Blackberry 9320 will not connect to tv.

I have a 42" Hissense tv & everytime try to view the contents on my phone by connecting via usb, the tv does not pick it up & says no device. What do I do to connect?

Well, I've no idea about connecting a phone which will work on a TV.. Because, the DATA cable which provides access only to the SD card files since it is considered as a removable mass storage.. But the phone contents will not appear though it needs the blackberry desktop manager even to access in PC.
From what I understood is that you need HDMI or similar support.. but still accessing phone will not be possible..
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support.

Similar Messages

My blackberry 9320 will not switch on

Hello I have a blackberry 9320 and i havent used it in about 4 months I tried to charge it earlier it wouldnt charge the red light would stay on for apporoximatley 40 seconds and then it would go off and the screen would stay blank
Can someone tell me a solution as sooon as poosible much apppriciated

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry 9900 will not connect with Blackberry Desktop (v 6 or v7). I am running Windows 7.

I am running Windows 7, and have a Blackberry Bold 9900. This has some music on but most importantly my work diary and contacts which I synchronise through Desktop. I also use it as an external modem and tether my PC through it if I’m somewhere with no wireless.
Yesterday, I did these things during the afternoon:
·         Connected a Bluetooth device to my PC (headphones)
·         Needed to load a series of drivers for Windows for this to work
·         Upgraded from Blackberry Desktop 6 to 7 (following prompt when connected)
·         Set up a Bluetooth connection between my Blackberry and PC.
The next time I connected:
·         On The Blackberry smartphone I got the normal Blackberry is plugged in message, with normal options (USB Drive / Sync Media / Charge Only), and software opened as usual
·         But I was prompted to Connect Your Blackberry Device (with link to troubleshoot connection). Clicking this, I was taken to a page which suggested I check the cable etc. (which I did, all OK) and “...turn off synchronization applications or antivirus applications temporarily”. I disabled Avast, which made no difference, and I don’t know what a “synchronization application” is
·         Other aspects of the connection are working (i.e. I can still download photographs from the Blackberry, and still see it as the ‘F:’ drive)
I therefore conclude that:
·         Cable / physical connection is good (also tried a different cable - no change)
·         Something I had changed had corrupted things, so:
·         Uninstalled Blackberry Desktop v7 and replaced with the version I had been using successfully until yesterday (v6)
·         Removed the Bluetooth connection to my Blackberry.
Made no difference, so checked Blackberry help forums, which confused me more. One thing which I did discover, was that in Device Manager, although Blackberry is visible attached to PC (and says it is working correctly), it DOES NOT appear in the list of Network Adapters (I don’t know if it did before, but one answer in the tech forum suggested this is significant – though not sure why or what to do about it)
Any help would be very welcome – been at this for ten hours now and making no progress!
Many thanks
Clive

This worked for me after several hours on the phone with Blackberry Support. I hope it works for you too:
Finally got it working again! Re-downloaded the desktop software (but when you start it up, make sure to uncheck the automatic update option). While that was downloading, I was instructed to go to microsoft.com and search for and download .NET Framework 3.5. Once you click to download that, there will be an offer to download 2 other items. One of which will be Microsoft .NET Framework 4 Client Profile (Web Installer). Click to download that too. Once they are finished downloading, run both files. .Net Framework 4 Client Profile will take longer and will ask you if you want to repair or remove. Choose repair. The repair took several minutes, but once it was done, I clicked "Finish", opened the BB Desktop Software, UNCHECKED THE AUTO UPDATE OPTION, and plugged in my phone. Once windows finished installing the drivers, Low and behold! The Desktop software recognized that the phone was connected! I hope this helps you resolve your issue as well. When it again offered me an update I clicked to update later (meaning never!). Best of luck to you.

Ipad will not connect to blackberry 9930 hot spot

my Ipad just will not connect to my blackberry mobile hotspot, everything else i have will connect but the ipad just will not. any ideas?

i have this issue also on my iPad. Whats the solution?

Blackberry will not connect to wi-fi

blackberry will not connect to the internet via wi-fi - problem started intermittently, got more frequent, and now will not connect at all

I had same problem but it start to work just leven it on will connect put router # in and see what you get hope this will help.

Remote app on my iphone 5 will not connect to itunes

The remote app stopped working on my iphone 5 and will not connect to itunes. Home sharing is on on itunes and adding new library on my remote iphone app results in veryfying passcode results in the following message on itunes 'the pascode you have entered is incorrect'. I have the feeling that the library is already added but will not connect. Any suggestions are deeply appreciated!

I had the same problem. Reinstalled everything and still nothing. Came across this article:
5 Simple Tricks to Get iTunes to Recognize an iOS Device
Quit and relaunch iTunes
Connect the iOS device to a different USB port on the computer
Reboot the iPhone, iPad, or iPod
Reboot the computer
Use a different syncing cable (if possible)
I changed my syncing cable and it worked! Try that if all else is failing.

My Deskjet 3050 J610 will not connect to my Virgin WiFi router for use with Apple Mac laptop.

I live in the UK and have Broadband access via a Virgin connection and WiFi router. My Apple MacBook laptop connects to the WiFi with no difficulties. However I have an HP Deskjet 3050 J610 printer which will not connect to the router. When I try to connect, the blue light just keeps on flashing but a connection is not found. Consequently my MacBook cannot "see" the printer on the network. Any suggestions? Thanks!

See if this helps.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

My hp c4599 printer will not connect to my wireless network

My hp c4599 printer will not connect to my wireless network or show up on my computer during the installation even though it is usb connected. But it managed to create its own network where i can print wirelessly by selecting it sort of like bluetooth… I have installed different softwares from the hp website and looked at so many different forums but i cant find the answer. I have reset the printer and wireless network and god knows whatelse. I can also print fine through the usb cable, it just will not connect to my wireless network. I am going crazy P.S. once upon a time it was connected to my wireless network but i cant remember what happened.
So can someone please help and please dont be too technical

Hi ..
Try these support articles ..
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
Mac Basics: Printing in OS X

HP C4740 will not connect wirelessly to HP desktop

I have an old HP desktop (prob Pavillion) running Win XP Pro w/ SP 3. I have 2 MB RAM. I purchased an HP C4740 AIO printer about 6 months ago. At first it hooked up fine and performed very well in wireless mode. Then when replacing an ink cartridge one of the retainer tabs broke. Long story short I had to replace the unit. HP gladly did so and I got a brand new one.
When I got the new one I hooked it up and installed the software exactly per the instructions for use as a wireless printer. Unfortunately, no matter what I do it will not connect to my wireless network. The only way to use this printer is via USB cable. Two things happen that I find interesting: it does not recognize the printer (even thought it's connected by USB cable) and it doesn't recognize my wireless network (even though it does recognize another unknown network). Even when I try to manually enter my network SSID and Passphrase it will not recognize it. I have also tried unsecuring the network but still no success.
The network is secured but I have the SSID and passphrase information. For reference, I have a Dell laptop and Lexmark printer that connect without issue. My iPhone 4 connects without issue. This C4740 will not. I have uninstalled the software and even gone into the registery to locate and remove any entries associated with this printer. Still nothing works in wireless mode.
Need help. I am by no means a computer expert, especially with networking. I know enough to be dangerous but still make it through the day! I'm ready to toss this and pay the much higher price for the much more usable Lexmark! Only problem is I'm just cheap enough that I'm willing to try to make this printer work.
Thanks!

Hi,
Download the latest installer software for your printer on the link below and save it to the Desktop.
ftp://ftp.hp.com/pub/softlib/software11/COL28119/mp-71555-3/PS_AIO_06_C4700_USW_Full_Win_enu_140_175...
Next download and install Revo Uninstaller from the link below.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect your printer from your PC.
Run revo and use it to uninstall your printer software. Right click on the icon of the program you wish to remove and select Uninstall. During the process you may be asked to delete registry entries, just select all and then click delete. Do the same for any left over files and folders. Once the uninstall has completed, reboot the PC.
Temporarily disable any security software ( Antivirus and Antispyware )
Now try running the software installer from your Desktop by double clicking the installer. Do not connect the printer to the PC until the software asks ( Whether wired or wirelessly ). If everything install Ok, remember to enable your security software.
Hope this helps.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Apple TV (1st gen) will not connect to iTunes

I am at wit's end. Until a couple of days ago, my 1st gen Apple TV connected fine to iTunes. Now, it will not connect no matter what. I have tried the following:
1) restart both ATV and my machine (Win 7 running iTunes 10.7)
2) restored ATV factory settings and reinstalled software
3) hard-wire via ethernet to my computer (which some articles seemed to indicate should work - nothing happened)
4) hard-wired both my cpu and ATV to a router - nothing shows up
5) removed and reinstalled all Apple programs, including iTunes, QT and ancillary
6) vaired between hard-wired internet connection and wireless for ATV
7) did everything on this page, including open ports manually http://support.apple.com/kb/TS1453
Most frustrating of all, my wife sees the device instantly in her iTunes. AGHH!

Same thing happened to me, starting right after I updated the Apple TV firmware. I restarted both devices to no avail. I can, however, play my itunes library content from the apple TV's "computer" app. So there must be some kind of connection. What I've lost is the ability to stream music from iTunes using AppleTV as an "airplay" device.

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Just updated my iphone 4s to the new IOS6 and now my wifi is bringing up an itunes page and will not connect?

i just updated my iphone 4s with the new IOS6 update and now everytime i try to connect to my wifi it brings me to the apple page and will not connect to the wifi at all.. someone please help

I have the same problem, no way to change the old username in icloud on my ipad after update to ios7. Enybody knows a solution or where to look for a solution?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

Brand New C309g will not connect wirelessly with ANY wireless security options enabled

Printer will connect via wired ethernet. I can use the http utility.
Printer will connect via unsecured wireless connection.
Printer defaults to autoconfig (169.xxx)when connected via WEP (both open and shared), will not connect with a manual IP address. Cannot access http utility.
Printer won't even autoconfig when connected via WPA-Personal - instead says "No connection found."
Printer is in the same uncluttered room as the router.
ALL OTHER wireless network devices work fine and keep up with security changes.
I have legacy devices on the network that make me want to run with WEP.
I've run the HP Network Diagnostic. It can access my router just fine. It cannot find the printer.
Router is D-Link DIR-655.
I jump through the right hoops - refresh router, restore factory defaults on printer, etc. All other wireless network devices work fine.
I want to pull an "Office Space" on this brand-new printer - please save me from doing so!
-mooi
This question was solved.
View Solution.

Ooops, my mistake. Thanks for pointing it out.
Another idea is to make sure the firmware is updated on the router.
Also, from the control panel of the printer: Setup > Network > Wireless Network Test. It will self-test the printer radio.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

New WIFI card will NOT connect correctly.

Hi,
I just purchased a Gigafast WF748-CUI wireless card for my iMac G3 running Mac OS X Tiger (10.4.10) and I followed the instructions exactly and did everything right but it will NOT connect. It keeps generating these weird IP addresses beginning with 168. but my networks IP address begins with 192. I had the same problem with my previous WIFI card on the iMac but it would work eventually. I have been messing with this one for like 2 hours and it has shown no sign of working. I even entered a manual IP address in but still nothing. The program for the wireless card says its connected but it is not (or isnt connected to the right IP anyway). What do I do?

Sooo, there's no way the CP has to "Join" a Network? Just says you're connected to 169.x.x.x?
Might try making a New Location in Network CP, turn off all other Ports, the set the IPv4 settings to Manually...
IP: 192.168.0.5
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
Assuming the Router is 192.168.0.1, but change the 2nd & 3rd digits accorcdingly.

Blackberry 9320 will not connect to tv.

Similar Messages

Maybe you are looking for