BlackBerry Connection Problems

Hi I hope someone can help me brought a blackberry 3g at the weekend and I can't seem to connect properly .
My network is 3 And I have a contract with them and I'm using that sim in my blackberry.
I keep getting this message everytime I go on to the Blackberry App World :
We Cannot connect you to BlackBerry App World. Please ensure that your device is connected to wireless network and try again
I do have it connected to my wireless and I have tried with out but no luck.
Also can't seem to set up my email accounts and I really need this for work . I keep getting this:
Activation request failed. A service connection is unavailable
And asks for an activation password
this also goes for when I try and get on Facebook An I get This :
You are currently on a service plan that does not support this application. If you want to use this application, please contact your service provider to upgrade your data plan !
And Twitter I get this
Could not find a service book entry for IPPP
Hope you can help
thanks
x

I've replied to my own request! I had to contact Microsoft and they identified many driver faults. Remotely it was all sorted and I am now connected to B/link but cannot yet get it to sync via USB with my media. But at least the first problem is resolved

Similar Messages

OSX & Blackberry Connection Problem

Hi,
My blackberry and mac have always connected just fine, the other day i installed the new OSX snow leopard on and my black berry was still connected fine, however i didn't have any software to sync my address book so i downloaded blackberry desktop software from here (http://us.blackberry.com/apps-software/desktop/desktop_mac.jsp) and once it was installed my blackberry dissapeared from my comptures device list and i havent been able to make it re connect. I tried uninstalling the software,
I also tried options-media card-enable mass storage but it still says 'yes when connected', still nothing though. Any ideas?
Thank you

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Activation Issue - Blackberry Connect with e61i on...

Hi,
I have been using the Blackberry Internet Service on my e61i with Vodafone UK for the past 9 months.
Today I upgraded the e61i firmware to version 2.0633.65.01, and the Blackberry Connect 4.0 7.45.0, but I am unable to re-activate the Blackberry service with my operator, Vodafone UK.
I also tried the BB Connect 4.0 version that is recommended on the Nokia site to work with Vodafone UK, but no luck either - possibly as the new e61i firmware is not backwards compatible with the older BB Connect 4.0 7.17.2 release.
My guess is that Nokia have not validated the latest BB Connect 4.0 7.45.0 version to work with the e61i on Vodafone UK's Blackberry Internet service, but I am stuck?
I thought of re-installing the older e61i firmware that did work, but I cannot seem to find a link to download versions other than the latest release (via the Nokia software updater) from the Nokia site?

24-Feb-2008 10:30 AM
nihonsurfer wrote:
Ahhhhh, I am not alone :-)
I have posted already a couple of messages - no reply so far. I have done the same upgrade like Patrick- with German's T-Mobile. So, it does not seem to be the provider whi i sleeping here. I asked already in 4 Club Nokia Service Points and two already commented that Nokia is releasing theor firmware at times too quickly and before having validated the most important applications on compatibility.
I really, really hope that Nokia realises that all those potential eg. E61i fans are up against the Blackberry fraction and if they cannot maintain their BBConnect SW up-to-date they will loose a bunch of "business users" to their competitors which are hooked to a BB enterprise server with no choice of another corporate mail handheld system.
Just wanted to share this with you so that you don`t waste your time finding what YOU did wrong in your upgrade. Been there done that.
Pleeeaaasse submit if anybody has an idea.
nihonsurfer
i believe this link might solve the problem, i did the same thing but this version of the bbc software solves the problem, at least it works on vodafone uk :-)
http://www.businesssoftware.nokia.com/blackberry_downloads.php?note=&re=EMEA&op=Other&pm=E61i〈=

Re: E61 Blackberry Connect

hope you can help me. I downloaded Blackberry Connect on my E61 and its there - I JUST CANT FIND IT. T-Mobile says i need to get the PIN number so ican use Balckberry Connect. HOW DO I FIND THE PIN in my E61? please help me (I'm desperate). ANDY

I have the e61 and went thorugh install procedure w/ no problems.
I recently recieved the e50 and tried the same blackberry connect install package and it did not work. The install says it successfully completed but 'blackberry' is not avaialbe when going to the 'messages > ...' menu path. I viewed the log file (using windows explorer while connected to the pc suite, log files are at root) and it said the product version is not compatible.
I went to nokia business software download site and found a new blackberry connect install package under the e50 phone (for Europe) and attempted to install. 'Blackberry' is still not available in the 'messages > ...' menu path but the app is installed under device applications. I'm using the phone in the US...
Has anyone been able to resolve this issue?
thanks.

Blackberry Connect opening email attachments

I'm having some problems with my blackberry connect software (4.0.0.106). I connect into my bes server (4.1.6.14) with my AT&T tilt. when I read an email that has a powerpoint presentation in it, all I get are the slides with nothing on them. if there's graphics for the slide, then it just shows:
------slide1-------
------slide2-------
some garbage text
------slide3-------
I think you get the idea. if I extract the attachment on my computer and copy it to my phone, powerpoint displays it accurately. it appears that there might be a quick view that won't let me do anything other than look at the TOC which is useless. is there a way to make the application that owns the attachment type open the attachment on my PDA?

Hello,
Ok, I'll have a crack at this....
The ability to view Powerpoint attachments is only available with BB software version 4.5 onwards.
I am assuming that the same is true for BB Connect (but I dont even know what version the BB Connect is up to!)
In additon I am assuming that the BB Connect does not pass the cdocument to the OS to view - that would also explain the reduced functionality. Can you view powerpoints on the Tilt natively? (Never hear dof the tilt - sorry!)
Unfortunately you will have to goto the the AT&T website to see if they have a newer version of the COnnect software for the Tilt.
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Timeouts and connection problems after 5.1(2) upgrade

AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
Any known issues with the 5.1(2) that would cause this type of problem?

I don't know specifically, but I did notice that 5.1(3) was released today.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

RFC Receiver adpater Connection problem , Help us to solve ?

Hi Friends ,
 Our scenarilo is Mail to RFC. It was running fine. In RFC Receiver adapter i have given Maximium connection property to 1 .
 While multiple set data passed to rfc will connection problem will come ?
 Most data not uploaded . I am getting the following error.
 If i set max connection to 5 . It is 5 times or more than that it is pusing the data .
 i am getting the following error while i set the Max connection to 1 . . Any other place i need to change configuration ?
 - Error: 2007-09-24 10:51:22 GMT-05:30: Message processed for interface YRFC_EXT_WARR: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[CC_EXTE_WAREN_2W_RFC_RECEIVER]e7fa21f86ec535e883636c0beffc0f0c is exhausted. The current pool size limit (max connections) is 1 connections.
 Please give the description . I have referred many likns . Help us to solve this problem .
Regards.,
V.Rangarajan
Message was edited by:
 ranga rajan

Hi,
Have a look at this.This will help you.
1.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2
2. https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
 Akshay Jamgaonkar

Unending connectivity problems -- and Desktop Help...

I'm wasting so much time on connectivity problems that it's positively wearying. Prior to the installation of BT Infinity here in April, I had a low quality broadband service because of the length of the line from the exchange: if I could get a download speed of 1.2Mbps and an upload of a quarter of that, I was doing well.
BT advised that thanks to fibre optic, my Internet should run much faster. So we had Infinity installed. I'm registered with Speedtest.net so am able to see my performance record.
The average download speed is now aroun d 6Mbps and the average upload, more than that at 7Mbps. How an upload speed can consistently be faster than a download escapes me.
But I'm not familiar with the ways of Internet connectivity and try as a I might, can't get my head around it.
This desktop computer runs Vista OS. Vista was **bleep** when it came out and is renowned for its botched handling of Internet connections. So I'm not blaming BT for the literally unending connectivity problems that are occurring now, with line drops, speeds slowing to a crawl, and no guarantee that any connection will last. But it would be good to actually use BT software to help fathom out what's going wrong here, and today's typical morning which looks like this:
1) Boot up computer. Automatic connection to hub via Netgear USB wireless adapter. Hub is on ground floor of this 3-storey property but signal strength from hub is excellent, as confirmed by inSSIDer monitoring, currently showing 54 with no other networks anywhere near that figure.
2) Perhaps 5 minutes after connection established, it's then lost. 'Local Only' is displayed. This is, apparently, a known Vista problem. But Microsoft has issued a fix for it. I know this, because it took 100 hours of ploughin g the Net to find out that MS had finally admitted to one more Vista screw-up. I've used the Microsoft router "fix it" before and it didn't work ("failed to process") so uninstalled it and have DL'd it again now and run it. This time it says it has fixed everything.
3) Computer is re-booted to make the fix effective. Computer connects to Internet. Speedtest.net check yet again confirms that upload speed is faster than download speed.
4) Connection dies. So much for Microsoft Fix It.
5) Windows diagnostics reports that it can re-set the IP profile (or something.) I click yes. The re-set goes through. Connectivity is restored. 10 minutes later, connectivity is lost. Just a red X in the tray. No connection of any kind, not even that daft 'Local Connection' only alert.
6) Reboot. Yet again. BT Desktop Help was installed here and ran OK when we were using our Netgear DSG34 router. But since the change to the BT Hub, the BT program has never run at all. So-oo. . . It has been uninstalled. And then re-DL'd and re-installed. And though the installation has been completed, clicking on 'launch' has failed to launch anything. But anyway. An hour ago, in one of the brief periods today when the Internet connection was holding up, I Revo-ed out the earlier install, DL'd BT desktop Help and re-installed it. . . and I'm still at the same stage as always, with a Firefox browser page that's open and completely blank and has been for the past 30 minutes. The URL is:
file:///C:/Program%20Files/BT%20Broadband%20Desktop%20Help/btbb/Start.html
Repeated page re-loading gets nowhere. Malwarebytes PRO is turned OFF to prevent any possibility of blocking and the antivirus is termporaily SUSPENDED. This PC runs on Windows standard firewall but even turning that OFF doesn't get the page to load. Copying the address into Internet Explorer in case there's a Firefox problem merely results in Firefox being opened and the same blank page running there.
7) After all that. . . Connection lost yet again and this time, Windows cannot connect at all. It reports that the "wireless network security key is not correct". I happen to know that it is, because this is maybe the 20th time it has reported this in the past 10 days and every time I have to key in the "correct" key all over again. . . at which point Windows still says it isn't correct and cannot repair.
Turning off the computer completely, unplugging from the wall, holding in the power switch for a full minute to clear the circuits, traipsing up and dowen three flights of stairs to turn off the hub, then wait, then turn the power back onm again. . . Ah, wot fun times I'm having here with my particular versioin of Infinity (as in, an infinity of connectivcity problems.)
Summary: I seem to be being simultaneously hit with one issue after another.
I'm bewildered as to why ever since Infinity was installed here, my upload speed is generally faster than my download speed. I'm not happy with endless Internet connection failures though am thinking that Vista is playing a large part here with its "wrong security key" and unending 'Local Only / Limited Connection' failures. I do miss my Netgear router and the ability to access a fantastic help menu and re-boot directly from the desktop without having to keep going up and down three flights of sdtairs to do so (I haven't been able to find out how toe access the BT Hub remotely.)
Above all though: I'm really tired of repeatedly trying to run freshly downloaded and installed BT Desktop Help software but getting no further than a blank page because the program has stalled.
If anyone has any advice / suggestions, other than to buy a carrier pigeon, that'd be much appreciated.
Thanks.

Thanks again to John and gg30340. Here's an update:
1) BT Desktop Help removed completely from this computer. The uninstaller itself mopped up everything, which surprised me. But anyway.
2) Bt Home Hub manager set up and working. Had to input serial number and create new password. All of this sounds fairly easy and would be if one had the device near the desk. But the idiots who built this property shoved the BT master socket inside the garage next to the door. Our two home computers are on the third floor. To ensure the wireless signal strength is OK, the Hub and Infinity module/device/whatever it's called are on a high shelf. It's a major job to even reach the darn things, never mind read the labels seeing as how the BT Infinity engineer was good enough to tidy up the cabling and make a very tight connection to the wall socket.
3) I had hoped to be able to back up the Hub's settings, seeing as the software provides for Advanced Settings / System / Backup. But not on mine (Hub 3.0). All that System allows is choosing which internet clock to define the accurate time. Everything else in System is just a pattern of short lines as if trying to indicate that there's some text there but it's invisible.This is now my second encounter with BT software which, for whatever reason, isn't functioning as it should on this PC.
4) Hub reset to factory fresh, according to BT guide.
5) Reset appears to have achieved nothing apart from requiring the password to be popped in again. After reset, it wasn't even possible to connect to the hub manager. Internet connectivity was eventually established for all of 30 seconds and then, gone.
6) Computer was shut down and then booted anew. Internet connectivity is still. . . dreadful. One minute everything's fine and then, literally,. the next minute a webpage won't load. Even opening the Hub Manager has taken three attempts, i.e., disconnecting from the Internet, re-connecting, failing, and trying twice more until success. Yet all the time these failures are occurring, the tray icon is showing a steady, unwavering green icon for Local and Internet access -- despite the fact, there manifestly isn't any.
7) Speedtest. net tests are actually showing upload and download 'trajectories' going slower and slower and finally halting at some point on the arc, then after a period of up to 30 seconds, suddenly becoming animated again. Speed test results with broadband speed checker UK and Think Broadband's checker are so at variance with one another, and with Speedtest, net, that it seems all three are using different technologies in pursuit of the same thing. Either way, upload speeds continue to be much, much faster than download speeds, a state of affairs I certainly have never encountered before.
8) Speedtest net tests taken in the past 10 minutes, with one test following on from its predecessor, begin at 8.24 down/8.88 up, followed by 5.24 down / 6.40 up, followed by a mind-numbingly lonnnnng 0.62 down / 8.70 up -- in other words, a continuous yo-yoin g of Internet connectivity to the pooint that it actually might as well not even be here (I've had to make five attempts just to get on to this forum. . .)
9) BT Speedtest will necessitate disconnection of everything downstairs and all boxes being lugged up here. This is actually going to require uncoililng tied-off cabling and hanging off a stepladder to do so -- though I surely can't be the only person in Britain who doesn't have a nice, handy BT master socket in their study or lounge. That said though: until we switched to Infinity, we *never* experienced these kinds of horrendous connectivity problems and never had need to unplug the Netgear router downstairs and bring it upstairs to connect directly to tjhe desktop PC so BT's own test could be run.
I'll just have to get to work dismantling stuff tomorrow. However, I have to say that after a factory re-set which has changed nothing at all, I'm beginning to think there's a problem with the BT line itself (hence why I'm happy to follow the advice here, though less than happy at the prospect of the messing about involved.)
Thanks, you two, for your patient help, and also for clarifying the situation re the three signal paths being shown on inSSIDer. At least I know that's usual now! And now, hopefully, when I press 'Post', I won't be faced with an endlessly spinning Firefox circle culminating in what may well be, or seem to be, the 57,938th time today of seeing "Page Not Found". . .

PHP and MySQL Connection problem

I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.

I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
>

TS1538 my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

my ipad can not continue to download ios 6.1.2 because of connection problem and it is stuck in connect to itunes image, i cant open it anymore..what should i do? help plz

Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?

Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.

Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections

Network connection problems, please help!

I have had an iPod Touch (4th generation) for over a year now and it worked fine. Today, something went wrong with my network connection. One moment it says that I'm connected to a network, and a few seconds later it says I'm not connected... Then a few seconds later it's connected again. I have full wifi bars, and it does it throughout my whole house. The wifi symbol keeps going on and off. I tried turning my Verizon Westell Model 6100G Modem off and back on because this normally fixes my wifi connection problems. This didn't work. Then I tried turning my iPod off and back on. This didn't work. I tried turning the wifi off and back on. This didn't work. I tried forgetting my network and signing back in. This didn't work. I also tried resetting the network, and this didn't work either. I'm not having any connection problems with my laptop, it's working fine. It's only my iPod. I'm still able to use the wifi, but for a split second, it will not work. I'm not sure what else to do. It's very annoying! I'm going to see if it does this at other peoples houses with their wifi. Can any one tell me what's wrong and how I should fix it? My only theory is a broken antenna...Please help! Thanks!

I have two things you could try.
1. Plug your iPod into the host computer that which the network is based around because sometimes the network has trouble identifying a device if it has been a while since you plugged it into the computer.
2. Find some way to get your network information (IP address, Subnet Mask, Router, DNS numbers) from another device on the network (e.g. laptop). Then go to Settings > Wi-FI and find your router and tap the blue arrow to the right of the name and tap the tab that says "Static" and enter this information accordingly. Then exit back to the network names menu and re-enter your passcode for your network (assuming you have a passcode)

How to change default software in Blackberry Connect 4.0 for opening attachments

I have downloaded and installed Adobe Reader LE 2.5 to a Nokia E51 running Blackberry Connect 4.0 to overcome an issue with Adobe attachments not displaying files correctly.
When opening Adobe attachments in Blackberry Connect 4.0 it uses Adobe Reader LE 1.5 not the later version.
I can open Adobe files resident on the phone and card memory using Adobe reader 2.5 OK.
I am unable to save attachments from Blackberry Connect 4.0 to the phone or card memory to be able to use v2.5
Is there a way to change the default attachment software Blackberry Connect 4.0 uses on the Nokia handset?
Quick Office Support advised is a Blackberry Connect 4.0 Issue.

The current version supports only 'push pull' email and calendar services. It effectively works using an older BES server functionality. As I understand it, the 4.0 version supports the BES 4.0 feature set. This should allow for full synchronisation of email, contacts, and calendar / to-do items. It apparently also supports the latest admin features such as enabling the device over the air (rather than using the desktop client for this).
While the current version is certainly better than nothing, having the full BES 4.0 feature set would be a huge step forward in my opinion.
-N-

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

BlackBerry Connection Problems

Similar Messages

Maybe you are looking for