BlackBerry Passport won't get past 100%

Hello,
Yesterday I tried opening an e-mail on my BlackBerry Passport - the screen faded to a darker colour (as if it was going to open it), then returned to the hub. I tried to open it again and the same thing happened.
I refreshed the hub by swiping 5 times from the top right to the centre of the phone - I was still unable to open the e-mail, or any other e-mails I had read in the past.
I then restarted my phone, however when it was rebooting, here's what happens:
It displays the BlackBerry logo
It shows the 'loading' screen (BB logo and the square loading bar around the logo)
It gets to 100%, and that's it... nothing further happens
Occasionally, it automatically restarts the cycle, displays the logo and then begins loading to 100% again. It stays on 100% for hours, the phone gets extremely hot then this morning the battery had died on it.
I plugged in the charger, then minutes later the cycle started again.
I have tried powering off & on, holding both of the volume buttons and loads of other combinations, but the same issue persists. Interestingly, the phone doesn't seem able to actually fully power off. If I hold the power button down for 10 seconds, the screen goes black, a red light shows for around 2-3 seconds, and the restart process begins again. This happens regardless of how I shut the device down.
Ordinarilly I'd take the battery out of my Q10 if something like this happened and put it back in - obviously this isn't an option with the Passport.
Is there anything I can do? I tried to wipe it from Link, but it doesn't recognize the device is plugged in via USB.
This is literally 2 weeks old and I'm extremely frustrated that this is happening to such a new and 'necessary' device.
Thanks,
Nathan

Yea, I would be frustrated also.
1. You can return the device for a warranty replacement.
2. Try connecting to Link via a different USB port on your PC, or use a different PC with Link installed.
You might try also making the connection to Link while the device is rebooting.
I agree, a new device shouldn't have these issues.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

My husband(less technologically inclined than I am), decided to delete programs from our iMac, now it has a grey screen and won't get past it. If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

My husband(less technologically inclined than I am), decided to delete programs from our iMac, he turned it off and now it has a grey screen and won't get past it. It won't start in safe mode and when I If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

With a corrupt disk, the install procedure is most likely going to fail.
How old it the disk?
You might be able to reformat it to fix the problem. Of course that means you lose all of your data.
The other alternative is to get a new disk drive and put that in your Mac and install OS X
Then put the old disk drive in an enclosure and see what can be recovered from it.
Allan

MacBook 2010 won't get past loading screen

Hi everyone. I don't live anywhere near an apple store so am hoping I can get some help here. My MacBook won't get past the initial White loading screen with the grey apple logo. A loading bar (which I've never seen before) comes up, loads about 1/5 of the way, disappears, comes back empty, does the same thing then my laptop turns off. About two weeks ago the battery stopped working without being plugged in and each time I turned it on it had reset the date to 01/01/2001. Any advice would be greatly appreciated. Thank you.

Welcome to the Apple Support Communities
The hard drive is damaged. Insert the Mac OS X DVD, press C key when your Mac starts, go to Utilities > Disk Utility and repair the drive. If it doesn't work, take the Mac to an Apple Store.
If you haven't made a backup, download DiskWarrior

My eyeTV Hybrid won't get past the 'connect to your mac' stage. anyone know whats wrong?

My eyeTV Hybrid won't get past the 'connect to your mac' stage. anyone know whats wrong?

Forgot to put its not recognising the fact thats its plugged in during set-up. But if put it in before i've even started set-up it starts on its own. so my mac know's its there. so confused

My emac won't get past the grey screen with spinning indicator

before i went to bed last nite it was fine. when i woke up i click on the screen and got the little rainbow ball. that lasted for about 5-10 minutes so i had to push the button. when i try to turn it on now it gets to the grey screen with the spinning indicator but won't get past that. any help would be appreciated

An Archive and Install will preserve you user settings and data. You will need a minimum of 5 GB free on the hard drive to perform an A&I; you can reduce the space required by about 1 GB by selecting the option to install language support only for the language you use (assuming you don't need multiple languages).
However, after seeing your other post (BTW, it'll be easier to keep track if relted issues are in the same thread), you do not want to try an A&I if Disk Utility is reporting anything about 'could not be repaired'. Doing so will would ensure problems down the road, if it worked at all. It's possible for one disk problem to mask another. Whenever Disk Utility (or any other repair utility) reports making repairs, it's good practice to repeat the repair until it reports no problems found or it becomes clear it cannot repair the disk.
DiskWarrior has an excellent track record at repairing problems that Disk Utility cannot (especially Disk Utility versions prior to OS X 10.4.2).
If the drive cannot be repaired, you may be able to keep it by doing an erase install with the write zeros (one pass) option. That will update the hard drive firmware record of bad disk sectors to avoid using. If there are only a few bad sectors, that may let you keep using the hard drive for several more years. An erase install will do just that to your data, through. If you have access to another Mac with either a large amount of free disk space of a DVD burner, you can try using the other Mac as host and the eMac as target in FireWire target disk mode. You can run the host's copy of Disk Utility on the eMac hard drive, and hopefully be able to mount the emac HD so that you can back up the data in your Home directory.

Computer won't get past the blue screen...

During class today I decide to install new updates to my computer, but class ended before everything had downloaded so I just closed the screen thinking nothing of it. Now my computer won't get past the blue screen and it just keeps reloading and reloading. Help?

You must have damaged your OS installation by putting the machine to sleep at the wrong moment. To fix that, you need to reinstall, but first you need to back up your data, if you haven't already done so. Have you?

Computer won't get past grey start up screen after install

Okay - I made a stupid mistake. I started the installation process - it was taking a very long time so I decided to quit and free up some more space before trying again. When I quit it wouldn't let me go back to my old version - I think I was on 10.3.9. So I installed 10.5 - and it said it installed successfully. I restarted and the computer won't get past the gray screen. I let it go for 30 minute the first time, 15 the second time, and about an hour the third time. Won't go any futher. Any ideas?
Thanks,
-Brad

same thing happened to me (you need to read all the posts as someone will have had the exact problem as you).
any way,
1. re-installl 10.5 from your leopard disk. (put disk in restart holding c key down etc). do not install OS just yet.
2. run disk utility (it does not hurt-click on options button)- repair both disk and permissions
3. run 10.5 installer (archive)
4. download 10.5.2 combo from apple (that is if you can easily find it!)
5. run that install
6 it will restart two or so times
7. total time is 20 mins or so. most of that is in repairs form #2.

Pavilion p6-2117 won't get past the splash screen with a parallel card installed.

Pavilion p6-2117c won't get past the splash screen with a pci express parallel card installed. I take the card out and the machine works just fine. The screen says press "esc" for startup menu but nothing happens.
This question was solved.
View Solution.

Take a careful look at the slot and see if any of the pins are broken or smashed to the bottom of the slot. Do you have another pci slot to try or just the one?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Computer won't get past OS screen after unlock, even if I am still using 2 cores

>Phenom II x2 555 BE
>MSI 870a-g54
So I decided to unlock my CPU and have been experiencing a problem. I recently found out that if I even have "unlock core" function enabled in BIOS, even while running it with two cores, the computer won't get past the windows screen. With four cores enabled it obviously does the same. No matter what I try I cannot get past the Windows screen while having the unlock core function enabled.
My BIOS isn't on the latest version. I tried flashing it but I couldn't start it up even after flashed, it gave me the same problem described above. I reflashed it to the version I'm on now and it works, but I still can't unlock. What gives?
Any help would be appreciated.
TL;DR: PC will run as Phenom ii X2 555, but not as Phenom ii x4 B55. Can't get past windows screen.

you need to provide more vcore to the cpu
first try to enable 1 core (core number 3) (disable core number 2 and 4) and increase some vcore. If booted then you have a good core.
Then try this with other core (core number 4) (disable core number 2 and 3), if booted then your both cores are unlockable and are good core (i.e, not defective)
then you can try all cores at same time with some voltage increase (vcore)

IPhone won't get past lock screen. Restart won't work.

My phone was charging and I took it off the charger, my friend played around and did the color invert thing (where you press the home button 3 times). Now it won't get past the lock screen. When I try to put in my pass code it just puts boxes around the numbers but won't actually press it. I tried restarting it, it's currently plugged into my computer and nothing. It was really warm when I first noticed this. Help!

It sounds like your friend also turned on VoiceOver, which speaks items on the screen as you touch them (and sounds like the Siri voice). You will need to go to Settings>General>Accessibility>VoiceOver and turn it off. However, with VoiceOver on the way you use the iPhone screen changes. First, to scroll you will need to flick the screen with three fingers. Next, to activate something on the screen you will need to first tap it once to select it, then double-tap it to activate it. Example: to open Settings, tap Settings once (the voice will say "settings"), then double-tap it again and it will open. The specific steps are:
Enter you lock code by tapping the first number once to select it, then double-tap it to enter it. Repeat for the other numbers.
Press Home.
Tap Settings. Then double-tap Settings.
Tap General. Then double-tap General.
Use three fingers on the screen to scroll to Accessibility.
Tap Accessibility. Then double-tap Accessibility.
Tap VoiceOver. Then double-tap VoiceOver.
Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.
To fix the inverted colors, go to Settings>General>Accessibility and turn White on Black to Off.

IMac won't get past startup screen, no matter what. Pls help?

I just inherited a mid-2010 iMac from a friend. It hadn't been used for months, and now when it is started up, it won't get past startup screen. It shows the 'slot' looking image on the bottom of the white loadup screen, then it's just the apple symbol and the whirly thing going around forever. I've had it going for over half an hour at one point, and nothing changes. I have tried all the different reboot key combos, such as C with a startup disk in it, D for hardware test, command S for safe mode, etc. The only thing which makes any difference at all is using the T key at startup, when I do get the three-pronged white symbol floating around screen.
It is a 21 inch with 500gig, and I believe it's running Snow Leopard. They never had a problem with it before, but now after the months of disuse, it is doing this. Please, can anyone help? Thanks!

I'm not sure if a dead PRAM battery would give you these symptoms, but one possibility is that if the computer was off wall power for months, the PRAM battery, a small coin cell battery that controls certain functions, may be drained and dead.
But, in any case, try an SMC Reset. You must follow the timing for this exactly.
http://support.apple.com/kb/ht3964
And then a PRAM Reset.
Hold down Option-Cmd-P-R together at the startup chime, listen for two more chimes, total three, then release all the keys to finish booting.
You might also try a Safe Boot by holding down Shift at the startup chime. (Cmd-S isn't for Safe Boot, it's single user mode.) Give it much longer to boot than usual, but if it doesn't finish in perhaps 5 or 10 minutes, then you'll have to give up on that.

Won't get past "Platinum screen", keyboard not recognized

Hi all,
I just built a system, haven't even loaded up the OS yet. On the first boot, the computer won't get past the screen which says "Platinum" and says "tab to switch to post" or "del to run BIOS setup." The lights don't flash on the PS/2 keyboard i hooked up (a 6 year old Compaq one). I then tried a 2-year old Dell PS/2 keyboard with the same result. Is this problem fixable? I bought this off of Newegg and there is still time to return it, if I need to. Thanks for your help in advance. Also, if this topic has been beaten to death, I'm sorry. I'm in a state of panic right now since this computer isn't even for me.

I had the same symptoms first time I tried to boot my then-new K8N Neo2 Plat. I had the advantage of having the D-bracket, which was telling me it was hanging in the memory test. I had stuck in some cheapo memory to set up the board, waiting for my good stuff to show up. Turns out the memory was not up to the task. When I stuck in the good stuff, she fired right up. What memory are you using? Are you sure you don't have the D-bracket? it looks like a PCI back-plane USB bracket, except it has 4 LEDs on it (in addition to 2 USB ports and a 1394 port).

Macbook froze, now it won't get past the boot logo!

I was using my macbook tonight... using a bunch of programs, then all of a sudden everything just froze. I turned it off by holding the power button, then booted it back up... but it won't get past the apple logo and the circle just keeps moving round and round. I've never had any issues with it until today so I'm kind of surprised. Any ideas how to fix this?
I do have generic 3GB ram but it has never given me issues for the past 2 years. I also installed a WD blue scorpio 500GB hd a few months ago and I haven't had issues with that either.
PLEASE HELP!!

tibookg4 wrote:
I was using my macbook tonight... using a bunch of programs, then all of a sudden everything just froze. I turned it off by holding the power button, then booted it back up... but it won't get past the apple logo and the circle just keeps moving round and round. I've never had any issues with it until today so I'm kind of surprised. Any ideas how to fix this?
I do have generic 3GB ram but it has never given me issues for the past 2 years. I also installed a WD blue scorpio 500GB hd a few months ago and I haven't had issues with that either.
PLEASE HELP!!
Hi I have been looking at this drive for myself and heard that some people are having issues.
I would suggest you try to boot again holding down the OPTION key this will show you all the drives connected and determine if you can see you WD. If so click and see. If not I suggest you put your OS X Install DVD in.
DO NOT INSTALL
Goto utilities and Disk Utility.
Can is see the drive there?
If so select the drive and then goto REPAIR DISK can also repair permission but this sounds like something else.
Resetting the PRAM may help, but I do not suspect this is part of that problem.
Good Luck!
-h

My Macbook won't get past the start up screen

Hey everyone
I have a Macbook that's about 3 years old. I did an software update yesterday and since doing it the computer won't get past the start up screen. There's just the Apple logo and the rolling ball thing. It's been stuck there for around 30mins and nothing changes. I'm not really sure what has happened but I was wondering if there is any way I can fix it.
Thanks for your time.
Bevan

Hey Lyssa
I don't have a back up but I'm not to worried about that as it's my traveling computer and I only use it for the web and some word processing.
I don't have the disks with me right now as I'm away from home. I'm not sure what I had updated, I think there was a lot because I hadn't don't it in a long time.
If I can start it in safe mode what should I do?
Thanks.
Bevan

L305d-s5934 Won't get past "please wait screen"

My l305d-s5934 started ranodmly shutting off recently. It is only a year and a half old so I figured it was getting too hot. About a week and a half ago it started getting stuck at the Windows "please wait" screen. I have been forced to power off with the power button. I tried startup repair and system restore. Now the only way I can boot completely is in safe mode. It won't get past that screen. When I try to restore now, it shuts off halfway through. Is this just the lifespan of this particular machine, or is there something I can do? Thanks for any help.

sounds like an OS issue to me..but have youu tried disabling all startup items, disconnect all usb devices and check it again. If there will be no changes then consider running an OS reinstall.
=========================================================
the only easy day was yesterday.....
=========================================================

BlackBerry Passport won't get past 100%

Similar Messages

Maybe you are looking for