Blackberry Curve 8530 only connects to the internet using Wi-Fi

My phone will only connet to the internet when the wi-fi connection is working. I can have a full signal for text messages and calls but when i turn the wifi off, i cannot connect to the internet or use the app world.
does anyone now how to fix this or know how i need to direct the settings or to see if the settings have been reset or something?
i have an unlimited data plan through virgin mobile usa.
thanks

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2)Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile network provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Why can I only connect to the internet using my IPhone 5S 4G via a USB and not wirelessly?

    Apologies if I'm not using the right jargon ... I have a laptop (Dell Latitude D510 - Windows 7 Ultimate) that can connect to my Mobile Broadband wirelessly no problem but I can't utilise my IPhone's 4G connection (iOS 7.0.5) unless I use the USB cable (my personal hotspot is also on). I can't connect wirelessly to my personal hotspot without the USB cable. It keeps saying Windows is unable to connect to my IPhone. I have tried to troubleshoot this myself but can't find an obvious problem. Interestingly I could only connect via my USB when I downloaded the ITunes program as my computer failed to recognise my IPhone. Furthermore, I have a Dell Alienware laptop which has no problems connecting to my IPhone either way - USB or wirelessly (also has ITunes downloaded). I've searched the Internet forums for an answer on but I can't find one. Can anyone help? Thanks if you can.

    Personal Hotspot requires a password:
    http://support.apple.com/kb/HT4517

  • Macbook Air only connects to the internet for a few seconds at a time.

    My 2013 Macbook Air (10.8.5) will only connect to the internet for a few seconds. It recognizes the wifi, but will just timeout when trying to access a website. If I turn Wifi off and then back on, it will work for another few seconds, only for the same issue to come up. I've tried EVERY SINGLE troubleshooting tip I could find and nothing works. I've renewed DCHP, rebooted my Mac, rebooted the router, network diagnostics, everything. I've scanned with Sophos multiple times and nothing has been detected. My 2007 MacBook Pro works just fine on the network as well as my roommates Macbook and my Apple TV. I have no clue how to fix it and am praying someone knows what to do. Please help!

    Start by getting rid of "Sophos," which is worse than useless.
    Remove the Sophos product by following the instructions on this page, and also this one, if applicable. If you have a different version, the procedure may be different.
    Back up all data before making any changes.

  • I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    Try changing the channel in use in case you're getting interference. 
    If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
    mrtotes

  • Since downloading osx v10.7lion every time i try to connect to the internet using BT Broadband i keep getting a message saying " you cant openthe application ) because Power PC applications are no longer supported." this is very annoying as i likeBT ?????

    Since downloading osx v10.7lion every time i try to connect to the internet using BT Broadband i keep getting a message saying
    " you cant openthe application ) because Power PC applications are no longer supported." this is very annoying as i likeBT and the way it opens with all the local up to date news plus other apps +++ 
    Please can anyone help me as apple will not help unless i sign up for a new product agreement which i cannot understand as every thing worked before this so called very latest software that everyone cant do without  ?????

    I had the same problem with some apps and printer setup software. SInce Rosetta has been discontinued on Lion my only solution was to restore to 10.6 since the manufacturers either have not yet or will not release updated apps. In this case you have to determine how important those old PPC apps are to keep around and if there alternitives that are available to replace the functionality. I would expect a broadband provider to update thier apps if it is something that is required to connect.
    Mike

  • My Macbook Pro cannot connect to the internet using an ethernet cord.

    My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

    Hi bean07670,
    If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
    Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
    http://support.apple.com/kb/TS1317
    Regards,
    - Brenden

  • I have a desktop computer with xp Pro windows. I updated from Firefox 3.6 to 4.0 and found I could not connect to the internet using this updated bowser. I had to remove 4.0 and reinstall 3.6 to restore a working version of Mozilla. Why did this occur?

    I tried to update my browser from 3.6 to4.0. On restarting the computer I found I could no longer connect to the internet. I then connected to the internet using Internet Explorer and removed the mozilla browser and reinstall Mozilla firefox 4.0. Again the browser using this updated version didn't work. So reinstalled Mozilla firefox 3.6 and it worked.
    It appearsMozilla firefox 4.0 has a problem.
    My operating system is Windows XP pro.

    Uninstall 2.x totally
    Use CCleaner Registry tool
    Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
    BC 2.2 was XP and Vista only

  • Windows 8.1 laptop cannot connect to the internet using USB Mobile Broadband stick.

    I bought a new laptop and it came with Windows 8.1 installed. Well, things worked perfectly until I wanted to connect to the internet using my mobile broadband USB stick. I installed the software that came with the stick, and my laptop recognize
    the stick but I still cant connect to the internet. The stick workes perfect in my Windows 7 and Windows 8 laptops, but IT DONT CONNECT WITH MY WINDOWS 8.1 LAPTOP. What can I do to troubleshoot this???
    HOPE I AM SPECIFIC ENOUGH THOU...

    The PC Repair Guy,
    If you haven't already, verify that you can connect to the internet through some other means such as Wi-Fi or Ethernet with your laptop to rule out any network setting issues.  If you are able to connect successfully to the internet, use that opportunity
    to make sure you have
    Windows 8.1 Update installed as well as any other applicable updates your laptop may require.
    You may also want to check the
    Windows Compatibility Center to make sure that your device is compatible with Windows 8.1. 
    Another possibility is that the driver your laptop is installing for the device isn't the correct one.  Check the device manufacturer's site for the most up to date driver they have available for Windows 8.1.
    Hope this helps!
    Mike
    Windows Outreach Team – IT Pro

  • Could my ipad2 connects to the Internet using SIM card or USB Modem?

    Could my ipad2 connects to the Internet using SIM card or USB Modem?

    If you have a 3G iPad, it can connect to the internet using cellular data. As the iPad has no USB port, you can't connect a USB modem. You can use what is called a MiFi, though. They connect to cellular service and create a personal WiFi hotspot.

  • I just downloaded the latest OS upgrade and since I can not connect to the internet using my cellular data plan.

    I just downloaded the latest iOS.7 upgrade on my ipad2, and since I can not connect to the internet using my cellular data plan.  I have checked my data plan and it's both current and over 2GB remaining.  However the indicator shows no service, thus would be the best steps to recover.  Thanks much for any support that can be provided.

    Hello Kmart2@3
    Check out the troubleshooting article below to get cellular to start working again. 
    iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS4249
    Regards,
    -Norm G.

  • Anyone have issues with their ipad staying connected to the Internet using an arris-5e12 router? I seem to be getting kicked off the Internet frequently

    Anyone having trouble staying connected to the Internet using an Arris 5e12 router.?

    Are you in an area where it doesn't pick much wifi signal up. If yes try to move your device nearer to the wifi connection box

  • Why can't i connect to the internet using airport

    I can't connect to the internet using Airport. I have to use a ethernet connection.

    go to applications>utilities, and make sure your wireless is showing up in the left colum. If you see it there follow the promps to set it up

  • After a recent comcast / xfinity update I have been unable to even connect to the internet using firefox. I can using internet explorer.

    After a recent comcast / xfinity update I have been unable to even connect to the internet using firefox. I can using internet explorer.

    Take each of the following steps that you haven't already tried, until the problem is resolved.
    Step 1
    Restart the router. Many problems are solved that way.
    Step 2
    Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
    Step 3
    Run the Network Diagnostics assistant.
    Step 4
    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
    Step 5
    You may need to change other settings on the router. See the guidelines linked below:
    Recommended settings for Wi-Fi routers and access points
    Potential sources of interference
    Step 6
    Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
    Step 7
    Reset the System Management Controller (SMC).

  • Unable to Connect to the internet using airport extrteme

    I am unable to connect to the internet using airport extreme It was working fine with my G3 & G4 iBooks but now I am unable to connect. I am able to connect directly to my Desktop connecting directly using ethernet. I am also receiving a strong signal from the airport base station. Please help. Thank you.

    Try the following, in order, until resolved:
    1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
    2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
    3. Perform a complete power recycle of your network components as follows:
    Modem/Router Power Recycling - Quick
    o Power-off the modem, AirPort Extreme Base Station (AEBS), & computer(s); Wait at least 5 minutes.
    o Power-on the modem; Wait at least 5 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
    Modem/Router Power ReCycling - Full
    o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    o Power-on the modem; Wait at least 15 minutes.
    o Power-on the AEBS; Wait at least 5 minutes.
    o Power-on the computer(s)
    4. Contact your ISP to have them perform a "modem reset."

  • I cannot connect to the internet using apps but im connected to the internet!

    i cannot connect to the internet using apps but im connected to the internet!

    What makes you think that you are connected to the internet then?
    Try:
    - Resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset ntwork settings: Settings>General>Reset>Reset Ntwork Settings.
    - iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Maybe you are looking for

  • Motion blur issue once exported to DVD through Encore

    I have 59.94 HD footage. I edit it, export it through Adobe Media Encoder to Mpeg-2 DVD at 29.97, drop-frame, lower field dominance. I then import that .m2v file into Encore, and then export to DVD, without re-transcoding or encoding anything. The DV

  • 6500 Slide Limitations on Message Recepients

    Hello, I had used N72 and then shifted to 6500 Slide recently. What annoys me is there is a limitation of 20 receipients for a text message. Even if my mailer group is more than 20 it accepts only 20 recepients. My software is 4.84 and i am facing Ha

  • Fpga: Communicat​ing between fpga and third party program running on pc

    I am using a C-Rio to control a planar robotic joystick. The goal is to use the joystick as a force feedback controller for a computer game running on a pc. My program as is for now runs a program on the fpga to read the encoder values and run the pw

  • Activate Airport on Disconnecting from Ethernet

    Hey, I have a computer I use as a server, so I have it by default plugged into the Ethernet, with Airport Off (so that it uses the ethernet network). But I need to remote into it from off the network, and if it gets accidently unplugged, airport will

  • Hasmap.put,get infinite loop, 27.6 optimizer problem

    Helo, We have a very busy (3000 users) Weblogic Portal and Weblogic Integration instance. We found that some times (once a week) weblogic server threads go to infinite loop doing hasmap.get, hashmap put or hashmap remove operations. Our developers fo