (e-RMA and Out of Warranty).
    Make sense? Good luck.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Enter network MEP code (0 left)

    I have PIN, IMEI, MEP & MEP2 codes but i can't unlock my blackberry 9300. What can I do now?

    Why do you need to unlock, your service provider can help, they contact blackberry and get the code but you get charged £20/£30 for it. Take to a shop that do repairs, they can do it for aroun £10.
    Craig Ashcroft Elite UK
    If this post helps you please click the LIKE below the post(s)

  • MEP code (0 left)

    Hi!
    My request would be somewhat not ordinary, but I have nowhere else to turn, because I live in Russia ... :-(
    Saw the phone BB Curve 8900 and fell in love. Ordered through e-bay. They sent, but only for T-mobil.
    One "very intelligent" people advised to enter 10 times Network Mep code, which I did. :-(
    How can I be? T-mobil we do not.
    P.S. Sorry for my English.
    {edited for privacy}
    Roman.

    Hi and Welcome to the Forums!
    If I understand you correctly, the "very intelligent" people you trusted gave you very bad information. After attempting (and failing) to enter the proper unlock code 10 times, the device is permanently locked to the original carrier, and cannot be unlocked. What you needed was the proper unlock code (which can be purchased) and to have entered that...doing so would have unlocked the BB from TMobile, allowing you to put a different carriers SIM into it and use it. Now you cannot do that. And there is no fix that I know of.
    Sorry.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Any solutions for error code r6034

    anyone find a solution for fixing error code r6034?

    Hi fcianci,
    If you are having issues with iTunes after an attempted update, you may find the following article helpful:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Regards,
    - Brenden

  • Solution for Error Code 148:3

    So had this error and been looking around to see if I could find a solution on the forums or the support section and could not find a concrete answer. However I did read (here http://forums.adobe.com/message/1659492#1659492) something which reminded me of changes I had made to my boot sequence recently that I decided to check up on.
    I try to keep a lean system so I try and turn off services and programs from starting up when I dont need them.
    This problem for me has been cause by turning off the "FLEXnet Licensing Service" through msconfig. When it was turned back on and I rebooted problem solved.
    For those that are unsure if thats it and dont know what I am on about follow these instructions:
    (Warning: If you dont know what your doing with the book sequence or msconfig, follow the instructions and leave everything else alone. Using this tool can cause untold problems if you dont know what your doing and you dont closely follow instructions)
    1.- Press "Windows Key" + R on your keyboard or click the Start button (bottom left of screen)  and then select Run.
    2.- Type "msconfig" (without the quotes) and hit return.
    3.- System configuration window will come up, select the Services tab.
    4.- Select "Hide all Microsoft Services" and look for "FLEXnet Licensing Service".
    5.- Ensure "FLEXnet Licensing Service" is selected
    6.- Click Apply and then Close and choose to reboot your machine.
    7.- When Windows starts up again there should be a window telling you a change has been made, tick the box so it does not come up again and click ok.
    Your problem should be solved, I hope. Worked for me. I also tested it, any time I turn it off Dreamweaver stops working and when its turned back on its fine.
    Hope this helps
    Ethnod

    wow...wssparky  thanks a TON. I got the adobe error today and it was driving me INSANE. I *think* the problem had to do with my having to disable all my startup stuff in Windows7 to fix a problem I was having updating some other Microsoft software. Anyway MS said  disable everything using the msconfig and it was after that when Adobe stopped functioning (my McAfee is having an issue as well) properly.
    At any rate I got the adobe "fix" and it worked GREAT!
    I was NOT having any luck to begin with by going to the support area at adobe.com (HEY ADOBE PEOPLE>> TAKE NOTE)
    searching "support" for the error code tells me "Your search of Support for error 148:3 did not match any documents." which I find interesting
    so I finally googled the error code and found this thread.
    now a word to those who are less than kind in their posts and make people feel  stupid for asking the question here...I would submit these forums are for us (the users) to help each other (read: be nice to each other) so we can USE the software we OWN.
    I'm frankly disappointed that going to the Adobe "SUPPORT" was fruitless. MY problem was with the CS4 suite: I own the master collection which wasn't exactly cheap....it wold be nice if I, as a customer was able to at least FIND Adobe's OWN error code on their support section.
    again... thanks to wssparky

  • Solution for error code: 4SNS/1/40000000/IBOR-9.426

    My computer recently has been running at its best. I did a diagnostic and gave me an error code 4SNS/1/40000000/IBOR-9.426. I wanted to get an idea what this means and what is the solution?

    That indicates an internal sensor failure.  You will have to take your MBP to an Apple store genius bar for repairs.
    Ciao.

  • Want a better solution for radiobutton code

    I am using radio buttons the code works but it seems very long winded any ideas how I can cut down the code?
    // code snippet
    //basicly decare some JRadioButton
    //set action command
    currentaccount = new JRadioButton("Current Account");
    currentaccount.setMnemonic(KeyEvent.VK_C);
    currentaccount.setSelected(true);
    currentaccount.setActionCommand(currentACString);
    panelRadioButtonAC.add(currentaccount);
    savingaccount = new JRadioButton("Saving Account");
    // Group the radio buttons.
    ButtonGroup group = new ButtonGroup();
    group.add(currentaccount);
    group.add(savingaccount);
    // Register a listener for the radio buttons.
    RadioListener myListener = new RadioListener();
    currentaccount.addActionListener(myListener);
    currentaccount.addActionListener(myListener);
    //here is the code check which is very long winded
    /* I am checking each radiobutton and then determining if it is true, since I have used a button group isn't there a way I can find out which is chosen????
    /** Listens to the radio buttons. */
    class RadioListener implements ActionListener {
    public void actionPerformed(ActionEvent e) {
    if ( e.getActionCommand().equals("Current Account") )
    {       curAC = true;
    savAC = false;
    if( e.getActionCommand().equals("Saving Account") )
    {      savAC = true;
    debAC = false;
    Please help

    See my answer in
    http://forum.java.sun.com/thread.jsp?forum=54&thread=196354
    ... and please don't post a question 20 times...
    Doug

  • ODI Solutions for release code

    Hi Guys,
    Got few quries regarding ODI Solutions and how to use them.
    Once we finish our development can we used ODI Solutions to release the
    code(scenarios) into TEST/PROD and at the same time we also need to release whole code into hotfix environment(development work repository).
    The question is if there is an error in one of the interfaces we will fix the bug
    in the development environment and if we want to sync development with hotfix,how can we do that using ODI Solutions?
    do we need to build one more ODI Solution(whole project which includes the
    changed interface) and import that into HOTFIX environment?
    If it is yes,i have tried that but iam not getting that changed interface properly updated with the change?iam still having same old interface.any ideas? and how to appraoch this kind of scenario?
    Any idea about this?
    Cheers

    Hi,
    personally i dislike ODI Solution. Historically they had got so many issue to trust them once more..
    By the way, i face versioning duplicating the object and working on the copy. Remember that, if you restore a solution, any later development will be lost.
    Another way, suggested me by my personal Guru is to use solutions, create another repo (called EMERGENCY REPO) and restore solutions into this repo to fix it.

  • 0 try left mep code

    I tried to unlock my curve 3G with the mep code which was provided by my phone supllier, but there is now 0 try left for this mep code. I cannot change my sim card then... How should i do to unlock my phone? Many thanks

    Hello lantez 
    Welcome to BlackBerry Support Community Forums
                You should not have entered 10 wrong mep code now it locked and you can contact your Carrier  and see if they can forward the case to RIM for you as now only RIM can reset the mep counter.Also look at this thread it might help MEP code (0 left) on Blackberry .
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • No MEP code in the escreen !!

    Hi,
    My Q10 was hard reseted during a keyboard exchange by the constructor (under warranty) and no longer desimlocked. I obtained an official code and the network and sub-network are now unlocked as told in the security menu but I am reaquested for a MEP code and could not connect to the network.
    I went into the 'escreen' and the "OS Engineering Screens" and "Device Info" menus but not MEP codes are listed !
    Can anybody help me ?
    Thanks in advance.
    econseiller

    If your phone was working before the person did that hard reset I would go back to them first.
    If that person can't help you, check with your carrier and see if they can escalate to BlackBerry if they (carrier) can't resolve it.
    Another option is to use the BlackBerry Incident-Based Support located at
    http://us.blackberry.com/support/programs/technical/incident.html#tab-1
    Take a look at some similar threads too:
    http://supportforums.blackberry.com/t5/BlackBerry-Storm/Mep-code-0-left/m-p/2181779/highlight/true#M...
    http://supportforums.blackberry.com/t5/BlackBerry-Bold/MEP-unlock-code/m-p/1796657#M120320
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!
    Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

  • Restart after MEP code entered

    Dear all,
    I have a blackberry curve 8520 and I am experiencing a problem.
    My device is locked after I accidentally used a wrong SIM-card. Now the device is asking for a MEP code (10 tries left).
    I legally obtained a correct MEP code. Unfortunately the blackberry restarts/crashes immediately after the MEP code is given (this happens with any code entered, correct or incorrect like '0000').
    When rebooted, the device is still asking for a MEP code and still shows that there are 10 tries left (so obviously the code is not being processed).
    This seems to be a common occurring problem with multiple blackberry devices. For example see:
    - http://forum.gsmhosting.com/vbb/f272/blackberry-restarting-each-time-mep-code-entered-952753/
    - http://forum.gsmhosting.com/vbb/f489/8520-restarts-after-i-put-mep-code-1298217/
    - http://forum.gsmhosting.com/vbb/f489/hang-restart-when-entering-mep-code-1328313/
    Is this a hardware problem? How can this be fixed? Do I have to send my phone to RIM? (if so, where//how)

    From what I understand that I have been told, after the 10 unlock attempts, RIM is the only one who can physically remove the carrier lock, and it must be done physically by them, with the device in their hand.
    I would recommend that you contact your carrier and ask for RIM level tech support, and inquire there. The forums here won't get you that support.
    Message Edited by JSanders on 04-06-2009 03:50 PM
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for