Blackberry Curve 8520 Won't Lock! Help!

I recently purchased a new Blackberry Curve 8520, and it was working great, until a couple of days ago, when it starting not working.
Whenever I'd press the a* button to lock it like you're supposed to, it wouldn't lock.
I tried shutting it off and then turning it back on again, but it still won't lock.
It's really annoying, because I can't put it in my pocket without pocket-dialing someone from my contacts.
Any ideas on how to get it to lock again?
Solved!
Go to Solution.

dwapurity wrote:
Hello! I've tried your suggestion and my 'a'/'lock button' is still not working! Any more suggestion?
Hi
Whats the version of the operating system please. Go to Options > About and it looks like OS 5.0.0.681 (which happens to be mine).
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

Similar Messages

  • My Blackberry Curve 8520 won't connect to my Windows PC!

    I have been having problems with my Blackberry Curve 8520 as it won't connect to the computer. I have switched on mass storage mode, all my pictures and such are saved to my memory card. I have installed the blackberry desktop manager and my PC still does not recognize my Blackberry. It just starts to charge and go on the clock face. My Blackberry is the V4,6.1.314..So, basically whenever I connect my Blackberry to my computer it just starts to charge!
    ANY HELP? This has been bugging me for ages!

    Hi ilovetohelp,
    Welcome to the Suppport Community!
    This article should help youwith connecting your BlackBerry with your PC. http://bbry.lv/mydQVW
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Blackberry Curve 8520 won't turn on or charge

    My blackberry curve 8520 will not turn on,there was a red light on for a minute! Took out my sim card,memory card & battery and tried to charge it then. It came up for literally one second a drained battery sign. Really don't want to send it away, any help would be great Thanks!

    Leave the device to charge 2-3 hours, and then, still connected to the charging cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • PLEASE HELP!!!!!!​!! BLACKBERRY CURVE 8520 WON'T STOP REBOOTING

    I WAS UPGRADING ONE OF THE APPS ON MY PHONE, WHEN ASKED TO REBOOT NOW/LATER FOR COMPLETE INSTALLATION I CLICKED REBOOT NOW....... :@ SO FRUSTRATING, BECAUSE THE ONLY THING THAT SHOWS UP ON MY PHONE IS A WHITE SCREEN WITH THE HOUR GLASS MOVING, THEN AFTER SO MANY MINUTES IT TURNS OFF THE LED LIGHT(WHICH IS RED) COMES ON THEN THE WHITE SCREEN RE-APPEARS...THIS IS CONTINUOUSLY HAPPENING........WHAT CAN I DO TO STOP THIS MADNESS
    Solved!
    Go to Solution.

    Bro Remove the Battery and re-insert , if problem persist please attach your phone with a laptop and go or an up gradation .
    If your phone do not take Up gradation or Software re installation please visit nearest Blackberry Service Center for quick solution.
    Regards,
    Samarendra
    Please click the Thumbs Up icon if this comment has helped you!
    If your issue is resolved, please click the solution button on the resolution!

  • Curve 8520 - won't lock when going into case

    I have a magnetic Blackberry case and have set my phone under password options to lock handheld upon holstering but it doesnt do it....any ideas why??

    dwapurity wrote:
    Hello! I've tried your suggestion and my 'a'/'lock button' is still not working! Any more suggestion?
    Hi
    Whats the version of the operating system please. Go to Options > About and it looks like OS 5.0.0.681 (which happens to be mine).
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Blackberry Curve 8520 - GPS/Location Settings Help

    Hi All
    I had this working the other day and on 'location setttings' it had my gps point with longitude/latitude and all that malarky, and I was able to check in using facebook places. I turned my bluetooth off an then when I went back into location settings the GPS part had dissapeared and GPS data source now says 'None' and Location Services so says 'Location Off' and you CANNOT change these 2 options
    Whats going on? It was working the other day?
    Thanks in advance for any help
    Chris

    Correct, no 8520 has built in GPS.
    Either you never had it, or you were connected a GPS receiver somewhere.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Every button on my blackberry curve 8520 has stopped working help!!!

    Hi all, i dont know if this is a popular question but all the buttons have stopped working on my phone it started with a few of the not working like the n button the o button ect and the the other day all the buttons just stopped can someone help me to see if its a softwear issue or a problem with the phone itself. thanks 

    It sounds like what I have seen multiple times on a device with moisture damage.
    Even sitting on a bathroom counter during a hot steamy shower or bath can cause keyboard and trackball problems UNTIL properly dried out. It really is more common than you think.
    1. Remove the battery immediately!! Do not attempt to turn on your BlackBerry.
    2. Let the device dry in a warm, dry place for 3 to 5 days* (see below)
    3. DO NOT "check it each day" by placing the battery in. Leave it be to dry completely. This takes time. Replacing the battery to check it can only damage it more (moisture + electrical current = disaster).
    4. If the device is warm after the drying period, allow it to cool to room temperature before placing the battery back in.
    Suggestions on drying your BlackBerry in a warm place (open, with the battery out):
    *Place the BB in a container of dry UNcooked rice, and then you might also place it in any of the locations mentioned below.
    *On top of any dry heat emitting electronic component: TV cabinet or CRT, LCD, cable TV/Satellite converter box or plasma monitor
    *On the dashboard of your car on a sunny day
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry Curve 8520 won't start

    Hello
    I have an issue with my blackberry . After upgrading my facebook application , and rebooted , once i see the home screen , i get an error , and the device reboots . I can't get to the options and hard reset because it doesn't let me . Is like a loop , restarts by itselfs , gets the error  reboots again . I can't use my phone . Its a shame to get my phone destroyed because of an update .
    Is there a way to hard reset it without accessing it ? I have tried to remove the battery for a few seconds and plug it back in but doesn't work , same error , reboot .
    Please someone help me .
    kind regards
    shak

    shak, yes that would be my next try.
    Connect to the PC and run the BlackBerry Desktop Software.
    You should get a popup to update or repair or cancel.
    Click on Update.
    This may delete all your information off the BlackBerry, and may restore it. Hopefully you'll get a restore.
    If not, you may be starting back with a totally fresh device. If you have a previous backup of the device, you can restore.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BlackBerry Curve 8520 Won't turn on

    Hi all,
    Yesterday my BB8520 froze and I pulled out battery and pull in again after i pull in the phone doesn’t wont to start it just blink my led red 1 long and after series of 4 short blinks.
    I read a lot of forums and I tried everything like loader and etc. but the main problem is that my pc doesn’t recognize my bb. I already try with different cables and other pc but steel same story.  I put on wall charger to be charged all night but nothing change as well I pull out my battery more than 4 hours nothing change again it’s any possibility this phone to be putted in some kind of flash mode which will help to be recognized by my pc. And steel I don’t know does it charge my phone when is in this mode because I think that I have only 3 stripes when I pull out my battery.
    Many thanks

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry curve 8520 won't connect to router/network

    My children are unable to connect their Blackberrys to the home network with this new router(Thomson Technicolor 582?)  . With the previous router (585?) all they had to do was scan for available networks and then when ours appeared they put in the password.
    But with this one when you scan and find the network and try to connect you get the message "this wireless router supports wi-fi protected setup. To connect using a PIN (which your Blackberry will generate), click Next". Then when you click Next you get an 8 number code. it doesn't give you the opportunity to put in the network password.
    Please tell me how to connect the Blackberrys to our network. thanks

    Hi mumsgirl,
    When you are connecting to your Wi-Fi® network using WPS with the PIN generated on the BlackBerry® smartphone, the PIN will need to be entered into your router. You should be able to access this by logging into the configuration page of your router.
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • My blackberry curve 8520 lock!

    hi everyone! i have a blackberry burce 8520 in black and i really want to know how i can change my mute/play key on the top of my phone, to lock and unlock my phone? could someone help mee thanks!

    Hi denisssilva94,
    Welcome to the Support Community!
    I would suggest first testing your BlackBerry® Curve™ 8520 smartphone with another battery to rule out any issue with the battery itself.
    If you have the same issues when using another battery, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.
    For further instructions, please see the following KB articles.
    For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
    For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
    Please test to make sure the issue has been resolved before restoring any data from your backup file.
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • My Blackberry Curve 8520 turns itself off, lock and get a white screen.

    Whenever I'm making a connection, it starts to give strange noises during the call and ends up shutting down completely. When I try to turn it on again, it starts loading the OS, when the progress bar loads halfway, he gets the white screen and locks up completely, making it impossible to use again. The Blackberry only back to work only when connected to the battery charger. I hope someone can help me! Thanks in advance. The text can be somewhat meaningless, because I'm from Brazil and translated using Google Translator.

    Hi denisssilva94,
    Welcome to the Support Community!
    I would suggest first testing your BlackBerry® Curve™ 8520 smartphone with another battery to rule out any issue with the battery itself.
    If you have the same issues when using another battery, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.
    For further instructions, please see the following KB articles.
    For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
    For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
    Please test to make sure the issue has been resolved before restoring any data from your backup file.
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Curve 8520 won't turn on all the way, please help!

    I have a blackberry curve 8520, i bought it last month sometime.
    I woke up yesterday morning and the balckberry was off, and would not switch on after i pushed down the ON button. So I charged it for a while, and still, it wouldnt switch on. Then, i took it off charge, took out the battery put the battery back in and it rebooted. The loading bar went right to the end, and the logo of my service provider appeared. And that's when it stopped loading. All that will show is the logo, it wont turn off, unless i take the battery out again.
    I had downloaded an app the night before it stopped working off appworld, could that have affected it? I tried to link it to my computer, but it wont let me remove or add applications.
    I did take out the battery for hours, and the SD card. It still wiil only turn on until my service provider's logo.
    PLEASE HELP! Any advice would be helpful. 
    Solved!
    Go to Solution.

    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

    I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !! 

    Hey BaByPaW1990,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.  
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • HELP PLEASE! Blackberry curve 8520 - keep getting stuck on "white screen"

    Hi i only have this blackberry curve 8520 for like 3 days and already its getting stuck on the "white screen" i experienced this problem with my previous blackberry and after several battery removals it broke and wouldnt turn on again and NOW this new blackberry with the same white screen problem! please HELP ME ANYONE PLEASEEEEEEEEE!!!
    thanks  

    Do you have a media card installed? If so, remove the battery while the phone is powered on, remove the media card (leave it out), then reinsert the battery and let the phone fully reboot. See if that makes a difference or not.
    "Cats may taste like chicken, but they have more bones than rabbits."
    Blackberry 101
    Tips & Tricks
    Videos to learn from on youtube

Maybe you are looking for

  • Table in Schema1 using XMLIndexes But not in View- Schema2

    Hi, We are using : Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit I have a view with following query: CREATE OR REPLACE FORCE VIEW VIEW_TNAME XML AS SELECT Column_Name FROM TNAME WHERE XMLEXISTS ( 'declare namespace Namesp1 ="Abc:S

  • Thumbnails- how do I see the image?

    Help- I heard there is a download patch for this, but I don't know which one it is!! Every time I upload RAW files to my computer the thumbnails are an Adobe icon and not a smaller version of the image (unless I am in Bridge, then they are the image)

  • ICloud Password in Mail Problem

    Why does mail keep asking the following: Enter password for account iCloud. The iCloud IMAP server "p07-imap.mail.me.com" rejected the password for user. What is this all about, why and how can it be solved? thanks

  • Options run vf11 in background mode

    Do we have an option to run VF11 in background mode? We have large invoices to be cancelled and VF11 gets timed out. BASIS defintely helps by extending the time out setting, but tryign to see any smarter options. Regards Vinod

  • Updated to 10.1 now old project opens in TextEdit instead

    So I updated FCPX and libraries to 10.1. My problem is an old client just emailed me to do a new edit on a project that was using the last version of FCPX.  No problem right?  It's on a portable hard drive.  I plug it in expecting an Update prompt an