Blackberry Curve HELP with 2 things.....sending pics via text and calls/SERVICE PROVIDER IS SPRINT
Can it be done? I am having a hard time figuring that out. Can I send a picture I take using text feature? Not having to send via email or using bluetooth? You know how other phones, you just choose a picture and choose to send the picture and then you choose the contact to send to.... How do I do that with the curve? I need to send pictures and sending via email doesnt work when I need the picture to go through right away. Help!
Also, I have been having this huge problem... I get a phone call or make a phone call and the phone goes back to my screen saver and not the phone call screen where it shows how long you are on the phone, the screen where it shows you are on a phone call. It has been that sometimes the phone doesnt hang up and since the call stays on the screen saver screen I dont realize it and people on the phone are listening to my conversations. Or i accidently hit a button without realizing it and it calls someone but I dont know this because the phone doesnt show me its making a phone call and I hear voices.... not in my head, coming from the phone. Or i make a phone call and think the call didnt go through and start going through phone book and other options on my phone without realizing the person I called is already on the phone. I hope I made sense.
Message Edited by veronicazambran on 03-03-2009 07:30 PM
Welcme to the Frums!
Who is your service provider?
Nurse-Berry
Follow NurseBerry08 on Twitter
Similar Messages
-
Unable to send or receive texts and calls
For nearly two weeks I've been unable to send or receive texts and calls I have tried resetting my phone deleting existing call / text convos and taking the sim out of my phone 4g internet still works but nothing else I'm using an iPhone 6. Why can't I send or receive anything?
Hi ,
Very sorry this is happening,
Have you tried the SIM in a different phone?
Also have you tried a network reset?
Note: Resetting the network settings will clear all WiFi passwords and refresh device network connections.
From the home screen, tap Settings.
Scroll down to, then tap General.
Scroll down to, then tap Reset.
Tap Reset Network Settings.
Tap Reset Network Settings to confirm.
Note: If a security code is enabled, this will need to be entered between steps 4 and 5.
Thanks. -
for some reason starting today i have been unable to send pictures via text! i've synced, downloaded the latest itunes, turned it off and back on. i just keep getting a red exclamation point and it says Message Send Failure.
i have the iPhone 4 3G through verizon
thank you for any suggestions you may have! and please try to keep it basic- i'm horrible with technology!! what am i doing with an iPhone anyway?? but i love it-- when it works right!http://support.apple.com/kb/TS2755
-
Help with TCP/IP communication via Teststand and Labview
Hello,
I am trying to create a sequence of tests and need to communicate between LabView vi's and another program over a TCP connection. When I have the sequence hard coded in LabView everything works fine, but my goal is to break up the sequence into steps and execute it in Teststand. Currently, the working LabView code sets up a listener, and the other program establishes the connection. Once the connection is established, I use the Read/Write to TCP blocks for the programs to send messages back and forth.
What I first tried in Teststand is to create a simple vi under Setup, that creates the listener, then the user is prompted to run the script on the other program to establish the connection. On the vi, I clicked on "create -> indicator" for the connection ID, then wired it as an output intending to use it in other vi's in the main part of the sequence.
The main (and very strange) problem is that TestStand will crash before I even get a chance to execute the sequence. Starting with a blank sequence, I open up an "Action," then "Browse for vi" on the Module tab and once I select that simple vi mentioned above, Teststand crashes before it's even loaded properly. A screenshot of the error, the error report (which mentions that the problem is with seqedit.exe), as well as the vi in question is attached.
This crash happens every single time I try to load the vi into the sequence. It seems to load ok on our NI machine running Windows XP, but it keeps on crashing on my pc (also running XP, i5 processor 1.85Gb RAM).
Is the problem with the LabView code, Teststand or my pc? I've tried re-installing Teststand but to no avail.
Any help is appreciated, and thank you in advance,
Sorin
Attachments:
error.JPG 194 KB
error report.txt.txt 111 KB
open_connection.vi 12 KBSorin,
It looks like you are using TS 4.2.1 with LV 2010. Can you please check if you have the following patchs installed on your machine
- http://digital.ni.com/public.nsf/allkb/7D728B70F167CE088625776E00582C7B?OpenDocument
You will need to install both the TS 4.2.1 and LV 2010 F2 patch.
Regards
Anand Jain
National Instruments -
Dreamweaver help with site set up. Local and remote server
Hi,
I've just got dreamweaver cs6 and i'm having issues with managing the site.
Up until now I was using dreamweaver cs3 and when setting up a new site, the site definition had the category Local info and Remote info separated.
Now on CS6 I cannot set up both individually for the same site, it doesn't give the option, it's one or the other which it doesnt work for me if I want to test a page locally, via preview on browser, otherwise it will upload it to the server if I choose FTP. If I choose only local then I lose all the ftp settings and once I've done the testing it won't upload to the server.
Surely it has to be a work around this or something Im doing wrong but I can't see what it isThere is no need to uncheck remote and testing. Previewing locally should work exactly the same as it did in CS3.
Are you using a server-side language? If so, expand the Files panel by clicking this icon:
Then make sure that the Testing Server icon is selected. -
Hi,
I unlocked my phone about an hour ago using a legitimate unlock code from unlocks.co.uk. I entered the code and it seemed to work fine and now my network shows up as Vodafone uk (I have unlocked it from T-Mobile)
It looks as though it is unlocked and I have checked the connections - I have signal and it says I am connected to the vodafone network, however, I cannot make any calls or send texts! If I try to call a number I get the call failed signed and the failed call dial tone. I tried to send a text but it didn't work - the text now has a red X and says 'unidentified subscriber'. I know this is a fault with my phone as the people I have tried to text and call have no problems with their phones/networks.
Please somebody help me! I have no idea what to do! I contacted the unlocking company and they say if I'm sure the sim I'm inserting is active (which I am) then it is likely my phone has been blacklisted, but I dont think it has. I bought it as a pay as you go handset from Argos just a week ago and it's been working fine until then.
I put my old t-mobile sim back in and it seems to work - does this mean it hasn't been unlocked successfully or not?
Many thanksDo a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Then try your Vodafone SIM again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have iphone 5 and when I take picture and then later send it via text message to another person with iphone 5 the photo they get is always cropped on the right side. Any help?
Make sure the contact has a 10-digit number, not just the 7-digit number.
If that isn't it, does the problem only happen with iMessages, SMS or MMS messages?
Try tapping Settings > Messages, then turn SMS and MMS off. Test, then repeat again only leaving SMS or MMS on.
This Apple doc has some good tips too -> iOS: Troubleshooting Messages -
I have MMS on my phone & yes its turned on, however I cannot send pics via MMS.
Help!here a guide to send mms on iphone
http://www.messiphone.com/mobile-secret/send-mms-iphone.html -
Droid Charge - 3rd one, same problem with sending photos via text (MMS)
Sending photos via text messaging (stock messaging client) does not work consistently.
In a 4G area, the texts go through fine with minimal errors (perhaps 1 out of 20 failures to send)
In a 3G or less, the texts give me an error message of "Failed" or pending, whether or not the recipient gets it (usually the recipient does not get the message) - this is true of recipients with AT&T, Sprint and Verizon service with smartphones and Blackberries.
If I do not delete the thread, I get the message "Too many unsent multimedia messages" and the phone will not initiate the send. The phone will, however, continue to try to sending the photo, causing very rapid battery drain.
The last phone was replaced because the phone was not closing out the message, according to the last technician to whom I spoke.
Is there something else I can do to get the full functionality of the phone I paid for? This is an extremely frustrating issue, and makes me regret switching to Verizon.Hi moonchef!
Sending pictures is something I do on a daily basis, so I know how important this is! It is true that pictures have to be sent over the VZW network and not Wifi. I would like to ask you if you resent the same picture that failed? Or did you send the same picture again, but in a separate message? Please try sending it again separately and let me know the results. Thanks!
Christina B
VZW Support
Follow us on Twitter @VZWSupport -
Treo 700wx: Sending photos via Text Message
Spoke with Sprint people and I was told my phone doesn't have the capability to send photos via text.
Does anyone know of a workaround to allow me to send photos from thumbnail photos?
Post relates to: Treo 700wx (Sprint)welcome to the palm help forums
Go to the thumbnail window and take your stylus and hold down the picture and you should see some options.
Post relates to: Centro (Sprint) -
I'm trying to update my iOS to 6.0, using iTunes (with my 4s connected via USB and WiFi is on also). I get a message that 'there are purchased items on my iPhone that have not been transferred to my iTunes library. Yet, I can't find those items! Help! There is not error message number just the text message. I've searched for an answer but have found nothing on "transfering items purchased to your iTunes library".
Right click on your device icon on the left pane of iTunes and click on transfer pur....
-
Whats the difference between sending messages via socket and MQs?
Whats the difference between sending messages via socket and MQs?
Soph wrote:
Whats the difference between sending messages via socket and MQs?With JMS (and the like) your application uses a socket to connect to a central server called a "*Message Broker*". Over this connection it can send or receive messages.
A Message Broker is somewhat analogous to a database server. Multiple clients connect to it to exchange messages. As with a database a client first establishes a connection, then requests specific facilities like subscriptions.
It creates a strong decoupling between sender and receiver and handles stuff like allowing multiple receivers for the same message, queuing of messages for applications not currently running and so on.
(And don't worry, you can get perfectly good message brokers for free such as openMQ and activeMQ.) -
How do i send picture via text msg?, how do i send picture via text msg?
how do i send picture via text msg?
There is a little button with a picture of a camera on it right next to the text input field in the Messages App. Tap that and you can attach a picture.
-
IPhone 4 IOS 7 - unable to send photos via text
I have been unable to send photos via text since updating to IOS7. All of my settings are up to date and this problem occurs on wifi, 3G and makes no difference if I send the photo via message first or from my camera. I have read all the troubleshooting guides and nothing has provided a permanent solution. Resetting the network seems to work for a limited time before the photos come up with the same "not delivered" icon again.
Does anyone know why the reset would work and then stop working if I haven't switched my phone off?
ThanksYou may have to backup and restore through iTunes. Have you contacted your carrier about this since this feature is carrier-provided?
-
How do i send pics using texting messaging?
how do i send pics using texting messaging?
it seems sms wont let me do it.
on my old w810i i usually text the pic to anyone.I think you're suppose to address it with the recipients phone number @ whatever carrier they use. [email protected]
Someone can comment if this is not correct please.
Maybe you are looking for
-
As part of my Physics class we need to graph data that can only be displayed using a line of best fit (AKA a Trendline) - I can make any graph fine on Numbers but I am at a loss on how to make a trendline. Could you please aid me in my search to crea
-
how can I sort my photos in Photos so the newest are shown at the top
-
im wanting.... i think to update my flash player i have adobe flashplayer 10 active x right now do i need to update it?? thanks
-
Can't search for specific tag - Dreamweaver 8
All of a sudden, I can no longer search for a specific tag in Dreamweaver 8 (Mac OS 10.4.6). It was working fine and I had just run a sitewide search, then boom! The attribute plus (+) and minus(-) signs appear over the text "Search:" right next to t
-
I don't use this printer a lot, but I did use it a couple of days ago and all was OK, Today, i tried to print a form off the BBC site, printer version selected, sent to print and the printer made a series of noises as if printing, then just fed out