Blackberry 9900 will not connect with Blackberry Desktop (v 6 or v7). I am running Windows 7.

I am running Windows 7, and have a Blackberry Bold 9900.  This has some music on but most importantly my work diary and contacts which I synchronise through Desktop.  I also use it as an external modem and tether my PC through it if I’m somewhere with no wireless.
Yesterday, I did these things during the afternoon:
·         Connected a Bluetooth device to my PC (headphones)
·         Needed to load a series of drivers for Windows for this to work
·         Upgraded from Blackberry Desktop 6 to 7 (following prompt when connected)
·         Set up a Bluetooth connection between my Blackberry and PC.
The next time I connected:
·         On The Blackberry smartphone I got the normal Blackberry is plugged in message, with normal options (USB Drive / Sync Media / Charge Only), and software opened as usual
·         But I was prompted to Connect Your Blackberry Device (with link to troubleshoot connection).  Clicking this, I was taken to a page which suggested I check the cable etc. (which I did, all OK) and “...turn off synchronization applications or antivirus applications temporarily”.  I disabled Avast, which made no difference, and I don’t know what a “synchronization application” is
·         Other aspects of the connection are working (i.e. I can still download photographs from the Blackberry, and still see it as the ‘F:’ drive)
I therefore conclude that:
·         Cable / physical connection is good (also tried a different cable - no change)
·         Something I had changed had corrupted things, so:
·         Uninstalled Blackberry Desktop v7 and replaced with the version I had been using successfully until yesterday (v6)
·         Removed the Bluetooth connection to my Blackberry.
Made no difference, so checked Blackberry help forums, which confused me more.  One thing which I did discover, was that in Device Manager, although Blackberry is visible attached to PC (and says it is working correctly), it DOES NOT appear in the list of Network Adapters (I don’t know if it did before, but one answer in the tech forum suggested this is significant – though not sure why or what to do about it)
Any help would be very welcome – been at this for ten hours now and making no progress!
Many thanks
Clive

This worked for me after several hours on the phone with Blackberry Support.  I hope it works for you too:
Finally got it working again! Re-downloaded the desktop software (but when you start it up, make sure to uncheck the automatic update option). While that was downloading, I was instructed to go to microsoft.com and search for and download .NET Framework 3.5. Once you click to download that, there will be an offer to download 2 other items. One of which will be Microsoft .NET Framework 4 Client Profile (Web Installer). Click to download that too. Once they are finished downloading, run both files. .Net Framework 4 Client Profile will take longer and will ask you if you want to repair or remove. Choose repair. The repair took several minutes, but once it was done, I clicked "Finish", opened the BB Desktop Software, UNCHECKED THE AUTO UPDATE OPTION, and plugged in my phone. Once windows finished installing the drivers, Low and behold! The Desktop software recognized that the phone was connected! I hope this helps you resolve your issue as well. When it again offered me an update I clicked to update later (meaning never!). Best of luck to you.

Similar Messages

  • My 8320 curve will not connect with the desktop manager

    I have just received a new device (bold 9700), and i need to send my contacts from my old 8320 to the 9700. 
    I read a post about doing it thru the desktop manager, but i have never been able to sync my 8320 to the desktop manager. 
    How can i make the desktop manager recognize my bb 8320?
    thanks

    You should be able to use the switch device wizard in BB Desktop Manager.  Are you wanting to "sync" or are you wanting to make a backup or transfer info from one BB to another?  They are two different things.  Can you be more specific?  When you plug in the device does DM show the pin at the bottom of the DM screen (or the device picture if using DM6?)
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • My iPhone 4s will not connect with my home WiFi network. I have ios6 on my phone. I have updated my IMac and my MacBook Pro with iOS 10.8.2. Anyone have any suggestions? It was connecting with no problems prior to updating my two computers.

    My iPhone 4s will not connect with my home WiFi network. I have ios6 on my iPhone. The connection was working perfectly before I updated my IMac and my MacBook Pro to ios 10.8.2. I have had ios6 since I purchased the phone a couple of months ago. It searches for a network and finds them, but when it asks for my password, it will not accept the password. Have never had this happen before.

    Hello krosebear,
    Thank you for using Apple Support Communities. 
    If you are having difficulties connecting your iPhone to a Wi-Fi network, the following article should provide troubleshooting that should help you resolve the issue. 
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
    Regards,
    Jeff D. 

  • My itunes on a windows 7 pc with dsl connection will not connect with the itunes store

    my itunes on a windows 7 pc with dsl connection will not connect with the itunes store.  Any suggestions about why not or how to get it to connect?

    After reading the whole post, I still don't capture the exact error message or code from it when you failed to install Office 2013. 
    The only clue is that "bootstrap loader error" ...
    It seems that you want to upgrade Office 2007 to new Office 2013, by default, we could complete the uninstall previous Office version and install the new Office in the installation wizard.
    At this point, if you get the install source through CD or other media. I recommand that we copy/paste the installation to local drive. Then turn off all of anti-virus and firewall, begin to setup in
    Windows clean boot mode.
    Please use a setup log to troubleshoot setup problems in Office if the installation problem still occurs.
    http://support.microsoft.com/kb/826511/en-us
    Tony Chen
    TechNet Community Support

  • My phone will not connect with my itunes so that I can sync them.

    My phone will not connect with my itunes so that I can sync them and update my music on my phone. How can I fix this?
    I have tried everything I know and could find to do.

    Hi kkmk2511,
    If you are having issues with your iPhone not being recognized in iTunes on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • My Contacts app for macbook pro will not connect with my yahoo and keeps asking for password.

    My Contacts app for macbook pro will not connect with my yahoo account and repeatedly asks for yahoo password, any soliutions to this?

    This is due to a change in Yahoo's security settings. You need to go into your Yahoo account settings and create a special App Password, then use that password in Contacts to access your account. Same goes for Calendar.

  • Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    Since upgrading, both our wireless printers are still visible, but OSX will not connect with them.  Both work via connecting from other sources via the same wireless router (airport).  What do I need to do to get my printing/scanning working again?

    First thing to try is reset Printing System:
    OS X Mavericks: Reset the printing system
    Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

  • Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

    Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

    Do the usual wireless things.
    Change the wireless name to simple name with only alphanumerics and no spaces.
    Set to manual and use channels 1, 6, 11 in turn.
    For testing take off the security altogether.
    The iphone only works on 2.4ghz so only that band is relevant.

  • HT201412 phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

    phone will not connect with iTunes, so you can not run, and I unlocked it and got the message that it is unlocked and I have to connect with the tunes.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My new iphone 5 will not connect with the idrive on my new BMW F30 3 Series - any ideas?

    My new iphone 5 will not connect with the idrive on my new BMW 3 Series (F30) via the lightening USB - does anyone have any ideas?

    What have you done thus far to troubleshoot your issue?  Have you powered down and rebooted your router yet?

  • My Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "This Ipad cannot connect

    my Ipad will not connect with Itunes prompt states this Ipad cannot connect because the Apple mobile device service has not started "??s "

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • My iPhone will not connect with iTunes!

    Phone will not connect with iTunes, but will connect with the computer, which is window's 7...What do I do? I've done it before but I really can't remember how I did it!

    Did you already try these suggestions? iOS: Device not recognized in iTunes for Windows

  • My phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

    my phone will not connect with iTunes when plugged up to usb cord it will only charge on pc and mac

    If the device isn't be recognized by itunes, try following the troubleshooting steps in one of these articles
    http://support.apple.com/kb/TS1538 for windows
    http://support.apple.com/kb/TS1591 for mac

  • How to De-authorize an older PC running Windows 2000 with iTunes 7?  My itunes will not connect with the iTunes store to all the de-auth request.

    How to De-authorize an older PC running Windows 2000 PC with iTunes 7?  My itunes will not connect with the iTunes store to all the deauth request.

    The "Deauthorize All" command is only available if iTunes thinks you are currently using 5 authorizations. 
    Otherwise, you can only deauthorize the old computer by using "Deauthorize this computer" from the computer itself.
    If the old computer is no longer operable, you can't deauthorize it, but that is not a problem.

  • TS1368 I have tried uninstalling and re-installing and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
    I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
    Network connectivity:
         Network interfaces, verified
    iTunes Store connectivity:
         Internet connection, verified
         Secure link to iTunes Store, FAILED
    Does this help?

Maybe you are looking for

  • Bluetooth on iPhone does not find my iPad

    Bluetooth on my iPhone does not find iPad when both devices are next to each other.

  • Fpga FFT input data type

    I am using the FFT on a 9076 FPGA, in a single cycle loop, and I will be processing data from both a 9205 and a 9235. The 9205 FXP is 26,5, while the 9235 is 24,-4.  What is the best way to deal with this? I am not sure what will fit (I am finally co

  • How edit a combobox class for dropdown direction changing?

    hi all,      i wanna change the direction of combobox dropdown so How can i edit a combobox class for dropdown direction changing?

  • To get the last date of year

    Can anyone tell me how to get last date of the year while passing the First date of year: My below query is giving the last date of the month SELECT LAST_DAY(ADD_MONTHS(TO_DATE('01/01/2012','DD/MM/YYYY'),12 - TO_NUMBER(TO_CHAR(SYSDATE,'mm')))) FROM D

  • EHP Package

    Dear All, I am trying to install EHP1 package on SAP EHP 1 for SAP Solution Manager 7.0 . all the screen shots are in following url http://www.sendspace.com/file/yaa13t at last  the below error message is comming . when upNo OCS files were found for