Blackberry Desktop Software Version 6.1.036 now receiving Connector Specific Error when sync Calendar

I have a Blackberry Bold 9930 that has software version 7.1 bundle 457 and my desktop software is listed above, today when I tried to sync my calendar it is giving me the error Connector Specific Error, and won't sync.  What am I doing wrong?  Thank you! 

I have the same problem and have tried one way sync's, deleting and re-entering the calendar entries made around the time the problem started. If it is a corrupted entry, I can't find it.

Similar Messages

  • Receiving "Connector Specific Error" When trying to Sync 8310 w/ Desktop Manager

    I've had my phone for over a year, and never had any issues until this morning, in the middle of syncronizing (when it was trying to read the contents of my device calendar), it just stops, and says "Connector Specific Error" and the syncronization ends. I tried updating my software to the newest version, because I was using 4.5, but even after I removed 4.5, and installed 4.7, I got the same error.
    HELP!!!
    Joe
    EDIT: Removed personal information
    Message Edited by Andy on 12-06-2008 06:34 AM
    Solved!
    Go to Solution.

    According to this KB article, one of the databases (calendar, address book, tasks, memopad) being synced has gotten corrupted.
    http://www.blackberry.com/btsc/KB15294
    Which one does it stop syncing on?
    You probably will have to end up clearing the database. First use the Backup and Restore utility to make a complete backup of your data. Then go into Backup and Restore | Advanced. Select the database that's corrupt on the right side and hit the Clear button. Doing so will erase all the entries in that database.
    Try doing a sync afterwards and see if it goes through ok.
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • "Connector Specific Error" when synchronizing with BlackBerry Desktop Software

    Hi
    i have a connector specific error when I synchronise my contact.
    that's my iloptcfg.cfg
    [General]
    ErrLogMaxSize=500000
    ErrLogBackups=0
    TraceDetail=0
    TraceLog=0
    UseNtEventLog=1
    UseThreadIDLogFileNames=0
    AttendeeDisplayNameOnly=0
    [ilwin]
    HeapLogging=0
    MultiJobTraceLog=1
    EngineTracing=799
    ILXflags=0
    TranslatorLogVerbosity=0
    SingleSessionXlateLogs=0
    ILTRflags=0
    TifLog=0
    LoggingFilter=0
    ILLOGflags=0
    DirectionForRecurringRemove=0
    AutoCleanse=1
    HistoryFileCompression=0
    AllowTwoTierHistoryFiles=0
    XlateLogBackups=0
    HistoryFileBackups=1
    [CAAR Options - Contact]
    Add Empty KF Records=0
    Perform Email Matching=0
    and my PtTrace.log
    Sat Jun 05 00:38:41 2010 -- Intellisync Log File --
    Sat Jun 05 00:38:41 2010: Error Failed to retrieve field on the device.4238 at RIM:eviceIConnector.cpp line 1415
    Sat Jun 05 00:38:41 2010: Error 4.4 at .\sdk_data.cpp line 3846
    Sat Jun 05 00:38:41 2010: Error 4238.4087 at .\ciltrans.cpp line 1077
    thank yo for your help

    Hi and welcome to the forums!
    Here is an article on how to resolve the problem.
    Thanks,
    Bifocals
    http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Bold 9700 won't let me sync with Windows 7 computer using BlackBerry Desktop Software version 6

    I just got a new computer with Windows 7.  I installed version 6 of BlackBerry Desktop Software.  It installed just fine.  When I connect my Bold 9700 to it the software recognizes the phone and has the list of model, PIN, and phone number.  It allows me to backup the device - but not sync it.
    I went to configure my sync settings.  It goes to the screen for me to set the sync options for calendar, memo pad, etc.  I selected calendar.  It asks me which application I'm using and I select Microsoft Outlook (I'm using Outlook 2010).  I choose 2 way sync.  So, up to this point it's working correctly.  But, then when I hit "next" on this screen it gives me an error message - the operation terminated unexpectedly.  I have no clue what's going on.

    I have the same problem and have tried one way sync's, deleting and re-entering the calendar entries made around the time the problem started. If it is a corrupted entry, I can't find it.

  • Blackberry Desktop Software version 7 Synchronization Error

    I get the following error while synchronizing my Outlook calendar
    "CRRecurringl:: SetRecurringDates: Start date is invalid".
    I did not have any problems synchronizing prior to upgrading Blackberry Desktop to version 7.

    I had the same problem.  This is what I found out and how to fix it.  Tech Support at RIM walked me through it though it took awhile.
    From browsing online, it seems this problem occurs when you change from two way sync in the Desktop Software to one way, then change back to two way.  To fix it, you need to first make sure you have all of your information current in Outlook.  Then, go into the Desktop Software and under Device choose Delete Data.  You can then Select Data and choose only Calendar.  After that is done, do another sync, and everything should be okay.

  • Can't download Blackberry Desktop Software Version 6.0.1?

    Hi,
    I've just got a Blackberry Bold 9900, but only have Windows XP SP2 so cannot download 6.1.  When I select the download earlier versions section and go to download 6.0.1 it still brings up the page to download 6.1!
    How do I get around this?
    Thanks,
    Paul

    Hi Paul and welcome to the BlackBerry Support Community Forums!
    Older versions of the BlackBerry® Desktop Software are not available for download.  BlackBerry® Desktop Software 6.1 requires Windows® XP Service Pack 3.  You can obtain Service Pack 3 by installing the latest Windows® updates.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Problems synchronization Blackberry desktop software version 6.0.0.40

    Today I installed the latest version of the Blackberry desktop software, 6.0.0.40 on my desktop, latest MS Vista version. After I connected my Blackberry bold 9000 via USB, the system automatically made a backup. That's fine ofcourse. But when I want to verify the synchronization parameters, the system gives an "unknown error" and don't allow me to change the parameters because of that error. I can't click one of the four given synchronization aps, the system doesn't allow it and comes with the error mentioned before. I checked for a newer version of the desktop software, but I have the latest version.
    Who can give me a good advice to solve this?
    Bernard, Holland, Europe.

    I have the same problem and am still waiting on a solution from RIM , and may end up switching form Blackberry because of it. I use win 7, latest DM6, BBerry Tour with latest Verizon updates, and Outlook 2010. I have un-installed and reinstalled DM6 multiple times, using every clean un-install protocol here. I STILL get "Intellysinc error" when I try to change the sync parameters as you've said, crashing DM6. I haven't been able to sync since at least May- it is ABSURD THAT RIM DOESTN CARE ABOUT BUSINESS USERS anymore, leaving us with outlook 2010 high and dry all these months. I will be switching to Droid in a week if RIM doesn't solve this !
    Gregory
    Gregory S Pokrywka MD, FACP
    Prevention of Cardiovascular Disease and Women’s Menopausal Health
    Assistant Professor of Medicine
    Johns Hopkins University School of Medicine
    Inaugural Diplomate American Board Clinical Lipidology
    Certified Menopause Practitioner: North American Menopause Society
    Director: Baltimore Lipid Center

  • Windows XP gives message "BlackBerry Desktop Software has encountered a problem and needs to close." when trying to start Desktop Manager

    I apologize if this issue has already been handled in others' posts; I just can't locate my specific issue, and I'm a newbie with this.
    I first encountered the Windows crash shown in subject yesterday when trying to sync my Blackberry. Message is displayed after the program churns for awhile, but hasn't even detected a remote device or shown that it is doing any work.
    I vaguely recall agreeing to an update a few days back.  Perhaps Windows has updated recently as well? 
    I have uninstalled and installed most recent Desktop version several times, rebooting in between.  I have tried installing original version as well - Desktop at least starts then, but bombs before syncing anything.  I also have rolled back my Windows system to before last Windows update.
    Here is the error message that I believe is associated with this problem:
    Sunday, December 26, 2010
    .NET Runtime 2.0 Error Reporting
    EventType clr20r3, P1 rim.desktop.exe, P2 6.0.1.18, P3 4cfdab9c, P4 microsoft.practices.composite, P5 2.0.1.0, P6 4c58abaf, P7 12b, P8 50, P9 sclhiaanmqhkf4zdfpvvwejkphn1z uj, P10 NIL.
    Thanks in advance for any help you can provide.

    Bold 9650 running on Windows XP
    I finally solved my problem with blackberry desktop manager 6.0.1 by going bck to 6.0 version and here is how I did it, since the 6.0 version is not available on blackberry's website or on a disk and I have spent over 30 hours with BB tech support all to no avail in fixing 6.0.1 and enabling it to open.
    1) Removed any Blackberry desktop software from my computer via the  add/remove program in the control panel.  No need to deal with a clean uninstall in terms of registry cleaner, etc.
    2) Installed 6.0 which i was lucky enough to have backed up the intallation files from several months ago when I backed up my entire system to an external drive. 
    3) Opened BB desktop mananager and connected my device and configured my sysn with outlook and all worked out. 
    If anyone needs BB Desktop Manager 6.0 to go back to a version that once worked for you, please let me know and I will email it to you via yousendit.com since it is a 95mb file.
    -Marty

  • Blackberry Desktop Software has stopped working

    Blackberry Torch 9850 on the Verizon Wireless Network
    Blackberry OS: 7.1 Bundle 1737 (v 7.1.0.580, Platform 5.1.0.429)
    Windows 7 Home Premium, SP11 with an full admin account
    HP Desktop computer
    For some unknown reason whenever I attempt to execute Blackberry Desktop Software version 7.1 the application returns the following error: "Blackberry Desktop Software has stopped working: A problem caused the program and notify you if a solution is available." The last successful use of DM was on Sunday, October 7, 2012 when I synched my phone and did a backup of the device.
    I have uninstalled and re-installed the application; uninstalled Microsoft .Net Framework version 3.5 and 4.0 then re-installed .Net Framework; then re-installed DM under a new admin account and still getting the same problem. I even went as far as uninstalling Office and re-installing office and still getting the same problem. Whenever I uninstalled DM I did a manual uninstall where I removed all registry keys associated with Research in Motion including folders and still getting the same problem. I Googled the error and the articles worth reading I have already the things they mentioned.
    NOTE: I have done a lot more troubleshooting that is listed. But since I did so much to get this to work it will take me an entire novel to list all the things I have done to get this app to work again.
    Called VZW and they got me in contact with RIM. RIM did pretty much the same things I did and after spending 7 hours on the phone with them they concluded I need to reformat my drive. When the tech made that suggested I wanted to reach thru the phone and knock her teach out of her mouth. Suffice to say I am not able to get DM to work on my machine and there appears to be no apparent reason why the software will stop working. Not have DM work means I cannot synch my phone. I have one personal computer and I am not going to install DM on my laptop because it will do me no good since I need to synch it with Outlook which is on my personal desktop. I cannot install my personal copy of office on my work laptop because it will probably cause other issues.
    Anyone have any suggestions how I can get this application working on my desktop. It was working before and all of a sudden it stopped  working

    http://www.blackberry.com/btsc/KB02206
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Synchronize my Address Book using desktop Software Version 6.0 with the BlackBerry 8900

     Everytime I try to Synchronize my Address Book with the BlackBerry 89000 using desktop Software Version 6.0 it crashes. I try doing task and calendar they work just fine, just on the address book it seems to crash anyone else has this problem? Desktop 6.0 phone software 5.0

    Hiya!
     Please be a little more specific.
    What do you mean by crashes? Does your entire system shut down? do you get any error codes?
    Thanks!
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • Desktop Software version 5 phase out

    As last week i still can download the Blackberry Desktop Software version 5 at  'download' page of blackberry http://us.blackberry.com/apps-software/desktop/. But now i needed to go to 'service provider page' http://us.blackberry.com/support/downloads/downloa​d_sites.jsp to download. As i still needed to use version 5 to sync. the blackberry data to Outlook 2000 which not support at version 6.
    so just wonder if blackberry will soon phase out this version? Thank

    That's what it looks like!
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Curve 8900 not connecting to Desktop Software version 6.0.0.40

    I am not able to connect my Curve 8900 to the BlackBerry Desktop Software Version 6.0.0.40.  When I connect via USB it asks for the password  and then it says connecting in the bottom right corner - it never connects.  I also have the Blackberry Device Manager version 6.0.0.11 running at startup but it does say that the device is connected.  There are no errors in the device manager.  I am running Windows XP SP3.

    No one else replied, but I seem to have solved the problem, more or less, so I thought I'd report back.  See previous message for the setup.
    1) First attack - make a concerted effort to truly undelete the 2 old versions of Desktop Manager.  The typical list of "how to cleanly uninstall" (link above) is incomplete.  This document is much better: http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206 . 
    The part that matters is near the bottom, under Additional Information.  Basically, take a shovel to the Registry and start digging out absolutely every reference to "Research In Motion" using the Edit/Find.  I added to that recommendation a search on "BlackBerry" and even, for good measure, all the Roxio software (and removed the Roxio folders just like the Research In Motion folders).  I can't say which part did the trick, but I could see some of the Install and Uninstall list items go by.
    This finally killed the zombie entries in the Add/Remove Programs list, and prevented the Windows Installer attempts on unfindable .msi files.
    2) Problems: In killing Roxio, I may have accidentally munged a Sonic registry entry.  When I installed the Desktop Manager fresh from the CD, it complained about a registry-style confusion with Sonic software.  It allowed me to continue past that point anyway.
    I can't fix that, but I will be swapping in new PCs in a couple of months and can live with whatever reduced functionality might be involved.
    When I started the Desktop Manager for the first time, I could see Windows Installer popups fly by in the background, but none of them stayed open, and perhaps that will be a one-time problem.  Otherwise, if related to the Sonic issue, at least it's not a functional problem that prevents me from using the Desktop Manager.
    3) I can now connect to the Desktop Manager via USB, but am unable to successfully update the device software.  It goes through the backup process apparently successfully, but issues an error message about "Fatal error" before installing much (any?) of the new software.  Seems to be a benigh error - phone still works.  Because this will be reinstalled on a clean PC in a couple of months, I can pass on upgrading the device software until then.
    4) All I care about is the ability to synch the contact and calendar data and, by god, that seems to be working!!!  And it's much faster than my older BB.
    If you're reading this, it's because you have an ongoing nightmare...  You have my sympathy. 

  • Blackberry desktop software doesn't connect with address book

    blackberry desktop software version 2.4.0 doesn't connect with address book on a mac os lion (10.7.4). Sync contacts not possible. Use a BB 9500 v5.0.0.841 (plateform 4.2.0.380). Any solution ?

    You have both Desktop Software and Link set to open when a device is connected to your Mac. You need to go to the settings of Desktop Software (I don't recall exactly what to do but there should be some settings in the top right corner) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that Link is set to open. That should resolve your issue.
    Let us know if that helps you.
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • BlackBerry Desktop Software installs but then fails to open

    Purchased BlackBerry today.
    BlackBerry Desktop Software installs from distribution disc but then fails to open. Can see it in Windows Task Manager>Processes, as follows:
    Windows Task Manager>Processes  
    Image Name: DesktopMge.exe CPU: 00 Mem Usage: 7,764 K
    Windows Task Manager>Applications
    Not listed!
    I UNISTALLED previous installation of BlackBerry Desktop Software, including user settings.
    Downloaded and installed the installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, but with same result. Uninstalled it, too.
    As suggest elsewhere in this forum, I made directory as follows: C:\INSTALL\Blackberry
    Then extracted the downloaded installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, into it.
    Then started installation by clicking on “BlackBerrySetup.exe”.
    However, the result is the same, as described above. BlackBerry Desktop Software installs but then fails to open.
    Any help would be appreciated. I would like to make this software work.
    Is there alternative software available?
    Solved!
    Go to Solution.

    http://supportforums.blackberry.com/rim/board/mess​age?board.id=BlackBerryDesktopSoftware&thread.id=3​...
    HOWTO : use your blackberry as a USB device
    and then install the Desktop Manager as administrator.
    and use it as administrator too.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Error when trying to configure sync between Outlook 2003 and Blackberry Desktop Software 4.6

    I am unable to configure the Blackberry Desktop Software (version 4.6) to sync with my Outlook 2003.  I used to have an older version of the desktop software and it worked just fine.  I got a new phone and updated the software and am unable to configure the sync.  I get the following message when I try to configure it: "Runtime Error: folder is no longer part of the system data source or the folder could not be found."
    Please help.  I need these to sync.

    HI and Welcome to the Forums!
    I suggest trying a clean DTM uninstall:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    followed by reinstalling from scratch. You should be able to go to the latest v5.0 with Outlook 2003...it's available here:
    http://na.blackberry.com/eng/services/desktop/#tab_tab_overview
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Macbook Pro 13" Mid 2010 random shutdowns

    MacbookPro 13" Mid 2010 2.4 GHz Intel Core 2 Duo 4 GB 1067 MHz DDR3 NVIDIA GeForce 320M 256 MB OS X 10.9.5 Recently my Mac has been shutting down randomly. It does this whether the power adapter is plugged in or just running on battery, and there are

  • N95 Screen blinks every 20 to 30 seconds!! plz hel...

    hi , my N95's screen Started blinking from now whenever i use N95 or its functions it Screens Blinks well after 15-20-30 seconds and its bad do any one of u know abt it? plz help me out am Worried its a brand new N95 i even formatted my entire N95 me

  • Creating a dynamic where clause

    hello, I am trying to create a procedure whech needs to parse a dynamic where clause into a cursor. The problem is I do not know the number of items that the user has selected (from previous input), thus what I want to pass in is a string of variable

  • Loan table related query wat r the table for loan related

    Hi , Can anybody tell me the tablename and field name for 'loan start date" and "monthly payment".It shoulb be connected to VKONT form table fkkvkp.I have tp pass this vkont(contract account number and on the basis of it have to find the loan start d

  • Migration of Informix Database to Oracle

    I'm currently looking for a migrationtool to migrate an Informix Database running with SAP R/3 applikation to a oracke database running under SAP R/3. Is the Oracle Migration Workbench able to handle such a request. Thanks in advanced Cheers Chris nu