Blackberry Accessibility, function and features

to enhance accessibility within the Adobe Reader App, shortcut key definitions for the previous and Next page buttons or Icons would be highly beneficial for scrolling through the document by those using the blackberry Screen reader.

It's strange, I can't imagine your phone doesn't have such a function. The only thing I can suggest is to install some official firmware to your phone or to find someone who can do it for you. Just to inform you, I have 10.2.1.2941 firmware, phone type sqn100-3. Maybe your phone is of another type. Sqn100-3 means the phone is for Russian communication standarts, but it hardly has anything to do with built-in functions like screen-reader. Here is a link to site with firmware http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using... (latest firmware on your phone For Q10 models SQN100-1, -2, -3, -4, -5 (all): Download 10.2.1.3253) , but there're many sites like this in the internet. Remember to do any changes to firmware at your own risk. Maybe it's better to contact some local experts in your area. I hope it will help you

Similar Messages

Blackberry Accessibility, functions and features

An accessibility enhancement which would benefit both the Blackberry Screen Reader user and even the sighted, would be the incorporation of VCR type controls integrated with the Trackpad providing cursor type navigation control for left, right, up and down movements. This enhancement would also be highly beneficial to anyone who has a physical disability causing motor control issues.

I do PowerPoint presentations very often... it is a pain to bring a pointer, and have the pointer work at every business meeting. it would be grand to have a pointer bulit-in with smart phone.

Blackberry Assistant, function and features

When using the blackberry Assistant to dictate a E-mail or message, is it possible to insert a line break?
Also is it possible to control or adjust the punctuation being inserted/use? For example, when you say double quote the assistant inserts the HTML #quote; tag verses simply the " symbol.
Also, is there a reference document of the possible Assistant commands that can be used? Its impossible to click or tap on the info "?" icon when you can't see it.

Go to Options > Advanced Options > Application and delete the Blackberry Messenger.
Then open your BB broswer > Go to www.blackberry.com/messenger
If someone give you helpful hints, please click on Kudos.
If you issue is resolved, mark Accept Solution next to the resolution post.
Feel free to search www.blackberry.com/btsc to find your answers.

Which functions and features in Numbers are NOT exported correctly to Excel?

I wish to know EXACTLY which functions I use in a Numbers sheet WILL FAIL to export correctly to an Excel or Neoffice spreadsheet.
For instance, I created a Numbers spreadsheet using prolific use of the IFERROR function. However, when I EXPORT to XLS, all the cells that used the IFERROR function were replaced by the literal value of the cell. My IFERROR formulae were not EXPORTED as I had expected.
I note that some formulae were converted correctly in my EXPORTED spreadsheet: eg MAX, MIN, AVERAGE.
I understand that IFERROR was a function introduced recently to Excel, ie in the 2007 version. Consequently, I suspect that Numbers exports to a pre-2007 version of Excel. If so, which version?
I have found this list that shows which functions are compatable amongst various versions of Excel:
Excel Functions: Compatibility Reference (2010, 2007 & 2003). (n.d.). Retrieved from https://docs.google.com/spreadsheet/ccc?key=0AsHau4_IeCfwdG45c0VhcjBBUGNreVo2ZzN NRU1BT0E#gid=0
This list shows that, for instance, IFERROR exisits inb both Excel 2007 and Numbers-09. So why is IFERROR not exported?
Curmi, J. (n.d.). Summary of function in excel and numbers-09. Retrieved from http://curmi.com/blog/wp-content/uploads/2009/01/functions-in-excel-and-numbers- 09.pdf
Some examples of my use of ISERROR in Numbers are as follows:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
I use the above function to carry out the calculation ONLY IF a cell is non-blank and contains a number.
More questions
What are the rules that Numbers uses to convert to Excel?
Is Numbers converting to the 2003 version of Excel? ... or an earlier version? ... which version?
Why desn't Numbers advise me there were conversion errors or simplifications made?
eg: "Cell A33 Function IFERROR was exported to the cell value for Excel"
Is there a preference that I can select which version of Excel that Numbers will export to?
In the meantime, I must abandon Numbers and use NeoOffice!

Thanks,
I applied your suggested ISERROR transformation to examples such as:
=IFERROR(RANK(C47,$C47:$J47,1),"")
=IFERROR(MEDIAN(C51:C58),"")
=IFERROR($C32-C88+1,"")
However, a caution for young players....
Certainly, the ISERROR function exports to .xls. However, it behaves differently in NeoOffice.
Items 1 and 2 function identically in the case of say, ranking a row in which some cells are blanks.
Item 3, when translated using ISERROR to =IF(ISERROR(C32-C88+1),"", C32-C88+1), results in "" (ie error is raised) in Numbers but yields figure 0 in NeoOffice when there is a blank in either of the cells.
I recall from programming school in the mid-1970s that using GOTO statements and On Error branch statements were not admissible as routine programming steps. In fact, we received an automatic fail grade if we used a GOTO or GOTO like construction. So, I have found a more programmatically elegant way to solve my problem: eg:
=IF(C88="","",C32-C88+1)
Curiously, earlier I found/suspect this does not work equivalently in Numbers and NeoOffice:
=IF(ISBLANK(C88),"",C32-C88+1)
When you try using ISBLANK you always get an intuitively unexpected result because ISBLANK ONLY gives TRUE when there is absolutely nothing in a cell. A Formula reference in the cell, even if the function result yields "", gives FALSE... because, according to the definition of ISBLANK the cell contains a formula.
As I tell my students, ALWAYS lookup the HELP on any function you use. ALWAYS test the function to see how it performs!.... and lesson 3: Always test your spreadsheet on different systems.... then hope!
FYI:
Here's a link to my Spreadsheet (Neoffice .xls) and a video explaining its use.
Team Contribution: Introduction (Prototype). (2013). Retrieved from http://www.youtube.com/watch?v=bj87FGLoplk&feature=youtube_gdata_player
I don't guaranteee this link for ever! ... and I continue to "tweak" it
https://www.dropbox.com/s/1jz7gzksejnbqo1/Team%20Contribution.xls

ITunes has slowed...every function and feature...

I am having a real problem with iTunes that seems to have started when I installed the iLife 08 package and following the most recent iTunes update. I have searched the forums and support and can't find a clue. All functions appear to be slowed to a frustrating crawl. I feel like I am back to my old Mac Plus...nothing cooks like it did.
It takes 8 seconds to drop any menu and 18 to 45 seconds to quit. Selecting any title on any list is activated 10 seconds or more after the mouse clik. Dragging to the iPod is so slow that I can't tell when I have accomplished it. Every operation has slowed down by what seems to be 80 or 90%
All the problems are on the G5Tower and the MacBook is unaffected.
I have seen so much of the spinning rainbow I thing my color blindness has been cured. I am going nuts...please help.

I'd say go to Activity Monitor and see what processes are in effect and see what's bogging down the CPU, From there you can kill any app that's hanging or depleting CPU resources. If all checks out well, Then a clean install of the OS is the next step.

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Planning function and planning sequence of Design studio new features!!

Hi Experts
Recently I have updated my design studio to 1.3 and happy to see many new updates. Meanwhile i saw some new features add planning function and planning sequence.
As per my understanding, Using this features we can enter data at run time. My query is here
Is it like we are entering data at run time and see the changes in current data(chart series)
Ex: Add discount for product 10% and relevant data(in chart) reduced to 10%
or
Is it like integrated planning? Once we enter data in run time and it saves in BW planning cube?
I am totally confused with this feature.. Can any one help me to get clear understanding on this please !
Regards,
Mathivanan M

Hi,
maybe these two article can help you:
#1 Planning in Design Studio 1.3
#2 Planning in DS 1.3 - Using different script methods for planning
As i unterstand, it's only possible to write back in BW.
Best Regards
Sebastian

Hi, My handset seems to have lost the Blackberry Messenger function and I have tried to install it again ....

Hi,
My handset seems to have lost the Blackberry Messenger function and I have tried to install it again however the handset keeps telling me it has the incorrct software???
Please could it be reinstalled over the balckberry network???
Message Edited by Beholder on 06-12-2009 09:16 AM

Go to Options > Advanced Options > Application and delete the Blackberry Messenger.
Then open your BB broswer > Go to www.blackberry.com/messenger
If someone give you helpful hints, please click on Kudos.
If you issue is resolved, mark Accept Solution next to the resolution post.
Feel free to search www.blackberry.com/btsc to find your answers.

Blackberry Does not Function, Plugged into USB red light then 3 yellow lights and off

Blackberry Does not Function, Plugged into USB red light then 3 yellow lights and off, I cannot even claim the warrently without buying 50$ support?
I am an Electrical Engineer by trade and have 15+ years working with computers. I left it to charge over the last 3 days. Doesn't do anything. It's a $300 paper weight. My mother bought this product for me because she thought it was a great present but now it turns out to being worthless.
What kind of company are you? Honestly?
How the hell do you think your gonna get customer loyalty with this kind of customer service. It's clearly obvious why apple is destroying you. You are worthless competition. I want this blackberry fixed. I will NOT pay for support just to replace my blackberry. That is crooked business honestly. You should be ashamed of yourselves.
My mom bought this for my birthday 4 months ago. I open it up and it doesn't even work. How can you do this to your customers. It's no wonder your company is going out of business.
I demand you fix my issue. I have 1 year of warranty support. I will NOT pay extra just to get my Blackberry exchanged.
Wait until I inform all my news groups in my area of this. I am from ONTARIO, BRAMPTON. I am a CANADIAN, just like your company. CP24 WILL HEAR ABOUT THIS. I WILL RUIN YOUR REPUTATION. I PROMISE YOU THAT.
Solved!
Go to Solution.

No sarcasm here either.
One of my PlayBooks recently went 'possum on me, too. Very frustrated, tried all the known tricks and tips to charge and revive it. Over a year old. I called the support line knowing it was out of date and they would deny me.
Nope, the lady very pleasantly accepted my request, I spoke with customer support and they bugged me via email daily until we got it resolved -- to MY satisfaction. My first interaction with PlayBook support, and it could not have gone more nicely nor further beyond my expectation.
I don't know what you experienced with PlayBook support, you didn't say why you're so mad with them. This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here. You would have noticed this in the EULA and message upon registration.
Sooo... good luck, and just for the record... the LED activity you described IS very fixable. Sorry you don't have the choice to explore those remedies any longer.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

BUGS and FEATURES REQUESTED. Please add to it.

I've been using the z10 for the past couple weeks and wanted to start a thread of comprehensive Bugs and Features Requested.
I've labeled Bugs by letters (A,B,C...) and Features Requested by numbers (1, 2, 3...) so that others can add sequentially.
BUGS
(Not listed in any particular order)
(A.) Contact App adds current date as birthday. When I edit my contact, the current date gets listed as the birthday in local contact.
(B.) Duplicate telephone numbers listed. Telephone numbers show up twice in my Contacts (e.g.., if I have the contact's cell saved in (000) 123-4567 format and the person has the number listed in Facebook, I get a duplicate entry of +10001234567).
(C.) Telephone numbers and emails are not actionable in Web pages. In webpages, I can't click on telephone number to call (e.g., I look up a phone number for a restaurant). I should be able to easily call or copy into the Phone App or E-mail App.
(D.) Auto capitulation for words on the word substitution list is wrong. For example, when the word substitution contains more than one word. I have "ru" change to "are you" but if the first letter is capitalized (R) then both words become capitalized words (Are You). I used to have shortcuts like "mysig" to create email signatures with legal disclaimers but I can't do that now.
(E.) Backspace delete doesn't work consistently. The Shift+Delete function seems only to work after moving the cursor. This feature is the Alt+Del action to delete words after the cursor.
(F.) All Emoticons do not list. Emoticons do not all fit on the the two screens (lists) of emoticons. I.e., two columns are missing from view and can be seen when sliding (swiping) between the lists. Also, sometimes when I select an emoticon, it doesn't correspond with the picture of the one I intended. I believe this error is related. As a separate note, there should be a way to see the underlying symbols of the emoticon. (Often times, other people don't have BlackBerrys so I'd like to know what symbols would be sent--my prior 9800 would show the characters as i scrolled through them).
(G.) BlackBerry keyboard doesn't always work in input fields. E.g., certain Web pages. (I found a work around; two finger swipe up from the bottom makes the keyboard appear)
(H.) Sent messages stay unread. This seems to be an issue when an app sends an email (e.g., share article). The email with the sent indicator (checkmark) stays bold and I have listed 1 unread email. I can't mark as read/unread but if I delete the sent email, my unread message gets cleared.
(I.) Contact already added but I get the option to add instead of view contact. For some contacts, I get the option to add to contacts in the action menu cascade when that person is already in my address book. This bug is for emails and text messages.
(J.) Cannot call from text message. When I hold a text message and select call under the action menu cascade, the OS opens up the phone app but doesn't call.
(K.) Composing messages by name. When composting messages, the input must be by first, middle and last name. It should be, instead, by string and include nickname. E.g., if the person's name is "Andrew B. Cameron" I must type the name in as such. I can't type in "Andrew Cameron" or "Andy Cameron."
Features Requested and Suggestions for Improved User Experience
(In no particular order)
1)      Option to reply in different ways from the Call List. Be able to select a name in a call list and have options to call, text or email the person. The action menu allows calls to other numbers but I can't choose to text or email the contact instead. Sometimes, I missed a call and want to reply via text because I’m not able to talk. (Long hold on the Torch 9800 trackpad button brought up the action menu allowing me to call, text, view history, add to speed dial, e-mail, delete, etc.)
2)      Option to reply in different ways from the Hub. Related to above, when selecting an item in the hub, have the option to contact the sender or caller with multiple different ways.
3)      Only show number once in contacts application. Tap on the number to bring up the "action" cascade menu with options to call or text the number. Why is the same number listed twice (once to call and below again to text it)?
4)      Timestamps for individual text messages. I can't tell exact time on individual text message if it comes in near the time of another text. All messages are in one "bubble."
5)      Ability to select MMS or text for a message. Sometimes I write a text longer than 160 characters and I prefer it to be sent in one message (i.e., MMS mode) rather than being broken into one or more standard text messages. I had this ability with my 9800.
6)      Send button should be moved for text messages!!! Why the heck is it right underneath the delete button?!? Or next to the period button? I often times have accidentally hit send when composing text. It's very annoying and embarrassing. (Also, what happened to the ability to hit enter for a return carriage to next line?)
7)      Bigger magnifying glass. My finger is often over the area I need to place the cursor. I find it difficult and erratic to place the cursor.
8)      Select all option. Add the option to select all text in action menu cascade.
9)      E-mail recipients and message headers. Difficult to tell if you are one of many email recipients. Can we have a way to pull the email down to see the list of recipients rather than have to click to expand the header info? I know this request is a little picky, but that's how it was done in the previous BlackBerry OS which I preferred; it is easier and faster to pull the e-mail down and 'peek' to see which e-mail box received the message, message status, from and to fields. This change would be consistent with BB's flow/peek rather than click.
10)   Browser navigation. Hold down back arrow to get a list of recently visited websites similar to a desktop browser.
11)   Dark/Night mode. A night mode (maybe in the drop down menu) to change all the white and bright backgrounds to black or dark which would be helpful when reading/viewing things at night in bed/etc.
12)   Number of contacts. Ability to see how many contacts I have.
13)   What happened to groups or categories? I'd like to have back the ability to filter or see categories and also a way to contact everyone in a category. E.g., family or friends or coworkers, etc.
14)   Shutter sound mute. I was at a wedding and wanted to take pictures during the ceremony but the shutter would was too loud.
15)   East Asian Language Input. I bought my parents two Samsung Galaxy S3 phones over the weekend because they need Korean input (and the Kakao talk app). (BTW, S3 is a great phone but I prefer the Z10 after having the weekend to use the Android phones).
16)   Ability to freely place icons on the homesreen. Currently, icons are forced top left-right-to-bottom. I prefer to space my icons out.
17)   Add a contact to the homescreen. I'd like to place a shortcut (similar to a Webpage) to the homescreen for a contact which will open up the contact. Android allows this feature and so did my previous 9800.
18)   Search Contacts by nickname. The contacts app doesn't allow me to search by, e.g., Andy, even if I have that as my contact's nickname. The previous OS allowed this type of search which was very helpful.
Finally, as a note, I've been using the BlackBerry Z10 for the past 2 weeks and it's a great platform. I just bought two Samsung Galaxy S3 phones over the weekend for my parents so they could use the Korean language input and related features so I spent a lot of time with the Android platform, setting it up and teaching them how to use it. The S3 is a great phone too.
I prefer, however, the way BlackBerry has done their OS 10 and the integrated management of messages.
It's too bad that BB doesn't have Korean input and apps like Kakao Talk or I would have considered it for them.
The BlackBerry 10 is a great platform and I look forward to the continual improvements that will only make the experience better.

This is a great post.
I couldn't have written it myself better.
I'm also in dying need of Korean input as I can't communicate with my Korean friends.
But I second every point.
I hope the tech teams are reading this.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

I would like to put Dreamweaver 8 on a new computer. There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this?

There is no "deactivate" function and the technical support person I chatted with recommended I come here. Can I just use the serial number again? How can I deactive? Has anyone else run into this? How can I get Dreamweaver 8, which is no longer being activated by Adobe, on a new computer? Is it even worth doing or do I need to get a new version. What are the killer features I'm missing?

If you manage to get it installed on your current OS, don't forget to install the 8.02 update.
Adobe - Dreamweaver Support Center : Updaters
Nancy O.

Numbers' Functions and Formulas in Multiple Cells, Tables, and Sheets

Hello,
I'm stuck with specifics that center around usage, and I get the funny feeling I'm overlooking a simple detail or two.
If I may, here goes.
I'm working with a single spreadsheet that has several sheets within it, and each sheet has an identical table. Each table is used to record various data, and I use an additional table in a separate sheet to consolidate some of the information, so that I can track results, at a glimpse, by looking at averages, totals, etc.
Each data table is organized for consolidation by tracking wins, ties, or losses. It is important to know that each data table only records a single win, tie, or loss along with its other applicable data. And on the actual consolidation table I am trying to tally specific data fields by the use of Numbers' functions and formulas, yet I wish to keep these tallied results organized by the determining factor of whether or not they were gathered from a table that recorded a win, a table that recorded a tie, or a table with a loss.
To illustrate, each table contains data fields that record start time, finish time, elapsed time, the day of the week, etc. Let's say I have eight tables, and the first two are winning tables, three more are tables that record a tie, and the last three are losing tables. For example, on my consolidated data table I wish to enter a function and formula capturing which of the eight tables are wins, ties, and losses so that I can, at a glance, see how much time elapsed to obtain the wins, ties, and losses. So then, in this example, for wins I want to determine which of those wins took 20 minutes, or which of them took 15 minutes, etc. So then, out of the two wins, let's say both of them took 20 minutes each. I need the numeral 2 to be counted and recorded on the consolidation table since only two tables match the criteria. And I would do the same for all remaining data fields (e.g., start time, finish time, etc.). Just so long as everything is determined by wins, ties, and losses, and then organized by the respective data fields. Simply put, this example determines a total of two wins that meet the data field requirement of 20 minutes. Out of the eight tables (one table per sheet) any other wins would then be organized according to the specific data in the elapsed time data field on it's data table (e.g., 5 minutes, 15 minutes, etc.).
The exact syntax structure of the functions and formula I'm unsuccessfully using follows below. It only seems to return a result of 1, and I think it is returning this value from the IF Statements. By the way, the Win, Tie, or Loss cell in each data table is cell formatted as a pop-up so I can either select None or 1. But in this example I'm basing this on the time period of 20 minutes, and out of the eight data tables I have two wins which also record the time period as 20 minutes, so I should see 2 and not 1 in the 20 minutes column of the consolidated data table. Also, I tried changing the syntax where I would type "=1" in the IF Statements, but it returned a result of =1, and if I don't include the equals sign and quotation marks the result just shows up as 1.
My Syntax:
IF(Trade 1::'Data Recorded (1)' '* Win', 1, IF(Trade 2::'Data Recorded (1)' '* Win',1, IF(Trade 3::'Data Recorded (1)' '* Win',1, IF(Trade 4::'Data Recorded (1)' '* Win',1, IF(Trade 5::'Data Recorded (1)' '* Win',1, IF(Trade 6::'Data Recorded (1)' '* Win',1, IF(Trade 7::'Data Recorded (1)' '* Win',1, IF(Trade 8::'Data Recorded (1)' '* Win',1, IF(COUNTIFS(Trade 1::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 2::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 3::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 4::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 5::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 6::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 7::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 8::'Data Recorded (1)' '* Time in Trade (in minutes)'))))))))))
Please bear in mind that the COUNTIFS portion of the above syntax structure is something I'm already successfully using to count the totals of other things not mentioned above, and I'm hesitant to delete it since it already works to my satisfaction when I want to, for example, determine the total number of overall wins. So, just for illustration purposes, I might have an overall wins column in my consolidation table that records how many wins there are, regardless of organization by elapsed time, or any other data field. In other words, the COUNTIFS syntax structure already works to my satisfaction. I'm not sure if it's possible to alter it so that it isn't so long, but what's there does work just when counting total numbers, as just mentioned.
In summary, I'm wondering which function I can use with the COUNTIFS function to determine which of my eight data tables are winning tables, but break those wins down further based on criteria like elapsed time, and in the above example the time elapsed is 20 minutes. As you may see above, I'm unsuccessfully using the IF function. Finally, I've looked at the function browser descriptions of things like LOOKUP, HLOOKUP, VLOOKUP, INTERSECT.RANGES, and a few others. And so far I haven't made good use of any of them the way I've done when I use the COUNTIFS function by itself when only counting overall totals. But now I must determine totals that meet certain criteria, as explained above.
Please help if you dare (smile). This is a huge project I'm undertaking, and so as not to cause confusion I have not included all of the details. But rather, I've taken a small sampling and set it to the side for experimentation. If this small sample works out to my satisfaction I can simply copy and paste the syntax in all other respective cells in the consolidation table, changing only reference locations, and perhaps conditions or values. One thing is certain, I don't intend on giving up on it.
Thank you for your time and advice.
Blessings!
Message was edited by: solo68
Added image.

I'd like to edit the last paragraph of my second posting, but for some reason an entirely new posting is being created when I attempt to do this. So when reading this post, please use it to replace only the last paragraph of my second post containing the four inserted images.
Last paragraph begins:
In closing, I need each cell in each column of each row in my consolidation table to remain as is. I have my reasons for doing this, and they all serve a specific purpose. The only exception would be the formatting of the last three rows as footer rows. Most importantly, and I should have made this abundantly clear earlier, my apologies, I need a single function and formula in cell E7 of my consolidation table that will firstly determine which data tables are winning tables while secondly and simultaneously counting which of those winning tables have elapsed times of 20 minutes. Perhaps, now this better explains why my syntax is written the way it is written. In the example I provided, if the proper function and formula were written it would result as 2 in cell E7 in my consolidation table. If there is anything else specific you need of me in order to assist me, please request it. Thank you.
Last paragraph ends:
Additionally, to t quinn:
First off, thank you for returning to assist me. I really do appreciate your efforts. Please be aware that I'm avoiding going into details about each and every portion of my spreadsheet because I wish to avoid discussion that is off topic. As I stated earlier, I'm new to using these features of Numbers. My spreadsheet encompasses a much larger amount of data than I'm referring to in the example in my first post. But in my example I'm isolating just the information concerning what I'm now trying to accomplish to finish my spreadsheet project. Moreover, most of what I've done up to this point I was able to figure out on my own, or get help from watching videos on YouTube, or simply using the application help menu. Please be aware that I consulted all of these, repeatedly. I even contacted AppleCare, and was told this sort of support is not available. In spite of this, I've accomplished a great deal in my first large spreadsheet project. Please be aware that when I wrote my second post and specifically responded to you, I didn't want to be rude or ungrateful, and I still don't, but maybe the suggestions you and Hiroto made about gathering the count of wins, ties, and losses are something I've already done. I think I've done that separately. These counts are already in separate cells, and they are working fine. In my first post where I inserted only one image you can see examples of this in my consolidation table image, in cells B3 and E6. I apologize for not making this abundantly clear earlier. Furthermore, the portion of my syntax that shows the COUNTIFS is the exact way I accomplished this, and it is written the way it is written because I need separate sheets, each with their own data tables. Again, in cell E7 I need to determine which of the eight data tables that record wins are also recording 20 minutes, but I need this in a single function and formula with the result appearing only in cell E7. Once this is figured out I will adjust the syntax to do the same thing with every column (these are not shown but they exist) in my consolidation table for the last three footer rows, named Win Column Totals, Tie Column Totals, and Loss Column Totals. The last three rows being footer rows may not be necessary, and if so, I can convert them back to normal rows. Nonetheless, my consolidation table is counting the totals of all data in all data tables. This much I've already accomplished. Now I have one last function and formula I'm working on in order to determine which of the eight data tables record wins, ties, or losses while it simultaneously counts which of the wins, ties, or losses fall within certain categories like elapsed time, and this will be shown on my consolidation table only in the last three rows. Yes, I've gotten the total wins counted, and separately counted the total number of times 20 minutes was the elapsed time used, but so far, just looking at my consolidation table I don't know if the total number of times 20 minutes was used was with a win, tie, or loss. That's what I need to know now. Everything else is already accomplished. So then my consolidation table will show the totals for all data fields in my eight data tables as illustrated in cells B3 and E6. The last three rows of my consolidation table will break this down in a single function and formula with one row for wins, a second for ties, and a third for losses. And each of these respective last three rows will in the same function and formula determine if the win, tie, or loss also is one of the data fields in my eight data tables. How? By the use of columns in my consolidation table. Remember, each of my eight data tables are identical. In the example in my first post I only used one data field, elapsed time (Time in Trade), to illustrate in one column on my consolidation table what I'm trying to accomplish with all of the columns not shown in my consolidation table. Once this is figured out I can adjust it to complete the remainder of the consolidation table. Thank you, t quinn.
To all reading this and attempting to offer assistance, if for any reason I'm still not explaining myself clearly, please continue to ask me more specific questions. I realize it's hard to communicate this way, and if Apple allowed us to upload the actual spreadsheet it would make this entire forum a better place to communicate. But that's going off topic, so let's simply focus on the matter at hand. Thank you.
Blessings!

In SharePoinr 2013. Unsupported Reporting Services Functionality The feature: "Power View" is not supported in this edition of Reporting Services.

Hi,
I am getting the below error which click "Create Power View Report" option in "Power Pivot Gallery"
Unsupported Reporting Services Functionality
The feature: "Power View" is not supported in this edition of Reporting Services.
I have uploaded "Power Pivot" excel file in "Power Pivot Gallery".
It is frustrating like anything. Can anyone help on it.
SharePoint 2013. SQL Server 2012. I have enable all the service applications success in CA.
Thanks in Advance.
Poomani Sankaran

Hi,
Please try to download the SP1 Edition of the rsSharePoint.msi
file and install it. You have to install the SP1 edition of RS if you are using SP 2013.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/2d2ecfae-b524-43f3-bf93-0bddfe904b75/the-feature-power-view-is-not-supported-in-this-edition-of-reporting-services?forum=sharepointadmin
Best Regards
Dennis Guo
TechNet Community Support

OWB bugs, missing functionality and the future of OWB

I'm working with OWB for some time now and there are a lot of rough edges to discover. Functionality and stability leave a lot to be desired. Here's a small and incomplete list of things that annoy me:
Some annoying OWB bugs (OWB 10g 10.1.0.2.0):
- The debugger doesn't display the output parameters of procedures called in pre-mapping processes (displays nothing, treats values as NULL). The mapping itself works fine though.
- When calling selfmade functions within an expression OWB precedes the function call with a constant "Functions." which prevents the function from being executed and results in an error message
- Occasionally OWB cannot open mappings and displays an error message (null pointer exception). In this case the mapping cannot be opened anymore.
- Occasionally when executing mappings OWB doesn't remember changes in mappings even when the changes were committed and deployed
- When using aggregators in mappings OWB scrambles the order of the output attributes
- The deployment of mappings sometimes doesn't work. After n retries it works without having changed anything in the mapping
- When recreating an external table directly after dropping the table OWB recreates the external table but always displays both an error message and a success message.
- In Key Lookups the screen always gets garbled when selecting an attribute as a join condition
- Usage of constants results in aborts in the debugger
- When you reconcile a table used in a key lookup the lookup condition sometimes changes. OWB seems to remember only the position of the lookup condition attribute but not the name.
- In the process of validating a mapping often changes in the mapping get lost and errors occur like 'Internal Errors' or 'Null Pointer Exceptions'.
- When you save the definition of external tables OWB always adds 2 whitespace columns to the beginning of all the lines following 'ORGANISATION EXTERNAL'. If you save a lot of external table definitions you get files with hundreds of leading whitespaces.
Poor or missing functionality:
- No logging on the level of single records possible. I'd like the possibility to see the status of each single record in each operator like using 'verbose data' in PowerCenter
- The order of the attributes cannot be changed. This really pisses me off expecially if operators like the aggregator scramble the order of attributes.
- No variables in expressions possible
- Almost unusable lookup functionality (no cascading lookups, no lookup overrides, no unconnected lookups, only equal condition in key lookups)
- No SQL overrides in soruces possible
- No mapplets, shared containers or any kind a reusable transformations
- No overview functionality for mappings. Often it's very hard to find a leftover operator in a big mapping.
- No copy function for attributes
- Printing functionality is completely useless
- No documentation functionality for mappings (reports)
- Debugger itself needs debugging
- It's very difficult to mark connections between attributes of different operations. It's almost impossible to mark a group of connections without marking connections you don't want to mark.
I really wonder which of the above bugs and mssing functionality 'Paris' will address. From what I read about 'Paris' not many if at all. If Oracle really wants to be a competitor (with regard to functionality) to Informatica, IBM/Ascential etc. they have a whole lot of work to do or purchase Informatica or another of the leading etl tool
vendors.
What do you think about OWB? Will it be a competitor for the leading etl tools or just a cheap database add on and become widely used like SAB BW not for reasons of technology or functionality but because it's cheap?
Looking forward to your opinions.
Jörg Menker

Thanks to you two for entertaining my thoughts so far. Let me respond to you latest comments.
Okay, lets not argue which one is better.. when a tool is there .. then there are some reasons to be there...But the points raised by Jorg and me are really very annoying. Overall I agree with both yours and Jorg's points (and I did not think it was an argument...merely sharing our observations with each other (;^)
The OWB tool is not as mature as Informatica. However, Informatica has no foothold in the database engine itself and as I mentioned earlier, is still "on the outside looking in..." The efficiency and power of set-based activity versus row-based activity is substantial.
Looking at it from another way lets take a look at Microstrategy as a way of observing a technical strategy for product development. Microstrategy focused on the internals (the engine) and developed it into the "heavy-lifting" tool in the industry. It did this primarily by leveraging the power of the backend...the database and the hosting server. For sheer brute force, it was champion of the day. It was less concerned with the pretty presentation and more concerned with getting the data out of the back-end so the user didn't have to sit there for a day and wait. Now they have begun to focus on the presentation part.
Likewise this seems to be the strategy that Oracle has used for OWB. It is designed around the database engine and leverages the power of the database to do its work. Informatica (probably because it needs to be all things to all people) has tended to view the technical offerings of the database engine as a secondary consideration in its architectural approach and has probably been forced to do so more now that Oracle has put themselves in direct competition with Informatica. To do otherwise would make their product too complex to maintain and more vendor-specific.
I am into the third data warehousing/data migration project and my previous two have been on Informatica (3 years on it).I respect your experience and your opinions...you are not a first timer. The tasks we have both had to solve and how we solved them with these tools are not necessarily the same. Could be similar in instances; could be quite different.
So the general tendency is to evaluate the tool and try to see how things that were needed to be done in my previous projects can be done with this tool. I am afraid to say .. I am still not sure how these can be implemented in OWB. The points raised by us are probably the fall out of this deficiency.One observation that I would make is that in my experience, calls to the procedural language in the database engine have tended to perform very poorly with Informatica. Informatica's scripting language is week. Therefore, if you do not have direct usability of a good, strong procedural language to tackle some complicated tasks, then you will be in a pickle when the solution is not well suited to a relational-based approach. Informatica wants you to do most things outside of the database (in the map primarily). It is how you implement the transformation logic. OWB is built entirely around the relational, procedural, and ETL components in the Oracle database engine. That is what the tool is all about.
If cost is the major factor for deciding a tool then OWB stands far ahead...Depends entirely on the client and the situation. I have implemented solutions for large companies and small companies. I don't use a table saw to cut cake and I don't use a pin knife to fall trees. Right tool for the right job.
...thats what most managers do .. without even looking how in turn by selecting such a tool they make the life tough for the developers.Been there many times. Few non-technical managers understand the process of tool evaluation and selection and the value a good process adds to the project. Nor do they understand the implications of making a bad choice (cost, productivity, maintainability).
The functionality of OWB stands way below Informatica.If you are primarily a GUI-based implementer that is true. However, I have often found that when I have been brought in to fix performance problems with Informatica implementations that the primary problem is usually with the way that the developer implemented it. Too often I have found that the developer understands how to implement logic in the GUI component (the Designer/Maps and Sessions) with a complete lack of understanding of how all this activity will impact load performance (they don't understand how the database engine works.) For example, a strong feature in Informatica is the ability to override the default SQL statement generated by Informatica. This was a smart design decision on Informatica's part. I have frequently had to go into the "code" and fix bad joins, split up complex operations, and rip out convoluted logic to get the maps to perform within a reasonable load window. Too often these developers are only viewing the problem through the "window" of the tool. They are not stepping back and look at the problem in the context of the overall architecture. In part Informatica forces them to do this. Another possible factor is they probably don't know better.
"One tool...one solution"
Microstrategy until recently had been suffering from that same condition of not allowing the developer to create the actual query). OWB engineers need to rethink their strategy on overriding the SQL.
The functionality of OWB stands way below Informatica.In some ways yes. If you do a head-to-head comparison of the GUI then yes. In other ways OWB is better (Informatica does not measure up when you compare it with all of the architectural features that the Oracle database engine offers). They need to fix the bugs and annoyances though.
.. but even the GUI of Informatica is better than OWB and gives the developer some satisfaction of working in it.Believe me I feel your pain. On the other hand, I have suffered from Informatica bugs. Ever do a port from one database eingine to another just to have it convert everything into multi-byte? Ever have it re-define your maps to parallel processing threads when you didn't ask it to?
Looking at the technical side of things I can give you one fine example ... there is no function in Oracle doing to_integer (to_number is there) but Informatica does that ... Hmm-m-m...sorry, I don't get the point.
The style of ETL approach of Informatica is far more appealing.I find it unnecessarily over-engineered.
OWB has two advantages : It is basically free of cost and it has a big brother in Oracle.
It is basically free of cost...When you are another "Microsoft", you can throw your weight around. The message for Informatica is "don't bite the hand that feeds you." Bad decisions at the top.
Regards,
Dan Phillips

Blackberry Accessibil​ity, function and features

Similar Messages

Maybe you are looking for

Blackberry Accessibility, function and features