Blackberry desktop manager wont detect blackberry

i have looked everywhere for a solution to my problem and i simply cannot find a fix. my blackberry curve 8520 wont connect to my desktop manager. i have tried everything i could think of however nothing has proven successful.
here is what i have so far done:
-reinstalled desktop manager
-installed latest update for desktop manager
-installed drivers for blackberry
-checked usb cable and ports
-made sure desktop manager was set to usb
-pulled the battery on the blackberry (power cycled)
-restarted my computer
i believe this is everythign i have currently tried, i am running 64x ultimate windows 7 and my computer does recognise that a blackberry is put in as everytime i do so a ballon at the bottom om my screen says a blackberry has been detected and gives it a drive name and such. it is also charging which ensures enough power is being delievered to the blackberry. i do not have another computer to try the desktop manager on. if anyone has a fix to this issue please respond asap as help would be very much appreciated.

Hi and Welcome to the Forums!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-​Desktop-Software/Tips-for-getting-BlackBerry-Deskt​...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-​Desktop-Software/Desktop-Manager-quot-disconnected​...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Blackberry desktop manager Wont install On my Macbook Air

    Hi, Ive got a 2011 13' Macbook air, i7processor 4ghz etc
    Ive ben trying to instal the bbdm on it for some time. When I download the software and try to open it i get a terminal screen whith the hading Blackberry Desktop software.mpkg --Bash-- 80x24
    Any help would be appreciated
    Thanks

    Please note that I am using Blackberry Desktop Manager 6 under Windows 7 Professional OS under Virtual Machine(Vmware Fusion 3.1.3). I use to do Certificate Sync from Windows Internet Explorer to Blackberry Device. How do I acheive this thru Blackberry Desktop Manager for Mac.
    Thanks

  • Tips for getting BlackBerry Desktop Manager to detect the BlackBerry smartphone!

    Here are a few tips that may help if your PC is unable to detect your BlackBerry smartphone!
    1.    Install the desktop manager software – when installing the Desktop Manager software that came with your device be sure to Not have the BlackBerry connected to the computer during this process.
    2.    Always use the USB ports from the back of the computer; never use a USB hub or a docking station USB port.
    3.    If you have another UBS cable you can try doing that to make sure it is not the cable causing the issue.
    4.    If you are using a laptop computer disable the power management settings. 
        a.    For Windows-XP and Vista do the following to disable power management on the USB ports
            i.     On the computer, right-click My Computer and select Properties.
            ii.    Click the Hardware tab, and then click Device Manager.
            iii.    Expand Universal Serial Bus controllers.
            iv.    Right-click the USB Root Hub and select Properties.
            v.     Click the Power Management tab, and clear the Allow the computer to turn off this device to save power check box.
            vi.    Click OK.
            vii.    Repeat steps i. through vi. for each USB Root Hub listed in BlackBerry Device Manager.
    5.    If you have uninstalled and reinstalled the Desktop Manager Software trying using the following knowledge base article to do a “clean uninstall” of the software. http://www.blackberry.com/btsc/KB02206
    6.    The existing USB driver installed is for an earlier model of the BlackBerry smartphone.
        a.    Manually upgrade the USB driver for the BlackBerry smartphone by completing the following steps:
            i.     Right-click My Computer and select Properties > Hardware > Device Manager.
            ii.     Under Universal Serial Bus Controllers, verify that the BlackBerry smartphone is found.
            iii.    If an exclamation mark is displayed, right-click the BlackBerry smartphone and select Update Driver.
            iv.    If the Hardware Update Wizard prompts you to use Windows Update, select No not this time and click Next.
            v.     Choose Install from a list or specific location and click Next.
            vi.    Choose Don't search. I will choose the driver to install and click Next.
            vii.    Click Have Disk and then choose Browse.
            viii.   Browse to C:\Program Files\Common Files\Research In Motion\USB Drivers.
            ix.    Double-click on RimUsbNT.inf, click OK, and then click Next.
    7.    If you have another PC try using that PC to see if you able to get the device connected
    8.    If you do not have another PC then try creating a new user account on the PC and then install the Desktop Manager software on that new profile.
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

    There is also some great info in the below thread 
    http://supportforums.blackberry.com/t5/BlackBerry- Desktop-Software/Desktop-Manager-quot-disconnected -quot-and-I-can-t-get-rid-of/m-p/506238/highlight/ false#M16105
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Blackberry Desktop Manager wont start

    I am SOOOO frustrated.
    I have installed the BB Desktop Manager software (never installed or used it before) and it has downloaded fine but it just wont open!! No errors, just nothing. Am getting really frustrated. 
    Any ideas?

    I am not sure I understand - are these instructions you have seen/been given?
    What is the context for your post? I have an issue with DM 6.02 and Windows 7 which is that DM just won't start, the only workaround I have found is to downgrade to 5.0.1 which is not ideal but does seem to work. It worked fine on XP but when I switched to Windows 7 it installed fine but then would not start up.

  • Mac version of BlackBerry Desktop Manager KB articles

    The following is a list of knowledge base articles for the Mac version of BlackBerry® Desktop Manager:
    KB18769 - System requirements for BlackBerry Desktop Manager version 1.0 (for Mac OS)
    KB18770 - Features of BlackBerry Desktop Manager 1.0 (for Mac OS)
    KB18771 - Installing and removing BlackBerry Desktop Manager version 1.0 (for Mac OS)
    KB18776 - How to back up and restore BlackBerry smartphone data using BlackBerry Desktop Manager version 1.0 (for Mac OS)
    KB19148 - How to synchronize a BlackBerry smartphone with Microsoft Entourage using BlackBerry Desktop Manager version 1.0 (for Mac OS)
    KB19150 - How to update or modify applications on a BlackBerry smartphone using BlackBerry Desktop Manager version 1.0 (for Mac OS)
    KB19151 - Faster Synchronization and Safer Synchronization options in  BlackBerry Desktop Manager version 1.0 (for Mac OS)
    KB19152 - How to synchronize music from iTunes using BlackBerry Desktop Manager version 1.0 (for Mac OS)
    KB19470 - Unable to Synchronize Mac Desktop Manager with Entourage 2004
    KB19645 - Media Transfer Protocol (MTP) enabled BlackBerry smartphones are not detected by the BlackBerry Desktop Software for Mac
    KB16473 - Remove or uninstall BlackBerry Media Sync for Mac computers
    KB19624 - After the TetherBerry application has been opened, the BlackBerry smartphone is not detected by BlackBerry Desktop Manager version 1.0
    KB19631 - Groups in Apple Address Book do not synchronize with contact list categories on the BlackBerry smartphone
    KB19728 - The BlackBerry Desktop Manager is unable to detect the BlackBerry smartphone when the Mac computer is booted into Mac OS X 10.6 64bit mode
    KB19682 - "Persistent Store Migration Failed" error message is received upon opening BlackBerry Desktop Manager
    KB19683 - PIN, Home 2, Work 2, and Other field values within the contact list are removed from the BlackBerry smartphone after modifying the contact list entry in Microsoft Entourage
    KB19636 - "Categories" field in Tasks does not synchronize between Entourage Notes and the BlackBerry smartphone
    KB19625 - PIN field within the contact list does not transfer to the Address Book on the Mac
    KB19596 - Synchronization using iCal with read-only calendars generates an incorrect prompt for conflict resolution in future synchronizations
    KB19621 - Previously synchronized calendar or contact information gets erased from the Mac computer after synchronizing with the BlackBerry smartphone
    KB19687 - Address Book synchronization completes, however no data is transferred to the BlackBerry smartphone
    KB19630 - Calendar appointments accepted on the BlackBerry smartphone cannot be edited after synchronizing with iCal
    KB19629 - Mass storage drives are not mounted after the Macintosh computer awakes from sleep mode
    KB19640 - BlackBerry smartphone has only one Work/Home phone number after synchronization
    *** We will continue to add more as they become available.
    Message Edited by FozzyBear on 10-02-2009 09:35 PM
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

    I think you're going to have a problem with that.  http://forums.crackberry.com/mac-users-f62/desktop-manager-os-lion-624231/
    Try BlackBerry support  >  BlackBerry Support

  • Mac Blackberry Desktop Manager Won't sync with New Bold 9650

    I have a new Bold 9650 (upgraded from a curve). My curve recognized and would sync with no problems. I used BB Desktop Manager to restore my new bold with all it's contacts and such. When showing up in DM, the options for restore and back up are available. When I click on applications it says I need a newer version of desktop manager. I have downloaded the most recent from the website and it still says this. 
    More importantly, the SYNC option doesn't even come up while the two are connected. It stays greyed out and won't let me get the option to sync. This worked fine with the curve, but the bold won't sync!!! Help please!!!

    I too had the same problem. See below... there's a workaround. Apparently they are working on it.
    BlackBerry Desktop Manager is unable to detect the BlackBerry smartphone when the Mac computer is bo...

  • Blackberry desktop manager error message

    When I install my bdm I receive an error message "Blackberry desktop manager has encountered a problem and needs to close".  It carries on installing however till the end.  When you try to open it, you get the same error message but then it opens up the application.  The problem is that it does not detect my phone at all.  I have tried every solution that I could find on the message boards - checked the USB ports (it picks up the blackberry and installs the software and charges), it is registered on the wireless network etc., etc.  I am no technician so a lot of the answers went way above my head.  I tried different versions of desktop manager but with the same result.  What am I to do?
    The error message that I get when I open up desktop manager is the following:
    C\DOCUME~1\ANNELI~1\LOCALS~1\Temp\4ef7_appcompat.t​xt

    Try the following:
    Make sure your BB is not connected to the computer.
    Close the desktop manager.
    Go to C:\Documents and Settings\<user name>\Application data
    Delete the entire Intellisync folder.
    Connect your BB and open the desktop manager.
    Sync your device.
    ~Tami~
    Intellectuals solve problems; geniuses prevent them.
    -- Albert Einstein

  • Error Syncing Contacts - 8330 and Mac Blackberry Desktop Manager

    I am running Mac OS X 10.6.2, Blackberry 8330 version 4.5.0.127, and Blackberry Desktop Manager version 1.0.2 (build 8)
    I get an error message when trying to sync my contacts to Entourage.  Also, unlike calendar and task option windows, I do not get any selection options.
    Any help would be appreciated.

    I too had the same problem. See below... there's a workaround. Apparently they are working on it.
    BlackBerry Desktop Manager is unable to detect the BlackBerry smartphone when the Mac computer is bo...

  • Vista/Blackberry desktop manager 4.5 problems

    Have tried taking battery out of Blackberry, desktop manager still reads "disconnected".   Cannot be to uninstall/reinstall since I have to download it from the blackberry site and it takes nearly two hours.  Help

    In Desktop Manager, with the blackberry connected via USB, click Options > Connection Settings > Select USB and then click Detect.
    New to a Blackberry? Check out http://www.discoverblackberry.com

  • Blackberry Desktop Manager won't read Blackberry Torch

    I've been having trouble with my Blackberry Torch as my computer will not recognize it in Blackberry Desktop Software. It's actually very wierd because I will plug my phone in to a USB port and the port will charge the phone, but nothing else happens. The reason why this is weird because I've had it work for a long time and then one day, it just didn't work any more. I've done every type of trouble-shooting listed in the Help menu including rebooting the computer/phone, replacing the cable, re-downloading the software, etc etc. I've also been able to connect the phone using Bluetooth, but unfortunately I was limited with what I could do with that connection (ie. I couldn't tranfer any music/media).
    So yeah if you have any suggestions, please let me know. I'd really appreciate it.

    VertNellie wrote:
    I'm having the same exact problem and I have done each and every troubleshooting tip, and nothing has worked. Any other suggestions?
    Hi and Welcome to the Community!
    Here is something you should first perhaps try, before those tricks. The simplest way is to, on a PC (you cannot do this on MAC):
    1) Uninstall, from your PC, any BB OS packages
    2) Make sure you have the BB Desktop Software already installed
    http://us.blackberry.com/software/desktop.html
    3) Download and install, to your PC, the BB OS package you desire:
    http://us.blackberry.com/support/downloads/download_sites.jsp
    It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
    4) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
    C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
    C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
    Now you are ready to try the tricks, but since this thread is so ancient, I'll re-post my current list of things to try...
    Here is the list of troubleshooting articles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
    KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
    KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
    KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed 
    KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
    KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
    KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to install Blackberry Desktop Manager on Windows 8

    Hi Team,
    Please help as I am trying to install Blackberry Desktop Software for my Blackberry Bold 4 (9900) phone,
    I did not get any software CD with the phone hence downloaded the software from 
    http://us.blackberry.com/software/desktop.html
    and when I try to install I get the following error,
    I do not understand this issue can any one help me on this.
    Windows ® Installer. V 5.0.9200.16384
    msiexec /Option <Required Parameter> [Optional Parameter]
    Install Options
    </package | /i> <Product.msi>
    Installs or configures a product
    /a <Product.msi>
    Administrative install - Installs a product on the network
    /j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
    Advertises a product - m to all users, u to current user
    </uninstall | /x> <Product.msi | ProductCode>
    Uninstalls the product
    Display Options
    /quiet
    Quiet mode, no user interaction
    /passive
    Unattended mode - progress bar only
    /q[n|b|r|f]
    Sets user interface level
    n - No UI
    b - Basic UI
    r - Reduced UI
    f - Full UI (default)
    /help
    Help information
    Restart Options
    /norestart
    Do not restart after the installation is complete
    /promptrestart
    Prompts the user for restart if necessary
    /forcerestart
    Always restart the computer after installation
    Logging Options
    /l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
    i - Status messages
    w - Nonfatal warnings
    e - All error messages
    a - Start up of actions
    r - Action-specific records
    u - User requests
    c - Initial UI parameters
    m - Out-of-memory or fatal exit information
    o - Out-of-disk-space messages
    p - Terminal properties
    v - Verbose output
    x - Extra debugging information
    + - Append to existing log file
    ! - Flush each line to the log
    * - Log all information, except for v and x options
    /log <LogFile>
    Equivalent of /l* <LogFile>
    Update Options
    /update <Update1.msp>[;Update2.msp]
    Applies update(s)
    /uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
    Remove update(s) for a product
    Repair Options
    /f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
    Repairs a product
    p - only if file is missing
    o - if file is missing or an older version is installed (default)
    e - if file is missing or an equal or older version is installed
    d - if file is missing or a different version is installed
    c - if file is missing or checksum does not match the calculated value
    a - forces all files to be reinstalled
    u - all required user-specific registry entries (default)
    m - all required computer-specific registry entries (default)
    s - all existing shortcuts (default)
    v - runs from source and recaches local package
    Setting Public Properties
    [PROPERTY=PropertyValue]
    Consult the Windows ® Installer SDK for additional documentation on the
    command line syntax.
    Copyright © Microsoft Corporation. All rights reserved.
    Portions of this software are based in part on the work of the Independent JPEG Group.

    Hi and Welcome to the Community!
    Here is a KB that discusses that error:
    KB19300 Windows Installer command line parameters information box appears when attempting to install BlackBerry Desktop Manager
    Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error when updating Playbook OS version via Blackberry Desktop Manager

    Greeting,
    I have a batch of old playbooks which having the stack charging issue, but I found that I can update the OS to the newest version (2.1.0.1917) via Blackberry Desktop Manager, then the charging algorithm will be changed to the updated one and go over this dead battery issue. I was able to do so successfully in the past week smoothly on several devices.
    But since this Monday, the Desktop Manager is saying "An updated Blackberry Desktop Software component must be installed before you can continue" when downloading the Desktop software and will appear "There was an error updating your software, an error has occurred while downloading the Blackberry Desktop Software.Please try again." and preventing the process. Seems there are some change on the server side starting this week which has caused this problem, but there's no error code to locate the exact issue.
    I tried on 2 different computers as well as completed uninstalling and re-installing the Desktop manager, also tried to disable the automatic update as been advised in some threads. So no clue how to deal with it for now. It will be highly appreciate if some one can share some idea.
    I've attached the step by step screenshots for reference, where you can find here:
    http://forums.crackberry.com/blackberry-playbook-f222/error-when-updating-playbook-os-version-via-bl...
    Thanks,

    BLock wrote:
    Sorry I can not help you with your problem but perhaps you can help me.  
    Can you advise where I can find info on "disable the automatic update"?
    just ignore the update if you dont want it on the playbook
    for reloading the OS
    First I would like you to do a Back Up of your PlayBook using your computer and BlackBerry Desktop Software.
    This can be downloaded for free from http://us.blackberry.com/apps-software/desktop/
    After the Back Up is complete I need you to unplug your PlayBook and then push and hold down the Power Button until the unit Force Powers Off.
    Now, while Desktop Software is still open on your computer and the PlayBook Powered Off, Connect the PlayBook to your computer.
    You should see and error screen from Desktop Software pop up that has the options to Retry, Update, or Cancel.
    QUICKLY choose the Update option.
    This will erase all the information off of your PlayBook and Re-Write the Software back onto it. Once it's complete your PlayBook will need to go back through the setup wizard, and you can then perform a restore using Desktop Software to return your information. The only thing that won't come back after the restore are the apps that you downloaded from App World but they can be easily Re-Installed using the My World feature in App World.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • BlackBerry Desktop Manager on Mac OS 10.4.11

    Hi all,
    I'm installing BlackBerry Desktop Manager for my MacBook (OS 10.4.11). However, the software requires at least 10.5.5 and I tried installing it with no success. It says it "requires OS 10.5". Does it mean I have to install 10.5.1 first and then install 10.5.5?
    Basically, my question is we CANNOT skip version and install 10.5.8 (which is the latest) on, say, my 10.4.11?

    Hello nrugkhapan, and a warm welcome to the forums!
    Does it mean I have to install 10.5.1 first and then install 10.5.5?
    That means you must purchase & install Leopard/10.5.x, which is freely upgradable to as far as 10.5.8, but you'll likely have to call Apple to get a cpy,since they no longer list it for sale on their site.

  • Blackberry Desktop Manager says Disconnected

    Blackberry 8330 Curve
    Blackberry Desktop Manager 4.3.0.17
    XP Professional
    Microsoft Outlook 2007
    Blackberry Enterprise Server Sync
    Installed USB and Modem Drivers (DM4.5_B13)
    Tried:
    Uninstalling / reinstalling desktop manager many times
    Tried 3 different USB cables and 4 different laptop ports
    Our IT guys spent 3 hours with no success either
    Removing Blackberry battery
    Message Edited by Flabby on 12-19-2008 10:33 AM
    Solved!
    Go to Solution.

    I finally resolved this myself by editing the registry and removing all references to Sprint and Roxio.  I then reinstalled the Blackberry desktop software v 4.7, rebooted and installed Sprint SmartView.  It now works.  The key for me was editing the registry to remove previously installed versons of the software.

  • Blackberry Desktop Manager/Ubuntu-Wubi?

    Blackberry Desktop Manager/Ubuntu-Wubi, are they compatable with each other, if so where can I get the correct software for Ubuntu? Thanks in advance>

    please search the fine web :
    http://supportforums.blackberry.com/rim/search?submitted=true&type=message&sort_by=score&advanced=tr...
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for

  • Cannot turn off double sided printing on HP 8600 OSX v 10.8.4

    Hello! I cannot figure out how to turn off double sided printing. I do not see an option in the system print dialogue or on the printing settings itself. When I remove the double sided attachment from the back of the printer - it won't feed the paper

  • Troubles in converting roman to arabic..pls HELP!!!

    i have a code here in converting roman to arabic and vice versa. the roman to arabic method is properly giving the correct output, then the arabic to numeral methos is malfunction..what i want is the ROMAN to ARABIC only,,,but im confuse on what to d

  • Partial Payments to Vendors

    Hi How to handle partial payments for vendors? i know we can go and do the partial payment thro F-53 but F-43 doesn't print checks right? so how do i print the check  for partial payments, client doesn't want write manual check. please help. Points w

  • FBWE Posting

    Hi, My problem is  that in transaction FBWE when i select different bills of exchange and finally post them what i want to do is post those bills of exchange to a different bank account. Let me explain myself better: First i enter FBWE and choose the

  • AppleScript under 10.7 Lion

    Hello everyone, first, I am a beginner with apple and mac os. I have wrote a script for 10.6 to use the spellchecker within my Java-Program: tell application "Automator Runner"    set mySpellChecker to call method "sharedSpellChecker" of class "NSSpe