Blackberry Desktop Software wont download

I have tried several times with the desktop software for pc and the media sync but it just wont get past 4
Any ideas?

Hmmm...OK...so you are trying to download, from the official download portal, the RIM Desktop Software, and it is only getting through to 4% in the download process, and is not completing and proceeding into the install process. Do I have that right?
If so, the reasons could be quite wide ranging. Your computer could be locking up. Your local network could be locking up. Your internet connection could be clogged. The internet itself could be sluggish. The RIM site could be bogged down. Determining which of these is a network diagnostic challenge...
Basically, if other downloads from other sources work fine for you, then I'd say keep trying. If no downloads are working for you, then you'd need to look at all of the non-RIM related possible causes.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • BlackBerry Desktop Software Is their a download for Mac desktop Os 10.5.8

    Hi
    I was wondering if their is an archive within Blackberry where I could download a BlackBerry Desktop Software for my mac. I am useing 10.5.8, the new version is for 10.6 or higher.
    Regards
    Vintage Tec head 8088

    This subject has been discussed on the forum already.
    No earlier versions of the MAC desktop software for reasons unknown to us.
    Indeed PC versions can be retrieved somewhere, I guess, but not for the Mac.
    Only a possible reader of this forum could offer you his file if still an older version in his archive folders or something similar.
    Fingers crossed
    Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

  • BLACKBERRY DESKTOP SOFTWARE 7.1 WONT COMPLETE INSTALLATI​ON

    I use windows 7 32bit.. the problem i'm having is BlackBerry desktop software 7.1 won't finish installing.. a pop-up keeps coming up wen it's almost finished installing. the pop-up says "Error 1723. There is a problem with this windows installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action RepairRimUsbDriverNT.191E20C_5A62_43E3_B035..." .... all this started wen I tried to upgrade from my previously installed 6.0 desktop software from the blackberry.com site... the upgrade failed and I started having issues.. I uninstalled 6.0 but it wouldn't unintal fully.. so I deleted all RIM Folders from registry and all and downloaded d 7.1 desktop software from blackberry.com but it won't finish installing... Pls Pls pls... some one help me sort this out.

    Well I did not as I only have this vista on my laptop moreover, it was working fine earlier probably the older version n after the update it stopped working somehow. I have tried number of times to install and uninstall and reinstall with even deactivating my antivirus and user controls and ran as adminisitrator also but to no good.

  • Can't install downloaded Blackberry Desktop software

    I downloaded the latest version of the BB 8100 desktop software from the BB site to my computer. It unzips OK but when it starts to install it stops every time. Have exited every Windows program first.  Any ideas? 

    Problem:
    Similar but not the same as errors 2738 1607 encountered with installing blackberry desktop manager software, there is no error message here, simply the WinZip Self Extractor completes, then the Installshield Wizard opens and appears to be installing.  After several seconds, a BlackBerry window opens (BlackBerry Desktop Software - Installshield Wizard) with the message: "The wizard was interrupted before the BlackBerry Desktop Software could be completely installed. Your system has not been modified. To complete installation at another time, please run setup again.    Click Finish to exit the wizard.
    Solution(s)
    Ok, saw this thread was un answered so I thought I would reply in case anyone out there has this issue too, it drove me mental for a week too.  (before you read on I am not responsible for any messed up computers, blackberries or anything at all! This  is a GUIDE that worked for me and not the law!) So, here we go… I tried many many things to fix this, I am on Vista home, berry 9700 bold 2, TELUS Mobility (doesn’t really matter), Blackberry handheld OS 5.0, Vista Desktop Manager 5.0.1. English without media manager/roxio w/Sp1 downloaded from blackberry. I tried just about everything you can imagine, know my way around computers reasonably well (or so my mom tells me haha) and uninstalled the previous version of desktop manager with REVO uninstaller etc...
    Some of the other things I tried that did NOT work for me but MAY WORK for you are as follows, what ultimately worked for me was step C and all sub sections of, I might start there but I am writing this in order of things I tried.
    Solution A) un/re registering vbscript.dll (in c:windows\system32) to no avail…click start, run cmd prompt (should open as admin),
    1. Start à Accessories à right-click Command Prompt and select Run as Administrator. A Windows Elevation confirmation screen will pop up. Confirm the action OR alternatively just run CMD from Start àrun à cmd and it should run as admin
    2. The Command Administrator Prompt opens to something like the following- C:\Windows\system32>. If anything else change directory by typing this without quotes: “cd\windows\system32”  
    1)     Now at the command prompt, which should be- C:\Windows\system32  unregister the vbscript.dll file from Windows by typing at the command prompt (without quotes) “regsvc32 /u vbscript32.dll” (This will un-register the VB Script dll with your computer. A confirmation window will appear after this)
    2)     Now we want to register it C:\Windows\system32 regsvr32 vbscript.dll (This registers VB Script with your computer -- a confirmation window will appear after this as well.)
    3)     Try rebooting and running your blackberry software install
    Solution B) Everything on this site : This Blackbery Forum Post (great post, thanks! Hey, you might learn something here that will come in handy one day if it doesn’t help you now, I did)
    Follow each step there, try rebooting and running your blackberry software install as indicated
    Solution B.Longshot) If A and B don’t work, you can try a repair of vista using the recover cd (if you don’t have one go here: neoSmart (I downloaded and burned image with aShampoo dvd burning software, restart windows with DVD/CD in the drive, press F12 on boot (or whatever gets YOU into ‘setup’, not the BIOS, change boot first device to CD/DVD ROM. I used this and it works perfectly, just follow their directions on the site and pick the right version for your OS etc) be *VERY*CAREFUL to NOT wipe your drive and just do a REPAIR (can take an hour), again if you don’t know what you are doing, skip this one and move on.
    What DID WORK for ME, is the following (SORRY FOR THE CAPS BUT THIS IS IMPORTANT *** DO NOT ASSUME THAT USING AN UNINSTALLER LIKE REVO WILL DO ALL OF THIS FOR YOU - THIS WAS MY MISTAKE from the beginning, 25 hours later I realized that YOU NEED TO DO THE UNINSTALL AND SOME MANUAL STEPS EVEN IF YOU SELECT THE MOST THOROUGH***)
    This one, D, worked for me specifically:
    Solution D) Uninstall the BlackBerry Desktop Software, preferably using REVO UNINSTALLER  go:  HERE to get Revo (CNET)
    Use the Advanced uninstall option, thorough option, the last one down the list, this will notonly use blackberry’s built in uninstaller, but scan for remnants of the software on your drive and registry
    When prompted select all and delete everything it finds, do not skip any steps, reboot, try re-installing the blackberry desktop software
    You could try a similar type of uninstaller if you have one; however, I don’t recommend leaving it to using the control panel add/remove programs, I did not try this with that method
    Solution D part 2) Once you have uninstalled and rebooted
    - Delete the Research In Motion Folders from the hard drive AND Registry
    Browse to C:\program files\Research in Motion, delete this folder
    Click Start à Run.
    Type Regedit, and then click OK. (Please be careful here, only do this if you have a good idea what you are doing, you can really mess things up here, go slow carefully please please please)
    In Registry Editor, delete the Research In Motion folder located at HKEY_CURRENT_USER\Software\
    Delete the Research In Motion folder located at HKEY_LOCAL_MACHINE\Software\   (This key will supposedly be missing if you are removing Desktop Manager version 4.0)
    Reboot, reinstall the Blackberry Software, issue SHOULD HOPEFULLY be resolved!! So there you have it. I am 99% sure one of those things will get you back on your feet....good luck,
    Good luck
    I can be reached at 6packs at live dot com if you spot an error I can fix, otherwise please post to the forums!

  • Can't download Blackberry Desktop Software Version 6.0.1?

    Hi,
    I've just got a Blackberry Bold 9900, but only have Windows XP SP2 so cannot download 6.1.  When I select the download earlier versions section and go to download 6.0.1 it still brings up the page to download 6.1!
    How do I get around this?
    Thanks,
    Paul

    Hi Paul and welcome to the BlackBerry Support Community Forums!
    Older versions of the BlackBerry® Desktop Software are not available for download.  BlackBerry® Desktop Software 6.1 requires Windows® XP Service Pack 3.  You can obtain Service Pack 3 by installing the latest Windows® updates.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Blackberry Desktop Software (Roxio, specifical​ly) causes network problems and blue screens.

    I'm posting this note because I just solved my network issue/crash problems. I started experiencing lots of disconnects and page not found on my office computer over the past few days. Only thing I could think of that was different lately was that I installed the Blackberry Desktop Software. Then a huge lightbulb went on over my head. I remembered when it was installing, it said it was installing "Roxio" software and at that moment shivers went down my spine from past experiences.
         Well, I have lots of good "bad" experiences with Roxio CD software which had caused these same problems on two of my home computers. It caused blue screens when used in conjunction with my wireless Netgear card and also standard network card. The same symptoms including very slow internet access, general machine sluggishness, etc. I was trying to chase this down for months til I finally removed the Roxio crapware and ALL problems went away. No more slow machine, no more page not found and no more blue screens on two of my computers. Now, on a completely different Toshiba work laptop and different network adaptor, same problems.
         So, here we are again with Roxio as part of Blackberry Desktop software. I like my new Blackberrry 8830, but I have to pass this along to the Blackberry folks because I KNOW I'M RIGHT about this. I only installed the software so that I could type my contacts into Outlook and then download to my Blackberry. So, after realizing the common symptoms and after having completed my download (which worked great by the way), I removed the Blackberry Desktop Software and I'm back to speedy everything, no more pages not found, no more putty disconnects, and no more blue screens.
         I hope someone gets good use of this post because this drove me crazy the first time around.
    -- Jeff

    We had the same problem.
    We did extensive troubleshooting, and found the problem was effecting our new HP Windows XP .Laptops.
    We did not have any trouble with the Older Dell Latitude we have.
    We found the BSOD still happened after removing the Black Berry Desktop Manager Software.
    We traced it to a memroy / resource leak in the USB subsystem.
    The workaround we found is to go into the Device manager, and remove all the drivers from the USB section.
    ** Disclaimer :  This works for us, but may make your computer unusable.  Backup your data to external storage.
                   Back up your computer
                   Start -> control Panel -> system ->Hardware tab ->  Device manager.
                    Expand "Universal Serial Bus Controller"  at bottom of list.
                    Right click on each Item, and select "uninstall"
                    Don't reboot after each one.
                    * Remove ALL the entries under Universal Serial Bus Controllers *
                    Repeat until all the entries under  "Universe Serial Bus Controller" are removed
                    (there may be one that sticks, thats ok. so long as it has been uninstalled.
                Reboot.
                The OS will rebuild the USB stack and drivers to default.
    This has worked for us so far.
    We are not sure if this wont break something else.

  • Blackberry Desktop Software V6.0.2

    I just recently joined the RIM Blackberry family. I've installed the latest version of the Blackberry Desktop software, but am having trouble loading the program.
    I get a Windows error report...
    "BlackBerry Desktop Software has encountered a problem and needs to close. We are sorry for the inconvenience."
    Does anyone know what issues the program could be having? I've downloaded the program multiple times, re-installed, repaired, and tried to contact Blackberry. I'm incredibly frustrated. Anyone else having this issue, and possibly knows how to fix this?

    OK I FIND SOLUTION FROM FIRST TIME. I was in January already registered under nick name HONGKONG
    and here is solution what work first time. But now after DMupdate again DONT WORK.
    I had all the same problems as everyone else on this thread, but it was just as simple as renaming Rim.Desktop.Services.PolicyManager.dll to Rim.Desktop.Services.PolicyManager.dll.old and then back to Rim.Desktop.Services.PolicyManager.dll it worked.
    The file is located in:
    C:\Program Files\Research In Motion\BlackBerry Desktop\Modules\
    I can only say RIM, I never buy again BB units. Bye [keep it courteous please].

  • During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

    I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
    Issues 1) playbook wont connect to desktop manager anymore 
    2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account. 
    3) my Phone when connected to desk top software shows the calendar as read only
    4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies." 
    I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!! 
    someone please help me. !! 
    I know you are going to ask I have updated everything last time and it is all as update as it can get. 
    As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts 

    Did you try to eboot the your PC or laptop where your device is connected ?
    I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

  • Blackberry desktop software

    i downloaded the latest version of blackberry desktop software.   as far as i know everything went ok,
    however i clicked on the icon on my desktop because i wanted to update my bb,  and i couldnt go any further because the blackberry desktop software sign came up then i got the following message;
     Blackberry desktop software has encountered a problem and needs to close.
    ive installed the latest version twice   first time was because i got notified,  second time was because i uninstalled the program and downloaded it again.
    i am very upset because i want to see my bb  needs any updates

    Try doing a clean uninstall of the BlackBerry Desktop Software as shown here: http://bbry.lv/acVRkU Then reinstall. Make sure you are installing it in a Windows User Account with admin privileges. 
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • BlackBerry Desktop Software giving Error (not opening)

    I have purchased BlackBerry Curve 3G 9300 but,It's more than 4 times that I am getting error on BlackBerry Desktop Software. After installing it open the BlackBerry Desktop Software window with logo and then Error window popup saying that BlackBerry Desktop Software has encountered a problem and needs to close.  We are sorry for the inconvenience.
      After Click on the What data does this error report contain? It shows Error window
    Error Signature---------------------------------------------------------------------------------------------------------------------------------------
    EventType : clr20r3   P1 : rim.desktop.exe  P2 : 6.0.2.44    P3: 4db5e0d4
    P4 : microsoft.practices.composite  P5 : 2.0.1.0  P6 : 4db5def0
    P7 : 12b   P8:50  P9:sclhiaanmqhkf4zdfpvvwejkphnm1zui
    Reoprting details------------------------------------------------------------------------------------------------------------------------------------
    This error report includes: information regarding the condition of BlackBerry Desktop Software when the problem occurred;the operating system version and computer hardware in use; your Didital Product ID, which could be used to identify your license; and the Internet Protocol(IP)  address of your computer.
               kindly guide me.

    I am having the same problem I have reinstalled the software more times than I can count and now I cannot open the Icon on my desktop at all. This is beginning to be really frustrating can someone please help. I want to download my pictures from my phone to my computer unable to do that as well.
    Thanks.

  • Blackberry Desktop Software Failed to validate your blackberry device

    Blackberry 8310 was running slow.  The people at the ATT store said I need to update the software.  Downloaded the newest version to the desktop and when I tried to upload it to the phone received the following message
    "Blackberry Desktop Software Failed to validate your blackberry device update"
    "Aborting install due to validation failure.  Some packages contained unsatisfied dependencies"
    I am sure others have seen it.  What do I need to do.  Thanks  Mike

    Glad to hear.  I just did this again last night, and I think I've isolated the specific program that causes the problem, but I can't be sure. 
    I think it's "Documents To Go". 
    People might try deleting just that one program first in Options > Applications > Add-Ons if they didn't want to delete everything else too.  It's worth a shot.
    J

  • BlackBerry Desktop Software installs but then fails to open

    Purchased BlackBerry today.
    BlackBerry Desktop Software installs from distribution disc but then fails to open. Can see it in Windows Task Manager>Processes, as follows:
    Windows Task Manager>Processes  
    Image Name: DesktopMge.exe CPU: 00 Mem Usage: 7,764 K
    Windows Task Manager>Applications
    Not listed!
    I UNISTALLED previous installation of BlackBerry Desktop Software, including user settings.
    Downloaded and installed the installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, but with same result. Uninstalled it, too.
    As suggest elsewhere in this forum, I made directory as follows: C:\INSTALL\Blackberry
    Then extracted the downloaded installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, into it.
    Then started installation by clicking on “BlackBerrySetup.exe”.
    However, the result is the same, as described above. BlackBerry Desktop Software installs but then fails to open.
    Any help would be appreciated. I would like to make this software work.
    Is there alternative software available?
    Solved!
    Go to Solution.

    http://supportforums.blackberry.com/rim/board/mess​age?board.id=BlackBerryDesktopSoftware&thread.id=3​...
    HOWTO : use your blackberry as a USB device
    and then install the Desktop Manager as administrator.
    and use it as administrator too.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Blackberry Desktop Software for Mac won't open

    I've downloaded the Blackberry Desktop Software for Mac to begin synching my new Torch but when I try to launch the software, I get the following message.
    "The document “BlackBerry Desktop Software.mpkg” could not be opened. TextEdit cannot open files in the “Installer package” format."
    Has anyone encountered this and had any luck getting it to open?
    Any advice appreciated -- anxious to update my contacts and fully use my new phone!

    Hi choochoo2,
    Have you been able to try using a different USB port or to retry connecting after reinserting the BlackBerry battery? If so, try reinstalling the Desktop Software and retrying the connection.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Blackberry desktop manager wont detect blackberry

    i have looked everywhere for a solution to my problem and i simply cannot find a fix. my blackberry curve 8520 wont connect to my desktop manager. i have tried everything i could think of however nothing has proven successful.
    here is what i have so far done:
    -reinstalled desktop manager
    -installed latest update for desktop manager
    -installed drivers for blackberry
    -checked usb cable and ports
    -made sure desktop manager was set to usb
    -pulled the battery on the blackberry (power cycled)
    -restarted my computer
    i believe this is everythign i have currently tried, i am running 64x ultimate windows 7 and my computer does recognise that a blackberry is put in as everytime i do so a ballon at the bottom om my screen says a blackberry has been detected and gives it a drive name and such. it is also charging which ensures enough power is being delievered to the blackberry. i do not have another computer to try the desktop manager on. if anyone has a fix to this issue please respond asap as help would be very much appreciated.

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting articles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-​Desktop-Software/Tips-for-getting-BlackBerry-Deskt​...
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    http://supportforums.blackberry.com/t5/BlackBerry-​Desktop-Software/Desktop-Manager-quot-disconnected​...
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry desktop manager Wont install On my Macbook Air

    Hi, Ive got a 2011 13' Macbook air, i7processor 4ghz etc
    Ive ben trying to instal the bbdm on it for some time. When I download the software and try to open it i get a terminal screen whith the hading Blackberry Desktop software.mpkg --Bash-- 80x24
    Any help would be appreciated
    Thanks

    Please note that I am using Blackberry Desktop Manager 6 under Windows 7 Professional OS under Virtual Machine(Vmware Fusion 3.1.3). I use to do Certificate Sync from Windows Internet Explorer to Blackberry Device. How do I acheive this thru Blackberry Desktop Manager for Mac.
    Thanks

Maybe you are looking for

  • Hyperlinks in 11g (11.1.1.7)

    I'm reposting a post from 2 years ago because, as far as I can tell, there is no solution. I'd like to know if anyone has successfully implemented hyperlinks in BIP 11g. Can anyone share the method of calling a BIP 11g report from a hyperlink in an R

  • ITunes keeps creating duplicate m4p files for existing m4a files

    I noticed in 10.0 that I had duplicates of many of my purchased music, an m4a and an m4p. I tried removing the m4p files through iTunes, and through Finder. I have used the Display Exact Duplicate to identify some of them and then removed them. But a

  • HT4636 i can veiw a ppt file included in an e-mail on i pad but it will not open in i mac???

    Can anyone advise me how I can print an e-mail attatchment in ppt file format that i can veiw on i pad but not on i mac please? Instructions need to be in idiot proof form lol, many thanks

  • Alternative for GUI_GET_REGVALUE ??

    I noticed that GUI_GET_REGVALUE is set to obsolete. so I try to avoid using this function if there is an alternative at hand. I only have the problem that when I use the registry_get_value in a programm which controls the printpreview from me22n that

  • Log an analog channel and counter period channel to hard disk simultaneously

    We are in a rush, and need to log one analog channel and one counter period measurement to disk simultaneoulsy using card controlled timing and set # of samples. Should be easy, but can't figure it out. Labview 6.1 we have & DAQ 6013E we just bought.