Blackberry Desktop Software slows down Network Connectivity on Win 7 start up

Hi,
I am new so be gently..lol
I am running windows 7 64bit Home Premium. I recently noticed that on start up my PC was taking between 10 and 20 seconds to set up it's network connectivity, which previously was almost instant. There were no erros within the event logs to suggest why this was occuring. The last thing installed was the blackberry desktop manager. I uninstalled this, and found that my network connectivity was now occuring almost instantly again.
Is this a know issue with this software? I have searched the forum but cannot find anything simliar, only people saying it was slowing down start up as a whole which is not what is happening to me.
Thanks for any help or advice in advance.
TLE

Hi and Welcome to the Forums!
Typically, if you have installed the RIM DTM software to auto-start every time you boot your PC, the boot time will increase. Personally, I've found no reason to allow DTM to auto-start...I only launch it when I need it.
To perform a full clean uninstall, see this KB:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

BlackBerry Desktop Software shuts down when connecting secondary device

All,
I have a main and a secondary phone (used for local SIM when traveling abroad)
After I backup my main device I connect my secondary device to be able to "Restore" and have all my contacts sync on both, but alas, once the secondary device is trying to connect the Desktop Software just shuts down without giving any error
The Backup process itself works great
I use the same cable, same USB Port, both devices have a charged battery and work great on a day to day basis
Main Device: BlackBerry 9900
Secondary Device: BlackBerry 9870
Desktop Software Version: 7.0.0.59 (May 16, 2012 Bundle 60)
Laptop OS: Windows XP Professional SP3
Thanks

I'm not familiar with this particular package, but with similar packages from other carriers there's usually a setting that lets the program control your Network - it may only say Wi-Fi.
The BlackBerry drivers include a Dial-Up connection which is probably getting shut down by the software which kills Desktop Manager.
If you turn off that option, the problem should go away (reboot probably a good idea).
Jerry

Blackberry Desktop Software shuts down when running Sprint Smart View Internet Service (Air Card)

Just installed Blackberry Desktop Software and it runs ok when I am not running Sprint Smart View (This is my program for my internet service / sprint air card). As soon as I start Sprint Smart View the desktop software no longer works and just shuts itself down after a minute or two.

I'm not familiar with this particular package, but with similar packages from other carriers there's usually a setting that lets the program control your Network - it may only say Wi-Fi.
The BlackBerry drivers include a Dial-Up connection which is probably getting shut down by the software which kills Desktop Manager.
If you turn off that option, the problem should go away (reboot probably a good idea).
Jerry

Blackberry Desktop software 6 - Deleting previously connected devices

In blackberry desktop software 6, when you click on the device menu, it lists all prevously connected devices.
Yesterday someone connected their device to my computer.
How can i delete that device listing from the list.

I found that the folder "My Documents\BlackBerry\Backup" contains the backup files in the format: name_of_device_in_bb_desktop.pid.
I just deleted the one file that I did not need.

BlackBerry Desktop software doesn't work on 64bit win 7

Hi, I downloaded blackberry desktop 710_b039_multilanguage software from blackberry site and installed on windows 7 64bit os, after the installation it continuously opens an installation window and please wait while windows configures blackberry desktop software, it doesn't stops untill I uninstall the BB Desktop software. I even updated the latest JAVA software. can some one help me with solution please.
Rajasekhar.

Hello!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blackberry desktop software cannot communicate with the connected device for the playbook

Hey whats up..... I'm new to the playbook and I'm having serious problems trying to connect my playbook with the blackberry desktop software. when i tried connecting it, a small windows popped up, saying "blackberry desktop software cannot communicate with the connected device.............. and if error to update". So i did. I'd already backed up the playbook the day before so it was ok when the small windows said, "all data would be remove and playbook would return to factory settings". I did all the procedures and the blackberry desktop software still wont connect to the playbook. I tried uninstalling the blackberry desktop software and re-installing it, but the same thing keep on showing up. So i cant access my playbook.
Can someone plz help me????????
PS... My Playbook is on OS 2.1.0.1088 and is 16GB
I tried the updating method 5 times now and uninstalling and reinstalling the blackberry desktop software 7 twice. I dont know what else to do, and also Is there another way i cant access the playbook?
Solved!
Go to Solution.

Try this:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB26904&sliceId=2&cmd=displayKC&d...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Blackberry Desktop Software crashes on start up

Hi
I just bought new BB and downloaded Blackberry Desktop Software in order to connect my device to my laptop however after downloading and installing when I tried to run the software it crashes.
I need to connect it to my laptop.
Any help or guidance is highly appreciable.
Thanks,
Sunny Sharma

Hello ben1107
I have already given this information earlier in this thread however here is the information you looking for :
OS Name Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
Blackberry Desktop Software Version 6.1.0.35

Blackberry Desktop Software (Roxio, specifically) causes network problems and blue screens.

I'm posting this note because I just solved my network issue/crash problems. I started experiencing lots of disconnects and page not found on my office computer over the past few days. Only thing I could think of that was different lately was that I installed the Blackberry Desktop Software. Then a huge lightbulb went on over my head. I remembered when it was installing, it said it was installing "Roxio" software and at that moment shivers went down my spine from past experiences.
     Well, I have lots of good "bad" experiences with Roxio CD software which had caused these same problems on two of my home computers. It caused blue screens when used in conjunction with my wireless Netgear card and also standard network card. The same symptoms including very slow internet access, general machine sluggishness, etc. I was trying to chase this down for months til I finally removed the Roxio crapware and ALL problems went away. No more slow machine, no more page not found and no more blue screens on two of my computers. Now, on a completely different Toshiba work laptop and different network adaptor, same problems.
     So, here we are again with Roxio as part of Blackberry Desktop software. I like my new Blackberrry 8830, but I have to pass this along to the Blackberry folks because I KNOW I'M RIGHT about this. I only installed the software so that I could type my contacts into Outlook and then download to my Blackberry. So, after realizing the common symptoms and after having completed my download (which worked great by the way), I removed the Blackberry Desktop Software and I'm back to speedy everything, no more pages not found, no more putty disconnects, and no more blue screens.
     I hope someone gets good use of this post because this drove me crazy the first time around.
-- Jeff

We had the same problem.
We did extensive troubleshooting, and found the problem was effecting our new HP Windows XP .Laptops.
We did not have any trouble with the Older Dell Latitude we have.
We found the BSOD still happened after removing the Black Berry Desktop Manager Software.
We traced it to a memroy / resource leak in the USB subsystem.
The workaround we found is to go into the Device manager, and remove all the drivers from the USB section.
** Disclaimer : This works for us, but may make your computer unusable. Backup your data to external storage.
               Back up your computer
               Start -> control Panel -> system ->Hardware tab -> Device manager.
                Expand "Universal Serial Bus Controller" at bottom of list.
                Right click on each Item, and select "uninstall"
                Don't reboot after each one.
                * Remove ALL the entries under Universal Serial Bus Controllers *
                Repeat until all the entries under "Universe Serial Bus Controller" are removed
                (there may be one that sticks, thats ok. so long as it has been uninstalled.
            Reboot.
            The OS will rebuild the USB stack and drivers to default.
This has worked for us so far.
We are not sure if this wont break something else.

Blackberry desktop software doesn't connect with address book

blackberry desktop software version 2.4.0 doesn't connect with address book on a mac os lion (10.7.4). Sync contacts not possible. Use a BB 9500 v5.0.0.841 (plateform 4.2.0.380). Any solution ?

You have both Desktop Software and Link set to open when a device is connected to your Mac. You need to go to the settings of Desktop Software (I don't recall exactly what to do but there should be some settings in the top right corner) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that Link is set to open. That should resolve your issue.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

"The BlackBerry Desktop Software cannot connect with this device." after repair

I download the Desktop Software for BlackBerry onto my Mac Book Pro for the first time.
After installing I connected my PlayBook. I get the message "The BlackBerry® Desktop Software cannot connect with this device."
The program suggested I repair the device software, so I did. After that I set it up and ran the updates.
When I plug it back in I get the exact same message.
What should I do next?
co-founder of Diaree | BB Dev for PictureThis

I also cannot connect to my two playbooks using desktop manager on mac.
One of the two playbooks is now shipped back to rim for repair (see here http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/5MP-Playbook-Camera-Blackscreen-Errors-Ha... The issue of desktop manager not being able to connect to the playbook started with this playbook when the repair I was prompted to to stopped 1/4 way into it. Multiple retries did not make any difference.
Since then, I have tried connecting my other (functioning) playbook to the same mac but when I plug in usb cable I get the same "cannot connect" errmsg and prompted to "repair". I am definitely NOT going to "repair" this one. So I uninstalled the desktop manager and reinstalled it to see if it makes a difference. Unfortunately it did not and I get the same "cannot connect" errmsg.
If anyone has any suggestion how this issue can be resolved that would be great. I think something is stuck on the mac and is not getting wiped out when desktop manager is uninstalled. Thanks.

Can others on a shared wi-fi slow down my connection or block my connection with software or special hardware?

Hi, Can others on a shared wi-fi slow down my connection or block my connection with software or special hardware? My connection has been very spotty and many times cuts off. The router is in our upstairs living room only 70 feet from my room, but it just seems like recent connections have been horrible. Also, I noticed the following image when trying to access the apple webpage. Anyone know what that might be? It's not the usual apple icon next to the address.
thanks
Dave

Welcome,
Indeed, by definition other users would "share" the bandwith and hence slow you down - but not cut you off.
More likely is that there are other devices (e.g. cordless phones) are causing interference. You don't specify which AP you have but if it an 802.11n one you should get better reception as the 5GHz range does get so much interference.
Try utilities like NetSpot or iStumbler to see what's in range.
The icon on the web page is probably something else not related to WiFi
Regards,
Shawn

Error Msg - Verify Internet Connection (BlackBerry Desktop Software)

I'm getting an error on one of our BlackBerry 8900 Curve.... "Reload Software 513"
I've tired updating the software with and with out the battery on the device while its plugged to my PC. As BlackBerry Desktop Software starts to download modules I get the error.... "An error has occurred while downloading software for your device. Please verify your Internet Connection or try again later, if the problem persists."
I've been having this issue since yesterday morning. By the way, I do have internet connection.
Anyone else run into this issue and was able to resolve it?
G.~

Use this method to upgrade the OS, make sure that Desktop Manager is is not loaded or running.
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't install downloaded Blackberry Desktop software

I downloaded the latest version of the BB 8100 desktop software from the BB site to my computer. It unzips OK but when it starts to install it stops every time. Have exited every Windows program first. Any ideas?

Problem:
Similar but not the same as errors 2738 1607 encountered with installing blackberry desktop manager software, there is no error message here, simply the WinZip Self Extractor completes, then the Installshield Wizard opens and appears to be installing. After several seconds, a BlackBerry window opens (BlackBerry Desktop Software - Installshield Wizard) with the message: "The wizard was interrupted before the BlackBerry Desktop Software could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again.    Click Finish to exit the wizard.
Solution(s)
Ok, saw this thread was un answered so I thought I would reply in case anyone out there has this issue too, it drove me mental for a week too. (before you read on I am not responsible for any messed up computers, blackberries or anything at all! This is a GUIDE that worked for me and not the law!) So, here we go… I tried many many things to fix this, I am on Vista home, berry 9700 bold 2, TELUS Mobility (doesn’t really matter), Blackberry handheld OS 5.0, Vista Desktop Manager 5.0.1. English without media manager/roxio w/Sp1 downloaded from blackberry. I tried just about everything you can imagine, know my way around computers reasonably well (or so my mom tells me haha) and uninstalled the previous version of desktop manager with REVO uninstaller etc...
Some of the other things I tried that did NOT work for me but MAY WORK for you are as follows, what ultimately worked for me was step C and all sub sections of, I might start there but I am writing this in order of things I tried.
Solution A) un/re registering vbscript.dll (in c:windows\system32) to no avail…click start, run cmd prompt (should open as admin),
1. Start à Accessories à right-click Command Prompt and select Run as Administrator. A Windows Elevation confirmation screen will pop up. Confirm the action OR alternatively just run CMD from Start àrun à cmd and it should run as admin
2. The Command Administrator Prompt opens to something like the following- C:\Windows\system32>. If anything else change directory by typing this without quotes: “cd\windows\system32”
1)     Now at the command prompt, which should be- C:\Windows\system32 unregister the vbscript.dll file from Windows by typing at the command prompt (without quotes) “regsvc32 /u vbscript32.dll” (This will un-register the VB Script dll with your computer. A confirmation window will appear after this)
2)     Now we want to register it C:\Windows\system32 regsvr32 vbscript.dll (This registers VB Script with your computer -- a confirmation window will appear after this as well.)
3)     Try rebooting and running your blackberry software install
Solution B) Everything on this site : This Blackbery Forum Post (great post, thanks! Hey, you might learn something here that will come in handy one day if it doesn’t help you now, I did)
Follow each step there, try rebooting and running your blackberry software install as indicated
Solution B.Longshot) If A and B don’t work, you can try a repair of vista using the recover cd (if you don’t have one go here: neoSmart (I downloaded and burned image with aShampoo dvd burning software, restart windows with DVD/CD in the drive, press F12 on boot (or whatever gets YOU into ‘setup’, not the BIOS, change boot first device to CD/DVD ROM. I used this and it works perfectly, just follow their directions on the site and pick the right version for your OS etc) be *VERY*CAREFUL to NOT wipe your drive and just do a REPAIR (can take an hour), again if you don’t know what you are doing, skip this one and move on.
What DID WORK for ME, is the following (SORRY FOR THE CAPS BUT THIS IS IMPORTANT *** DO NOT ASSUME THAT USING AN UNINSTALLER LIKE REVO WILL DO ALL OF THIS FOR YOU - THIS WAS MY MISTAKE from the beginning, 25 hours later I realized that YOU NEED TO DO THE UNINSTALL AND SOME MANUAL STEPS EVEN IF YOU SELECT THE MOST THOROUGH***)
This one, D, worked for me specifically:
Solution D) Uninstall the BlackBerry Desktop Software, preferably using REVO UNINSTALLER go: HERE to get Revo (CNET)
Use the Advanced uninstall option, thorough option, the last one down the list, this will notonly use blackberry’s built in uninstaller, but scan for remnants of the software on your drive and registry
When prompted select all and delete everything it finds, do not skip any steps, reboot, try re-installing the blackberry desktop software
You could try a similar type of uninstaller if you have one; however, I don’t recommend leaving it to using the control panel add/remove programs, I did not try this with that method
Solution D part 2) Once you have uninstalled and rebooted
- Delete the Research In Motion Folders from the hard drive AND Registry
Browse to C:\program files\Research in Motion, delete this folder
Click Start à Run.
Type Regedit, and then click OK. (Please be careful here, only do this if you have a good idea what you are doing, you can really mess things up here, go slow carefully please please please)
In Registry Editor, delete the Research In Motion folder located at HKEY_CURRENT_USER\Software\
Delete the Research In Motion folder located at HKEY_LOCAL_MACHINE\Software\   (This key will supposedly be missing if you are removing Desktop Manager version 4.0)
Reboot, reinstall the Blackberry Software, issue SHOULD HOPEFULLY be resolved!! So there you have it. I am 99% sure one of those things will get you back on your feet....good luck,
Good luck
I can be reached at 6packs at live dot com if you spot an error I can fix, otherwise please post to the forums!

Blackberry Desktop Software and 9800 Torch

I attached my cellphone to my PC and I see it charging. I open Blackberrry Desktop Software but it acts like I need to connect my cellphone even though it is already connected. What do I have to do to get the software to recognize my 9800 Torch ?

Hi and Welcome to the Community!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Desktop software crashes when I connect Bold via USB cable

I start version 5.0 of Blackberry Desktop Software. All the icons come up. I then plug in my Bold, the desktop software picks up the PIN number, and then I get the window that says Desktop software has stopped working and will shut down.
I found the instructions for a clean uninstall of the desktop software. I followed them and then reinstalled Desktop manager. No change in the problem.
Desktop software was working just fine until I got a nasty virus. I ended up installing a disk image from several months prior to get rid of it. Ever sense the new image, I can't get the desktop software to work.
Any suggestions? Thanks.

I visited that link a couple of times, but it hasn't been of much use because the thing about my problem is that my phone is connecting and disconnecting rapidly, but works with other laptops with the same usb cable just fine, also if I connect another USB cable such as my hard drive it works great. What I don't get is why does my phone connect to other computers with the same USB cable well but not mine, and when I connect something else to my computer it works just fine too. What can I do now?

Blackberry Desktop Software slows down Network Connectivity on Win 7 start up

Similar Messages

Maybe you are looking for