BLACKBERRY 9860 FREEZES ON FEW SECONDS AFTER GETTING TO HOMESCREEN

I HAD A PRIOR ISSUE WITH THIS 9860, IT WAS NOT COMPLETING ITS BOOTING PROCESS, IT HANGS WHEN ITS 80% DONE, SO I HAD TO DOWNLOAD THE DEVICE SOFTWARE AND RELOAD THE OS AS RECOMMENDED, THIS WAS A BIT DIFFICULT INITALLY, BUT EVENTUALLY GOT THROUGH IT.
HAVING DONE THAT MY PHONE NOW BOOTED AFTER COMPLETING THE RELOADING PROCESS AND ON GETTING TO THE HOME SCREEN, IT JUST HANGS FEW SECONDS AFTER, NOTHING RESPONDS, I REMOVED THE BATTERY SEVERAL TIMES, IT WAS STILL D SAME THING, I HAD TO RELOAD THE OS AGAIN STILL THE SAME THING, EVEN TRIED BOOTING IN THE SAFE MODE STILL D SAME THING, THIS IS THE MUCH I KNOW, IVE TRIED THEM ALL AND THE PHONE STILL KEEPS HANGING, PLEASE HOW DO I GO ABOUT THIS BECAUSE I AM A BIT CONFUSED.....THANKS

Once you get in to Safe Mode, can you do to Options > Device > Application Management?
And delete any applications you have installed.
ALSO, can you please turn off your ALL CAPS key when typing in the forum here? Makes it hard to read... thanks.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Mouse cursor freezes a few seconds after start-up? Need help!

    Laptop: Samsung Series 9
    OS: Windows 8.1
    Problem: since booting up my computer today, my cursor will freeze about 30 seconds after boot-up. Prior to this, I'll be able to move my cursor for a few seconds as I normally would, but then I will inevitably see the blue loading circle next to the cursor
    and then my cursor will be frozen in place. I can still use my keyboard/everything else functions regularly. I decided to boot up my computer in safe mode and my cursor works fine. Clearly then, there must be some software/start-up issue? 
    I should note that I used my laptop fine yesterday night. When I booted it up today my cursor froze and I saw the restart prompt that said windows will restart on its own in 1 day to update. So I updated/restarted and the problem persists. 

    Hi,
    Mostly, this issue is caused by third party services or programs conflict problem.
    Please use Clean Boot to troubleshoot:
    How to perform a clean boot in Windows 8.1, Windows 8, Windows 7, or Windows Vista
    http://support.microsoft.com/kb/929135
    In addition, please check and install the mouse driver from the vender official website.
    Karen Hu
    TechNet Community Support

  • Address  Book freezes a few seconds after opening:  'non-reponsive'

    Address Book Menus show but get beach ball of death in a few seconds. Does open normally under alternate user. Status: have reloaded and updated 15.3 with auto restoration of settings and have deleted various Address Book .plists and all 'Address Book Files' all to no avail. User doesn't use Mail, but has Skype operating. Haven't checked to see if Mail opens correctly. Obviously I can't open permission. i'll need help on how to implement suggestions. Thanks in advance.

    I fixed the problem. FYI, it was a font problem. It turns out that somehow I had acquired a duplicate of Helvetica. I could tell there was a duplicate because there was a bullet to the right of the listing in FontBook.
    To fix, highlight the font (Helvetica) and go to Edit/Resolve Duplicates.
    Address Book now opens and I can access all my contacts.
    In addition, it resolved a problem I had with the computer not shutting down. AND it resolved the problem of my Mail icon in the Dock not showing the little red circle when I had unread mail.
    I am thrilled.
    Help this might help anyone else.
    Sincerely,
    Gale

  • ITunes 7.0.2 freezes a few seconds after I open it

    Every time I open my iTunes, it works fine for about 2-3 seconds (enough time for me to go to my music library or to connect to the iTunes store) and then it completely freezes. Nothing looks different on the screen, but I can't scroll, play any music, change folders, or do anything. When I open task manager, it says iTunes is not responding.
    I uninstalled Quicktime (and then deleted the quicktime folders from "Program Folders" and "C:\Windows\system32\"), restarted my computer, turned off my security anti-virus program and then repaired iTunes, but that didn't change anything.
    No error messages come up or anything like that; it just freezes every time. Thank you for any help you can give.

    I have OS 3.1.3 and around 10 smart playlists. I used to turn off Live Updating when I'd sync my smart playlists, but when I updated to the latest OS, I left it on because I thought they had fixed it. >_<
    I can't look at my smart playlists right now because iTunes isn't recognizing my iTouch at the moment -- the iTunes and Music app problems occurred at the same time, and I was hoping that fixing the Music app problem would also fix the iTunes problem.
    ... While I was writing this response, I used MediaMonkey to +sort of+ fix the problem. My iTouch was appearing in MediaMonkey with no songs; I added a song to my iTouch using MediaMonkey, and after that the Music app worked and iTunes recognized my iTouch. Yay!
    However, I can't see most of my music library -- I only see the songs I had purchased on my iTouch. I suspect that the rest of my music is still floating around on my iTouch somewhere, though, because now I have a big chunk of memory taken up by (orange) Other data.

  • ITunes freezes a few seconds after opening

    When I open iTunes it freezes up and the task manager says that iTunes is "not responding" while everything else works normally.

    Ok I have been working on this one for a few days now with no success. This is what has happened so far....
    About a week or two ago iCal started crashing on startup. When this started it also brought up a conflict window involving 4 conflicts. They all seemed to be recurring events (birthdays etc..). The conflict seemed to be in the end date for the recurring event. The end date for all recurring events seemed to have changed to one day later in my iCal calendar but not on mobile me, therefore causing the conflict. Anyway iCal continued to crash about 5-10 secs after opening every single time.
    I tried verifying and repairing permissions with no success.
    I tried deleting a bunch of .plist files which I had read about in other forums with no success.
    I tried a reinstall of the OS keeping settings and preferences with no success.
    I tried a complete erase and reinstall this morning. After downloading and reinstalling all updates I opened iCal and it seemed to work fine.
    I then signed in to mobile me and started syncing. Contacts and safari bookmarks synced just fine. I then synced calendars and opened iCal. Exactly the same crash problem occurred. This has got me thinking that there is some sort of corruption in my calendars stored in mobile me.
    My iphone is synced to the same calendars in mobile me and has no issues. I considered syncing my phone to my macbook via USB, and then replacing the data in mobile me with that on my mac, but to do this I need to disable sync between my phone and mobile me. When I go to do this the phone tells me it is going to delete all calendars on the phone.
    I would dearly love to find a solution to this problem if anyone can help.

  • [Solved] Screen freezes few seconds after logging in.

    Hey there.
    I'm looking for some guidance if possible.
    I installed Arch in an external hard drive to test out the compatibility with my laptop (a LG P1-J331P > http://pastie.org/8548089 ) with an ATI Mobility Radeon X1400 video card. All following the beginner's guide [https://wiki.archlinux.org/index.php/Beginners%27_Guide] and relevant wiki for the external/usb device installation [https://wiki.archlinux.org/index.php/Usb_installation].
    Running arch with "nomodeset" on kernel parameter, it runs normally, except that the screen resolution was fixed at [email protected], though it should be maxed at 1280x800@60.
    When "nomodeset" is set:
    $dmesg | grep radeon
    [ 10.859500] [drm] VGACON disable radeon kernel modesetting.
    [ 10.859507] [drm:radeon_init] *ERROR* No UMS support in radeon module!
    Without using "nomodeset", the system detects correctly the screen resolution but it freezes few seconds later after logging. Can't Ctrl+Alt+F1.
    Tried:
    - added "radeon" to MODULES array in the mkinitcpio file. And run the subsequent "mkinitcpio -p linux";
    - created a "/etc/rc.d/rc.local" file with contents:
    modprobe -r radeon
    modprobe -r drm
    modprobe radeon modeset=1
    - tested "radeon.pcie_gen2=0", "pci=nomsi", "noapic" and "acpi=off" to the kernel parameter.
    - created a "/etc/X11/xorg.conf.d/10-monitor.conf" file with contents: http://pastie.org/private/bhcbfvs3zvplvspwamxa2q
    Video card drivers installed: mesa, xf86-video-vesa and xf86-video-ati.
    lsmod > http://pastie.org/private/orfrp0qg8kijqwuvrrxqag
    uname -r > http://pastie.org/private/u89igykam0slvnv2ffhhpq
    lspci | grep VGA >
    dmesg | grep radeon >
    journalctl --since=today >
    cat /var/log/Xorg.0.log > http://pastie.org/private/thgrsplegancpggsfsbjlw
    top -b > http://codepad.org/iojWRb9U
    Any advice for this newbie would be appreciated.
    Last edited by T-Cypher (2014-03-11 16:00:55)

    - Tried creating a "/etc/X11/xorg.conf.d/20-radeon.conf" file with contents:
    Section "Device"
    Identifier "ATI Mobility Radeon X1400"
    Driver "radeon"
    Option "SWcursor" "off" #software cursor might be necessary on some rare occasions, hence set off by default
    Option "EnablePageFlip" "on" #supported on all R/RV/RS4xx and older hardware, and set on by default
    Option "AccelMethod" "EXA" #valid options are XAA, EXA and Glamor. EXA is the default
    Option "RenderAccel" "on" #enabled by default on all radeon hardware
    Option "ColorTiling" "on" #enabled by default on RV300 and later radeon cards
    Option "EXAVSync" "off" #default is off, otherwise on. Only works if EXA activated
    Option "EXAPixmaps" "on" #when on icreases 2D performance, but may also cause artifacts on some old cards. Only works if EXA activated
    Option "AccelDFS" "on" #default is off, read the radeon manpage for more information
    EndSection
        And the subsequent Xorg.0.log > http://pastie.org/private/goyhnu9bzxhzybl4sisaa
        With this file and using "nomodeset", the boot would be stuck at :
    [ OK ] Reached target Graphical Interface.
        But without "nomodeset" parameter, it would successfully launch the graphical login but still freezes a few seconds after logging in.
    xdpyinfo | grep -B2 resolution
    screen #0:
    dimensions: 1280x800 pixels (338x211 millimeters)
    resolution: 96x96 dots per inch

  • Gaming apps freezes for few seconds , then resumes by itself or crashes sometimes ,after upgrading to iOS 8.3 on iphone 6

    Gaming apps freezes for few seconds , then resumes by itself or crashes sometimes ,after upgrading to iOS 8.3 on iphone 6

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • Just installed windows 7 Ultimate using Boot Camp. Problem is when I chose to boot the windows partition, I get the windows icon on the sreen showing that it is starting, but few second after I get a black screen

    Just installed windows 7 Ultimate using Boot Camp. Problem is when I choose to boot the windows partition, I get the windows icon on the screen showing that it is starting, but few second after, I get a blank screen. I suspect a driver (screen) issue, since I also installed Parallell using the boot camp partition and that works fine.
    Do anybody out there has an ideal of what to do to solve this issue.
    Thanks
    Pierre317

    Hi Pierre,
    more tips can be found here ...

  • I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.

    I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.

    I don't know which country you're in, but in the US, carriers limit the amount of download for a single file when using 3G.  Have you tried wifi?

  • IMac freezes every few seconds. Dock won't appear. Other wierd glitches. Getting worse every day. ***?

    iMac freezes every few seconds. Dock won't appear. Other wierd glitches. Getting worse every day. ***?

    Hello
    Check out the troubleshooting articles below to resolve issues with your Mac freezing on you. You may need to resintall Mac OS X Lion.
    OS X Lion: If your Mac runs slowly
    http://support.apple.com/kb/PH3915
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    OS X Lion: Reinstall Mac OS X
    http://support.apple.com/kb/PH3878
    Regards,
    -Norm G.

  • HT2486 the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they a very small portion of the actual photo

    the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they are very small portion of the actual photo

    Frank, thanks for your note.  I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it.  Too much to ask?
    And yes, I upgraded the Aperture 2 Library first.  [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.]  That step took a number of minutes, but seemed to work fine (no error messages of any kind).
    Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so.  As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely.  You did see the blurry example I included, didn't you? That is what each and every photo looks like.
    Text-box content appears to have been rendered pertectly, for the record (including captions).
    So, ... is this result something you have heard of before?  Do you know of a one-step solution?  Or am I looking at an extended picture-by-picture fix?

  • My computer logs me off a few seconds after i log on. How do i fix it?, my computer logs me off a few seconds after i log on. How do i fix it?

    my computer logs me off a few seconds after i log on. How do i fix it?

    Thanks Linc, for the response. I did try rebooting in safe mode and it still blew up, then I logged in remotely and saw the above in the crash logs so I tried deleting one of the dock's config files, since that seemed to fix a similar issue for someone else. But that did not fix my problem, either. That's when I tried reinstalling the OS over the old install, which also did not fix the problem. 
    But wonders of wonders, it is now working! I can't say for sure why, but it seems to have automagically cured itself. Or, maybe not so automagically. I did install an OS X update just before I was able to successfully log in, so maybe that's what fixed it.
    So, I still don't know what caused it; I'm not sure what fixed it, but the experience convinced me to get a network drive and set up TimeMachine.

  • My flash player continues to buffer every few seconds after it starts

    My flash player continues to buffer every few seconds after it starts, it plays then buffers, plays then buffers. It worked just fine up until a few months ago. I’m not sure what changed. I am running windows vista. I checked the add-ons and the flash player is enabled. I tried turning off the popup blocker. I just downloaded the latest version and no change.
    Please help Thank you!

    This is the run without permision list. I wish I knew how to get rid of some of this stuff . Just talked to a friend of mine that has the same problem. I also just ran a speed test on youtube and it shows that streaming HTTP is running at an average of less than 100 kbps.
    Microsoft Office Template and Media ControlVersion   12.0.6211.0 QuickTime ObjectVersion  QuickTime 7.5 (861)/ STSUpld UploadCtl ClassVersion  12.0.4518.1014 /InformationCardSigninHelper Class  Version   8.00.6001.18702 /XML DOM DocumentVersion  8.100.4001.0 /XSL Template Version       8.100.4001.0 /HtmlDlgSafeHelper Class Version  8.00.6001.18702 /Tabular Data Control Version       8.00.6001.18702 /XML Schema Cache Version 8.100.4001.0/ SharePoint Spreadsheet Launcher Version       12.0.6211.1000 /QuickTime Object Version   QuickTime 7.5 (861)/ SharePoint Export Database Launcher Version   12.0.6211.1000 /Microsoft Shell UI Helper Version   8.00.6001.18702/ Microsoft Office List 12.0 Version  /   12.0.6211.1000 Windows Media Player Version   11.0.6001.7008/ Windows Media Services DRM Storage object Version   11.0.6001.7000 /XML DOM Document 4.0 Version   /  4.20.9876.0 Free Threaded XML DOM Document 4.0 Version  4.20.9876.0 /XML Schema Cache 4.0 Version 4.20.9876.0 /XSL Template 4.0 Version   4.20.9876.0 /XML Data Source Object 4.0 Version   4.20.9876.0/ XML HTTP 4.0 Version   4.20.9876.0/ XML DOM Document 6.0 Version  6.20.4001.0 /Free Threaded XML DOM Document 6.0 Version 6.20.4001.0 /XML Schema Cache 6.0 Version  6.20.4001.0 /XSL Template 6.0 Version   6.20.4001.0 / XML HTTP 6.0 Version  6.20.4001.0/ Java Plug-in 1.6.0 Version  1.6.0.0 /Registration Control Version   6.0.6001.18000/ SharePoint OpenDocuments Class Version       12.0.6211.1000 /SharePoint OpenDocuments Class Version  12.0.6211.1000/ RMGetLicense Class Version   11.0.6001.7000 / OWSClientEventSubscription Class Version 12.0.6211.1000/ OWSClientMiscApis Class Version   12.0.6211.1000 /OWSClientCommentThread Class Version       12.0.6211.1000/ OWSClientComment Class Version  12.0.6211.1000 /OWSBrowserUI Class  Version       12.0.6211.1000 /  Discuss /OWS Post Data Version 12.0.6211.1000/ SharePoint Spreadsheet Launcher Version  12.0.6211.1000/ Web Discussions Version  12.0.6211.1000 /Web Discussions Version       12.0.6211.1000 /Web Discussions Version 12.0.6211.1000 / OWSDiscussionServers Class Version       12.0.6211.1000 / OWSClientCollaboration Class Version  12.0.6211.1000 /OSE.Discussion  Version       12.0.6211.1000 / OSE.Discussions  Version  12.0.6211.1000 /OSE.DiscussionServer Version       12.0.6211.1000 / OSE.DiscussionServers Version  12.0.6211.1000/ OSE Global Class Version       12.0.6211.1000/ OWSDiscussionBar Class  Version  12.0.6211.1000/ SharePoint OpenDocuments Class Version  12.0.6211.1000 /SharePoint Stssync Handler Version 12.0.6211.1000 /SharePoint Stssync Handler Version  12.0.6211.1000 /Microsoft Office 12 Authorization Control Version 12.0.4518.1014 / Java Plug-in 1.6.0 Version  1.6.0.0/ Java Plug-in 1.6.0/ Version   6.0.0.104/Java Plug-in 1.6.0 /Version       6.0.0.104 /Behavior Object Version   / QuickTime 7.5 (861) /STSUpld CopyCtl Class Version       12.0.4518.1014/ iTunesDetector Class Version  2. 0. 0. 1/ OISClientLauncher Class Version       12.0.4518.1014 /PersonalSite Class Version  12.0.6212.1000 /Scripting.Dictionary Version  5.7.0.6000 /XML DOM Document 3.0 Version   8.100.4001.0 /Free Threaded XML DOM Document 3.0 Version       8.100.4001.0 /XML Schema Cache 3.0 Version 8.100.4001.0 /XML HTTP 3.0 Version   8.100.4001.0 / XSL Template 3.0 Version    8.100.4001.0 /XML Data Source Object 3.0 Version  8.100.4001.0/ Free Threaded XML DOM Document Version  8.100.4001.0 /XML Data Source Object Version   8.100.4001.0 /Google Update Plugin Version 1.2.183.23/ SSVHelper Class Version  6.0.0.104

  • IChat contact disappears a few seconds after adding

    iChat contact disappears a few seconds after adding. For some reason it only happens with this one person.

    Hi,
    First of all go to the iChat Menu bar > View Menu and make sure you are showing Off Line Buddies ?
    Do they appear as Off Line ?
    Next go to iChat > Preferences > Accounts > Security tab and make sure they are not in the Block List (Or are In the Allow Specific People if you are using it) Preferably test with Allow All.
    Make sure you are not trying to add them to the Recent Buddies Group as this is not really on you computer.
    Lastly get them to email the Screen Name to you.
    This will allow you to check the Spelling.
    NOTE: if missplelt or blocked in some way they should appear in the Off Line Buddies.
    One other option is that you are adding then as a @Mac.com name when they are in fact an AIM name (or any name variant of this)
    For Instance
    ralphjohnsr
    [email protected]
    and [email protected] are in fact three different Screen Names (or possibly people)
    11:53 PM Monday; August 3, 2009

  • My ipad2 keeps crashing a few seconds after it is switched on ?

    Can somebody PLEASE tell me how to fix this problem...
    My ipad 2 keeps crashing a few seconds after it is switched on....
    this happened after i downloaded and installed the latest IOS 7.0.4 from APPLE
    what is going on ??
    I read that quite a few people have experienced the same problem....
    Is there a cure ?? If so how ???
    Many Thanks

    Is it possible the battery is getting low? Try this procedure.
    Plug your iPad into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

Maybe you are looking for