Blackberry Classic does not show read in outlook when read on device for emails

The issue is that when an email is read on blackberry it does not show read on outlook on laptop and vice versa. Any ideas?

Need to know what type of mail server you are using. If it is Outlook on Exchange then they both will sync up, ie both show read when opened. If you are using POP email then it will not sync, you will need to open your mail on both to show as read. This is not a BB issue, it;s the nature of the beast with any phone. Now if your email provider supports IMAP,then set your BB up that way and it will synce so all mailboxes look the same.

Similar Messages

  • Ipod Classic does not show up in iTunes and will not sync

    My ipod classic does not show up as a device in iTunes. It was working just a week or so ago, but each time I plug it in the screen says connected, then switches to Ejected, you can now disconnect, then says OK to disconnect and then goes to the home screen. Can someone advise me on what is going on and what I need to do to fix it! Thanks!!!

    Hello MSavaski,
    Thanks for the question. Depending on your symptoms, the following articles may provide a resolution to your issue:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Also, the following troubleshooting assistant may be helpful:
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/classic/
    Thanks,
    Matt M.

  • Blackberry maps does not show map just a location

    Blackberry maps does not show map just a location on att with 10.0.10.822 os and software 10.0.10.116
    http://forums.crackberry.com/blackberry-z10-f254/blackberry-maps-not-working-818297/
    Solved!
    Go to Solution.

    Nope, I don't know the seekrit release dates
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    Please then use your web Browser  address http://www.adobe.com/  and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
    Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
    Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in  using the account that has the subscription the one you used above to Activate Photoshop.

  • I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

    Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    Which version of iTunes are you using?
    Stedman

  • 80 GB Ipod Classic does not show up in itunes or Win Vista Machine

    Hi, I recently updated my itunes software with ver.8 and since then my 80 GB Classic ipod does not show up in itunes or in my computer. Hence, I am not able to sync my itunes. When I connect my ipod it just shows "Connected - Eject before disconnecting" and just freezes there. Pls help?

    Hi. When I connect my ipod to any microsoft device, sometimes my ipod doesnt connect. I cant charge it, or restore it as it behaves like a useless piece of plastic.. I get a yellow bubble 'Device not recognized or has malfunctioned'
    This problem is bizarre! I cannot find anyone who actually has a solution for this problem! Apples standard answer is for me to reinstall my drivers or update itunes or windows. Done it. No solution yet.
    My ipod works fine.... sometimes. Its a completely unpredictable problem. Ive googled this problem and so many ipod classic owners have asked.. solutions ive tried: the 5r's, updating drivers, It managed to connect once, but now it wont. My ipod normally works fine on my PC, XBOX, laptop and Mac.. but sometimes, unpredictably, it wont be recognized by anything apart from the mac. For a month it would not connect at all and I took it in to an Apple store where they told me it works fine. Its not my PC.. its up to date, and theres no reason why it doesnt work on my XBOX because some times it does.. last night it did, today its broken again, I suspect tomorrow it may work. This is SO frustrating!!
    I have alot of experience in PC's and normally I can solve a problem by process of elimination, updating and reinstalling, but in this case.. everything seems fine. My only idea is that maybe its my Sync cable?? Which also makes no sense because it generally connects fine on the mac - and, why would a sync cable be unpredictable.. surely it either works or it doesnt. HELP PLEASE!!
    Nick.
    my email is: [email protected]
    my serial for my 80g classic is 8K819CPKYMV and is under warranty until May 2009, i bought it in August this year.

  • 160gb Classic does not show in Disk management

    Hi
    Ive had my 160gb ipod classic for about a year now and just recently it stopped showing up in itunes and it is not showing up in my computer. im running windows 7 64 bit. Ive looked for it every where in my computer, it does not show up in Disk management and when i plug it in windows says it does not recognize it. I ran the itunes diagnostic and it does not show the ipod being connected.  When i select it through the device manager it shows it as Unknown device and in the description it just says the "Windows has stopped this device because it has reported problems. (Code 43)" ive never seen this before. Ive also checked the drivers, according to windows theyre fine, at least thats what it tells me when i go to update them. and when i try to acces the driver details it says no driver files are required or have been loaded for this device. Im a bit frustrated because ive been looking every where and trying everything to attempt to fix this. Any insight would be appreciated.

    You could definitely try uninstalling the USB drivers and reinstalling them. If that doesn't work plug your iPod into another computer and see if it shows up. If it does problem is the PC, if not, problem is the iPod.

  • My homepage does not show the latest page when I open Firefox

    I have set MSN as my homepage but when I open Firefox it does not show the latest MSN page.

    '''''Has the site worked normally in Firefox before?'''''
    When you have a new problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    This will open a window listing the site's cookies, which you can remove individually.
    Then try reloading the page and logging back in. Does that help?

  • Does not show my hard drive when i try to install Tiger...

    I have a Powerbook G4 that has no operating system installed yet, so when i try to install Tiger, i have to put the DVD in while booting up. I went to the installing screen, and i agreed to everything and all, but when i got to the part where it asks where to install, my hard drive does not show up. I went to DISK UTILITY and chose to erase the entire hard drive (I dont have anything on it yet) and I also chose to repair it. It didnt have any needed repairs, so I went back to the install screen, and it still didnt show the hard drive as an option. It is a 55.9 GB hard drive, and when i erase it, the size does not change, so I know there is nothing on it yet. In Disk Utility, the details for the Hard drive says it is named CSD CAT060L, it is a Disk, the media type is Generic, and it is Internal. I have tried this many times, but the exact same thing happens. My DVD for Tiger was unopened, and new out of the box. If you need any information about what happens or anything, just ask.
    Thanks a bunch, Eshan.

    Try this:
    1. Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

  • In 5.0 URL does not show in location bar when I am using a second Firefox window

    I have a lot of problems when using a second window for Firefox 5.0. (I have two monitors and like an open browser on each.) One problem is that when I open a new tab, the URL of a site that I go to does not show in the location bar. It just says "Go to a Web site."
    I don't understand why a second copy of the browser acts so differently than the first. Can someone explain this to me? Is there any way to avoid this?
    FYI: I had the same problem with 4.0 and reinstalled an older version. But the newest version of WordPress suggested upgrading Firefox, which I did.

    Thanks so much for getting back to me. I am familiar with your solution and tried it. It did not solve this problem.

  • Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

    I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
    I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
    This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
    Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
    Thank you

    I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

  • HT1688 How do you set up photo streaming to your home computer/windows?  My computer does not show an iclod icon when I go to the control panel/network and internet

    How can I set up icloud phote streaming to my home computer? 
    When I follow their directions my comuter does not show the Icloud icon uner the control panel / netwrok internet

    http://www.apple.com/icloud/setup/pc.html
    To enable iCloud on your Windows PC, first set up iCloud on your other devices, then install the iCloud Control Panel for Windows (Windows Vista with Service Pack 2 or Windows 7 required).

  • Ipod classic does not show in itunes or my computer. Can anyone help?

    I'm hoping someone can help me out.
    I've had my Ipod classic 80GB for about 5 years. Yesterday for the first time, I encountered a major problem. My Ipod does not appear in either Itunes or My computer when connected by USB to my laptop.
    The I pod just displays the message 'connected - eject before disconnecting'. Also my Itunes and internet explorer freezes while the I pod is connected.
    I've researched the problem online all day and still no solution. Have already reset the Ipod to factory settings, performed diagnostics both on i tunes and disk mode on the ipod itself. The latter displays the information 'Reallocs 0 and Pending Sectors 2, which from my research indicates that the disk drive on the ipod itself is still ok.
    Is there something I'm missing here? Or is it time to get a new Ipod classic?
    Would be extemely grateful for any advice.
    Thank you
    Dario

    - however once i reached the crutial stage of
    actually switching the 'terminal services' from
    disabled to manual, I get an error message on my
    computer "Error 5: Access denied" and nothing on the
    site gives any indication of what to do in such an
    eventuality.
    Do you have an administrator account on your computer? If you are not logged in as administrator, do so before attempting to change the to manual. However, I myself am having the same problems with my own ipod..

Maybe you are looking for