Blackberry Playbook Overheated but works fine, screen is dark from edges about 1 inch and the rest is a light color

Hi,
I woke up this morning and tried picking up my playbook but it was very hot and also still charging, then I took it off of charge and I let it cool down. The playbook turns on and functions fine, but the screen is dark from around the edges (about 1 inch) and then light from the inner side. Also I never took my playbook into the sun or any other hot place and I think my factory blackberry playbook charger might be at fault. I didn't get any notification or any other type of hint from my playbook that it was hot or overheated. My playbook was turned off when it was charging and my bedroom was cool because of my A/C and ceiling fan. I don't understand how this happened and how can I make the screen go back to normal, It has been about 1 hour now and nothing has changed about the screen.
Solved!
Go to Solution.

My Playbook is fine now, the screen is normal again and the charger was at fault, but charge your BB playbook when itis turned on because my playbook was off and overheated and this was overnight. Also I resolved the screen problem by leaving it in a cool room in my home, and the LCD (Liquid Crystal Display) crystals were probably just very hot and they had to cool down also the battery life is still the same . But the BB playbook is fine and works fast, also I still have all my files and every function work perfectly. I wrote this from the BB playbook.

Similar Messages

The spry pop-up menu I built in Adobe Dreamweaver worked fine in my old Firefox, I updated Firefox today and the menu no longer works--despite disabling the pop-up blocker in Firefox preferences...what's the problem??? I need the menu to work!!!

I built a new pop-up menu for my website using Spry in Adobe Dreamweaver. Because of some differences in .HTML and .XHTML
it took me days to get it right. I tested every variation in Firefox until it worked perfectly. Today, I installed the newest version of Firefox and now the pop-up no longer works. I changed the preferences in Firefox to disable to pop-up blocker and it STILL DOESN'T WORK...although an older style of pop-up menu (menu machine) which is no longer supported by Adobe, DOES WORK.
HELP!!! THIS IS IMPORTANT.

pixlor:
OP is using CS3 and the menu blog is talking about the menus
in earlier
versions of FW, so *most* of the points made in the blog
don't apply.
That's not to say that using CS3 pop-up menus is a *good*
thing....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixlor" <[email protected]> wrote in
message
news:gbce7b$a50$[email protected]..
>
quote:
Originally posted by:
captainbianco
> I agree completely and totally, and I will haha but I'd
like to get this
> one
> fixed if I can. You can view the page here
>
http://www.flooringanswers.com/nysurfaces/index2.htm
> Hover over the letters to see the pop-up menu's. The one
over "t" is the
> problem.
> Under Flooring, for example, you have a div with id of
> MMMenu0910163730_1_1
> (ugh). Under that are four items and they have their own
IDs:
> MMMenu0910163730_1_1_Item_0
> MMMenu0910163730_1_1_Item_1
> MMMenu0910163730_1_1_Item_2
> MMMenu0910163730_1_1_Item_3
> MMMenu0910163730_1_1_Item_4
>
> Your CSS file, however, doesn't have location
information for the ..Item_4
> object.
>
> That's just from a quick, cursory look. In order to fix
this, you're going
> to
> have to go through it line by line and debug it. By the
time you do this,
> you
> might be better off getting something else and starting
from scratch.
>
> Read this:
>
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
>

I'm trying to get rid of logmein. I threw away the entire application but I can't remove it form my overhead menu bar and the activity monitor tells me it's still running.

I'm trying to get rid of logmein. I threw away the entire application but I can't remove it from my overhead menu bar and the activity monitor tells me it's still running. How do I get rid of it completely?

Install it again and use the developers uninstall instructions
How to uninstall/install software on your Mac

HT1414 touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod

touch screen does not work on my ipod when playing music on itunes, but works fine on every other thing on ipod, can anyone help or what is the cause

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock

HT1444 Screen is blank on startup but works fine when doing a safe boot. What could be wrong?

I have a Mac book pro 15 inch and the screen goes blank on startup. Screen comes up on safe boot. Also updated OS on line and do not have a backup disk to repair from. What should I do?

got system to boot up in safe mode and went into disk utility and did a repair on disk permissions and restarted, now everything seems to be working as it should. Now i don't have to go out and buy a new Mac but than again maybe I should.

My imac feels really hot, but works fine. Should I be worried?

My imac feels really hot, but works fine. Should I be worried?? My son plays a Star Wars game on line that seems to make it become really hot. He says it skips during the game, so he gets out of the game. When I check the computer, everything is fine. Thanks!!

alb,
What you are experiencing is fairly commom. When our grandkids play games on our Mac, that's when things do get pretty warm, especially in the upper left hand corner where the CPU is. The imac does rely heavily on "heat sink" technology instead of high speed, noisy fans to keep things running properly. That being said, be sure to keep the vents that are located on the top back section of the computer screen, clean. This will allow for proper venting. If your son plays computer games long and often, you can keep a small external fan running in back of the Mac. This may be appropriate in the hot Summer, in a non air conditioned environment.
Wuz

TS1966 I cannot play video on safari but works fine on google chrome? What do i need to do to fix it?

I cannot play video on safari but works fine on google chrome? What do i need to do to fix it?

If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. Safari > Preferences > Extensions
It can also be installed as a plugin in /Library/Internet-Plug-Ins.
Try uninstalling the currently installled Flash plugin (required for most YouTube content) then reinstall new > Troubleshoot Flash Player | Mac OS
From your Safari menu bar top of your screen click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the menu bar click Develop > Empty Caches

Select query hangs on Oracle 9i but works fine in Oracle 8i

Hi Guys,
For a recap of what happened:
Migrated from Oracle 8i to 9i for a customer, all queries and statements are working fine, except for this particular query. If i run the same query on 8i it works like a charm.
In 9i, if i remove even one field from the query, it works else it just hangs.
Any idea, any one???
**Added 2:09PM: When i removed some ltrim and rtrim that i believe not necessary, the query works fine, is there any field length limitation in Oracle 9i???
Below is the query:
set pagesize 100;
set linesize 1024;
set heading off;
set echo off;
spool scb_xfer_hdr_npsx;
select ltrim(rtrim(to_char(hdr_srl_no,'99'))) || ';' ||
'P' || ';' || rtrim(ltrim(payment_type))|| ';'|| ';' ||
ltrim(rtrim(our_ref_no))|| ';'|| 'MY;KUL;' ||
     rtrim(ltrim(debit_account_no))||';'||
rtrim(ltrim(to_char(scb_batch_date,'YYYY/MM/DD'))) || ';'|| ';' ||
rtrim(ltrim(payee_name_1))|| ';'|| ';' ||
rtrim(ltrim(address_1))|| ';'||
rtrim(ltrim(address_2))|| ';'||
rtrim(ltrim(address_3))|| ';'|| ';' ||
rtrim(ltrim(payee_name_11))|| ';' ||
rtrim(ltrim(address_11))|| ';'||
rtrim(ltrim(address_21))|| ';'||
rtrim(ltrim(address_31))|| ';'|| ';' ||
     rtrim(ltrim(payee_bank_code)) || ';' || ';' ||
     rtrim(ltrim(payee_account_no)) || ';' ||
     rtrim(ltrim(our_ref_no2)) || ';' || ';' ||
     rtrim(ltrim(our_ref_no2)) || ';' || ';' || ';' || ';' ||
rtrim(ltrim(payment_currency))|| ';'||
rtrim(ltrim(to_char(payment_amount,'9999999999.99')))|| ';'||
     'C;P;;' || rtrim(ltrim(payee_bank_name))|| ';' ||
     'KL;;' ||
     rtrim(ltrim(delivery_method)) || ';' ||
     rtrim(ltrim(delivery_by)) || ';' ||
     rtrim(ltrim(counter_pickup_location))
from scb_xfer_hdr_npsx
order by hdr_srl_no;
select distinct 'T;' || ltrim(rtrim(to_char(total_payments))) || ';' ||
     ltrim(rtrim(to_char(total_pay_amount,'9999999999.99')))
from scb_xfer_hdr_npsx;
spool off;
spool scb_xfer_dtl_npsx;
select ltrim(rtrim(to_char(srl_no,'99'))) || ';' || 'I' || ';' ||
     ltrim(rtrim(doc_no)) || ';' || ltrim(rtrim(to_char(doc_date,'yyyy/mm/dd'))) || ';' ||
     ltrim(rtrim(doc_description)) || ';' ||
     ltrim(rtrim(to_char(doc_amount,'9999999999.99')))
from scb_xfer_dtl_npsx
order by srl_no;
spool off;
set echo on;
exit;
Message was edited by:
Logesh

Hi,
are you still on a 32bit kernel on AIX?
How are the Form4.5 connected, are they on the same box, or are they using the forms GUI?
What about the statistics, how do you collect them? Is the database set to the COST based optimizer?
Do you use dbms_utility.analyze_schema, or this:
exec dbms_stats.gather_schema_stats( -
ownname => '$OWNER', -
estimate_percent => 10, -
granularity => 'ALL', -
method_opt => 'FOR ALL COLUMNS SIZE 75', -
degree => NULL , -
options => 'GATHER $GATH', -
cascade => TRUE -
What does it mean the SQL hangs? Can you cancel the query? Do you have to kill the session? Do you use any diagnostic tools like TOAD to trace the session, see what it is doing? Usually if this is a performance/tuning issue, you will see the session is not dead, but you will see advancing reads.
Regards,
Richard.

Program Error from running the *,exe file but works fine running with CVI

When starting CVI created program on Win 2000, I get message “Program Error”.
I have created a program using NI/CVI version 5.5. I am running windows 2000, I get message
“Program Error"
*.exe has generated errors and will be closed by Windows. You will need to restart the program.
An error log is being created.”
It works fine when running directly from the compilier, but if I run just the *.exe I get this error. I never used to.
Please let me know if anyone else had this problem or knows solution.
Thank you very much.
Craig

In the debugger unitialized globals are initialized to zero, but not for a release .exe. So if you are checking whether a global pointer is NULL before it is set to a value by your application it will generally work fine in the debugger but may crash as a release configuration depending on what you use that pointer for. That's a common thing I have run into.

TS1363 my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help

my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
any thoughts anyone??

Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
I suggest that you begin by correctly identifying which iPod you have.
http://support.apple.com/kb/HT1353

My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

Superdrive no longer recognizes CD, but works fine with DVD

my Superdrive seems to have a problem recognizing any type of CD media, but works fine with DVD media.
I reinstalled Leopard and still the same problem. I also zapped the NVRAM (this is an Intel 2.0 Ghz Mac Mini w/ 2 GB Ram.
Is there anything else I can do or do I just need to replace the drive?

Typically when this sort of symptom appears, it relates to a hardware failure, either due to a faulty lens, or dirt. You might try a lens cleaner to ensure it is not the latter.
Since this is a 2.0GHz mini, it ought to be still under warranty - if that is the case it would be wise to have Apple, or an approved service provider, check it and undertake any necessary repairs.

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) env

Hello,
BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) environment
Step 1: Build a asynchronous BPEL process which has no extra node. Make and deploy it in 'local windows desktop SOA' server
The BPEL process has three nodes:
a. client - on the left side of the swim lane
b. receiveInput - first node in swim lane (client calls 'receiveInput')
c. callbackClient - second and last node in the swim lane ('callbackClient' calls client)
Step 2: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
Step 3: Now, I can see the successfully completed BPEL instance in the BPEL console.
Now,
Step 4: Deploy the same BPEL process (dummy asynchronous) in the SOA server (hosted in unix box)
Step 5: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
Step 6: I find that the BPEL instance appears to have ended in error (on the second node i.e. callbackClient )
With the following error message
+<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>9710</code>+
+</part><part name="summary"><summary>Invalid xml document.+
According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.2.4.b: The content of element 'DummyBPELProcessProcessResponse' is not complete. One of '{"http://xmlns.oracle.com/DummyBPELProcess":result}' is expected.
Please make sure that the xml document is valid against your schemas.
+</summary>+
+</part></invalidVariables>+
Has anyone faced similar issue as above ?
i.e. process works find in windows environment (local SOA), but fails in SOA server in UNIX environment
Appreciate your help in understanding this issue.
Thanks,
Santhosh

Hello,
The fix to this issue appears to have been as follows:
+<schema attributeFormDefault="unqualified"+
+     elementFormDefault="qualified"+
+     targetNamespace="http://xmlns.oracle.com/DummyBPELProcess"+
+     xmlns="http://www.w3.org/2001/XMLSchema">+
+     <element name="DummyBPELProcessProcessRequest">+
+          <complexType>+
+               <sequence>+
+                    <element name="input" type="string"/>+
+               </sequence>+
+          </complexType>+
+     </element>+
+     <element name="DummyBPELProcessProcessResponse">+
+          <complexType>+
+               <sequence>+
+                    <element name="*:result*" type="string"/>+
+               </sequence>+
+          </complexType>+
+     </element>+
+</schema>+
In DummyBPELProcess.xsd,
modifiying "result" to ":result" appears to have resolved the issue in SOA under unix environment.
If anyone can explain why "result" works in SOA under windows and ":result" works in SOA under unix environment, I would really appreciate your help.
Thanks,
Santhosh

Blackberry Playbook Overheated but works fine, screen is dark from edges about 1 inch and the rest is a light color

Similar Messages

Maybe you are looking for