Blackberry Curve and Microsoft Exchange

I'm not sure if I'm in the correct forum or not, but I have a question about Blackberry and Microsoft Exchange.
Do I need a Blackberry Server in order to synchronize to my MS Exchange Server?  I know I can get my email to synchronize using Outlook Web Access, but this doesn't help with my calendar.  
Any suggestions?
Thanks in advance,
Ray

A BES would get the job done, but you could also use the desktop manager and just sync it over the wire. Also might want to look into the microsoft redirector
If someone helped you give them kudos. Research all info!

Similar Messages

  • Help Please Blackberry Z10 and Microsoft Exchange

    Hi I have been a happy BB user for many years and was happily using a BB torch on Vodafone for last 3 years. Several mail boxes set up on phone, usual hotmail , gmail as well as office mail boxes via Microsoft exhange. Have never used BES
    Upgraded to a Z10 and spent 3 long frustrating days trying to get the phone to talk to my SBS 2011/ Exchange 2010 
    Active Sync didn't work and every other attempt failed. We actually had a Microsoft engineer on site who also failed, yet connected his iphone in about 20 seconds
    After many lengthy telephoe cnversations with Vodafone, their second tier technical support told me that there is a software issue and it is not possible to send and receive email for exchange mailboxes on the Z10 without BES software. I was told that this was a known issue and there would be a fix within a month. That was 2 weeks after the Z10 was launched, it's now nearly June and there still seems to be no fix in sight.
    Does anyone out there know anything about this ? Is it a network specific issue with Vodafone ?
    I returned the phone as it was useless if i couldn't work with my office email and went back to my trusted Torch - it is no falling apart and I need to upgrade to something very soon - getting very close to moving to a Galaxy.. Help.....

    Mrhappyperson wrote:
    Vodafone have been very specific that it is not possible to configure the Z10 to work in conjunction with an exchange server without runnig BES, which we don't. 
    The statement, made that simply, is definitely not accurate. Exchange can face OWA to the Internet, and ActiveSync can be activated within OWA, with which a Z10 (generically speaking) can indeed integrate to. But, you've still not revealed what you face to the Internet, so it's only possible to talk generically for your situation...not specifically.
    As the other contributor stated, they have BB10 OS 10.1, which seems to have in their case broken this particular function. You've not stated your BB10 OS level, so all we can work from is the generic information...which is indeed that it does work (generically speaking). If you also have updated to BB10 OS 10.1 and this issue might be the same for you, but here too lacking your details makes it impossible to know for sure.
    Nevertheless, Vodafone is your formal support entity...and I would defer to what they are telling you, especially since you have revealed to them the specifics that you continue to hold back here.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Oracle alerts and microsoft exchange server

    Hi,
    We are working on Oracle Applications 11i (fail over on 2 servers) which is installed on Solaris 64 bit .
    AND I am trying to configure Oracle Alerts with Microsoft Exchange Server.
    I am following the note: Oracle Applications And Microsoft Exchange Server-Interoperability Guide.
    At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
    How can i check that?
    Thanks.

    Hi,
    At the step of configuring the exchange Server I need to know the account used to run the Concurrent Manager service.
    How can i check that?Most probably it is applmgr user.
    To verify, issue "cd $COMMON_TOP/admin/scripts/<CONTEXT_NAME>", then "ls -l adcmctl.sh". This should should the OS owner of the script (the OS user which is used to start the CM). Or, you could check the value of the "s_appsuser" context variable in the application context file to determine the user.
    Regards,
    Hussein

  • I have a BlackBerry and Microsoft Exchange Server.  How will I sync with my new iPad?

    I have a BlackBerry that is supported by a Microsoft Exchange Server so I can sync my BlackBerry and my laptop which is a PC.  How do I sync my Outlook info with my new iPad2 so all of my devices are connected?  Thank you.

    The setup , as was mentioned, is basically the same as a Wimndows Mobile device.  You need mail server name, your domain login and credentials  You will also need to check you wi-fi connection and be sure you can get rhough whatever enterprise proxy servers you might have. If you have 3g I would use that and not mess around with a proxied network, if that is an issue for you.
    One additional caveat....adding another mobile device significantly increases the complexity of your mail delivery system.  There are articles on the Microsoft kbase that talk about Outlook calendaring best practices.  Watch for calendar consistency issues.  You might consider running Outlook in online rather than cached mode, or at the minimum deleting and rebuilding your cache file. 

  • Q10 and Microsoft Exchange Server

    Please help!
    I got the Q10 back in May. The IT at my work is not going to upgrade the server to support the BES10 and has no plans on doing so in the near future. All I am told is they will not support the Q10 or Z10 models. So I had to reactivate my bold 9900 after a few days and the Q10 is gathering dust on a shelf.
    However, we do have external access to our email account through microsoft exchange and I know my colleagues with iphones have an application that allows them to sychronize with their work accounts via the exchange. Does the Q10 have anything similar or is anything in development? If not, I may have to sell the Q10 and move on as my 9900 is kaput.
    Many thanks in advance for any help!!

    Hi jlkb78 and welcome to the BlackBerry Support Community Forums!
    If Microsoft ActiveSync is available on the Exchange server, you can add your email to your BlackBerry Q10!  From Settings>Accounts, click on Add Account then click on the Advanced button at the bottom of the screen then choose ActiveSync.  Enter the information to add the email account!
    Let me know if that helps.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • MAJOR PROBLEMS WITH IPHONE 3G AND MICROSOFT EXCHANGE!!!! PLEASE HELP!!!!

    Ok,
    My exchange server at work was synced to my iphone and has worked with no issues. I then exchanged my phone because there were issues with my bluetooth not syncing properly. So with this new phone, it prompts me to enter in my exchange server password every few days. I contacted my IT department as well and microsoft to get this issue resolved because I assume that there were issues with the exchange server. They were both able to see an event viewer and it showed that my iphone was attempting to log in numerous amounts of times, which locks out my account after 3 incorrect log ins. Even when I erased the exchange account from my phone, it still showed that the phone in the event viewer was trying to log in over and over again. I then did a master clear and restore and the process was removed in the event viewer. So then I called my IT department to unlock my account after I cleared everything. I was able to sync everything again with it working properly. Now its a day later and the my exchanger server prompts me to enter in the password AGAIN and my exchange account is locked AGAIN because the event viewer at work is showing the same issues. Is my Iphone not saving the password correctly? What do I do? My IT department even created a dummy account to see if a new account would fix the issues but yet no cigar! HELP!!

    The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
    Message was edited by: ethanm

  • Problems with Yosemite and Microsoft Exchange?

    Hi, everyone, I upgraded all of my computers I work on to Yosemite (home and work); my iPhone and iPad both run IOS 8.1.  I have 2 Gmail accounts that I use regularly; my job (university) is using Microsoft Exchange for the mail server.  I use MacMail; don't really like Outlook for mail things.
    I have periodically had some problems with pulling my job e-mail up on MacMail; since I converted to Yosemite, it has gone on steroids.  I can see all of my Gmail just fine (contrary to some others who have reported problems); anything that is Exchange-based mail on my job's e-mail account will show the sender and the subject—the message itself is blank, sometimes for minutes sometimes forever.  I have quit and restarted Mail, quit and restarted the computer to varying success, but it is still highly unpredictable other than not showing the message for a very long time.
    When I use the web-based version of Outlook, it instantly shows everything.  An A-B comparison of Outlook and Mail sometimes even has some messages not having even been downloaded into Mail, even though I have clicked on Get Mail.
    And—in the iPhone and iPad, everything is fine 100% of the time.  Works wonderfully.
    Any ideas?

    Try rebuilding the mailbox. This can take awhile if you have a lot of mail.
    Rebuild mailbox

  • Battery drain with 2 Push accounts Mobile Me and Microsoft exchange:

    One might ask why I need two. Well, I started with a Microsoft Exchange account,, and now am trying Mobile Me. For now they are both being pushed to me. Do I get extra drain from having 2 accounts? I wonder if I get twice the drainage with 2 instead of 1 account. I had done a restore from backup when I got my new 3GS,, and didn't notice too much drain, but thought I could do better, so I restored a fresh 3.0 firmware, without a backup,, funny thing is, that I thought I would enhance battery life. So far, it seems worse than my restore from backup . All that work, with little improvement to show for it

    You are going to get more battery drain with the 2 push accounts. Try removing the Exchange account for one day and see what happens to the battery life.

  • OSX 10.5.8 and Microsoft Exchange 2010

    Hello
    Is it possible to get Entourage on Mac OSX 10.5.8 to work with A microsoft exchange 2010 server? I know it will work if we upgrade to Snow Leopard but some of our staff still have power pc macs and therefore can't use Snow Leopard.
    Thanks
    Gary

    There is no reason why it should not work, it worked with exchange 2003 and 2007.

  • 2 way sync with my Blackberry Curve and Hotmail

    Is it the case that with a free hotmail account I can not have 2 way sync with my Blackberry Curve. What if I upgrade to a subscription Hotmail account? Or is it just not possible?

    Its not possible with Hotmail.
    Here is a comparison chart of the various services:
    http://www.blackberry.com/btsc/KB05133
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Software update TIGER 10.4.4 and Microsoft Exchange

    This weekend I have updated to Tiger 10.4.4. (ran the software update) and today returning to the office, the microsoft exchange account stays dead. I can send mail but not receive.
    The strange thing is there are no errors mentioned, the messages just don't show. When I check through webmail, there are messages, also the one's I mail to myself as test.
    Any suggestions?
    Dries

    I hope that you have a backup?
    My powerbook had the same problems after the update.
    endless loop of logging in etc, password not recognised, filevault master password was never activated but the mac wanted it?
    I had to do a complete system install and then I used use my backup.
    I would suggest that you try the archive and install option from your install disk.
    You could be more fortuante than myself and get back to where you were before the update.
    I booted several times with my system dvd and did disk repair and permissions and everything checked OK but still could not get past login when running from the intern drive.
    The good news is that after getting things reinstalled with system 10.4 I then did the software update again and now its running perfectly with 10.4.4.
    regards
    john
    powerbook 15" 1.5ghz   Mac OS X (10.4.3)   very happy

  • Blackberry Curve and Facebook issues

    I'm sure I'm not the only one...but I've finally decided to come here to see if anyone has an answer or solution to this problem.
    I will post something via computer to my facebook page and then when I'm away from my computer I might get a response to a posting. I will then use my blackberry curve to send a response.  Most of the time it works just fine...but there are times (these are the ones I'm trying to figure what's going on and what the solution is) where the response I send goes through just fine but once it hits facebook two issues happen:
    1.   This appears on my message on Facebook Ô  when this happens it splits up the message into two seperate messages. I only see this on line.
    2.  when I view my Facebook page on my phone I get this message "Error encounterd during XML parse: Invalid character '&#x5' encountered. This pertty much prevents me from going any further down that particular posting on Facebook when looking on my phone.
    What do I need to do to resolve this issue?  Any suggestions would be most appreciated.

    Hi Moun10dew,
    Welcome to BlackBerry Support Community Forums.
    Are you using the Facebook for BlackBerry application or browsing to the mobile site to access Facebook? This article should provide more information on the error message you are seeing. http://bit.ly/et2T8j
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Iphone and Microsoft Exchange server 2007.

    We as a corporate company have many iphone users, and the iphone users are configured with our corporate microsoft exchange 2007 server.  So the users use their iphones to check their corporate emails which is on microsoft exchange 2007.   So they have setup a connection on their iphones to the company exchange server.
    The issue we have is that the iphone users have issues with sending out email via the exchange email accounts on their iphones, when they send large emails, or emails with a long chains, When they send these emails the emails gets stuck in the outbox, and does not send out.  The users then have to delete the content in the email, or make the email less in size and then it sends OK.
    We have checked our exchange server and the settings seem ok, and we have contacted microsoft, and they have done some tests with a windows mobile emulator which acts like a mobile device, and there are no issues with sending email their.  So they have asked me to contact Apple about any issues.
    So has anyone come across this issue.  Any suggestions.

    Try this:
    1. On your Exchange server that runs your active sync or outlook web access, open IIS
    2. Right click on the website that contains exchange components and choose properties.
    3. Select the "Directory Security" tab
    4. Under "Secure Communications", click the "Edit" button
    5. Under "Client Certificates", select "Ignore Client Certificates"
    6. *IMPORTANT STEP: When you click ok and ok again, it may ask you whether you want to change other subfolders within the main container with the modifications you have just made, dont select any of these subfolders, just click OK. It is only the main properties you need to change. Those that need to inherit, should already inherit properly. If you select other subfolders to change with the modifications you have just made, it will likely ruin your active directory setup as some subfolders need different security settings to others.

  • HTML email and Microsoft Exchange

    When I setup a Microsoft exchange account (server = m.hotmail.com), the email shows as text, not as HTML (as it should).
    The same email shows correctly as HTML when I setup a Hotmail email account.
    Is there a fix to this yet?
    Post relates to: HP TouchPad (WiFi)

    I tried using the POP3 but It will not send emails using this configuration. However, I receive emails perfectly. Or I got a wrong configuration....
    Incoming POP server
    pop3.live.com
    Incoming POP mail port
    995
    Outgoing SMTP server
    smtp.live.com
    Outgoing SMTP port (primary)
    25
    I have tried the outgoing with 587 and SSL, TLS and same results. It shows error saying that I can receive but will not be able to send.
    In the meantime, I deleted and using the m.hotmail.com configuration but hate to see the text. This is wifi!!! should be HTML.

  • Ios5 and microsoft  exchange 2003 email accounts

    Hi just wondering if anyone out there has actually found a solution to a problem that I and a few other people are encountering with syncing a microsoft exchange account with iphone.  After putting all the necessary details into the settings in the iphone I simply get a message "unable to verify account information"  I've played around with domain names and server names but no luck.  Anyone had this problem and solved it?

    if everything is correct try rebooting the iphone by holding the power/home key at the same time for 10 to 15 seconds or until you see the apple logo and then release.
    I'm using work exchange account and having no problem receiving/sending emails.

Maybe you are looking for

  • Problem with flow of expandable fields

    Hi everyone, I have important problem with flow of expandable fields in table in dynamic PDF form. The issue I am talking about you can see at the top of column 3 on page 2 in PDF in link below. Here is uploaded PDF form and sample XML data (form has

  • Help with SQL Query and dates

    I am trying to return results between a year or 365 days. I need to run this at any time and return a year prior. I'm not getting any results? Any help? THX! SELECT NAME.ID, Activity.UF_2, Name.FIRST_NAME, Name.LAST_NAME, Name.EMAIL, Activity.TRANSAC

  • Sales Order stock E not displayed in Plant stock view MM03

    Hello Experts, I am wondering if it is normal that the sales order stock level (type E) owned by the plant of a material is not displayed in the MM03 view plant stock of the same material. Is it a standard behaviour? Could you please explain why? Tha

  • Forgot password on ipod

    How do I remove a forgotten password on my nipod?

  • How to convert HD 29,97fps to 25fps DVD??

    Hey, I need to edit material from 2 different sources. A) HD 29,97fps B) HD 25fps In the end I will have to create a PAL-DVD (and maybe also a Bluray). So what is the best way to edit them together without getting the ntsc-material to stutter because