BlackBerry Curve 9380 will not power ON and the red LED light is flashing

I need you guy's help. I was charging my BlackBerry Curve 9380 this morning. When I was about to use it the found out that the screen will not light up but the red led indicator is blinking one long blink, one ong blink then a full stop. I have already tried removing the battery and sim card for sometime but to no avail. What should I do?!

You need to consider updating/reinstalling device OS. Check the below knowledge base article -
KB03621 How to clean reload BlackBerry Device software and applications using BlackBerry Desktop Software
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • The charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

    the charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

    Could be bad ram or logic board. Take it to an Apple store or AASP.

  • Blackberry Curve 8900 will not power on

    Hello!
    Earlier today I left my curve out in my car by accident for about a 1/2 hr.  When I got back into my car, I checked the phone like normal and it wouldn't power on.  I've done a battery pull a couple of times and have had it plugged into the USB port on the back of my computer for the past 2 hours and it won't work.
    When I first plug it in, or do a battery pull the red LED light stays lit for about 10 seconds then the screen just stays black and the LED light is not on either.  I've tried to also hold down the power button to see if it comes back on.
    I have a wall charger at home I can try when I get home, but any other suggestions if that doesn't work?

    Pull the battery and reinsert.  Give it a few minutes just as you would if it was powering up normally.  After you give it 4 or 5 minutes, try calling it.  Does it ring?  My first assumption would be that the display overheated and no longer works.  When you plug it into the computer does the computer see it and make the sound that it's connected?
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • My 4th generation ipod touch will not power off and the volume buttons do not work, any suggestions?

    My ipod's power off and volume buttons are not working. It's as if the volume down button is constantly being pressed. Both buttons "work" as far as I can press them in, but there is no response from the ipod. Any suggestions? I have updated the software, but that did not help.
    Thank you!

    I have the exact same problem!!
    please let me know if you have found a fix / soution
    email me at [email protected] or just reply, any help would be great
    thanks.

  • My Blackberry Curve 8520 will not let me read my bbm.

    My Blackberry Curve 8520 will not let me read my bb messages. how do I fix this? Why on earth does blackberry not have a number I can call rather than this stupid thing!!

    CoryH wrote:
    What is your:
    OS Version (Options > About)
    BBM Version (Options > Applications > Change drop down to Add Ons > Scroll to BBM)
    At what point does it stop you from reading your messages? Will the application launch but you are not able to pull up any conversations?
    I am not one of those trained people, I'm a user like everybody else but I've gained a lot of technical knowledge through use and research. Sorry to disappoint.
    Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

  • My iPod touch will not power up and is not recognized by my comptuer anymore

    Good afternoon, my ipod touch (4th Gen) will not power up and is not recognized by my computer anymore. I have attempted to restore but that did not work. I have also charged for several hours. Any suggestions? Thanks!

    I have already tried that as well and unfortunately it did not work.

  • IPod Touch will not power up and will not respond to itunes when plugged into a computer

    iPod Touch will not power up and will not respond to itunes when plugged to computer, have tried holding both buttons down for 10 secs like support suggest but nothing has happen. Any suggestions?

    Try the other actions here:
    iOS: Not responding or does not turn on

  • HT1750 I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    I tried to change the memory and now my Imac will not power on. and there are no beeps. what did I do wrong?

    Don't know.  Could be any number of reasons.  Re-read the how to install RAM manual again for your model iMac.  Double & triple check to make sure you purchased the right RAM chips.   Make sure they are seated properly.  If you didn't hear a snap when seated, the RAM is not properly seated. 

  • Will not power on and power cord flashes green and orange

    Powered on fine with green light on power cord and then the screen went black and now it will not power on and power cord flashes green and orange

         Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • My bb curve 9380 shutdown and a red led lighting

     my bb curve 9380 shutdown and a red led lighting i don't now what hapned but i just modify some apps bay bb desktop softwere please help me and thx verry much

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    If the problem is revealed via the above tests to be your BB, then I recommend that you attempt to boot into Safe Mode:
    KB17877 How to start a BlackBerry smartphone in Safe Mode
    It may take you multiple attempts to get the ESC key sequence (press/release/hold) correct, so be patient. When successfully into Safe Mode, see what happens.
    If the behavior ceases, then think carefully...what happened just before this behavior started? A new app? An update? A Theme? Something else? Think carefully as the smallest change could be causal...and attempt to undo whatever that was.
    But if the behavior continues in Safe Mode, then you may need to consider more drastic actions -- WIPE, OS Reload, BBSAK Wipe/Reload, and the "Bare Bones" OS Reload Process. To prepare, you should be sure that you have a full backup to your PC...please review the Backup link in my auto-sig on this post for instructions.
    You may also need the use of these tricks:
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB27956 How to recover a BlackBerry smartphone from any state
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

    Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

    Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

  • My vintage Power Mac will not power on.  The power on button lights up, but dims after releasing the button.  What is the problem?

    My vintage Power Mac will not power on.  The power on button glows bright when pressed, but dims to off after releasing the button.  What is the problem?

    The battery is the PRAM battery:
    Your Mac stores certain settings in a special memory area even if it is turned off (unless there is a battery issue as described below).  On Intel-based Macs, this is stored in memory known as NVRAM; on PowerPC-based Macs, this is stored in memory known as PRAM. Information stored in NVRAM or PRAM may include:
    Speaker volume
    Screen resolution
    Startup disk selection
    You may need to reset the NVRAM or PRAM if you experience issues related to these functions. For example, if your Mac starts up from a startup disk other than the one you've specified in Startup Disk preferences, or if a "question mark" icon appears briefly when your Mac starts up, resetting NVRAM or PRAM may help.
    http://support.apple.com/kb/HT1895#
    Replace the battery and reset the PRAM.
    Resetting your Mac's PRAM and NVRAM - Support - Apple
    Can I purchase a replacement battery at Walmart?
    Likely not.
    Order one at OWC for the best price ($20+ at Radio Shack):
    NewerTech 3.6VPRAM 3.6v Lithium 1/2 AA PRAM... in stock at OWC
    But have not sure what a PSU is or how to test it.
    PSU- Power Supply Unit.
    Then the steps that I deswcribed may be a bit advanced for you?
    The PSU is the gray box at the top rear of the interior, the box to which the power cord is attached and has the fan blowing hot air out.

  • My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

    My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • My Ipod touch will not start up and the menu will stay in I tunes!

    My ipod touch will not start up and the menu will stay on menu of Itunes. Who can help me?

    Hi,
    Have you tried a hard reset of your iPod?  Press/hold the home and sleep/wake buttons down until the Apple logo appears. 
    Hope this helps! 
    ---likeabird---

  • BlackBerry Z3 does not Boot, red LED Light is flashing 1x long and after 6x short

    After updating my Blackbery Z3 to 10.3.1.1779, my device won't boot and  red LED Light is flashing 1x long and after 6x short. Need help to solve the issue. Thanks in advance.

    Thank you for your update.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • IDM Instalation isse

    iam getting the errros when iam configuring the IDM, i have done the following steps: 1) Database installation 2) RCU (Schema creation) 3) Weblogic server 4) install IDM 5) Configure IDM(Here iam facing issues) The error is: Error creating ASInstance

  • Difference between New G/L Segment and Profitability Segment

    Dear friends, Can somebody explain what is the difference between New G/L segment and Profitability segment. Thanks, Prakash

  • Try this in DTW (oStockTransfer) -- No data is visible

    Hi Experts, I have a problem, I want to use the DTW to import the Inventory Transfers so i have to use the oStockTransfer template provided by SAP, I have put some data in the Header and lines templates, Now when i check the source data and target da

  • Deactivate Adobe Web Premium CS3

    I installed Adobe Web Premium CS3 on a new notebook and I tried activating the software. It failed due to a previous activation. I no longer have the previous notebook. How can I deactivate/activate on the new notebook? Thanks. Rudy

  • Copy e-mail to paste in Memo

    I get e-mails that span over 2 or more screens. When I highlight the first screen and use the scroll bar to get to the second screen, I lose the first screen's highlight. I don't find a 'Select All' option. What's the secret to highlighting all of an