Blackberry Curve 8530 track pad only works on the main screen

I have a blackberry curve 8530 and the track pad will only work on the main screen.  I have removed the battery and let it sit for 2 minutes before re-installing it again, the track pad started working but only for about 30 seconds and it back to the same thing.
Any suggestion? 
Thanks You

Suggest that you get your handset serviced by an expert this will solve your problem..

Similar Messages

  • Blackberry Curve 8530 - Track Pad is Frozen!

    I went to check my phone last night and I couldnt get it to turn on. The only way is to take the battery out and put it back in. Then the home screen pops up with Unlock, Emergency and Cancel screen like normal (because I have a password) but then the track pad and none of the bottons work so im stuck on that page with no way to get out.
    I've tried plugging it in to the charger and i've tried pugging it in to my desktop manager but seems to work?!
    Would anyone have a solution for this? Or is there a phone number i could call to get someone to help me fix this??

    Hello mewool27,
    Have you tried reinserting your battery?
    If so, try reloading your device software using one of the methods listed in the following article:
    http://www.blackberry.com/btsc/KB03901
    If it still fails to resolve the issue you may need to contact your point of sale for options.
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Does anyone know how to stop my I Pad from going to the main screen when I'm using it ?

    Every time I use my I pad on any screen it jumps back to the main screen any ideas

    I'm not sure if this will do it, but try a rest. Hold down the sleep and home buttons at the same time for about 15 seconds until the Apple appears.
    Hope this helps.

  • Help please :( Curve 9300 track pad stopped working!

    Hello,
    I have a curve 9300 and the track pad has stopped working it lets me move around fine but when i click to open things nothing happends its just stopped working ive only had  the handset  around a month im wondering is there anyway to resolve the problem and get it working again or do i need to send it some where to get fixed?

    Hi and welcome to the forums Lotte !
    A couple of places for you to visit: Blackberry 101    Tips & Tricks
    Pull the battery out with the device ON. Wait about a minute and put the battery back in. Let the BB completely restart and see if that doesn't help. Clears out the memory and refreshes the BB; like rebooting your pc. 
    When you have anomalous behavior in your BB a battery pull often helps to clear it up too.
    Let us know ow it goes..Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • Track pad only works when really close to iMac

    Hi guy,
    After lending my mouse to a friend, I needed to use my track pad again for my iMac. However, I found out that the track pad will not connect to my iMac. After messing around with it I realized that the track pad will only connect and pair with my iMac when I place my track pad so close to iMac that its pretty much touching it. I wonder if it is something wrong with the bluetooth hardware inside my iMac? I tried some solutions that I found online but they do not seem to work.

    Hello nismobrothers,
    The following article contains a number of things that may be helpful in getting you Bluetooth hardware working as expected (if they've not already been attempted).
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/TS3048
    Cheers,
    Allen

  • Curve 8530 track pad

    I have had my 8530 since February of this year and the track pad is peeling.  I don't have long fingernails so I was wondering if anyone else had that problem?  I called Verizon and was told this issue may not be under warranty and I might have to pay to have the track pad replaced.  Does anyone know how much it would cost to replace the track pad or should I just bail and get the droid? I really like the purple color though....sigh

    I have a 9650 through Verizon with the same problem.  My phone was new in July.  I called them and reported the problem yesterday.  They are sending a refurbished phone as a warranty replacement of the original.

  • My Mac only works on the mains

    Hello,
    i have a problem my macbook only works when it's connected to the mains. when i click on the battery icon it says battery is not charging and when i push the button on the battery i get five green lights.
    in the system profiler it says:
    Charge Information:
    Charge remaining (mAh): 0
    Fully charged: Yes
    Charging: No
    Full charge capacity (mAh): 0
    Health Information:
    Cycle count: 198
    Condition: Check Battery
    Battery Installed: Yes
    Amperage (mA): -1
    Voltage (mV): 10423
    Do i need to replace the battery or is there something wrong with my setup. Need help can't live with my mac on mains power when i'm using it.
    would be gratefully for any help?
    Thanks

    I also have this problem - as of about half an hour ago, only my battery info is as follows:
    +Battery Information:+
    +Model Information:+
    +Serial Number: DP-ASMB013-34e1-2d5f+
    +Manufacturer: DP+
    +Device name: ASMB013+
    +Pack Lot Code: 0001+
    +PCB Lot Code: 0000+
    +Firmware Version: 0102+
    +Hardware Revision: 0300+
    +Cell Revision: 0200+
    +Charge Information:+
    +Charge remaining (mAh): 5169+
    +Fully charged: Yes+
    +Charging: No+
    +Full charge capacity (mAh): 5286+
    +Health Information:+
    +Cycle count: 399+
    +Condition: Good+
    +Battery Installed: Yes+
    +Amperage (mA): 0+
    +Voltage (mV): 12499+
    I intend to try a few things like resetting PRAM and PMU and I'll post back with results soon.

  • Blackberry curve 8530 key pad problemWhy my bb curve keypad don't move when i go to the menu section?

    why my bb curve keypad don't move when i go to the menu section, please help me if this ever occur to yours, and what you did to fix it?

    Hi andersonbx,
    Welcome to BlackBerry Support Community Forums.
    Try backing up your device via the BlackBerry Desktop Software and performing a clean reload of your device software. http://bbry.lv/bpv7DT Make sure to test for the menu issue before restoring any data from your backup file. If this doesn't resolve the issue, you may want to contact your wireless provider for other options.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Help! Blackberry Curve 8530 won't go to Home screen only stays at carrier screen!

    The other day I updated my Quick Pull app. I forgot to reset the times in which i wanted it to reboot. Last night I remembered and set the time. I normally set it for 3, but since it was 3 it wouldn't be able to reboot until this evening. After I was done with my phone, I rebooted it manually by going to the app and clicking reboot. My battery was also low in the red so I stuck the charger in it. When I woke up this morning my phone was dead, if had fell on the floor and the charger came out. I put the charger back in a waited a little while for it to charge. When it came on, it only went to the Cricket screen, but would not go to the home screen. I took the battery out multiple times, I waited patiently, yet my phone is still stuck on the cricket screen.. Is there anyway to reset it so that it can work again? 

    Please try this first:
    Leave the device to charge 2-3 hours, and then, still connected to the charging cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Help blackberry curve 8530

    my blackberry curve 8530 is only a few months old, has been replaced already due to defect and now again this one is defective..... not happy with this at all.......ive already had to call tech support due to phone freeze, now i cant send pic messages, facebook is working, not recieving all calls and sms... what is the deal?

    ACunderwood wrote:
    my blackberry curve 8530 is only a few months old, has been replaced already due to defect and now again this one is defective..... not happy with this at all.......ive already had to call tech support due to phone freeze, now i cant send pic messages, facebook is working, not recieving all calls and sms... what is the deal?
    A soft reset may resolve the issues outlined on your post. To perform a soft reset on your phone please follow the instructions below:
    Remove battery with phone ON. Replace battery after 10 seconds. Power phone ON. Allow phone to complete the applications registration.
    Please keep in mind that Smartphones are like computers and from time to time they will stop responding due to multiple factors including the amount of applications running at the same time, the amount of media saved and the amount of memory available, and just like our computers need to be rebooted, our phones need to be rebooted from time to time.

  • BLACKBERRY CURVE 8530,, help me ASAP.. P L E A S E

    So I had this blackberry curve 8530 for about a week already. I like this device, but it does not let me send or receive picture messages. I need help ASAP...  P L E A S E

    Hi and Welcome to the Community!
    Picture Messaging (technically, MultiMedia Messaging Service -- MMS) is a function of your contract with your mobile service provider (Sprint). You must subscribe, from them, to a plan level that is adequate to include MMS (and any other services you desire). As such, discussing this with them would be the best approach. See this for general guidance:
    http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
    Again, that is only general -- with hundreds of carriers in the world each with dozens of different data plans, only they can answer specifically about what should and what should not work.
    If they tell you that you are subscribed to an adequate data plan, then don't let them fob you off. After all, you pay them for 100% of your services and 100% of your formal support...you should insist that they deliver both.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Curve 9300 Tracker Pad problems

    Hi, 
    For some months now ive been experiencing problems with my curve 9300 tracker pad. It freezes and wont scroll. I have to restart my phone countless times before. i always ger an error which reads 'Uncaught exception: java.lang.Error".... Can i have a permanent solution as its getting frustrating?

    Hello BiancaBriandt,
    Welcome to the Community
    Seems your handheld is getting hanged that is why your trackpad stucks ferquently. Please try by deleting 3rd party apps using below mentioned procedure...
    Menu (Blackberry Sign) from home screen > select maximise panel > Option > Security > Security Wipe > Select Only 3rd party app > Type blackberry in given space and click on wipe.
    Hope this may help you to come out of this...........
    Good luck

  • Blackberry curve 8530 wont accept password

    I have had a blackberry curve 8530 since march and it is now july! Everything has worked until now when i tried to install the desktop manager and it wouldnt accept my password. I tried 10 times and now it says "last attempt" and i don't want my phone to reset everything! Pleas help me!!!! I don't know what to do!!! (P.s i haven't backed up my phone!)

    Hi 85curve30,
    If you have any numbers in your device password and don't hold in the Alt key when entering them on the device, try entering the corresponding letters on those keys on the PC when it asks for the password for your connection to the Desktop Software.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Blackberry Curve 8530 Stuck on White Screen

    Hello there,
    I need help!
    My Blackberry Curve 8530 is stuck on a white screen with battery image in the middle of the screen with a red line accross it. The BB was  working fine, but for some reason froze up, and it wouldn't respond to anything, so I took the battery out and put it back in and since then the phone is stuck on the white screen with the ddescription described above.
    Just to let you know I have dwonloaded the sofware and installation loader from my carrier. I connected my BB to my PC via USB cable- the PC rocognized the device at first and istalled the drivers, but when I run the application loader it says that the BB is not connected and I have the option to connected and retry it---I did, I disconnected the USB and re-connected, tried it again, but I keep geeting the same thing. Not sure what to do next-
    Can someone help me with this issue?
    I appreciate any help in advance.
    Thanks!

    Hi thesanto,
    Try the instructions in the below article.
    http://www.blackberry.com/btsc/KB10144
    Thanks,
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Blackberry Curve 8530 text issues, please help!

    I have a problem opening some texts on my blackberry curve 8530, most of the texts i get are threaded and i can read them fine. When I get texts from certain people and i open it, its just black and i cannot see any text so I have to forward the text to my phone to see what the person has texted me.  Then i have to delete the text i forwarded to myself otherwise it wont work the next time i send another fwd text to myself to see what they said. It happens consistently with the same people in my contact list.  Most people are fine, but theres a few people i text that this happens with and it happens every time they text me. Ive looked through settings and I have no idea how to fix this or how to change it. Its getting really old to have to fwd the texts people send me back to my phone to read them every time they text  me. Can anybody please help me????? It would be much appreciated.  Please please help me with this or explain to me whats going on with it.  I have no other problems with my phone other than my screen freezing up every once in a while.
    Thanks so much!
    Diana

    Diana, the first thing I would suggest before doing something more invasive like a device wipe and restore is a simple reboot:  With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
    See if the issue perists.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • ALV {oop} column Hide at runtime

    Hi, I have a ALV report using OOp. In the report application toolbar i have 2 buttons (PF-Status) If user click on button1 one of the column to be hide from display. But if click button2 then that column to be unhide and display. I have tried this us

  • UMI "V" LED off when power is applied

     Hello all, Has anyone seen the "V" LED go off after a successful power-up of a UMI-7744? We power our encoders from the UMI so we lose feedback when this failure occurs. Both "Viso" and "V" are powered from the same supply at 24v. The "V" LED goes o

  • S.M.A.R.T. verification for HD in lower slot B

    My CTO PM G5 (Dual 2.5 GHz - RevB) came with the 250gig HD in upper slot A. In this location the Disk Utility reported it was SMART Verified. Subsequently I've moved it to the lower HD slot B and now Disk Utility reports it's not SMART Verified. What

  • Install fails on RHEL4 64 bit

    Can somebody have an idea why the Oracle installer fail on my RHEL4/64 bit? The installer fail with: "Error in invoking target 'install' of makefile'... See log for details. and this is the log: ...INFO: gcc -m32 -o ctxhx -L/opt/oracle/app/oracle/ora

  • Error in copy of function module  FIEB_PASSWORD_ENCRYPT as a Z FM

    Hi Gurus, I want to make a copy of function module  FIEB_PASSWORD_ENCRYPT as a Z FM. but after coping standard FM when i am trying to activete it ,it is showing one error *form decrypt_password does not exist.* if possible give me the solution step b