Blackberry device time is changing whenever the device reboots by itself

i have encountered it numerous times that my bb9860 will reboot by itself and will notice that the device time would somehow be on year 2037 or even more advance.
that solution that i apply for this is to delete the sms messages and do the basic of pulling out the battery and put it back again...then it will work but after some time same issue will happen again.
hope there's a way for this not to happen anymore.

Try re-installing your device software.
Read this:
Http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB11320&sliceId=2&cmd=displayKC&d...
Good luck..
Click " Like " if you want to Thank someone. If Problem is resolved accept it as a "Solution ", so that others can make use of it.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Similar Messages

  • Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

    I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
    - Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
      this, after normal behavior for more than a year since purchase of the iPod.
    - Different podcasts have been affected at different times, after changes in the state of the iPod.
    - Only podcasts are affected.
    - This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
    - The only change to iTunes, the Mac, or the iPod is that just before this condition began
      I’d begun syncing an iPhone via iTunes.
    I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
    I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
    So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
    By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
    As I said,  this involves only podcasts. All other content on the iPod does appear in iTunes.

    I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
    Need Help!!!

  • Time keeps changing whenever I sync my Ipod to my laptop (itunes)

    The time in my iPod keeps on changing whenever I sync my device to itunes in my laptop. Can someone please help?

    Hi guys, I have a iphone 3gs 16gb but nomatter how many times i set the time and time zone on my phone, when i next plug it into itunes 10 it knocks the clock 8 hours forward. I've even set the time on my ipone while connected to itunes rhen synced it, but the next time i connnect it it knocks it 8 hours forward again and again and again. The same thing happens when i turn on the auto function by the same amount of time, wether connected to itunes or not. My PC is set at the right time and zone and im more than frustrated with this problem. My wife has the exact same iphone as me and on the same network but does not have this issue and all our setting are the same just incase it was something i was doing wrong on mine but to no avail.
    Please can someone give a definitive answer to this annoying problem

  • Time Machine crashes whenever the computer goes to sleep or into screen saver mode.

    Apologies if there is an obvious answer or post about this.  Every time I try to initialize Time Machine, it will begin backing up until the computer goes to sleep or the screen saver kicks in.  When I wake the computer up, I get a message that says "The backup was not performed because an error occurred while copying files to the backup disk."  The message also tells me that the problem might be temporary and to try Disk Utility to repair the backup disk if the problem persists.
    When I run Disk Utility, I am told that the volume cannot be repaired and that it needs to be reformatted.  I reformat the disk, try to run Time Machine again, and get the same problem whenever the computer goes to sleep or into screen saver mode.  Lather, rinse, repeat.
    I managed to get an initial backup only if I turned off the screen saver and the sleep function.  However, once I turned them back on, I ran into the same problem when Time Machine tried to update the backup.
    I am running OS X v.10.6.8 on an iMac5,1.  The backup is a Toshiba 1TB USB external HD. I saw this same problem posted in the Lion forum (and I cribbed the title of this post from there).  Nobody has offered a solution yet, but it was a very recent post.
    Thanks in advance.

    Oh yeah I forgot to say I use an ETHERNET connection.

  • My ipod nano is fully charged (I believe) but every time i disconnect from the computer it turns itself off

    My ipod nano is fully charged (I believe) but every time i disconnect from the computer the screen just shuts down and nothing happens. Occasionally it might work but the battery is already as low as it can go and turns it self off. What should i do?

    So the iPod only powers on when connected to an external power source such as a USB port on your PC or when connected to a wall charger?  If so, that is a very good indication that your iPod's battery is shot and in need of replacement.
    Apple can swap it out for a flat fee or you can send it to a third party repair service for a bit less.
    B-rock

  • Mounting name of time capsule changes all the time...

    I, since I pluged my TC, its mounting name (/volumes/times capsule/) is always changing with -1, -2... etc. (ex: /volumes/times capsule-3/)
    So, all my apps seted to store files on /volumes/time capsule/ can't work!
    How can I fix this?
    thanks

    Here is a suggestion and it should remove all the extra names, although it won't solve the issue from happening again. So I would suggest watching for when it does happen - what you were doing, error messages that came up, etc. I've read several posts about this issue, but no one seems to have found a definitive fix.
    From a Finder window (or the desktop), eject the backup disk image and then eject the Time Capsule disk. Open a Finder window (if not already open) and from the "Go" menu and select "Go to folder...". Enter /Volumes. In the next window you should see and be able to delete all the excess Time Capsule names (Time Capsule-1, Time Capsule-2, etc).
    I would then suggest checking the 'sparsebundle' image for corruption using Disk Utility. To get the image to show in Disk Utility, you need to navigate to the Time Capsule disk using Finder and locate the sparsebundle and then drag it into the Disk Utility left hand sidebar and then you can verify and repair the disk (if necessary).
    Hope this helps.

  • IPhone 5  time setting change automatically

    i have iPhone 5 my time setting change all the time and the network cut and back gain what the problem ? how i can repair it

    Vzw does not control the voice mail system for iPhones, apple does . Voice your complaint to them

  • Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"

    Updated iPad 1 to IOS 5. When trying to restore my iPad from my backup it gets half way through and the iPad reboots and iTunes says "An error occurred while restoring this iPad (-1)"
    I have tried to restore my contacts and company data at least 20 times and every time half way through THE iPAD REBOOTS! When it boots back up it is at the brand new iPad screen.
    This makes me angry as I do not use the iPad for fun and games. I use it for business. My company data and records for the last year are gone. ALL of my out standing customer invoices are gone. ALL payments received are gone! ALL Business contacts and emails ARE GONE! All my company, personal email accounts and settings ARE GONE!
    What am I supposed to do now? In 6 hours I have to get on the road and conduct business with a empty blank factory out of the box iPad. How am I supposed to know who owes me money or who has paid their bills Apple? All of my meetings and calendar dates are GONE!
    Everything was supposed to be backed up and restored after the update!
    Question???WHY DID YOU MAKE THIS UPDATE WIPE OUT ALL SETTINGS AND APPS ON THE iPAD??? All the other updates left everything on the iPad intact and ONLY upgraded the IOS,and when it was done everything was still there.
    Yes! I have done everything. Rebooted computer, checked for updates, Hard booted iPad, Factory restored iPad to ios 5 twice, tried every usb port I have, unplugged all other usb components.
    Everytime half way through "Restoring iPad from backup..." The iPad turns off shows a spinning circle then shows the Apple logo and takes me to the brand new iPad setup screen.
    Apple, you have no idea the level of stress you have created today.....

    Check the console app to see if there are any error messages. I had one app showing an issue (Pet Hotel) the error was (truncated):
    ERROR: Restore message response: 102 rename error: File name too long (63) at path "/var/mobile/Library/SafeHarbor/com.pocketgems.tappethotel/Container/Documents/ savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHis tory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGa meHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/sa vedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHisto ry/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGame History/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/save dGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory /savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHi story/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedG ameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/s avedGameHistory/savedGameHistory/savedGameHistory/savedGameHistory/savedGameHist ory/savedGameHistory/1313349538-pocket_gems_crash_report.txt" (MBErrorDomain/102)
    I manually snyc'ed that particular app and then re-ran the restore and am now the proud owner of a working iphone. Not sure it is the same problem or app but looking in the console was the key!

  • The printer m1214 mfp reboot by itself

    Product name: Hp LaserJet M1214nfh MFP
    O. S. : XP SP2
    Error message: Printing fax
    Changes: nothing
    Description of the problem: When the printer start up, the word " initializing ..." appear on the LCD
    after that the Ready screen appear for  10seconds after that " printing fax " appear for 3 seconds after that the printer reboot by itself and repeat the same things again and so on.
    i make update the firmware but the problem still exist.

    Hello,
    Thanks for the post.  With your M1214 behaving as such, I might recommend a product reset which should take it back to factory defaults.  I've included a link below that will assist with that process.  If that does not resolve the issue, we might look at getting the printer back to a ready status (if possible) and then running the FW update again.  Do not interrupt the FW update until complete.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01998773&tmp_task=useCategory&cc=us&dlc=en&lang...
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=40754...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Link v1.1.1 sync error: Failed to commit changes to the device

    Hi,
    I've been trying to sync my Q10 with Outlook for many times now without much success.
    PC OS: Windows 7 Enterprise 64bit
    Q10 OS: 10.1.0.2309
    Outlook 2010 32 bit
    BB Link: 1.1.1.26
    Steps:
    Q10 completely clear - no contacts, no calendar entries
    Start BB Link
    Connect Q10 via USB cable
    Click Q10 tab, Settings
    Synchronization - Contacts & Calendar - Configure
    Select Outlook account
    Click Sync Contact & Calendar
    (after couple of minutes) "Sync unsuccessful" is shown, click on it
    Error message reads "Failed to commit changes to the device"
    Click PC tab
    Click Create Log
    in SyncLog.html, the error message near the end of the file reads
    11:47:36.369  CBBTransBase::Close - Failed to commit changes to device record store
    11:47:36.369  Error Information: 18022 Failed to commit changes to device., File: .\BBTransBase.cpp, Line: 427
    Back on Q10, contacts are synced OK, but none of the entries appear in Calendar.
    Any help will be very appreciated. Thanks.
    Solved!
    Go to Solution.

    Hi MaKo7,
    Welcome to the BlackBerry Support Community.
    Sorry to hear about the issue you are having synchronizing. This KB article may provide more information. http://blackberry.com/btsc/KB34381
    Let me know if you have any other questions. Thanks.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help

    I have an Airport Extreme as my router and am using time capsule to extend the network in my new house. My ISP is only providing me 4-5 ip addresses and wants me to set up my router to issue out new ip addresses for all my devices.How do I fix this?Help.
    They said I need to change my settings to NAT settings. I haven't been able to figure out or find anything. I have also spoken to Apple Support on the phone for hours without being able to figure out how to do this ( i don't think he knew much either lol.) Please help me because I've got about 15-20 devices in my house that require to be connected to the internet and this is just making things ridiculously slow and painful for me.
    Thanks!

    It is on DHCP & NAT under router mode yet my isp is still the one issuing ip addresses to my devices instead of the router issuing them

  • During an update of the applications on the BlackBerry smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatis

    I have reset both my torch and playbook back to original only thing that I kept was my contact. And still problems I am a few min away from leave my loved blackberry and going android !! Or heaven help us Phone
    Issues 1) playbook wont connect to desktop manager anymore 
    2) Play book has 2 calendar icons with two different settings on them ??? I have one that is currently working with my yahoo email and calendar account. 
    3) my Phone when connected to desk top software shows the calendar as read only
    4) Unable to update my phone says During an update of the applications on the BlackBerry® smartphone an error message may be displayed "BlackBerry Desktop Software failed to validate your BlackBerry device update - Aborting install due to validation failure. Some packages contained unsatisfactory dependencies." 
    I just want my email and Calendars to work I am tried of spending nights trying to get these deices working !!! 
    someone please help me. !! 
    I know you are going to ask I have updated everything last time and it is all as update as it can get. 
    As for now as I wait I am going to wipe my phone again and just set everything up again !! If I have to even my contacts AHHHH Help I am starting to think crazy thoughts 

    Did you try to eboot the your PC or laptop where your device is connected ?
    I experienced this with my windows laptop, after a failed to do an update, I restart the laptop and my Torch, then retried, and it's worked

  • My ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    my ipad2 is unable to find wireless network(s). while at home I am able to connect my MacBook and iPhone to network but am unable to connect iPad. I have restarted the device multiple times and even reset the network and all settings but still no luck

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Blackberry Z10 sharing Media not recognising the devices

    Hi,
    Media sharing is not working in my BlackBerry Z10, Devices are visible in "Devices for sharing Media" and I have selected the desired devices however, in "select a device to play on" none of device is visible to select.
    I am trying to connect my Sony vaio PC which is DLNA certified.
    Do I need to make any changes in my blackberry device or laptop. Both devices are using same WIFI network.
    Thanks,
    UPEN

    upen_bb wrote:
    Hi,
    Media sharing is not working in my BlackBerry Z10, Devices are visible in "Devices for sharing Media" and I have selected the desired devices however, in "select a device to play on" none of device is visible to select.
    I am trying to connect my Sony vaio PC which is DLNA certified.
    Do I need to make any changes in my blackberry device or laptop. Both devices are using same WIFI network.
    Thanks,
    UPEN
    While playing Video, select More then Play On, you should see HDMI (Not connected) and compatible devices (mine Shows WDTVLIVE), select Media Sharing at the bottom and activate all media. Select Devices at the bottom and check if device is listed, it should be there with stacks of other unkown devices and IP addresses.

  • UNLOCKING THE BLACKBERRY DEVICE

    Dear Sirs,
    I travel a lot and like to take my blackberry 8900 curve with me and when abroad use a local sim to make calls etc., as it is significantly cheaper to do this. I have asked my service provider to do this but they have tried and failed in fact their attempt lead to my blackberry being blacklisted. This has now been lifted. I have received a new IMEI CODE from Vodaphone, with procedure instructions-
    1 turn off the radio on the handset. Failure to do this could result in the handset becoming unusable. I however do not know how to disconnect the radio, in fact do not think I have such a facility. Pls clarify.
    2 Go to advanced options-SIM CARD AND TYPE IN MEPD. I have tried that and nothing appears on the face of the phone. The sim card brings up Security disabled ID;-BLANK and on the next line a 20 digit number and two further lines, phone number blank and another line reading unknown number.
    3 Type? mep? press and hold the ALT KEY and press ?2?.
    4. you are now prompted to type in the unlock code.
    Since I cannot go, past item 2 above the whole exercise is futile and terribly frustrating.
    Pls help- the IMEI CODEon the phone.
    Could someone send me proper details to sort this. It would be a great help as I am very frustrated with Vodaphone.
    Many thanks
    Homi
    Edit: Personal information removed. At no time should you provide any personal information to any other community member. Check out the Terms & Conditions and User Guidelines for details.

    Hi there,
    In that situation I suggest you should Reload the device software , if your current issue is because of any software glitch then an OS reload will resolve such problem , before reload first do a backup of your device using desktop software , once you have your backup refer to this Knowledge Base :
    KB03621 : How to Reload BlackBerry Device Software and application using BlackBerry Desktop Software
    After reload if your current issue resolves then you can restore you data by following this KB article :
    KB10339 : How to use BlackBerry Desktop Software to restore data to a BlackBerry smartphone from a backup file.
    Try it and let us know.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Maybe you are looking for