Blackberry Office 365 email calender & contacts sync

Hey Guys
I'm looking to hook my Blackberry Bold up with Office 365.
From what I've learnt so far out of the box I can sync email using POP3 or IMAP4.
However, I would like to sync my calendar and contacts too. I understand I need BlackBerry® Enterprise Cloud Services to do this.
I can see that I can turn that service on in my Office 365 account.
However, do I need to purcahse BlackBerry® Enterprise Cloud Services from Blackberry as well?
What else will I need to get it going do you guys think?
Any help/advice would be greatly appreciated.
Kind Regards
Aaron

Hello montech;
Welcome to the forums and thank you for your question.
All necessary BlackBerry Business Cloud Service documentation can be located on the BlackBerry website. The following are links to that documentation.
BlackBerry Business Cloud Services Documentation
Business Cloud Services Information Portal
Business Cloud Services How To
Let us know if you have any further questions regarding this specific request.
BlackBerry Documents
BlackBerry Knowledgebase
MAD-VIKING

Similar Messages

Outlook 2013 with Office 365 and Google Apps Sync.

This is the scenario, hopefully somebody can give me some insight on how to resolve this.
Outlook 2013 with gapps. Both updated.
Outlook profile with an office 365 email account (which is as an exchange account) and google apps with our main account.
We installed an office 365 account since its the only way that several users can share and edit the same contacts on Outlook. They use almost all contact fields.
Gapps its the main email address and calendar. Shared calendars are deeply used too.
The problem is that when I edit a contact (the exchange account) I get an error -when- I edit the email field.
"The operation failed. The messaging interfaces returned an unknown error."
If I make a new Outlook profile with the exchange account and the gapps account via imap setup I get not errors BUT I loose calendars sync.
So I went back to the main profile and thought. <maybe both contacts engines are screwing Outlook.> So, since I don't care about gapps contacts anymore I disabled via:
Disable sync for individual products
https://support.google.com/a/answer/1041455?hl=en
And also disabled the dynamic Global Address (just in case).
But the same happens.
I tried with another box, with office 2010, updated it and made a new profile with the office 365 and gapps and the same history.
Finally I though about setting the office 365 account as imap but contacts are not downloaded.
So I'm between a rock and a hard place here.
I need to use office 365 account in the same profile as gapps account.

Hi,
What’s the file size of your Outlook data file? If your data file is over size, it may cause data file corruption.
Outlook data file corruption may cause this problem. Please try to run a repair of your Outlook data files to check the result:
http://support.microsoft.com/kb/272227/en-us
Note: You may need to run Scanpst.exe for several times until there is no error.
In addition, here is a thread discussed a similar issue, please take a look at it and check if it helps:
http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/office-2010-the-operation-failed-the-messaging/bdd2d604-e652-4fe5-96a3-038191f55d3c?page=1
Best Regards,
Steve Fan
TechNet Community Support

Office 365 Shared External Contacts - how do I delegate Edit and Update permissions to users

Hello
Office 365 Shared External Contacts - how do I delegate Create/Update/Delete/Edit permissions to users who are not Admins? These Contacts are in the Global Address List. Not Outlook personal Contacts. O365 Small Business Premium

Hi,
To grant users delegate permissions, open Outlook, go to FILE -> Info -> Account Settings -> Delegate Access -> Add -> Search and add the user, click OK -> Edit the permission of the user. We can set different permissions in the dropbox
of Contacts.
There are four permisssions for Contacts:
1. None
2. Reviewer (can read items)
3. Author (can read and create items)
4. Editor (can read, create, and modify items)
Select the permission that you want to grant the user.
We can also modify the permission later in this section.
I hope the information is helpful, if I misunderstood anything, feel free to correct me and provide more detailed description of the question.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How to configure a Office 365 email on SAP BI 4.1SP05 server to send scheduled reports by email ?

Hi All,
I am trying to figure out how to configure office 365 server on BI platform so that I can send scheduled reports by Email.
Below are the system details:
SAP BI 4.1 SP05
Microsoft Office 365 Email account
I referred to the SCN post for configuring gmail.
I could easily configure my gmail account.
I tried same logic with Office 365. Instead of using port 465 (for gmail) I used port 995 (for office 365).
That didnt work.
I also tried using port 587 for TLS authentication but that doesnt work either.
SMTP Link for office 365: smtp.office365.com
For simplicity purposes, I have opened all the ports on the firewall and server.
Please let me know if I have missed anything or if my whole approach is incorrect ?
I am open to suggestions and workarounds.
Thanks,
Prathmesh Pai

Hi there,
When the order is saved, the system will call the mail ID maintained in SU01 of the user.
It will then trigger the mail to the regular outlook mailbox.
Else in some cases a new Z table is defined to maintain the mail IDs. System will trigger the mail through outlook. It has that inbuilt capability.
Just ask your user to check his mail box to see if he has received the mail.
Regards,
Sivanand

Sync email calender contacts

My iPhone 3G is set up to sync with my microsoft Exchange 2003. It sync allright the calenders and contacts and email UNTILL i turn off the iPhone. When i turn it on again it will not sync the email but it syncs the calendres and contact - anyone know the solution to that ?

Hello montech;
Welcome to the forums and thank you for your question.
All necessary BlackBerry Business Cloud Service documentation can be located on the BlackBerry website. The following are links to that documentation.
BlackBerry Business Cloud Services Documentation
Business Cloud Services Information Portal
Business Cloud Services How To
Let us know if you have any further questions regarding this specific request.
BlackBerry Documents
BlackBerry Knowledgebase
MAD-VIKING

How to Keep my Email status as Unread in Outlook which i already Read in My BBQ10 with BIS Office 365 Email configuration

Dear Support
I replace my old blackberry with BB Q10 and using BIS configuration for Microsoft Exchange Online Offce 365 Email setup.
I use to check tocheck my email both on Microsoft Outlook as well as in my BB Q10.
My requirement to keep the email as Unread in my Oulook which i already read in my BB Q10. In my old blackberry i was able to achieve this by Turing OFF my WIRELESS RECONCILLATION option in Email option setup.
I need you help to achieve this setting in my new Q10 blackbrry for my business email accounts.
Rizwan Ashraf

The Q10 is not using BIS any longer, and if you read the message, the "read" state of the message will sync to your Outlook.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using Lync server 2010 with office 365 email in the cloud

We have a 5 year old install of Lync server 2010 in house that interacts with a local install of exchange 2008 via unified messenger. If down the road we want to try email in the cloud like office 365 can we still keep our local Lync server install? Thanks in advance.
This topic first appeared in the Spiceworks Community

I am reporting back with my solution. I can now confirm that one can have Lync servers on-premises with Exchange Online using Office 365 and the Lync Phone Edition devices will work. Contact search, calendar (although it only shows the day's
Lync meetings), and visual voice mail all work.
Summary of fix: AD FS certificates have to be issued by CAs that Lync Phone Edition trusts.
The problem was when the Lync Phone Edition came back and tried to log in through AD FS. Since we had single sign-on with Office 365 set up before we even ventured down the Lync path, the certificates for AD FS weren't issued by a CA that Lync Phone
Edition trusted. Getting new certificates solved the issue. (They were issued by the same CA that did the "external web" certificate on the Lync Front End in case that matters.)
I tried hard to get the phones to trust the original certificate first, putting it in Active Directory using the
certutil -dsPublish method, putting the original CA on the Lync Web Services trusted list using
Set-CsWebServiceConfiguration. But nothing seemed to work until I finally just gave up and got a new certificate issued. I am now running without any certificates listed in Active Directory nor any explicitly listed in Lync's Get-CsWebServiceConfiguration
and it works great.
The Technet articles are woefully out of date when it comes to the trusted CA list, but here's a link to the list of trusted CAs (with the updated firmware): http://blog.schertz.name/2014/10/lync-phone-edition-and-public-certificates/

IPhone mail app is not pushing Office 365 emails to show in my lock screen

Hello,
I transferred from one college to another last semester and set up my iPhone to receive school emails as I had at my previous school. Both colleges use the same email system, Microsoft Office 365. At my first college, my email functions worked perfectly fine, and everything showed up in my lock screen as I had set it to do. But upon transferring, only my personal emails would push to the lock screen. That semester, this issue caused me a good amount of trouble. Professors would email me asking if I could stop by their office between certain hours during the day, but only much later would I receive the email, and their office hours were long over. I am the type who checks her lock screen for notifications during the day, and only when I'm bored or have a certain purpose in mind do I unlock it, so I -desperately- need a way to resolve this issue. Does anyone have any tips or suggestions?

Mail has to be running in order for you to be notified of new mail. It doesn't need to have any windows open. If you're sure that it is running in the background, open the Notifications preference pane and check the settings for Mail.

Delegated Access will not remove - Office 365 email

Hi Guys,
We run our email purely on Office 365 and attach it to Outlook 2010 for our users. I have had no problems in the past delegating full access and then removing it. However I have a single user that when I remove their access, it seems to take (no error messages)
but then when I go back into the mailbox they still have full access.
I have checked the users Outlook's and they have not delegated access between them from there, tried it both with and without caching and neither user is on any sort of litigation hold (the few things I have seen asked to try on forums).
This user will not remove from any mailboxes they have access to.
Similar to the problem described here: http://community.office365.com/en-us/f/148/t/175474.aspx
Any help would be much appreciated.
Thanks
Gav

Hi,
The issue may occur when the delegate cache gets corrupted. Please try the steps below to check the result:
Go to File -> Account Settings -> Account Settings -> Double click on the account name -> Uncheck "Use Cached Exchange Mode" -> Next -> Finish -> Exit Outlook.
Then please start Outlook in Safe Mode:
Press Win + R, type "outlook.exe /safe" in the blank box, press Enter.
Go to File -> Account Settings -> Delegate Access -> Add anyone as delegate -> Close Outlook.
Then re-open Outlook in Safe Mode again, go to Delegate Access to remove all the delegates.
If the steps above doesn't help, we may need to remove the permission at the mailbox level. Since you are using Office 365, I suggest you post the question in Office 365 Community:
http://community.office365.com/en-us/f/default.aspx
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Office 365 email deployment using Outlook 2010 and PRF files

Hi,
I've been struggling to get Outlook 2010 setup with a new Office 365 deployment. I would like to use custom PRF files to get the new Outlook profiles configured. I have more than 100 users.
One of PRF files I'm using is shown at the end of this message. Each user will get a custom PRF file with his/her information already configured (mailbox, server name, etc...). I've obtained the corresponding Exchange server using:
Get-Mailbox <email> | select ExchangeGUID
I've attached the domain at the end of the GUID and then that's the Exchange server. It matches what you get with Outlook using Autodiscover.
Using these PRF fies I'm able to create a new default profile and set all the parameters as if I had create the profile manually. Two problems here though:
1) I don't know what to change in the PRF file to set the Logon Network Security to Anonymous Authentication under the Security tab (Exchange account properties)
2) When Outlook asks me for the username and password, it won't take it, and I know I'm using the right credentials. If I create the profile manually (not using Autodiscover) and I use the same configuration parameters in the PRF file, everything is ok. I have
already run all the updates and tools that come as part of Setup Desktop in Office 365. Actually I get the same results with Outlook 2013.
I'm looking for some help here or ideas how to roll Office 365 without having to go user by user and creating a new profile and waiting for Autodiscover to finish :)
PRF FILE for one of the users (i'm using [email protected] to avoid putting here the actual client's address):
;Automatically generated PRF file from the Microsoft Office Customization and Installation Wizard
; Section 1 - Profile Defaults
[General]
Custom=1
ProfileName=Office365
DefaultProfile=Yes
OverwriteProfile=Yes
ModifyDefaultProfileIfPresent=false
; Section 2 - Services in Profile
[Service List]
;ServiceX=Microsoft Outlook Client
ServiceEGS1=Exchange Global Section
Service1=Microsoft Exchange Server
; Section 3 - List of internet accounts
[Internet Account List]
; Section 4 - Default values for each service.
;[ServiceX]
;FormDirectoryPage=
;-- The URL of Exchange Web Services Form Directory page used to create Web forms.
;WebServicesLocation=
;-- The URL of Exchange Web Services page used to display unknown forms.
;ComposeWithWebServices=
;-- Set to true to use Exchange Web Services to compose forms.
;PromptWhenUsingWebServices=
;-- Set to true to use Exchange Web Services to display unknown forms.
;OpenWithWebServices=
;-- Set to true to prompt user before opening unknown forms when using Exchange Web Services.
[ServiceEGS1]
[email protected]
[email protected]
[email protected]
ConfigFlags=0x00000100
RPCoverHTTPflags=0x002f
RPCProxyServer=outlook.office365.com
RPCProxyPrincipalName=msstd:outlook.com
RPCProxyAuthScheme=0x0001
[Service1]
OverwriteExistingService=Yes
UniqueService=No
[email protected]
[email protected]
OfflineAddressBookPath=
OfflineFolderPathAndFilename=
; Section 5 - Values for each internet account.
; Section 6 - Mapping for profile properties
[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
OfflineAddressBookPath=PT_STRING8,0x660E
OfflineFolderPathAndFilename=PT_STRING8,0x6610
[Exchange Global Section]
SectionGUID=13dbb0c8aa05101a9bb000aa002fc45a
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
ConfigFlags=PT_LONG,0x6601
RPCoverHTTPflags=PT_LONG,0x6623
RPCProxyServer=PT_UNICODE,0x6622
RPCProxyPrincipalName=PT_UNICODE,0x6625
RPCProxyAuthScheme=PT_LONG,0x6627
AccountName=PT_UNICODE,0x6620
[Microsoft Mail]
ServiceName=MSFS
ServerPath=PT_STRING8,0x6600
Mailbox=PT_STRING8,0x6601
Password=PT_STRING8,0x67f0
RememberPassword=PT_BOOLEAN,0x6606
ConnectionType=PT_LONG,0x6603
UseSessionLog=PT_BOOLEAN,0x6604
SessionLogPath=PT_STRING8,0x6605
EnableUpload=PT_BOOLEAN,0x6620
EnableDownload=PT_BOOLEAN,0x6621
UploadMask=PT_LONG,0x6622
NetBiosNotification=PT_BOOLEAN,0x6623
NewMailPollInterval=PT_STRING8,0x6624
DisplayGalOnly=PT_BOOLEAN,0x6625
UseHeadersOnLAN=PT_BOOLEAN,0x6630
UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
UseHeadersOnRAS=PT_BOOLEAN,0x6640
UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
ConnectOnStartup=PT_BOOLEAN,0x6642
DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
DisconnectOnExit=PT_BOOLEAN,0x6645
DefaultDialupConnectionName=PT_STRING8,0x6646
DialupRetryCount=PT_STRING8,0x6648
DialupRetryDelay=PT_STRING8,0x6649
[Personal Folders]
ServiceName=MSPST MS
Name=PT_STRING8,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Unicode Personal Folders]
ServiceName=MSUPST MS
Name=PT_UNICODE,0x3001
PathAndFilenameToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703
[Outlook Address Book]
ServiceName=CONTAB
[LDAP Directory]
ServiceName=EMABLT
ServerName=PT_STRING8,0x6600
UserName=PT_STRING8,0x6602
UseSSL=PT_BOOLEAN,0x6613
UseSPA=PT_BOOLEAN,0x6615
EnableBrowsing=PT_BOOLEAN,0x6622
DisplayName=PT_STRING8,0x3001
ConnectionPort=PT_STRING8,0x6601
SearchTimeout=PT_STRING8,0x6607
MaxEntriesReturned=PT_STRING8,0x6608
SearchBase=PT_STRING8,0x6603
CheckNames=PT_STRING8,0x6624
DefaultSearch=PT_LONG,0x6623
[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046
FormDirectoryPage=PT_STRING8,0x0270
WebServicesLocation=PT_STRING8,0x0271
ComposeWithWebServices=PT_BOOLEAN,0x0272
PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
OpenWithWebServices=PT_BOOLEAN,0x0274
CachedExchangeMode=PT_LONG,0x041f
CachedExchangeSlowDetect=PT_BOOLEAN,0x0420
[Personal Address Book]
ServiceName=MSPST AB
NameOfPAB=PT_STRING8,0x001e3001
PathAndFilename=PT_STRING8,0x001e6600
ShowNamesBy=PT_LONG,0x00036601
; Section 7 - Mapping for internet account properties. DO NOT MODIFY.
[I_Mail]
AccountType=POP3
;--- POP3 Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- POP3 Account Settings ---
POP3Server=PT_UNICODE,0x0100
POP3UserName=PT_UNICODE,0x0101
POP3UseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
POP3Port=PT_LONG,0x0104
POP3UseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
LeaveOnServer=PT_LONG,0x1000
[IMAP_I_Mail]
AccountType=IMAP
;--- IMAP Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- IMAP Account Settings ---
IMAPServer=PT_UNICODE,0x0100
IMAPUserName=PT_UNICODE,0x0101
IMAPUseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
IMAPPort=PT_LONG,0x0104
IMAPUseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPSecureConnection=PT_LONG,0x020A
ServerTimeOut=PT_LONG,0x0209
CheckNewImap=PT_LONG,0x1100
RootFolder=PT_UNICODE,0x1101
Account=PT_UNICODE,0x0002
HttpServer=PT_UNICODE,0x0100
UserName=PT_UNICODE,0x0101
Organization=PT_UNICODE,0x0107
UseSPA=PT_LONG,0x0108
TimeOut=PT_LONG,0x0209
Reply=PT_UNICODE,0x0103
EmailAddress=PT_UNICODE,0x000C
FullName=PT_UNICODE,0x000B
Connection Type=PT_LONG,0x000F
ConnectOID=PT_UNICODE,0x0010

Wow, even if we were to find out what to add to the PRF, it turns out each user mailbox has it's own unique server name (aka Virtual Connection Point). I cannot believe two departments of Microsoft aren't talking to each other!!!! ..... wait, that always
happens. 1 week later and probably 100 hours later I am just going to create a simple how-to for each user.
Here is the link I just found explaining the "virtual connection points". http://www.blackmanticore.com/2c209fbaa93ae6cf8f8dac5b50281f2e
I'm sure NEXT YEAR Microsoft will catch up with itself and add this option/feature in the Office Customization Tool to create PRF files that will actually work with their services.

Calendar Sync not working - email and contact sync working

Hi,
my company's exchange activesync is working for email and contact but not for calendar. there is no single meeting in my iphone calendar. when invitation arrives, I get alarm and I can even see invitation on phone and can accept it. it then goes into calendar but gets removed soon after (after it gets sync with exchange I guess).
I know that multiple issues like this have been discussed in this forum but could not find similar. My IT guy telling me that it is iPhone issue as it is only one global object and my email and contacts are working.
BTW, other iphone users have same issues.
Any comments? is this because of 2.2.1?
thanks,
Sam

were you able to solve this? i too can sync mail and contacts but not calendar...
so far i have recreated my SSL
rerun the internet connection wizard
tried it from my ipod touch running 2.2.1
tried it from my dev iphone 3g running 3.0b5
tested and CAN access everything via outlook and OMA
can add an appointment via iphone, it appears in Outlook, but cannot add from outlook and sync
have deleted every single appointment/event/anniversary then added one to check for corrupt.
everything worked fine until a few days ago when the dev iphone had 3.0 installed on it... at first, the calendar was all i could get to sync, we had some interesting firewall setup that was causing confusion for a few things, in an effort to make life easier on the dev phone, the firewall was simplified (removed double NAT). but, in the process of removing and adding and removing and adding my Exchange info, i gained the ability to sync my contacts and mail, but lost my calendar.
i do not think 3.0 is the exact issue, but i do think it may have caused some kind of problem with exchange or activesync which others have apparently been able to cause with 2.2.1.
any verbose suggestions are appreciated... i've spent the last two days pulling out whats left of my hair and trying to find someone with a Windows Mobile or other Activesync device that's not iPhone/iPod to test looking for clues. thanks.

Office 365 : Email distribution group

Hi,
We have a scenario where user will create a list item in Office 365 SharePoint 2013 and when the list item is created, an email will be sent through a designer workflow.
The list item will have a column (people and group column ? ) where the user will add the distribution group to which the email should be sent. Can we create the distribution groups in exchange online containing external users (users not from domain..they
can be gmail, yahoo etc) and use them in people and group column in sharepoint.
If not, how can this be achieved ?

Hi,
According to your post, my understanding is that you wanted to use external user in people and group column in SharePoint Online.
First, we need to add external user to the site. Please refer to:
Office 365 & SharePoint 2013 Online: Managing external users
Then we can create a list and add People/Group column.
Finnaly, we can select the external user in the column:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Labview VI configuration to send to Office 365 email server

We are using Labview 8.5 and had a VI configured with the IP address of the email server we had here in order to receive status alerts. We have moved to Microsoft's hosted Office 365 solution. Does anyone know what I would use for the email server in this case?

There should be a host name for the server. You should be able to use that.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

CF10 office 365 email settings result in undelivered mail

Hello, can someone help me with the Cold Fusion admin settings to allow mail to be sent using Office 365?
Thanks,
Renee

Hello,
Yes, there are entries in the log file. I sent them to you. Do you need the mail file again?
This is the error:
"Error","scheduler-4","10/08/14","11:00:33",,"javax.mail.MessagingException: Could not connect to SMTP host: smtp.office365.com, port: 587; nested exception is: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?"
Thanks,
Renee

Office 365 Exchange Online not syncing on 4G

I have been using Office 365 for over a year now and have not had problems like today. None of my devices will connect to the Exchange Online server via the Verizon Mobile Data connection. It works fine on Wifi, but not 4G LTE. I spent and hour and half on chat with Verizon and they tried to reset some things with no success. I have submitted a ticket with Microsoft, but I was busy with something else when they called. I am now waiting for a call back. Anyone else have this issue? I only have Verizon devices, anyone with another carrier experience this? Unfortunately I only have Samsung devices as well.

Forgot to mention, the PSEXEC command needs to be run as an Administrator
Run PSEXEC -i -s C"\Program Files (x86)\Internet Explorer\iexplore.exe" (This opens Internet Explorer as the SYSTEM account)
Goto Internet Options > Connections > LAN Settings and untick the "Automatically Detect Settings"

Blackberry Office 365 email calender & contacts sync

Similar Messages

Maybe you are looking for