BlackBerry keeps beeping all time - Only beeps when the connection with carrier is active.
Sirs,
I have a Curve 8900 with the 4.6.1.133 (platform 4.2.0.85).
This device keeps beeping every 10 seconds, I have tried remove the battery when the BB was on, waiting for 1 minute, put it again.
I have looked all configurations.
I don´t have any idea and want to throw it in the window.
Any ideas? Hints?
NEW INFORMATION. The device only keeps beeping if the wireless connection with the carrier is active. If it´s disabled the beeps stops. I´m using Claro in Brazil.
Camilo
Message Edited by camilotelles on 02-28-2009 08:14 AM
Message Edited by camilotelles on 02-28-2009 08:14 AM
Solved!
Go to Solution.
I have found the solution. This is a bug beetween a software in the SIM Card from the network operator and the BlackBerry device. It´s already solved. I had to follow some steps to enable and disable a specific feature of the network operator and wait for a dialog box to confirm my operation.
The beeps comes with the dialog box, but the dialog box only apears if you are in a specific screen of the blackberry. If you are in the home screen, it will not appear and you only hears the beep.
Camilo
Similar Messages
-
I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got. -
iphone 4s keeps beeping when plugged in i have blank screen but itunes recognizes it but cant allow access because of the blank screen
As your iPhone is getting connected to iTunes take a backup of your iPhone in iTunes : http://support.apple.com/kb/ht1766
And then Restore your iPhone to Factory settings and see if it works and if that doesn't fix the problem then there might be something wrong with the Hardware and you will have to take your iphone to Nearest Apple Genius Bar.
Restore iPhone : http://support.apple.com/kb/ht1414 -
Iphone 5 is beeping when I connect it for charging
iphone 5 is beeping when I connect it for charging. whats' up with that??
I use my 5S for my alarm each night only heard this for the first time a few days ago. took me about 10 minutes to find the beep as it was extremely quiet however discovered it was infact the phone. I flicked the mute button and I've never heard it since. It seems to only be audible when not on mute, given that its so quiet it probably does it 24/7 just had never noticed.
-
My 5s keeps setting my time to Chicago when it should be New York
My 5s keeps setting my time to Chicago when it should be New York, right now I've turned off automatic time setting, and did it manually. I've already restarted the phone. Any kind of solution to fix this problem would be appreciated, I've only had this phone a week or so just upgraded from a 4s and never experienced this problem before
Make sure Location Services are on for Time Zone:
Settings > Privacy > Location Services > System Services (at the bottom) > Setting Time Zone - On
If it is on, try turning it off , wait a second or two then turn back on -
I would like to format cells with time only. when I enter a time of day the current date is still in the cell which is not necessarily so. THere are no options for just date .
christine275 wrote:
... (this is a time worked by date and not always entered on the date worked)--
"Time" in Numbers is always "Time of Day", and is always part of a Date and Time value. "Amount of Time" is a Duration value, which may be displayed in a similar format to "Time of Day," but is a different type of value.
If you are entering the number of hours and minutes worked, format the column as Duration, set the units and the format in which you want to have the value appear.
The Date column will still contain a Date and Time value (Jan 1, 2011 00:00:00 in the cell shown in the example), but the "Time Worked" cells will contain only a Duration value.
Incidently, the Date in A2 was entered as "jan 1" (without the quotes). Numbers automatically adds the current year and the default time value, then displays the result in the closest format to what you've entered, or in the Date and Time format you have chosen.
The Duration value in B2 was entered as 3:15 (as displayed). Note that in the entry bar the duration is displayed as 3h 15m, probably to distinguish it from a similarly formatted (Date and) Time value.
Regards,
Barry -
New iPhone 5c keeps beeping and the screen just stays black.
new iPhone 5c keeps beeping and the screen just stays black?
Plug your device into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.
-
Why does Do Not Disturb only work when the iPhone is locked?
I've been wanting for awhile now a way to easily turn off all notification alerts and incoming calls while keeping cellular data and wi-fi on so I can use my phone in peace without gimping my wireless connections, and even though iOS 6 as a whole seems awesome to me, I'm disappointed Do Not Disturb only works when the iPhone is locked.
Was just wondering if other people felt the same way I do and start a discussion about it so maybe that with more people talking about it, Apple would pay attention to it more. People complaining about how calls and alerts were lighting up their screen at night seems to be some inspiration to why Apple added Do Not Disturb in the first place. Didn't know I was doing anything in violation of the Terms of Use so sorry about that.
-
PDF forms have problems displaying text and only appears when the field is selected
Hello,
I created some pdf forms to distribute to the company clients. But we are having some people complaining about the text visibility. When they have work in team, the pdf that they receive from a third person often appears unfill or without text, the text is only visible when the field is selected. I need to find a solution for this because our company products are base on this forms.
If there is any addition information that I should add to understand what is happening and how to fix it, I'll be happy to write it.
In the company, we all have mac and the forms where created innitially in Adobe acrobat 9 pro, but we have now Adobe acropabt XI pro.
The users have both Mac and Windows systems.
Thank you,This is usually caused by the form being filled-in and saved by a Mac user who is using the Preview application to view the PDF. More information is here: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html
It is a good idea to inform your users that Adobe Reader (or Acrobat) should be used to work with the forms. -
Is there any way to set a password so that txt messages only open when the password is entered
Is there any way to set a password so that txt messages only open when the password is entered?
Please help! Thanks for reading:)Hello Damien,
There is an option to set a passcode for the entire iPhone. You can use the following steps to set this up:
You can configure a passcode for your iPhone, iPad, or iPod touch using Settings > General > Passcode Lock.
Once enabled, you will be prompted for the passcode whenever you:
Turn on or restart the device
Wake the device
Unlock the screen
Note: You can specify the amount of time the screen must be locked before requiring a passcode.
You can find the full article here:
iOS: Understanding passcodes
http://support.apple.com/kb/ht4113
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Siri only works when "Raise to Speak" option is activated
Hello:
I have iOS 7 installed in my iPhone 5 and I have the following problem:
Siri only works when "Raise to Speak" option is activated. When I change this option and I try to talk with siri I do not receive any answer.
Please, could someone give me an idea to solve this problem!
All the best
jcI am having this same problem. The problem appears to be related to the microphone and must be a softwear issue. The microphone works with other apps, and works when making and receiving calls. It also works when I "raise to speak" to Siri, but it does not pick up any sound when I attempt to talk to Siri by holding the home button, or when pressing the microphone button on screen when in the Siri interface. Is it possible that holding the home button to talk to Siri is somehow not activating the microphone?
I should also note that I have tried turning the phone off and back on. I have tried the reset by holding the home button and the sleep/wake button, and I have even restored the phone in iTunes, although I did not set it up as a new iPhone, because I am not interested in losing app data, call history, messeges, etc. -
I downloaded several cds to my external hard drive in .mp3 format. Later, I copied them to iTunes. The songs only play when the external hard drive is plugged in. I tried to load the songs from iTunes to my iPhone and the songs don't play. I thought iTunes allowed me to transfer music to my iPhone and play it. What am I doing wrong?
Hi skoorb1,
When adding music to iTunes, you can set it to either make a local copy of the file, or simply point to the original location of the file (for example, on an external hard drive). If it is set to do the latter, it will not be able to play or transfer those files when the external hard drive is not plugged in. You may find the following article helpful:
iTunes: About the Add to Library, Import, and Convert functions
http://support.apple.com/kb/ht1347
Regards,
- Brenden -
My iPhone 5 is not showing up in iPhoto over WiFi.
Is this normal?
Or will it only show up when I connect with USB ?It will show up, when connected directly by USB as a camera.
-
I got the iPhone 5s this morning and I kept my number and as soon as it charged I got all my messages, but when I connected it to my iCloud and backed it up, when it was finished all the messages I received were gone. How do I get them back?
Hi sofia124,
Welcome to the Apple Support Communities!
It sounds like you may have either set the iPhone up as a new iPhone or restored from a backup that didn’t have your messages on it. If you do have either an iCloud or iTunes backup that you believe has your messages saved, you can restore from that backup to recover your information. Please use the attached article as a reference for restoring from a backup.
Back up and restore your iOS device with iCloud or iTunes
Have a great day,
Joe -
Im am using Windows 7 ,I log onto to itunes and connect my Iphone.When my iphone tries to sync it gives an error message "itunes has stopped working" - this only happens when i connect my iphone and it tries to sync - help please
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)
Maybe you are looking for
-
More BT speed rubbish... I think I am done this ti...
Here we are again, I have been having alot of dropouts or (router resets) for a while now and its always going off at the same times each day, I am on my 7th HH5 I have had 5 engineers out the last one actually fixed everything, my speed went back up
-
hi all i am doing in XI post-installtion, after setting prefix number step, i couldnot go to next step with socket error and also i could not access to http://server:50000/sld and exchangeProfile with 403 error "You are not authorized to view the req
-
Good evening everyone, I have a file of numbers to be printed via AirPrint, in print preview the contents of the paper takes up all the space on a page, but when I go to print, the content is always smaller leaving 2/3 cm unused ? advice?
-
Can't see iCloud window when starting numbers
My friend and I both have a MacBook and an iMac with Numbers installed on both. All machines are signed into iCloud, his into his account and mine into mine, with 'Data and Documents' ticked in the iCloud System Preferences screen. When I open Number
-
Reappearing mach_kernel in my HD folder.
I keep having an app labeled mach_kernel appearing in my HD folder. If I Trash it, I lose the possibility to launch into Safe Mode and have to reinstall to correct it. I do not know what it is or does or where it should be. Name: mach_kernel Kind: