Blackberry Calendar sync issues- Recurring Meeting not getting updated properly

I'm an IT person, all of our employees have been moved to microsoft office 365 recently. After that all blackberry users(BB Q10) in my company are experiencing some strange issues with recurring meetings.
All the recurring meetings created before 11 AM IST are not syncing correctly and going to the next day in calendar(time is same). However this is showing correctly on outlook, iPhone and windows phone calendars.
We are using exchange active sync for email setup. The meetings are created using outlook.
Its strange that the issue is only for recurring meeting created before 11 am IST, single meetings and recurring meetings created after 11 am is working fine.
We have tried configuring the mail accounts on android windows and iPhone, but those are all working fine. Its only causing issues with Blackberry.
Troubleshooting done so far:
1. Checked the time zone of BB and outlook, all configured to GMT+5.30
2. Re-synched the calendar
3. Recreated mail account
4. Restarted phone.
Can any one help with this?

Hi,
Pl ensure that you have made the following settings for running BBP_VENDOR_SYNC. http://help.sap.com/saphelp_srm40/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
Else run BBPUPDVD to update the vendor data.
Regards,
Nikhil

Similar Messages

Exchange Mails are not getting updated properly without refreshing

From couple of days, exchange mails are not getting updated properly without refreshing.
Kindly suggest.

Kindly suggest a solution

Master Data is not Getting Updated Properly.

Dear Expert,
I am trying to pull the data by Info package but The text is not getting updated.
The Master data object is 0BPARTNER . To update this Master data , we ghave 2 info packages
0BPARTNER_ATTR and 0BPARTNER_TEXT. But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
What could be the Reason for this and How can I solve this issue ?
Tahnks,
Utpal

Hi,
Could you please check the data in RSA3.
If everything is there in R/3 side.Then,please check are you giving any
condition in the infopackage .
Please run the infopackage without giving any condition.
Thanks,
Saveen Kumar

On reversal of Invoice the table BKPF not getting updated properly

Hi
I have an issue, that when we create the Commercial Invoice, accounting document generated automatically. And after that due to some reason when we reverse the same through VF11, the accounting document which was created while doing the invoicing not getting updated by "reversed with (STBLG)" field and "reversal Indicator (XREVERSAL) field in the table BKPF.
However when I test the some scenario in Development and Quality server the same field is getting updated.
I have already checked the Billing Document Type of SD and accounting document type but found everything in place.
I am unable to get what is missing,and why this is happening in Production server only.
Need your input at the earliest.
Thanks in advance
Regrads
AA

Hi
thanks to all for their suggestion, the issue resolved with the help of SAP.
For the forum members information :-
This is standard system behaviour.
BKPF-XREVERSAL is only populated/filled in the reversed original
and in the reversal FI document if BKPF-STBLG and BKPF-STJAH
are populated/filled in reversed original and reversal FI document.
BKPF-STBLG and BKPF-STJAH are only populated/filled in reversed
original and reversal FI document if the new/real cancellation
procedure (-> with automatic clearing of the open items) is executed,
and the new/real cancellation procedure is not executed, if an
open item of the original, to be reversed FI document, has already
been cleared (-> also see note 309208).
Regards
Amitesh Anand
Edited by: AA on Apr 25, 2009 11:37 AM

Portal Activity Report is not getting updated properly

Hi,
I have created a test portal activity report with the Reporting type set as Page/iView activity. I have added five iViews in this including a yahoo search URL iView. The reporting period interval is set to Fixed Period with the date range that spans for around 10 days.
The issue is, even after hitting these iViews several times, I don't see the portal activity report getting updated. Only for the yahoo search, I can see no. of Users as 1 and no. of Hits as 4 as a previous day report (today being friday, I could see thursday's yahoo iView report).
Here are the pre-liminary settings that I've done:
1. All the iViews have the 'Monitor Hits' as 'true'.
2. The Activate Data Collection is set to 'true' in the 'DataCollectionHook' that is available under com.sap.portal.activitydatacollector Service
3. The properties viz., Activate Portal Activity Report, Gather iView statistics, Page statistics..etc are all set to 'true' in the ActivityReport Service
4. I could see that the last aggregation time (in GMT) keeps changing every one hour without any problem.
Any help would be appreciated.
Thanks in advance!
Regards,
Yuvaraj SG

Hi Raghu,
I tried as per your suggestion. At first, I thought that it's working. But, the report came out only for one day (thursday's report) and there weren't any more reports after that. So, I don't think this approach is working in my case! Moreover, for me the requirement is that the iViews have to be in some other portal roles and the Activity Report iView will be in a different portal role.
So, I am currently checking the SAP Note 1084379 as Sandeep has quoted.
Thanks for your help!
Regards,
Yuvaraj SG
Edited by: yuvaraj s g on Jul 13, 2009 8:09 PM

Vendor data not getting updated properly

we have recently encountered a couple of issues where
1) a vendor was unblocked for all purchase org in ECC , but this was not replicated to SRM .In SRM , the vendor stilll showed as blocked in table BUT000
2) Vendor Name2 field was changed but was not replicated to SRM.
I have checked , the BBP_vendor_sync has been running properly and in SLG1 there are no errors.
what could be the issue ...is there any sap note for this ?

Hi,
Pl ensure that you have made the following settings for running BBP_VENDOR_SYNC. http://help.sap.com/saphelp_srm40/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
Else run BBPUPDVD to update the vendor data.
Regards,
Nikhil

TVARVC table not getting updated properly

Hi,
We are facing a strange problem...
First job runs to update TVARVC variable to a new value...let say 6 to 7....
Second job which runs immediatly after first job uses this variable in TVARVC to read the value picks up old value instead of new value....i.e. its using 6 instead of 7.
Also TVARVC variable is Fully Buffered table...Can anyone tell me eventhough this variable is updated with new value, why second job is picking old value..??? also i dint see any COMMIT WORK after updating TVARVC in program...i doubt if buffered and no commit work causing the issue...any thoughts???
Expecting your help.
Thanks
Hari

Hi Hari,
Is your update and the program that uses the update in the same LUW? You can create a function module, and run it "in update task". Then update your TVARV table, and run the other program from the function module.
This will put all the programs in the same LUW.
If for some reason your update to TVARV doesn't happen, and it abends, your other program will not be executed.
Just a thought,
Michelle

ProgressBar not getting updated properly

I am trying to design a multiple file uploader in the
following code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="vertical" creationComplete="init()">
<mx:Script>
<![CDATA[
import mx.utils.ArrayUtil;
import mx.collections.ArrayCollection;
import mx.controls.Alert;
import mx.events.ListEvent;
private var _fileReferenceList:FileReferenceList;
[Bindable]
private var _arrUploadFiles:ArrayCollection;
private var index:Number;
private var prev_index:Number;
private var flag:Number=0;
private var buttonType:Number=0;
private function init():void
_fileReferenceList = new FileReferenceList();
_arrUploadFiles = new ArrayCollection();
_fileReferenceList.addEventListener(Event.SELECT,
selectHandler);
dataGrid.dataProvider=_arrUploadFiles;
trace("in init"+_arrUploadFiles);
private function selectHandler(event:Event):void
{ var arrFoundList:Array = new Array();
for (var i:Number = 0; i < _arrUploadFiles.length; i++)
{ for (var j:Number = 0; j <
_fileReferenceList.fileList.length; j++)
{ if (_arrUploadFiles
.name == _fileReferenceList.fileList[j].name)
arrFoundList.push(_fileReferenceList.fileList[j].name);
_fileReferenceList.fileList.splice(j, 1);
j--;
var fileList:Array = _fileReferenceList.fileList;
var file:FileReference;
if (fileList.length >= 1)
for (var k:Number = 0; k < fileList.length; k++)
{ file = FileReference(fileList[k]);
_arrUploadFiles.addItem({name:file.name, size:file.size,
object:file});
trace(_arrUploadFiles);
if (arrFoundList.length >= 1)
Alert.show("The file(s): \n\n• " +
arrFoundList.join("\n• ") + "\n\n...are already on the upload
list. Please change the filename(s) or pick a different file.",
"File(s) already on list");
private function browse(event:MouseEvent):void
//_arrUploadFiles.removeAll();
//_arrUploadFiles.refresh();
var imagesFilter:FileFilter = new FileFilter("Images",
"*.jpg;*.gif;*.png");
_fileReferenceList.browse([imagesFilter]);
private function upload(event:MouseEvent):void
//var _fileList:Array = _fileReferenceList.fileList;
for (var i:Number=0; i<_arrUploadFiles.length; i++)
var urlRequest:URLRequest = new URLRequest("
http://localhost/FileUpload-debug/uploadFile.php");
var file:FileReference = _arrUploadFiles.object;
file.upload(urlRequest,'file');
file.addEventListener(Event.COMPLETE,
uploadCompleteHandler);
private function clearAll(event:Event):void
{ trace("in clear 1"+_arrUploadFiles);
_arrUploadFiles.removeAll();
_arrUploadFiles.refresh();
trace("in clear"+_arrUploadFiles);
init();
trace("again in clear"+_arrUploadFiles);
private function uploadCompleteHandler(event:Event):void
public function
buttonClickHandler(event:MouseEvent,type:Number):void
{ buttonType=type;
flag=1;
public function upClickHandler():void
//Alert.show("button on index"+index+"was clicked");
var urlRequest:URLRequest = new URLRequest("
http://localhost/FileUpload-debug/uploadFile.php");
var file:FileReference = _arrUploadFiles[index].object;
file.upload(urlRequest,'file');
file.addEventListener(Event.COMPLETE,
uploadCompleteHandler);
flag=0;
public function removeClickHandler():void
_arrUploadFiles.removeItemAt(index);
public function handleItemClick(event:ListEvent):void
if(flag && buttonType==0)
index=event.rowIndex;
upClickHandler();
if(flag && buttonType==1)
index=event.rowIndex;
removeClickHandler();
]]>
</mx:Script>
<mx:VBox>
<mx:DataGrid itemClick="handleItemClick(event);"
id="dataGrid" width="500" >
<mx:columns>
<mx:DataGridColumn headerText="File Name"
dataField="name" width="100"/>
<mx:DataGridColumn headerText="Size" dataField="size"
width="30"/>
<mx:DataGridColumn id="Progress" headerText="Progress"
dataField="object" width="200">
<mx:itemRenderer>
<mx:Component>
<mx:HBox verticalAlign="middle">
<mx:ProgressBar id="progress" label="" height="6"
source="{data.object}"/>
</mx:HBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Controls"
dataField="object" width="150">
<mx:itemRenderer>
<mx:Component>
<mx:HBox verticalAlign="middle">
<mx:Button
click="outerDocument.buttonClickHandler(event,0)" toolTip="Upload
file(s)" icon="@Embed('assets/application_get.png')"
width="26"/>
<mx:Button
click="outerDocument.buttonClickHandler(event,1)" toolTip="Remove
file(s)" icon="@Embed('assets/delete.png')" width="26"/>
</mx:HBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
</mx:columns>
</mx:DataGrid>
<mx:HBox width="100%">
<mx:Button label="Browse" click="browse(event)"/>
<mx:Button label="Clear All" click="clearAll(event)"/>
<mx:Spacer width="100%"/>
<mx:Button label="Upload" click="upload(event)"/>
</mx:HBox>
</mx:VBox>
</mx:Application>
Now the code works perfetly fine and file upload progress is
shown properly for the first time, but when clear all button is
used and i choose another set of files for uploading, the progress
bars rendered in the datagrid row of that file show complete
progress already at all those row positions where in previous
operation i had uploaded my files
This is like if i enter 3 files in the list and upload only
first 2 and then press clear list, in next operation when I choose
another 3-4 file, first two progress bars and then everyfourth and
fifth progress bar shows full progress already before uploading
those files.
Please tell me if there's some bug or its an error in coding

This sounds like the recycling issue. As though this binding:
source="{data.object}" is not firing when the underlying item
changes.
I don't use drop-in itemRenderers because they are too hard
to debug. Consider implementing this a a full itemRenderer instead.
That way you can trace or step through the set data() override to
see what is happening.
If you do decide to build a full renderer, do not start from
scratch, but find an example to modify.Google: Alex Harui
itemRenderer recycle.
Tracy

CPS parameters are not getting updated in SAP

We have recently migrated our SAP and CPs servers, after that we are facing few CPS issues and it is affecting lot of key batch jobs. One typical example is given below.
CPS is supposed to trigger a job DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006 and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g) It is showing as 4-jan-2011, I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
Has anyone faced similar kind of issue. share you experience
Regards,
Ramprasad.

Hi ,
PLease find attached out XBP version
XBP connection pool for SAP system ISU
XMI interface version           : 2.0
Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
Basically what happens is
So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are not used for due date calculation.. CPS just copies the source date-id to target id and similarly for the due date based on the difference
source_id variant date 01-12-2006   due date 02-12-2006 ( Next day)
Target_id Variant date 25-12-2010 due date 26-12-21010 ( Next Day)
I tried changing the Source date id from 01-12-2006 to 24-12-2010.
Source Variant date 24-12-2010   due date 04-01-2011 ( 10 Days)
Target Variant date 25-12-2010 due date 05-01-2011 ( 10 Days)
Regards,
Ram

Value property not getting updated for edit on firefox

Der Sir/Mam,
I am a selenium tester and my test fails on moxila due to following issue,
Value property not getting updated for edit on firefox thats why failing the script while identifying the object from xPath.
The test case run fine on IE.
I want to identify the object by its xPath saying value = "Some value"
I can not check thousands of object by looking in to its value attribute property.
Thanks in advance,
Rohit

I'm not sure whether we can solve your question here. We are mostly supporting the released version of Firefox (Firefox 20) for regular use rather than old versions in a test harness. You might need to reach out to the [https://groups.google.com/forum/?fromgroups#!forum/selenium-users Selenium Users Group] if you can't replicate the problem in Firefox 20.

View in edit window not getting updatet properly

Hello
I have some problems with the view in the edit window not getting updatet correctly. I noticed this in spectral view. For example, when I zoom in very much, so I only see about 3 seconds of audio and then select one second of audio and do a time stretch, so it will be two seconds of length, the windows does not update properly.
Normally the audio behind the strechted selection should move backwards, but often the strechted portion just sort of overlaps it and it doesn't move. When I zoom out and then back in, it seems to be ok.
I also have had very weird behavior when trying to remove clicks, with the view also getting pretty messed up.
Does anyone have similar problems with the view not getting updated properly?
I am running german windows xp, audition is installed in english. I first thought that installing it in english instead of german solves the problems, but unfortunately it didn't.
Greetings

Hello again
I made a movie of this behavior:
https://share.ols.inode.at/4NNYXR4HT2CJI5IHY273R9NRHRW9OLGR95Q7VTOP
It shouldn't look like that, right?
Greetings

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??
iPhone 5s
Software - IOS 8.1
iTunes - v12
I have been using sync on all previous phones to date without issue, I have had the 5s since Nov 2014 and no issue, on Sunday without warning or changes to my phone or Outlook sync now has this error.
I have restored my phone but still has same problem.

Your IT person is an idiot.
http://lmgtfy.com/?q=how+to+sync+iphone+with+outlook

Blackberry Outlook Calendar Sync Issue

We recently discovered a outlook calendar sync issue we can add items on the Blackberry and they will show up in Exchange. But you can’t change a calendar item from the Blackberry, e.g. if you create an item on the phone it will show up in Outlook, but if you use the phone to change the date or name of it Outlook will still show the old one.
We are running BES 4.1
We are running Exchange 2003
Exchange and BES are installed and running on different servers
OS of the server running BES 4.1 is WINDOWS 2003

Hi, Please do not post duplicate threads.
see here > http://supportforums.blackberry.com/rim/board/message?board.id=8300&message.id=37254#M37254
You are posting your message in device threads meaning normal everyday users are going to read it, if you want advice from administrators, please post it in Blackberry Enterprise Server area.
You also didn't put what full version of BES you are running! If you are running BPS, i will have it moved to the professional area.
Thankyou
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Outlook 2011 and mountain lion calendar sync issues... resolved (kinda)

Okay... I never really post to these boards, but I'm fairly ticked off that OS X keeps tampering with MS Office and it's syncing with iTunes and, ultimately, my iPhone. Apple support tried to push me onto the iCloud, but I'm not going to use that crappy feature. After many hours of trying to fix the calendar sync issue with MS Office 2011, I found a workaround:
1. Get the apple reminders set up to recognize the OS X Calendar program.
2. Confirm that your Outlook calendar data is recognized in the OS X Calendar program (it was always there for me)
3. Install MS Office 2008 (Entourage) --- You don't have to use it, but the older program still syncs with Mountain Lion.
4. Sync your iphone with itunes and ensure that your Calendars are erased (uncheck the Calendar sync box).
5. Click on the "Replace Information on this iPhone) for Calendars.
6. Re-sync the iPhone with iTunes.
7. The data should go up with no problem.
IF you are still having problems...
1. go to OS X "Calendar" and Add a new calendar called "Home".
2. move the Outlook data to the Home calendar (just drag and drop).
3. Repeat steps 4-7 above.
Since I've done these changes, everything directly syncs.
Hope this helps, and don't lose faith. MS will come up with some type of patch.

Outlook 2011 is not compatible with iCloud, it won't work and your 'workaround' may affect iCloud clients on the same account.
Don't use 2011.

Calendar sync issue on iPhone 4 with iOS 8.1.2

Hi,
Just updated my iPhone 4 with iOS 8.1.2, some of my calendar entries like birthday entries which I marked as an all day event for so many years are not getting updated on my iPhone 4 where my iPad mini with iOS 8.1.2 is showing the missing data. Can anyone help on this issue?
Thanks

Hi s.linus,
I see that you may be having an issue with the birthday calendars on your iPhone. First, make sure that your birthday calendar is activated on all of the devices that you wish to see it on:
Use multiple calendars - iPhone
http://help.apple.com/iphone/8/#/iph3d1110d4
View the Birthdays calendar. Tap Calendars, then tap Birthdays to include birthdays from Contacts with your events. If you’ve set up a Facebook account, you can also include your Facebook friends’ birthdays.
You may also need to make sure that your calendars and contacts are both being updated via iCloud in order to ensure that changes come through on all devices. Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

Blackberry Calendar sync issues- Recurring Meeting not getting updated properly

Similar Messages

Maybe you are looking for